Cannot uninstall software for HP7130xi

I replaced this printer with HPOfficejet Pro 8500A Plus several uears ago. However, I did not remove the software for the 7130. Starting this year, I began getting an error message about TWAIN???? associated with the 7130. I tried to uninstall it but it keeps telling me to turn off the device. I went to Device Manager and deleted it but the message remains. How do I turn off the device so I can uninstall the program?

Hi @julynsh,
Welcome to the HP Forums!
I noticed that you are unable to uninstall the software for your HP Officejet 7130xi. I am happy to help!
I would recommend this guide, Uninstalling the Printer Software. If you do not know the Operating System you are using, please visit this website. Whatsmyos.
Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.
Hope this helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

After uninstalling software for my TM506, I have "unidentified device" problems

After my TM506 stopped working, I finally got around to uninstalling the software for it from my Windows 7 PC. Now, my internal card reader doesn't work, and device manager says that I have a series of "unidentified device"s. For each, if I look at Properties/Details in device manager, I see that property "Hardware IDs" has value "rootseehcricdroot\seehcricd". This appears to have been caused by the uninstall. What can I do about this? Windows Update can't find a driver for any of these devices.
Thanks!

Thanks -- this led to a successful resolution. It was made more difficult by the fact that I could not roll back my drivers, since Win7 Update had installed SP1 in the interim, and I could not locate the drivers manually. My computer is an HP Pavillion, and on the HP web site I found an article suggesting that instead of just restarting my computer, I should power it down, unplug it, and then press the power key for five seconds before plugging in and restarting. When I did this (after removing the drivers that the article that you linked to suggested), my computer found and installed the correct drivers. All is well!
Thanks again.

Cannot install software for printer m521dn

Hello!
I have a problem, trying to install software for HP lj pro m521dn. Tried to use both Full Solution and basic print and scan drivers installer. OS is Win7 enterprise x64. Connection with printer is network. When installing, progress bar reaches 14% and reporting "Fatal error don't allows you to use this programm. Press OK to abort" (personal translate from russian, original message is "Фатальная ошибка не позволяет использовать продукт. Нажмите да чтобы выполнить отмену"). This trouble occures on multiple PC's, but not on all of them (average on 4 of 7). The only solution I found is full reinstallation of OS and installing software on fresh Windows without any drivers installed, except drivers for network card. Can you tell me something useful about this trouble?
P.S. Sorry for my bad English.

Hi @Ranlom
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
 
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
 
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
 
You may find the HP LaserJet Pro M521 Multifunction Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
 
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Envy 5530 cannot download software for MAC

I just bought this printer today. I got the wireless set up and have successfully printed from my ipad and iphone. I am unable to print through my macbook even after using the CD in the box and downloading the software from HP's site. After the install it asks me to "Add Printer". After it searches for the software it says that "the software for this printer is currently unavailable. Please contact the printer's manufacturer for the latest software." I've tried to print via USB and the same issue occurs. As I mentioned I downloaded the software right off HP's site.
If I am unable to resolve this, I will have to return it.
Please advise.

Hi @SVal
I can certainly help you with this "the software for this printer is currently unavailable..." message.
Let's perform a hard reset. To do so, leave the printer on and unplug the power cable for 1 minute. While it is unplugged, hold down the power button on the printer for 10-15 seconds to release any built up power, then after the minute has passed, plug the printer back in.
Before trying to add the printer again, you will need to shut down the computer for a moment. Please do not click restart, it is important to perform a 'shut down'. Once you turn the computer back on, you can then add the printer
Please let me know if this resolves the issue, thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Satellite Pro L300 - Cannot install software for USB 3.0 Expresscard

I am trying to install an AKE USB 3.0 expresscard to a Toshiba Pro L300 running Windows 7. The laptop recognises the expresscard but the software does not install correctly so the unit will not work.
Have tried the NEC & Fresco drivers supplied with the unit and also tried other drivers for AKE downloaded fron internet but still no joy.
Has anyone ever loaded in software for a USB3.0 expresscard successfully? Will the laptop take USB 3.0?
Any help would be much appreciated.

If the software doesnt install correctly try to contact card manufacturer and ask for help.

