Cannot uninstall Essbase Client in EPM

Hi all,
My own laptop is with win7 64bit system, and I try to install the SmartView and Essbase Client (Add-in) today, but unfortunately I installed the 32bit client by mistake (SmartView seems not this problem), so the Add-in cannot take effect in my Excel. And then I try to uninstall it and re-install the 64bit client, but, the first time, there is an error "JRE not found", sth like that, so I search the solution in the internet, the proposed solution is to copy the JRE folder from anotehr environment, so I found one in Version 1.5 to solve this problem. And then the second problem occured, the initializing process run endlessly and cannot see the next step after I select the products to uninstall, I don't know how to solve it, seems there're some similar cases in the internet but no replies I can find. Who can help give some solution? Thanks very much.
Another problem is, the Smartview menu appeared in my office, but I can't manage the data source management because I can't see anything in the panel, can also anyone give some help?
Thanks

Are you only requiring the excel addin, if so you don't need to install the client you can install the standalone excel addin, it is available from :- http://download.oracle.com/otn/hyperion/1112/Essbase-ExcelAddin-11120.zip
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Cannot Uninstall SCCM Client

I've seen this come up on older posts but it never gets a far as a solution that work for me. so here goes....
I have several machines which are only showing two actions and not acknowledging that packages are being advertised to them and the repair within the client is not correcting the issue or is unavaible(greyed out).
I'm trying to uninstall the client, so i can push a fresh install, using 'ccmsetup /uninstall' which in normal situations works for me but on these machines that are only showing two actions the client isnt uninstalling infact the uninstall doesnt seem to
do anything...
the ccmsetup.log isn't showing that i've done anything at all... in fact there are no entries for over a week which is when the system was originally imaged using SCCM.
I have also tried the 'client.msi /uninstall' but it is throwing an error... 'This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor............................'
Thoughts?

I've seen this come up on older posts but it never gets a far as a solution that work for me. so here goes....
I have several machines which are only showing two actions and not acknowledging that packages are being advertised to them and the repair within the client is not correcting the issue or is unavaible(greyed out).
I'm trying to uninstall the client, so i can push a fresh install, using 'ccmsetup /uninstall' which in normal situations works for me but on these machines that are only showing two actions the client isnt uninstalling infact the uninstall doesnt seem to
do anything...
the ccmsetup.log isn't showing that i've done anything at all... in fact there are no entries for over a week which is when the system was originally imaged using SCCM.
I have also tried the 'client.msi /uninstall' but it is throwing an error... 'This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor............................'
Thoughts?
Not read below maybe it has already been answered, this sounded a lot like using an older version of CCMSETUP to uninstall with ... I've had this in the past where CCMSETUP from 2.50 (SMS2003) was being used to uninstall the 4.00 (ConfigMgr) Client. Maybe
clean your CCMSETUP out and replace with the copy from the Site server ...
You could go all out and nuke it with CCMCLEAN /ALL, although it is unsupported it does work (SMS2003 Toolkit tool) and is used daily by us ConfigMgr admins :-) (Maybe not daily for me, but for some maybe ... !)

Essbase Client 32 bit on the Solaris SPARC 64 bit Cognos server - Need help

Hello All,
I have a SunSolaris SPARC 64 bit OS on which i have the 32 bit Cognos 8.4.1 installed.
I now wanted to install a 32 bit Essbase client on this server.
can anyone please let me know if there exists a 32 bit essbae client which can be installed on the SunSolaris SPARC 64 bit OS ?
Thanks you in advance.
MS

I will asume the latest version of the essbase client
"EPM System Installer installs both 32-bit and 64-bit Essbase Client on a machine with a 64-bit operating system."
Once it is installed you may need to update the environment variables to point to the 32bit client.
Cheers
John
http://john-goodwin.blogspot.com/

Can't uninstall Essbase Administration Services.........

Hi,
I want to reinstall all the hyperion essbase components in my pc(server 2003 on VMware Server 2.0.1). I uninstalled all the components like Essbase server, Essbase client and so on .. But I cant uninstall the essbase aministration services as it wont allow me to do so .. It is saying that
" can't uninstall in graphical mode. Try running with -console or -silent flag."
what is that error and how to get rid of this. can anyone suggest me.
Thanks.
Sr-Oracle.

