Cannot type anything when access by consloe
after i have erased the start-up configuration file for 2950 series switch and try to access via console port i cannot type anything , at the same time the the console windows view the switch logging messages , like while the IOS is loading and all of the information about the system .
can anybody tell me what is the problem ?
I have seen symptoms like what you describe when a port was configured with "no exec". You might get these symptoms is the terminal emulator is configured with flow control (I believe the console port does not support flow control). I have also seen symptoms like this when the pinout on the console cable was close but not quite correct. And I have seen symptoms like this when the console port was bad.
I am not sure which (if any) of these might be your situation. My first suggestion would be to try a different console cable. And check the terminal emulator to be sure that it is not configured with flow control activated. If that does not help then you might try doing the password recovery procedure to see if perhaps it is configured with no exec. And if those do not work you might try opening a case with TAC for a possible hardware problem.
HTH
Rick
Similar Messages
-
whenever i type something in google or any other website a find tab pink colour comes beneath the screen and i cannot ype anything on google. whatever i type goes in the find tab and i cannot type anything on website......plz help
== This happened ==
Every time Firefox opened
== 10 days agoDo a malware check with a few malware scan programs.
You need to use all programs because each detects different malware.
Make sure that you update each program to get the latest version of the database.
http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
http://www.superantispyware.com/ - SuperAntispyware
http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]] -
My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?
Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD -
updated ipad to latest iOS 7.0.2 now cannot type anything with ease...delayed type
Reset all settings
Settings>General>Reset>Reset All Settings -
Cannot print anything when using safari
Cannot print anything when using safari. OSX is Mavericks. Printer is Canon MP620. Have downloaded Mavericks software for printer, but still will not print. I have also repaired the disk hoping that would solve the problem, but to no avail. Can anyone help me please?
Hey ivorfromborehamwood,
Thanks for using Apple Support Communities.
For more information, take a look at:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Have a nice day,
Mario -
Cannot write anything when terminal asks for password
I try to uninstall a F-secure product with uninstaller but when prompted about password I cannot write anything there
Cannot write anything when terminal asks for password
When using sudo in Terminal, which requires a password, typing the password will not show as asterisks. It does not visually echo the keystrokes, but it is accepting them.
Just carefully type the password, and press Return when finished, -
Page cannot be found when accessing Web Dypro on Citrix Netscaler.
Hi Everyone,
Has anyone tried using Web Dypro Web Application on Netscaler?
We have a Web Dynpro application on SAP Enterprise portal that are being hosted by our SSL-VPN (Citrix Netscaler) but when we try accessing our Web Dynpro to our Safari Ipod it pop-up page cannot be displayed. But when accessing it to a normal browser all the pop-ups are accessible and working.
Regards,
Michael Mondelo.Hi,
I've tried to update the firmware but when connecting to Netgear it replies 'there is no firmware update available' so I guess it's up to date. Just wondered if I should change any of the router settings from auto to manual?
Although I'm not sure what I should change.
It's a netgear n150 with adsl2+ -
Cannot type anything in TextInput using Firefox Mac Version
Hello,
I tried to practice the example in the chapter 12 of Flex2
Getting Started Document.
It is fine using IE, Firefox (Windows), and Safari, however I
can not type anything in the TextInput through Firefox Mac version!
It is also fine when I directly open the SWF file.
Does anyone know what's happened ?
Thank you very much !Some have reported that pressing F9+Windows one or more times has worked to fix issues with the keyboard not working.
*[[/questions/947513]] -
Cannot hear anything when calling with iPhone 4
I've had my iPhone 4 just over a year and for the past week or so I haven't been able to hear anything when making or recieving calls. Also when going to answer a call it freezes and shuts itself down. I have done the restore and also restored it from new loosing my stuff and this still hasn't fixed it. It also doesn't have any sound when using headphones either. Anyone have any ideas or advice?? Thanks
Sometimes if you are nice to them they will replace it even if it is out of warranty. And if they won't there is a flat fee of $149 to replace it.
-
UWL giving "Page Cannot be Displayed" when accessed through Internet
Dear all,
We have exposed our portal to Internet and are currently testing the functionality.
All applications are working fine except UWL and Identity Management. UWL is working fine if I'm not using the Webdynpro UI for display.
Later we checked. Only the Webdynpro based applications are having problem when accessing through Internet.
What can be the reason for this? Please help. We are stuck up because of this.
