Cannot type in webpage

Since installing Mountain Lion, I have this SERIOUS problem. Whenever I tried to type something in an open web page, for example signing up new accounts, type in my credit card details at checkout, update my facebook status .... Beach-ball keeps appearing and the whole page freezes, it takes about 10 seconds for it to unfreeze, and when I type the next letter, beach ball keeps appearing again.
I tried safari, firefox, chrome, and same thing happens.
it's frustrated because it would take me 10 mins just to type 1 sentence.
Was wondering if anyone has the same problem.
This is Apple's worst upgrade ever, I have never experieced anything like this with my Mac pro before.

I've been having the same exact problem! It took me like five minutes to even make this account just now because my computer kept freezing and beach balling every time I tried to input my email or username. I can't find any information on how to fix it, I'm absolutely infuriated. Can't believe I paid $20 for this.

Similar Messages

  • WRT300N v1 Internet Explorer cannot display the webpage

    An intermittent problem occurs where occasionally during browsing the web I'll get an Internet Explorer "cannot display the webpage" and then I reload the page and often it works on the reload.  The problem is very frequent and so nearly every webpage I try to open I have to reload in order to access it. 
    A temporary fix is unplugging the WRT300N v1 and plugging it back in.  For a while, it works fine, but eventually the problem creeps up again.
    I have firmware v 1.03.3
    I've got two laptops, one Mac running OS 10.x and one Dell running Vista.  I also have a desktop PC running XP.  The two laptops use the wireless connection.  The PC uses a wired connection.  All 3 computers experience this same problem browsing web pages.
    I've  read the forums and mostly I've seen people talking about problems with the WRT300N v1 as far as the wireless connection, but this time I'm having issues even with the wired connection, so I feel that this issue isn't addressed, or at least I haven't found where it was addressed.
    How do I fix this issue permanently?

    I too am having the same problem. I used another system with IE7 installed and found that many sites that were "unable to be displayed" were accessed with IE7 on a differant computer system running Windows XP.
    I realize it could be a router thing as well....but after i went through all the tech help i could find online it still did not solve the problem. I decided to work it out myself.
    I found my solution when trying to go to sites with mp3 files on them.  Thats when i discovered that with Windows Vista I had to manually select what program applications would be used to perform IE7 features (webpage content) in order for the pages to load properly.
    To do this in Windows Vista - just go to Start / Program Defaults / Set Program Access and defaults  From there you can select which programs to open if IE7 cant handle the file extention on its on.  That was my problem all along.
    You may have to go as far as setting your file associations in Windows Explorer.  Windows Vista had set the file extension .php to open with Windows Photo Gallery.
    I am still going through all the file types and finding file extentions that are configured wrong within Windows Vista.
    UPDATE:  I had problems opening webpages from links from online searches that were within various forums and also on websites that required a login but popup a separate window to login to.  I don't know if you have the same problem with these sites.
    I uninstalled a Windows Update (kb927143) and can now access those.  I know this could be risky but I still have my firewall and antivirus running. Until IE7 is fixed its the only choice I have.
    To do this in Vista....go to Control Panel ... Programs and Features...then click view installed updates.  You will find it there if you have it installed.  From there you can uninstall it.
    Hope this helps you to solve your problem.
    Message Edited by nannahawktx on 08-27-2007 09:02 PM