Hi,
What applications do you see when you expand the essbase server and then applications ?
Like Seb said the option to install Sample application is usually available when you configure essbase.
You can also download the sample application from here
Cheers
John
http://john-goodwin.blogspot.com/

Uninstall Oracle client 11gR2

We need to install oracle client on a windows 2008 64 bits server.
Because for some of our miscrosoft integration service SSIS packages we have to run 32 bits.
SO I installed Oracle client 11g R2 32 bits for windows on the server.
I found some components are not installed, so I need to uninstall the client and reinstall it.
But by using universal installer, when clicking deinstall it says to run command ... to unintall it. Why...
Then in the directory of deinstall, I double click the deinstall.bat, it runs quickly and I didn't see oracle client is uninstalled.
Then following the instruction on the http://heliosguneserol.wordpress.com/2010/10/27/how-to-remove-oracle-11gr2-on-windows-7, it is windows 7, but I think it is the same.
I download the utility, and run the command, when I run this:
D:\win32_11gR2_deinstall\deinstall>set ORACLE_HOME=D:\Oracle11g\product\11.2.0\client_1
D:\win32_11gR2_deinstall\deinstall>deinstall -home D:\Oracle11g\product\11.2.0\client_1
The system cannot find the path specified.
But the path is there in windows direcotry,
what I am doing wrong?
How come 11g client is so hard to uninstall, but 10 g is so easy?
More information may help to trouble shoot:
Prior I download the the standalone version of deinstall , I tried the deinstall tool with the origianal oracle installation.
it gives error when I run the destinall,
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>d:
D:\>cd Oracle11g\product\11.2.0\client_1\deinstall
D:\Oracle11g\product\11.2.0\client_1\deinstall>
D:\Oracle11g\product\11.2.0\client_1\deinstall>deinstall.bat
Checking for required files and bootstrapping ...
Please wait ...
ERROR: Cannot find the file jlib\emca.jar in the ORACLE_HOME D:\Oracle11g\produc
t\11.2.0\client_1. You must download the standalone version of the deinstall to
ol from OTN to deconfigure/deinstall this Oracle Home.
cannot remove directory for C:\Users\xicao\AppData\Local\Temp\OraDeinstall2012-0
3-13_15-19-35: Permission denied at D:\Oracle11g\product\11.2.0\client_1\deinsta
ll\bootstrap.pl line 179
1 file(s) copied.
1 file(s) copied.
The system cannot find the path specified.
1 dir(s) moved.
D:\Oracle11g\product\11.2.0\client_1\deinstall>
Thanks
Edited by: 875563 on Mar 13, 2012 3:24 PM

Hello,
I found some components are not installed, so I need to uninstall the client and reinstall it.I'd like to know why it was not possible to make a custom installation with OUI and, then select the components you need.
Normally, you can run OUI every time you want so as to add all the necessary components over an existing installation.
For instance you can make a 1st installation with the "runtime" option, then in a 2nd installation add "Oracle ODBC Driver" component.
Else you'll find here the documentation about the deinstall tool:
http://docs.oracle.com/cd/E11882_01/install.112/e24187/deinstall.htm#BABHIGFE
Hope this help.
Best regards,
Jean-Valentin

Cannot uninstall runbook server

I have an Orchestrator environment that has a dud of a runbook server. I cannot deploy integration packs to it which means i cant run runbooks from it. I also cannot uninstall the runbook server. Well, if I am on the server i can uninstall it from ARP, but
I should be able to do it from the Deployment Manager. I get an error saying "Failed to uninstall...". I did There is an obvious communication issue between my management server and runbook server. I can ping and I've played with the firewall; I
turned it off and tried uninstalling and deploying IPs. I think its more of a trust issue which brings me to my one and only event to go on:
Source: Security Kerberos. Event ID: 4
"The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server
<<service account>>. The target name used was HOST/<<server>com. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered
on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target service is using a different password for
the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to use the current password. If the server name is not fully qualified,
and the target domain (domain.COM) is different from the client domain (domain.COM), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server."
In the first line the service account is in place where the error indicates the server should be....so thats strange. Why would it be looking for a server name but accidentally have the service account?
Also, I did uninstall Orchestrator from ARP on the runbook server, but it is still in the deployment manager and runbooks will still try to run from it unless I override in the runbook properties. So I can do that, but I'm not sure how to clean up afterwards
and get it all out of the management server properties. Which means i cant re-install it.
I tried
this and it didn't work.
Ideas?
Thanks.
- Slow is smooth and smooth is fast.