Best Regards,
Aparnna
Edited by: Aparnna Prasad on Aug 13, 2008 2:48 PMDear Aparna,
Please check the following things
1. Enter the Hosts enteries of R/3 and EP server.
2. Try to ping the r/3 & EP server outside your network.
Regards
Ponnusamy -
In Finder, I have periodically a "shared" PC showing up, I have Java. When i click on the shared PC, no information is avaiable, just
hp3cd92ba6f70c. I have tried removing it from finder from the previuos discussions instuctions but cannot. I have two mac laptops, Ipad and two iphones that connect wifi. Not a PC in the house., Ideas? do they have access to my computer? Has someone broken through to my wifi?When you turn on your Mac is will search for any computers that it's possible to connect to. You can't connect with any of them unless you and other computer user set up a sharing network.
It's like looking through a window. You can see someone on the other side but can't communicate with them unless you open the window and shout at them. -
This is on my desktop PC running Windows XP. Have used Firefox successfully for a couple of years. This problem was first noticed on 1/18/2012.
Logging off and logging back into AOL does not fix it. Closing and re-opening Firefox does not fix it. Shutting down and rebooting the PC does not fix it.
Thanks for any help/explanations.Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
This is a new problem. It happens every time I search on my google homepage. I am running Windows 7 Home Premium Version 6.1 on a desktop.
It does not happen if I open Google with IE.Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
Nokia N95 8gb cannot hear anything when I call out...
When making calls to other mobiles I cannot hear the ringing or the other person but they can hear me. This is very frustrating and costs me a lot of money because it takes four calls to get it to work correctly.
I have tried switching to loud speaker and that does not work. I have the latest software.
There is no noise at all, no ringing, no talking from the other side. The person on the other side can definately hear me though.
It is weird because it works fine on the third or fourth try.
Please help, I dont want to send my phone away to be repaired unless necessary.hi,
you might want to try the following 1st...
re-start your phone, just turn it off and turn it on again
if that doesnt help then you can try this more drastic measure, but 1st make a backup of your phone's content by going to the memory card and make backup and/or use Nokia PC suite to make a backup, then try the Soft Reset or Hard-Reset: Remember to backup specially for hard-reset, all your phone's content will be erased.
FOR SOFT-RESET:
- at Standby Screen type-in => *#7780#
It will ask for “Restore all phone settings-phone’ll restart….”
Then it asks for security code enter factory default => 12345
FOR HARD-RESET:
- at Standby Screen type-in => *#7370#
It will ask for “Restore all phone settings-phone’ll restart….”
Then it asks for security code enter factory default => 12345
if this doesnt help contact Nokia Care Point-> http://europe.nokia.com/A4388379
if you are not comfortable with the hard-reset and it is easy for you to go to the nearest Nokia Care Point, then just go there for help... -
Can't "type" anything when trying to send an e-mail.
For about 12 hours I have been unable to create a new e-mail or respond to an incoming one. Nothing happens when I try to type in an address or a message.
emmazell33 wrote:
Am trying to send an e mail with an attachment from i works. I can't find the document I wrote. Where is it?
Wherever you saved it. Likely, Documents folder.
Maybe you are looking for
-
Musish - a dynamic and extensible music library organizer (in CLI!)
Note: this program is deprecated and has been superseeded by Demlo. Musish organizes your music library automatically and dynamically. It runs a user-defined script using variable such as tags and file properties. This way it yields virtually unlimit
-
N95 8Gb phone via 3 with a promotional deal of the...
Dear All, I received my N95 8Gb phone via 3 with a promotional deal of the Spiderman 3 movie already installed. Unfortunately the movie was not pre-loaded onto my phone. Your Nokia service team (UK) advised me to contact 3, who told me to contact Nok
-
Easiest to migrate MS Acess application to Oracle forms/reports
Hi, I have one application in MS Acess I want to migrate it to Oracle forms 10g, is there any easy way to do this job starting from schema creation upto front end. Thanks and Regards, Khawar.
-
Changing the text symbols in the logon language
Hi... I want a text symbol to have description in malay. I logged in to the R/3 system in malay language and went into the text symbols space of the respective program which is in SAPLHRHAP_C_IF_DOCUMENT in my case. I need to change the text symbol B
-
Hi, I have badi and subscreen for me. Designed the subscreen which to be displayed now my question when i am adding the detail of the subscreen in the badi . It gives an '<b>Please enter the name of the callling screen are</b>.please let me if