  • ACE 4710 - Internet Explorer cannot display the webpage randomly

    We have a ACE 4710 with a basic config, (see below).
    When clicking on a tab from a window within Interent explorer we occasionally get an issue with it returning: "Internet Explorer cannot display the webpage" The details show "Access is denied" accessing a particular line of a javascript file.
    We have put one web server out of service in the farm to make sure that this isn't a result of stickyness not quite working.
    We have tested extensively by going directly to the web server directly without the load balancer and cannot reproduce the problem but we can produce the issue within a few minutes when going to the load balanced address.
    Thanks in advance for any advice.
    HOST-1/Admin# show run
    Generating configuration....
    logging enable
    logging fastpath
    logging standby
    logging timestamp
    logging trap 6
    logging history 6
    resource-class SLB_ResourceClass_T_R
      limit-resource all minimum 10.00 maximum unlimited
    resource-class sticky
      limit-resource all minimum 10.00 maximum unlimited
    boot system image:c4710ace-t1k9-mz.A5_1_2.bin
    peer hostname HOST-2
    hostname HOST-1
    interface gigabitEthernet 1/1
      switchport access vlan 1000
      no shutdown
    interface gigabitEthernet 1/2
      shutdown
    interface gigabitEthernet 1/3
      description LB003
      switchport access vlan 1
      shutdown
    interface gigabitEthernet 1/4
      description LB004
      switchport access vlan 2
      shutdown
    interface port-channel 1
      port-channel load-balance src-dst-port
      no shutdown
    clock timezone standard GMT
    switch-mode
    context Admin
      description SUTLB01
      member SLB_ResourceClass_T_R
    access-list ALL line 8 extended permit ip any any
    access-list ALL line 16 extended permit icmp any any
    access-list everyone line 8 extended permit ip any any
    access-list everyone line 16 extended permit icmp any any
    probe tcp probe_tcp_80
      port 80
    rserver host Server_S_W301
      description Server_S_W301
      ip address x.x.32.152
      inservice
    rserver host Server_S_W302
      description Server_S_W302
      ip address x.x.32.154
      inservice
    serverfarm host sfarm_T_R
      description sfarm_T_R
      predictor leastconns
      probe probe_tcp_80
      rserver Server_S_W301 80
      rserver Server_S_W302 80
        inservice
    sticky http-cookie Cookie1 T_R_sticky_cookie
      cookie insert browser-expire
      timeout 3600
      serverfarm sfarm_T_R
    class-map match-any T_R_L4Class
      2 match virtual-address x.x.33.150 tcp eq www
    class-map type management match-any remote_access
      2 match protocol xml-https any
      3 match protocol icmp any
      4 match protocol telnet any
      5 match protocol ssh any
      6 match protocol http any
      7 match protocol https any
      8 match protocol snmp any
    policy-map type management first-match remote_mgmt_allow_policy
      class remote_access
        permit
    policy-map type loadbalance first-match T_R_L7policy
      class class-default
        sticky-serverfarm T_R_sticky_cookie
    policy-map multi-match T_R_L4Policy
      class T_R_L4Class
        loadbalance vip inservice
        loadbalance policy T_R_L7policy
        loadbalance vip icmp-reply active
        nat dynamic 2 vlan 1000
    interface vlan 1000
      ip address x.x.33.148 255.255.254.0
      access-group input ALL
      nat-pool 2 x.x.33.151 x.x.33.151 netmask 255.255.254.0 pat
      service-policy input remote_mgmt_allow_policy
      service-policy input T_R_L4Policy
      no shutdown
    ip route 0.0.0.0 0.0.0.0 x.x.32.1
    ssh key rsa 1024 force

    +------------------------------------------+
    +-------------- HTTP statistics -----------+
    +------------------------------------------+
    LB parse result msgs sent : 421347     , TCP data msgs sent       : 2099597
    Inspect parse result msgs : 0          , SSL data msgs sent       : 0
                          sent
    TCP fin msgs sent         : 6169       , TCP rst msgs sent:       : 769
    Bounced fin msgs sent     : 5          , Bounced rst msgs sent:   : 1
    SSL fin msgs sent         : 0          , SSL rst msgs sent:       : 0
    Drain msgs sent           : 337811     , Particles read           : 5040829
    Reuse msgs sent           : 0          , HTTP requests            : 342499
    Reproxied requests        : 183422     , Headers removed          : 37475
    Headers inserted          : 342124     , HTTP redirects           : 0
    HTTP chunks               : 224859     , Pipelined requests       : 71466
    HTTP unproxy conns        : 267246     , Pipeline flushes         : 0
    Whitespace appends        : 0          , Second pass parsing      : 0
    Response entries recycled : 71302      , Analysis errors          : 0
    Header insert errors      : 22         , Max parselen errors      : 215
    Static parse errors       : 99         , Resource errors          : 0
    Invalid path errors       : 0          , Bad HTTP version errors  : 0
    Headers rewritten         : 0          , Header rewrite errors    : 0
    SSL headers inserted      : 0          , SSL header insert errors : 0
    SSL spoof headers deleted : 0         , Unproxy msgs sent         : 267246
    HTTP passthrough stat     : 0
    NOTE - We did turn on caching at one point to try and resolve the issue but it has since been turned off

  • I'm using Firefox 5.0 and I cannot type a value into a drop down menu.