Hi,
Ok,then I would un-install from ARP (Add/Remove Programs in Control Panel).
If you tried removing the Runbook Server with the SQl Statement mentioned in http://blogs.technet.com/b/orchestrator/archive/2012/06/04/removing-inaccessible-computers-from-deployment-manager.aspx
and you don not have un-installed or stoppped the Runbook Server it will register itself again ...
Additionally DELETE FROM OBJECTS where Name = 'OLD-SERVER' is needed acoording to the blog comments.
The Runbook Servers take the Runbooks to start them. Therefor you don't need to specify this in the Runbook properties if a Server is off-line.
Good Luck!
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

How to launch Essbase Studio Console - EPM 11.1.2

Hi All,
I have installed EPM 11.1.2 sucessfully and I would like to start the Essbase Studio Console but Essbase Studio Console shortcut is missing.
Start > All Programs > Oracle EPM System > Essbase > Essbase Studio > Essbase Studio Console.
Not sure how to start the eStudio? I can see other shortcuts "Start Server", "Stop Server", "Start Commandline Client"
Regards
B

Hi John,
I have downloaded the two parts "Oracle Essbase Release 11.1.2.0.0 Part 1 of 2" and "Oracle Essbase Release 11.1.2.0.0 Part 2 of 2" and completed the installation, haven't downloaded the client software.
You mean I should have also downloaded Oracle Essbase Clients Release 11.1.2.0.0 for Microsoft Windows(V20792-01) and installed then? My installation is completed already, can I download now and re-do it again? will that re-install Essbase & Essbase Studio again?
Appreciate your comments.
Thanks
B

Client Security Services - Cannot Register Into Client Security

Hi,
I got a problem for login on Client Security. It asks "enter Windows password" and after enter it the answer is " the user cannot register into Client Security".
Configuration: Thinkpad Z61M, Vista professionel 32 bits, CSS 8.0.
I reset the security in BIOS,
clear the CSS and finger print,
install CSS 8.2 and finger print
I got the same answer from CSS after re-enter Windows password and Composed Password.
Could you help me.
Moderator note; subject edited

Hi,
to day I come back on laptop, I follow your action plan.
I uninstall CSS
As the HKLM\Software\lenovo was not clear with CSS, I delete this entry
AS %programfile%\Lenovo was not clear with CSS, I delete the CSS directory
I reset also the security chips in Bios
I install CSS again
In fact no change:
I got after boot a windows asking my windows password
After I got a window asking to wait during registration in CSS
And finally a window saying the user can not be registered in CSS
It could be a Security chips failure but no hard error seems to raise and I have no test to check it.
Thanks for your help, I think that I stop to use this software.

Extension Manager CS6 hangs on "Loading Extensions" and I cannot uninstall it.

Hello,
I've been having trouble with extension manager cs6 for about two days now, trying to apply patches to it to make it run more smoothly and stop hanging on "Loading Extensions". I have looked through these forums and they suggested that I remove all mxi files from a subfolder called "EM Store", but I cannot find a EM store under the proper location. I also cannot uninstall extension manager from my control panel, as it does not show up. I am just trying to get keyframe caddy for Adobe Flash, but I cannot get it without extension manager which is a giant pain. I've seen other people post both of their log files, but I think that just makes these forums impossible to find any real answers, as the majority of it is the log file. Please help asap, as I need this project that I am doing to be done fairly quickly.
Short story:
1. Manager hangs at "Loading Extensions"
2. Tried patching with updates, did not work
3. Tried finding the two subfolders, cannot find them at all in proper location
4. Cannot uninstall it from control panel
5. Need Help asap

You should delete EM Store and Database, then try again, you can find these folders under following path:
Current Machine's Extension Manager CS6 folder: C:\ProgramData\Adobe\Extension Manager CS6, under this path you should remove "EM Store", "Mxi Flag" and "Configuration" folder.
Current user's Extension Manager CS6 folder: C:\Users\<your_user_name>\AppData\Roaming\Adobe\Extension Manager CS6, under this path you should remove "EM Store", "Mxi Flag" and "Configuration" folder.
For the 'AppData' is a hidden folder, you could follow this guider (http://www.bleepingcomputer.com/tutorials/show-hidden-files-in-windows-7/) to unhidden it

