Cannot type Chinese char in some apps after upgrade the system to iOS 5.

在升級至ios5之後，部分軟體無法用中文鍵盤

I already have radeon.modeset=0 on the end of my kernel line, I think I disabled KMS a month or two ago when it was (very briefly) enabled by default. IIRC my system was very broken with KMS enabled back then, I haven't tried turning it back on.
I've found xf86-video-ati-6.12.4-3 to work, and xf86-video-ati-6.12.192-1 not to work, irrespective of ati-dri version. I've just noticed 6.13 seems to be out, so I may try building that with ABS, and see if it fixes it.
EDIT: or maybe I won't, as that needs xorg 1.8 and I don't have enough time to build that and all it's deps just now
For now I've just set pacman to ignore the package, which works as a temporary solution. Are there any diagnostics I can do to help pin down the problem?
Last edited by Jack B (2010-04-20 22:05:07)

Similar Messages

I cannot download or updates any apps after upgrading the newest ios .. it show offers In-Apps Purchase... anybody can help me ?

i cannot download or updates any apps after upgrading the newest ios .. it show offers In-Apps Purchase... anybody can help me ?

This is happening to me too. I'm looking for anyway to fix this its getting very annoying not being able to update apps.

After upgrade the ipad2 to ios 5, my pages files in my ipad is missing? How can get back?

After upgrade the ipad2 to ios 5, my pages files in my ipad is missing? How can get back?

azwanelias wrote:
my iphone 5s is jammed after downloading IOS 8.0.2 and now i cant use my iphone and it has the sing of itubes in RED which is wired how can i get my phone to work? and its not letting me restore on itunes of my PC
I don't really understand your comment about "sing of tubes in RED which is wired". But if you are referring to the display of iTunes and the USB port that is an indication that you must restore your iPhone by connecting it to your computer via USB and then using iTunes on the computer to restore it.

Problem with some apps after upgrade to 5.1 (can I downgrade it to 5.0 ??)

Dear all,
I'm experiencing some problems with apps after upgrading to 5.1, some of them just got stucked or not even start up. Is there a way of fixing this or downgrade to 5.0 ??
Thanks

you cannot downgrade, sorry.

S-660 Unable to use Sd card after upgradeing the system to KitKat

Iam unable to use the Sd card after updateing the system to KitKat, 8gb card, its says insert Sd card, it was working porperly till i updated the system,pleses let me know how can i use the sd card ,i came to know kitkat u dont have option for external storage

Even gone in System Information Panel...
Model: Mid 2012 Retina Macbook Pro 15"

Some errors after doing the system copy for DB2 database instance

HI,
Recently we have transferred the DB2 database instance from old host( db 9.1.7 under windows 2003 R2) to new host( DB2 9.7.9 under windows 2008 R2) using the system copy database depending methods.
Currently system is:
* ECC 6.0 under NW 7.0 SR3
* Kernel : 7.20
* Basis: 7.0 with support package level 17
*application instance connecting db instance via DB2 CLI
1) a) After log in system using the T-code: SM21 to read the system log, it will record the bellow error:
     b) From the log taken from log fie: dev_w*, i also found the below error:
A ABAP Program SAPMSSY2                                .
A Source RSBTCTRC                                 Line 60.
A Error Code DBIF_RSQL_SQL_ERROR.
A Module $Id: //bas/720_REL/src/krn/runt/absapsql.c#28 $ SAP.
A Function ab_HandleRsqlErrors Line 716.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A SQL error in the database when accessing a table..
c) any background job will be cancelled when it is running. I think the error is related to above mentioned issue.
2) If i go to T-code: DB13---Diagnostics----db2 logs, it will come out the below error:
Thanks.