    There is a webpage with a drop down menu box.
    When I open the page with IE, I can choose from the listed values OR type my own value,
    When I open the page with Firefox, I can only choose from the listed values BUT CANNOT type my own value.
    The page is on my company and so I am sorry that I cannot show it to you guys at the moment.
    Is there anything I can try modifying so that I can make the box typable?

    Go to Options > Advanced > General and uncheck the "Use hardware acceleration when available"
    Hope this will solve your problem :)

  • Internet Explorer Cannot Display This Webpage

    Hi,
    My issue is that when ever user is clicking link or submit a form, sometimes instead of directing to a new page, it will show the internet explorer error page 'Internet explorer cannot display this webpage'. I didnt find any error message in the log in cf admin as well as IIS admin. Then I checked with a simple HTML page which refreshes in every 3 minutes. I found that this page is also showing the same issue. So I think the issue is not related to Coldfusion. Still the issue persists. So does anybody have any idea about this? Please advice. Thanks in advance.
    The details are: And also the application is hosted in virtual machine.
    Server Product
    ColdFusion
    Version
    9,0,0,251028  
    Edition
    Standard  
    Serial Number
    Operating System
    Windows 2003  
    OS Version
    5.2  
    Adobe Driver Version
    4.0 (Build 0005)  
    JVM Details
    Java Version
    1.6.0_17  
    Java Vendor
    Sun Microsystems Inc.  
    Java Vendor URL
    http://java.sun.com/
    Java Home
    D:\ColdFusion9\runtime\jre  
    Java File Encoding
    Cp1252  
    Java Default Locale
    en_GB  
    File Separator
    Path Separator
    Line Separator
    Chr(13)
    User Name
    SYSTEM  
    User Home
    C:\Documents and Settings\Default User  
    User Dir
    D:\ColdFusion9\runtime\bin  
    Java VM Specification Version
    1.0  
    Java VM Specification Vendor
    Sun Microsystems Inc.  
    Java VM Specification Name
    Java Virtual Machine Specification  
    Java VM Version
    14.3-b01  
    Java VM Vendor
    Sun Microsystems Inc.  
    Java VM Name
    Java HotSpot(TM) 64-Bit Server VM  
    Java Specification Version
    1.6  
    Java Specification Vendor
    Sun Microsystems Inc.  
    Java Specification Name
    Java Platform API Specification  
    Java Class Version
    50.0  

    Seems like an issue with the web server or, perhaps, even your browser. To start with, make sure you have followed the steps for configuring IIS in ColdFusion 9. Next, make sure the MIME type for HTML files in IIS 6 is text/html, not text/htm.

  • I cannot type a capital i using the left shift key. also keyboard now putting the cursor in a different place than where i type. Checked speech keys, all fine. Batteries fine.

    i cannot type a capital i using the left shift key. also keyboard now putting the cursor in a different place than where i type while i am typing. Checked speech keys, all fine. Batteries fine. Also used the keyboard check program on the imac, shows key ok.
    wireless mouse will suddenly scroll down horizontally and won't stop. when i am on a webpage it will bounce back to the previous page without my doing so. i have tried adjusting the mouse several times, turning it on and off, and now am using my wacom mouse which also seems to have issues with this computer.  i have only had this a few months and getting very frustrated.

    Can you try a different keyboard to see if the problem persists? Also, you have 90 days of phone support when you buy a mew mac.