Trying to get Essbase Client 11.1.2.3 for Linux 32bit, please need help

Hello,
I am running a RedHat Enterprise Linux 6.4 64-bit system and have an application that requires the 32-bit Essbase Client 11.1.2.X libraries in order to connect to an Essbase 11.1.2 server instance.
From reading through the forum posts for the past couple days I have come to an understanding that Oracle Essbase 11.1.2 no longer ships a Linux client as a separate assembly so you have to install the full Essbase server then extract the client files out of that to use.. So I am trying to get the correct bundle of files downloaded to even get the installer to launch properly so I can select a minimal installation including client components, but I can't get the correct zip files, I am getting close, but there is still a few missing, and the instructions I have found seem to refer to 11.1.1.X versions that have changed quite a bit in the 11.1.2.X version.
Can anyone please help me figure out what I am still missing to get the install running and how to extract the client libraries?
So far, I have downloaded:
2073792430 Apr 22 11:43 Apps-11123-linux32.zip
2440713397 Apr 22 11:46 ClientInstallers-11123.zip
554953827 Apr 22 11:47 Essbase-11123-linux32.zip
171726540 Jun 20 09:08 FinancialManagementAnalytics-11123-linux32.zip
1053291166 Apr 22 11:52 Foundation-11123-linux32-Part1.zip
1603812256 Apr 22 11:53 Foundation-11123-linux32-Part2.zip
939688909 Apr 22 11:53 Foundation-11123-linux32-Part4.zip
1597577101 Apr 22 11:55 Foundation-11123-Part3.zip
1801831469 Apr 22 12:01 OHS-11123-linux32.zip
366584941 Apr 22 12:04 RA-11123-linux32.zip
BUT I still have the following missing assemblies I can't account for:
EPMINS-01001: One or more preinstallation checks failed. Correct the errors before continuing with the installation.
Check assemblies: /home/ntruhan/Downloads/essbase/assemblies/biplus_product_reporting_client... Not exists
Failed!
EPMINS-01084: Assembly for linux32 platform is used
Failed!
EPMINS-01084: Assembly for linux32 platform is used
Failed! EPMINS-01084: Assembly for linux32 platform is used
Failed! EPMINS-01084: Assembly for linux32 platform is used
Failed! EPMINS-01084: Assembly for linux32 platform is used
/home/ntruhan/Downloads/essbase/assemblies/hfm_services... Not exists
/home/ntruhan/Downloads/essbase/assemblies/dbclient64... Not exists
Failed!
EPMINS-01084: Assembly for linux32 platform is used
Failed!
EPMINS-01084: Assembly for linux32 platform is used
/home/ntruhan/Downloads/essbase/assemblies/hsf_server... Not exists
/home/ntruhan/Downloads/essbase/assemblies/dbclient32... Not exists
/home/ntruhan/Downloads/essbase/assemblies/fdm... Not exists
Failed!
EPMINS-01084: Assembly for linux32 platform is used
Failed!
EPMINS-01084: Assembly for linux32 platform is used
/home/ntruhan/Downloads/essbase/assemblies/bpm_architect_services... Not exists
/home/ntruhan/Downloads/essbase/assemblies/hsf_webapp... Not exists
I am going through the list of entries, but the only references I have seen so far have been for Windows downloads and this is linux, and then there are the Assembly for linux32 messages, but I need that since I need the 32bit client libraries, right?
Can someone shed some light on this adventure in installing all of this since all of the install instructions I have been seeing are for an older version packaged differently?
Thank you in advance,
Nathan

Thank you for this. It set me on the right path. I wound up installing all of them as I was still getting those errors, but after I realized the REAL error was not the aseemblies not exsisting, but it was the "EPMINS-01084: Assembly for linux32 platform is used Failed!" error.
The Linux System i was TRYING to install on is RHEL 64bit, but I was trying to install a 32bit client as i needed a 32bit client. It just refused to install a 32bit client on a 64bit Linux machine.
I configured a CentOS 32bit Linux VMWare image and viola, the same driver files installed without an error.
Not sure why the 32bit client would not let me install on a 64bit system, but I finally got it now.
Now to tar the Essbase directories up and move them over to the RedHat machine where I need them.
Thank you for your help.