HI Manas,
Yes, this problem is with particular this table.
Refer to below error coming from db2diag.log when i access the table:BTCCTL:
2014-08-12-17.52.08.866000+480 I35784932F1196     LEVEL: Severe
PID     : 3380                 TID : 2676        PROC : db2syscs.exe
INSTANCE: DB2DV1               NODE : 000         DB   : DV1
APPHDL : 0-127                APPID: *LOCAL.DB2DV1.140812095207
AUTHID : DB2DV1
EDUID   : 2676                 EDUNAME: db2agent (DV1) 0
FUNCTION: DB2 UDB, data management, sqldSetupIndexScan, probe:1873
MESSAGE : ZRC=0x82040001=-2113667071=SQLD_NONSEVERE_PRGERR
          "non-severe dms programming error"
          DIA8532C An internal processing error has occurred.
DATA #1 : String, 39 bytes
Specified index not found for scan open
DATA #2 : String, 12 bytes
sqldScanOpen
CALLSTCK:
[0] 0x000000018010E989 pdLog + 0x353
[1] 0x0000000003ABE3C2 sqlzSetAndLog901 + 0x192
[2] 0x0000000001E61F01 sqldSetupIndexScan + 0xF37
[3] 0x0000000001E5F5CC sqldScanOpen + 0xBEE
[4] 0x000000000334F460 sqlriopn + 0x316
[5] 0x00000000034AE788 sqlritaSimplePerm + 0x252
[6] 0x000000000336AC8B sqlriSectInvoke + 0x139
[7] 0x00000000030A6F0C sqlrr_process_fetch_request + 0x1A8
[8] 0x00000000030A2902 sqlrr_open + 0x534
[9] 0x000000000223FCCB sqljs_ddm_opnqry + 0x447
2014-08-12-17.52.08.866000+480 I35786130F533      LEVEL: Error
PID     : 3380                 TID : 2676        PROC : db2syscs.exe
INSTANCE: DB2DV1               NODE : 000         DB   : DV1
APPHDL : 0-127                APPID: *LOCAL.DB2DV1.140812095207
AUTHID : DB2DV1
EDUID   : 2676                 EDUNAME: db2agent (DV1) 0
FUNCTION: DB2 UDB, data management, sqldSetupIndexScan, probe:1873
DATA #1 : unsigned integer, 4 bytes
10
DATA #2 : unsigned integer, 4 bytes
1704
DATA #3 : unsigned integer, 2 bytes

[solved] Graphics broken in some apps after upgrade

I did a fairly big upgrade a few day back, after travelling around away from decent internet. Since the update some of my apps (so far, Firefox, Thunderbird, gnome system monitor but not sunbird) display a completely garbled interface. The window decoration is fine in most, but not all, cases, but everything else is bad:
Firefox still works - the box near the cursor is the search box on the google homepage. If I tab through to it I can search and the window title changes accordingly.
So far I've tried:
1) deleting my xorg.conf
2) rolling back (which fixes the problem)
I tried re-adding packages a few at a time, but that didn't work - the problems didn't come back till the next reboot or possibly the next restart of X. And I broke pacman in the process, so I'm reluctant to try again.
As I suspect this is hardware dependent, I'm running a IBM TP41 which has a ATI Mobility Radeon 7500, and I'm using the open source video drivers, not flgrx.
I'm more or less out of ideas, so your help is appreciated.
Edit: It's getting late in my timezone. I'll check back tomorrow.
Edit2: added solved to title
Last edited by Jack B (2010-04-21 19:52:05)

I already have radeon.modeset=0 on the end of my kernel line, I think I disabled KMS a month or two ago when it was (very briefly) enabled by default. IIRC my system was very broken with KMS enabled back then, I haven't tried turning it back on.
I've found xf86-video-ati-6.12.4-3 to work, and xf86-video-ati-6.12.192-1 not to work, irrespective of ati-dri version. I've just noticed 6.13 seems to be out, so I may try building that with ABS, and see if it fixes it.
EDIT: or maybe I won't, as that needs xorg 1.8 and I don't have enough time to build that and all it's deps just now
For now I've just set pacman to ignore the package, which works as a temporary solution. Are there any diagnostics I can do to help pin down the problem?
Last edited by Jack B (2010-04-20 22:05:07)

Problem to update apps after upgrading iPhone 4 to iOS 6.1

I have iPhone 4 and I upgraded to iOS 6.1, i cant update any apps from the appstore. the tab is blank even that i see that there are apps that need to be updated, do you know what can make this problem?

That error means you're trying to purchase content in a country where such content is not sold by Apple, & Apple's servers have detected your location, generating that error code.
There is no workaround.

Cannot type chinese word....=)

After i updated my phone(Sony Ericsson Xperia X10),i cannot type chinese alrdy......
Can anyone help me or teach me how to do???