  • Error message "This program cannot display the webpage when uploading images to Cafe Press

    I have had a Café Press shop for five years and except for sometimes being slow, no problems uploading images. Now, suddenly for 3 days I get the message "This program cannot display the webpage
    Most likely causes:
    • You are not connected to the Internet.
    • The website is encountering problems.
    • There might be a typing error in the address.
    What you can try:
    Check your Internet connection. Try visiting another website to make sure you are connected.
    Retype the address."
    I got the messsage about half way through the uploading of an image. People suggested using "firefox" instead of IE so I now get a similar error message from Firefox. I signed in, clicked on the image I wanted to upload and hit "upload" and get message as follows:
    Server not found
    Firefox can't find the server at members.cafepress.com.
    * Check the address for typing errors such as
    ww.example.com instead of
    [url=http://www.example.com]www.example.com[/url]
    * If you are unable to load any pages, check your computer's network connection.
    * If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
    None of this makes sense because I WAS connected to the internet (obviously) or I wouldn't have been able to sign in, go to my media basket, browse for the image and click "upload" and watch as the progress bar showed percentage of upload such as 20%, etc. and even went to 100% at times before giving me the error message. Plus I couldn't make a typing error since I wasn't typing anything but uploading an image. Any suggestions?
    Whatever your suggestion, I need step by step instructions as I am totally computer illiterate. I don't even know what a "proxy" is and don't know if I have a "firewall" as the message suggests. I have "Comodo" security and am using Windows XP.
    I contacted CP which was no help at all. All they did was tell me to clear my cache which I do after every session. Thanks
    Nancy
    http://www.cafepress.com/calendarflr

    Sounds like your desktop application is in fact running from
    a server. CHMs were identified as a security risk by Microsoft and
    are best suited to the user's PC.
    Click
    here for more information.

  • I am trying to access a webpage but it keeps saying I need a client certificate. Even after I click 'continue', I still cannot access the webpage.

    I am trying to access a webpage but it keeps saying I need a client certificate. Even after I click 'continue', I still cannot access the webpage.

    https://etivity.sul.com.au/
    It's to access my work rosters.

  • We cannot type Polish (non-latin) characters in WebDynpro applications

    We cannot type Polish (non-latin) characters in WebDynpro application (in runtime) because 'Browser Help Shortcuts' are fired.
    To type a polish character in polish keyboard you need to press AltGr + letter (ie. AltGr + a/c/e/s/o/l/z/x/n). To type an uppercase polish character you need to press AltGr + Shift + letter. This comination is in fact the same as pressing Alt + Ctrl + Shift + letter (because AltGr produces Alt + Ctrl) and it fires some of 'Browser Help Shortcuts'. For example AltGr + Shift + O should produce a letter O with a dash on it's top but instead it fires 'Show nesting of HTML containers'.
    We tried to turn off sap-wd-lightspeed, but then other key combinations are reserved for u2018Browser Help Shortcutsu2019.
    We need to be able to use AltGr + Shift + a/c/e/s/o/l/z/x/n in runtime.
    Product: SAP NW 7.11 SP04
    WebDynpro for Java
    I hope there is a somewhere a hidden parameter that solves our problem Maybe we're in some kind of debug mode?
    Thanks for your help!!

    The funny thing is that bold font [when message unread in message list] shows OK, ie in greek, but when i click on unread message, it is assumed to have been read, so it changes over to medium [non bold] and the encoding changes as well into the one that is not greek and thus unreadable.  In ~/.sylpheed/sylpheedrc the fonts are:
    widget_font=
    message_font=-microsoft-sylfaenarm-medium-r-normal-*-*-160-*-*-p-*-iso8859-7
    normal_font=-monotype-arial-medium-r-normal-*-12-*-*-*-*-*-iso8859-7
    bold_font=-monotype-arial-bold-r-normal-*-12-*-*-*-*-*-iso8859-7
    small_font=-monotype-arial-medium-r-normal-*-12-*-*-*-*-*-iso8859-7
    In /etc/gtk, for gtk1.2 apps the file refering to greek encoding [el] seems to be fine [exactly the same as in slackware 9.1].