Running Firefox 4.0 on Windows 7 crashes when opening - no solutions to date work and I cannot uninstall it.

I've tried going through all the solutions I can find including trying unlock my profile (parent.lock), or create a new profile (profile manager crashes too), opening it in safe mode (it won't - still crashes), running it as administrator (also crashes) and I cannot uninstall it (that crashes too). The Crash Reporter/Manager also crashes and locks up so I cannot submit this issue. I'm at a loss.

Hit CTRL+SHIFT+ESC to bring up Windows Task Manager, go to the Processes tab and look for '''firefox.exe''' If you find it, right click it and choose Kill Process.
What I suggest next is to perform a clean installation as follows:
* Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0] and download a fresh installation file to the desktop. In this particular case, I'd recommend downloading the file with either IE8 or 9. Choose to save the file to your desktop when you see the prompt.
* Then go to Add/Remove Programs, scroll down to Mozilla Firefox and remove it, choosing to keep your bookmarks, customizations etc., (don't checkmark the box).
* Then reboot and delete the folder called Mozilla Firefox at this location: C:\Program Files\Mozilla Firefox
* Finally run the installation file you downloaded to the desktop earlier.
Your bookmarks, customizations etc., will be retained in a separate folder and will become available again once the reinstallation completes.
If you prefer to go back to the previous secure version which is 3.6.16, use this link instead: [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.16] Otherwise the procedure is the same.

Windows 7 crash after attempt to download Reader XI; cannot uninstall or reinstall Reader now

Hi
I am new on this forum.
I attempted to download Reader XI but my laptop (Windows 7) crashed at next reboot (blue screen before logon). Got Windows working again but now cannot uninstall Reader ("path cannot be found"). Attempted to install Reader X again but system said it was already installed.
Screen shots with error messages during uninstall attempt are below.
Any suggestions please?

Try this: Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs

Essbase client missing after creation of new windows user profile

I created a new windows user profile after an apparent corruption of my old one. However, when I open Excel, the Essbase client (add-in) is gone. Smartview is still there. The client doesn't show up after registering Essbase Add-In is executed. I can add the client by navigating to C:\Hyperion\products\Essbase\EssbaseClient\bin and selecting essxleqd.xla and essxcln.xll. The add-in then appears to be installed. However, when I try to connect to Essbase, the connection dialog box does not show up. I'm on version 11.1.1.3 and Excel 2007.
Is there a way to resolve this short of re-installing the client? Any advice would be appreciated.
Thanks in advance.
dave

I remember the Essbase add-in used to be a small executable of a few MB that was easy to install. It's my understanding that they went to the global installer where they include various product assemblies. The files needed to run the global installer for a simple add-in amount to close to about 4GB in size. Our VPN for remote users is very slow and takes forever to install. I see ther is still a small executable for the Smartview install. Is there a small executable for the Essbase add-in somewhere that I'm not aware of? I can reinstall if that's what it takes. I was hoping there might something a bit less time consuming.
Thanks John.
Edited by: DAS80220 on Jun 28, 2011 7:50 AM

I cannot uninstall itunes version 10.7.0.21 from my laptop use of that I also cannot install the new update.

I cannot uninstall iTunes version 10.7.0.21 from my laptop (windows 7), therefore I cannot install the new iTunes version....!
Every time I try to do it, a "message" from the windows installer pops up saying "The feature you are trying to use is on a network resource that is unavailable", I try to find the installation package "iTunes.msi" but I can never find it either...!
The funny part is, I can still use this version, but I would like the have the update, which can make my computer much faster than now!
Can someone help me out??

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

When I try to upload the lates version of iTunes, it tells me to enter an alternate path to a folder containing the installation package iTunes.msi. What does this mean as I can't seem to find any such folder and now I cannot uninstall Itunes either

when I try to upload the latest version of iTunes, it tells me to enter an alternate path to a folder containing the installation package iTunes.msi. What does this mean as I can't seem to find any such folder and now I cannot uninstall Itunes either

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Cannot uninstall Essbase Client in EPM

Similar Messages

Maybe you are looking for