If you press and hold on a text box, you should get a pop-up that included "Input Method". Tapping this will reveal all available keyboards on your phone. You could always get a Chinese keyboard in the Android Market

I can't find some installed apps after upgraded to iOS6.0.1 by sync from iTunes

I can't find some of installed apps after upgraded to iOS6.0.1 by sync fom iTunes. when i try to download them from app store again, it shows OPEN button only but not INSTALL button. is there anyone got this problem too?
I use iPhone 4s.

thanks for ur reply, i tried restart my phone, the most used apps back now. anyway, thank u!
sberman wrote:
If you know where the app is (in a folder, for example), go to that folder and find the app there.
Maybe you tried holding the app down in the search screen. I didn't say clearly you have to go to the app eherever it is, but not in the search screen.

After upgrade iphone 4 to ios 5.01 itunes don't install some apps.

After upgrade iphone 4 to ios 5.0.1 itunes don't install many apps (ibooks too).
I try to delete them from itunes, download again and sinc with iphone, but it fail with the same message: "app_name Failed to install".
Only some Apps were correctly installed (about 1 every 8 apps).
The only way to install apps with errors is to download them directly from iphone. How to resolve this iusse?
I can't download again all apps from iphone.
Itunes is the lastest version and the Pc is on windows 7.
I had some trouble to upgrade to ios 5 (error 1 and 37 and so on) because security problem on win 7, but I relsoved them.
Thanks for your help.
Fabio

Bonjour, Here is the trooubleshooting document
http://support.apple.com/kb/TS1538?viewlocale=en_US&locale=en_US
Bonne Chance

Cannot type chinese traditional into Facebook.

hi, i cannot type chinese traditional into facebook

Hi Jason,
First of all, I am not familiar with MS .NET Managed Provider for Oracle or Oracle Managed Data Provider.
How did you insert these Simplified Chinese characters into the NVARCHAR2 column ? Are they hardcoded as string literals as part of the SQL INSERT statement ? If so, this could be because, all SQL statements are converted into the database character set before they are parsed by the SQL engine; hence these Chinese characters would be lost if your db character set was WE8MSWIN1252 but not when it was ZHS16CGB231280.
Two workarounds, both involved the removal of hardcoding chinese characters.
1. Rewrite your string literal using the SQL function UNISTR().
2. Use bind variables instead of text literals in the SQL.
Thanks
Nat

After upgrading iphone 5 to iOS 7, I cannot install new apps

After upgrading iphone 5 to iOS 7, I cannot install new apps. I get the message that I must first read and agree to iTunes terms and conditions. I read the terms and conditions online, but I don't see a way to agree when I install or re-install iTunes 11.1. I can update existing apps ok, though.
Anyone have this problem and find solution?

Delete & ReInstall the App Store...

Cannot navigate in 3G with my IPAD after upgrading to firmaware 4.3.5(8L1)

All,
I have an issue with my ipad after upgrading the firmware to V 4.3.5 (BL1) : I cannot navigate in 3G any more even if I get a good signal.
After a while I get the message (Impossible to connect to the server)
I am using a microsim provided by an italian operator called "Tre" (http://www.tre.it/promozioni/internet-mobile/ricaricabile-per-ipad?gclid=CNXtxeD z3asCFRpggwodqCNTRw )
Note: i had no problem before of the upgrade
Reading some italian forum I saw this is a software bug and it will be apple resposability to fixing it in pacth and the issue might occurs with other operator as well
Xref http://www.iphoneitalia.com/forum/generale-iphone-3gs/75009-problema-con-rete-tr e.html
Xref http://www.iphoneitalia.com/problemi-in-3g-con-vodafone-dopo-laggiornamento-a-io s-4-3-218559.html
Anybody know anytyhing about this?
thx
tony

iPadCKQ-
You may have purchased a used iPad that someone had returned. Perhaps iOS 5 will allow you to operate it out-of-the-box, but in that past you had to activate it using iTunes on your computer.
Or maybe someone swapped iPads with you when you weren't looking?? Try running the Settings App. Go to Settings-General-About. Is the Name correct or someone elses? What version is listed there?
Fred
Message was edited by: Fred*M.

After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Cannot type Chinese char in some apps after upgrade the system to iOS 5.

Similar Messages

Maybe you are looking for