  • Internet Explorer7 cannot display the Webpage in forms 10.1.2.3

    Hi all,
    I have installed forms 10.1.2.0.2 to my laptop under Windows Vista Home Premium and followed the following steps :
    1- changed virtual memory to (minimum of 2048 and maximum of 4096)
    2- I updated forms 10.1.2.0.2 it to forms 10.1.3 using pathch 3 (patch ID 5983622)
    3- I changed the application server Url in forms builder by choosing Edit, preferences, runtime and click on "Reset to default" button and added ?config=jpi at the end of the line.
    when i run the form I got the message "Internet Explorer cannot display the Webpage"
    when I called the link http://Computer_name:8889/forms/frmservlet?config=jpi
    I got a message asking me to allow downloading java plug-in 1.4.2 ( which I know that it is not certified with Vista), So i refused downloading and updated the formsweb.cfg file as Steve Cosner said in his thread Vista Jinitiator problem
    and added these new lines to the formsweb.cfg file:
    [[jdk15]]
    jpi_classid=clsid:CAFEEFAC-0015-0000-FFFF-ABCDEFFEDCBA
    jpi_codebase=http://java.sun.com/update/1.5.0/jinstall-1_5_0_12-windows-i586.cab#Version=1,5,0,12
    jpi_mimetype=application/x-java-applet;jpi-version=1.5.0_12
    jpi_download_page=http://java.sun.com/javase/downloads/index_jdk5.jsp
    baseHTML=basejpi.htm
    baseHTMLjinitiator=basejpi.htm
    baseHTMLjpi=basejpi.htm
    baseHTMLie=basejpi.htm
    When i run the form I got the same error message "internet Explorer cannot display the Webpage "
    Again I called the link : http://Computer_name:8889/forms/frmservlet?config=jpi
    then I got a message asking to allow loading and installing JRE 1.5.0_12 , and I allowed downloading and installation
    After all of this, the form doesn't run and I get the same message "Internet Explorer cannot display the Webpage "
    Is this a forms related problem or an Internet Explorer problem
    Please help
    Mostafa Abolaynain
    Edited by: Mostafa Abolaynain on Jun 5, 2009 12:06 AM

    jemar98 wrote:
    We have a custom application built alongside Oracle Ebusiness Suite 12.
    Launch a form from the Menu Navigator
    Click in any field in the form
    Focus does not change to the field that was clicked
    Focus can be retained by pressing any keyIs this issue with all custom forms or specific ones?
    Did you use the TEMPLATE.fmb file when building your custom forms?
    Can you find any errors in the JRE Console Window?
    Please obtain the FRD log file and see if you can capture more details about the error -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Cannot type in a text box or text callout box

    I'm using Windows 7, IE 9.0.8112.16421, and Acrobat version 10.1.6. I am working in a priorietary platform for reviewing material and I can use all of the commenting tools and can create a text box and a text callout box, but I cannot type in them. My text box and text callout box work just fine with every other program that I use on my system. But this requires using Acrobat and its tools within their platform and I cannot type in those two boxes in that situation. Their first suggestion was it was an Acrobat problem. We have repaired and reinstalled several times to no avail. They then said to be sure Acrobat Reader was not installed (and it wasn't). I've cleared history. Their online reviewing system requires a specific Java script in a specific place -- we've installed, deleted, reinstalled, etc. and it still doesn't work.
    I've used this platform on another computer and it works fine. I got a new computer in February with a new CS, and the problem is occurring on only this new system. And only when I am using Acrobat in their platform.
    Would anyone have any suggestions what I might try? They said they had one report of a person having the same problem, but they had Reader installed.
    Thanks!

    I don't know how to save a sample file to the forum.  But I know it's actualy being created because I can close and reopen the document and the text box is still there and you can still select the text in the text box, view it and see it.  But as soon as you click outside the text box, the text in the text box disappears again until you click back inside the text box.
    This problem has been discussed ad nauseum with no solution ever having been given.
    http://blogs.adobe.com/dmcmahon/2011/09/17/acrobatreader-x-how-to-enab le-the-typewriter-tool/
    By Judy - 5:10 PM on May 24, 2012   Reply
    I am on Adobe X Pro and whenever I add text using the text edit tool the text disappears when I add text to another place in the document. It is also creating comments for every place I add text. How do I get the text to remain visible in the document and not create a comment?
    http://answers.acrobatusers.com/text-box-disappears-q8542.aspx
    "I have a map pdf that I printed from Google Earth. I want to use text boxes to put labels on it. I can place the text boxes and get the font and colors all set up OK, but then when I click the cursor in a new place to start a new text box, the first one vanishes and won't come back unless I mouse over it. I've wasted hours trying to solve this one! I'm using Acrobat Pro X and Windows 7. It also happens with Acrobat Pro 9 and XP."
    http://forums.adobe.com/message/4550185
    http://forums.adobe.com/message/4477271
    Usually, responders claim that one is using Mac Preview or reader or some other program.  THAT IS NOT THE PROBLEM.  THE DOCUMENTS ARE BEING CREATED AND/OR EDITED IN ADOBE ACROBAT X AND NO OTHER PROGRAM.

  • After converting to word cannot type in document?

    cannot type in exported documents, word, scaned pdf?
    ms office 2011 for mac , with latest updates

    Hi,
    It seems that your Word file is an image rather than selectable text.
    If your PDF file contains scanned images please turn "ON" OCR to recognize those images to selectable text when you export the PDF file to Word.
    Please let me know if you still have the same issue.
    Note: To turn ON OCR:  Check ON for "Recognize scanned text in" in Export Options dialog of  web ui(https://createpdf.acrobat.com/signin.htmlor hhtps://exportpdf.acrobat.com/signin.html) or "Recognize text in English" in Reader X or Reader XI
    Thank you.
    Hisami

  • I am not proficient using pages. I opened and saved a document but for some reason there is no cursor so I cannot type in the document. How can i revert to a blank page?

    I opened a document in pages but cannot type anything in the document

    I assume that you you tried tapping and holding down on the document and the keyboard would not pop up and the insertion point did not appear.
    If you want to start with a clean slate, tap the Documents button in the upper left corner. When in thumbnail view you can tap the edit button in the upper right - find that blank document that you just closed - tap on it and then tap the trash can in the upper left to delete it.
    To start with a new document - tap the + button in the upper left corner and tap Create New Document.

  • InDesign CS3 & OSX Leopard  cannot type into palettes

    In InDesign CS3, I cannot type into palette boxes (e.g. to choose a typeface, find & change, the tranform palette etc etc).
    It allows me to type so far, then seems to 'refresh' itself, wiping what I have typed and reverting to what was there before.
    We have two iMacs (2.66GHZ Intel Core2Duo, 2GB RAM) here having the same problem!
    Has anyone else experienced this, or know of a solution/workaround? It's driving us nuts!
    Cheers

    Have a look at these:
    Kevin Cecil, "ID CS3 Control Palette Oddity" #, 30 Aug 2007 9:10 am
    http://www.adobeforums.com/webx/.59b4da44/2
    If you disable the auto activation plugin if you are using Suitcase X1 you will most likely see the problem disappear. I would use a program call FontNuke as well to purge corrupt font cache files. Use startup sets or project sets... stinks but gets rid of the stalling/crashing.

  • Cannot type in Mail

    It appears that I can type all the letters I want into the message area, as long as I do not hit the space bar. Once I hit the space bar, I cannot type and hear a beep. I also cannot send email.
    What should i do?
    Glenn

    This could be a Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services. The notes at the bottom of the article also provide information about the side effects of deleting each of the files involved.
    Resetting Launch Services
    The following article also describes the side effects of cache cleaning:
    Side effects of System cache cleaning
    The following article provides links to some utilities that can be used for troubleshooting and cache cleaning:
    Resolving Disk, Permission, and Cache Corruption
    It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner.
    In addition to the utilities mentioned above, you may also consider OnyX, which is free. If you want to try OnyX, after installing it, do this (be sure to read the articles about the side effects of cache cleaning first):
    1. Quit all applications.
    2. Launch OnyX and enter your administrator password.
    3. Click Maintenance. In the Reset section, check LaunchServices database.
    4. You may uncheck any other pre-checked options if you've already done them using other utilities.
    5. Click the Execute button.
    6. Restart.
    If that doesn't solve the problem, you may try again checking the Links between documents and applications option in step 3 instead.
    And yet another free cache cleaning utility is Cache Out X.
    Please, let me know whether you were able to solve the problem, what worked for you and what didn't.

Maybe you are looking for