Cannot install software for 2nd iPod

I have iPod software already installed for my 1st iPod.
To set up the 2nd iPod I have tried the following:
- insert iPod sofware CD that came with the iPod. But when run, it asks if I want to remove the application. I've tried saying OK to remove, then installing the software, but it doesn't ask me to set up the 2nd iPod. I think it's just updating or replacing the software from the 1st iPod.
- plug the iPod in without installing the software. Nothing happens, it doesn't appear in iTunes and the 'do not disconnect' remains on the screen.
Help!?
Thanks, Emily

Hi and thanks for your response. I tried this, and when I attempt to install the updater it asks if I want to remove the software. I say yes, and of course it removes the iPod software! Then I do it again and it says it is installed and all seems to go well, but then I can't get the 2nd iPod to sync up. It says it can't read the iPod and fails to actually copy any files over to the iPod.
I have uninstalled v. 5 of iTunes and re-installed v.4 but same error continues to occur. Do you think I am experiencing an error related to 2 iPods, or perhaps it's something else altogether? The 1st iPod still works fine...

Cannot install software for HP envy 5530e

I've successfully installed software on 2 of mycomputers from a CD. I'm now trying to install software from hp.com/ePrint/ENVY5530 on a laptop with no CD Drive. The software seems to bedownloaded but I cannot open the file to start the installation process.

Hi,
Software and drivers for the printer can be downloaded from link below.
http://support.hp.com/us-en/product/HP-ENVY-5530-e-All-in-One-Printer-series/5304881/model/5304882/d...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Cannot install Software for E2500 or access router setup page

Please help! I first bought the e1200 version and when I tried to download it on my computer, it worked at first and installed correctly, but the cisco connect didn't properly install. I was able to log into the router online setup page ONE time. I tried to reset it and reinstall but it will not work.
So I thought ok let me go and purchase a better one (thinking it was the router version having issues). So I brought it back and purchased the E2500 and I am having the same trouble.
I have tried to reset it about 20 times and reinstall and it will not install at all. It still gives me internet, but I cannot log into the http://192.168.1.1/ page at all, it tells me internet cannot display...
Please help!

Hi there. Please check first if router is responding properly. Are you on Mac or Windows? On Windows pc, open command prompt (start>run>cmd for XP/ start>search>cmd for Vista and Windows 7) and type ping 192.168.1.1 and press enter. If you are getting 4 lines of replies from 192.168.1.1 bytes 32 something then router is okay. On command prompt again go down to the next line where it has the flashing cursor and type this time: start http://192.168.1.1. After you press enter, your browser comes up and normally will prompt you to log-in to area 192.168.1.1 and that is where you can use admin in both fields (username and password since you reset the router already). If you get page cannot be displayed still, disable proxies on the browser. Example if you are on IE, you click tools and then internet options and go to connections and click lan settings. On the small window that comes up, just make sure nothing is checked and then try on the address bar again http://192.168.1.1. If your computer still cannot access it, try a different browser or a different computer.

Cannot download software for deskjet 3050

from HP website, i can select the software to download but when I am asked to confirm my operating system, the HP time waiter appears and turns for ever without finding the software to download
This question was solved.
View Solution.

Hi,
Below are the drivers for the HP Deskjet 3054 (J610) printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-109394-3&cc=us&dlc=en&lc=en...
Be aware that those are intended for the Deskjet 3054 model as described and not for the 3054A which is a different model...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Cannot uninstall Kaspersky for 2014 so I can install my new Kaspersky for 2015

HP G62-435DX Notebook PC
Model: XZ259UA
I am attempting to UNINSTALL Kaspersky from 2014 so that I can INSTALL my new Kaspersky for 2015. Something is blocking my attempt. It starts the process and simply stops right before it's finished. Something is blocking it, can you help or give me any suggestions?
Thank You,
Karen

I have spent many hours and 7 days on the phone with Kaspersky with no help. I get a different answer everytime I call and they all end up trying to sale me different contracts for protection. The last quote was $899.00 for coverage for life. I thought how stupid do you think I am? Long story short I have given up which is what they probably wanted me to do. All I can say is stay away from KASPERSKY, they are like a virus themselves. Sincerely, Karen
Dragon-Fur wrote:
Hi Karen,
Welcome to the HP Community Forum.
I think you might wish to visit the Kaspersky Site for help with this kind of problem.
I did find the following which might be helpful:
Service articles: Removal tool to uninstall Kaspersky Lab products
The article suggests:
Download Kavremover.
Boot your computer in Safe Mode.
Run Kavremover.
Restart your computer after the utility completes.
Complete details are included in the article (linked above).
Reference:
Kaspersky - Security for Home and Business
Click the Kudos Thumbs-Up to show you appreciate the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer provides a Fix or Workaround!

I HAVE A SAMSUNG LASER PRINTER AND CANNOT GET SOFTWARE FOR IT

I have a Samsung CLP 315w Laser printer it ran out of ink changed the toners and it has not worked since I have tried uninstalling it but when trying to configure again it says software unavailable any help welcomed

This is the Apple iPad Support forum. Samsung's support site is here:
http://www.samsung.com/uk/support/download/supportGlobalDownloadPrdDetail.do

I cannot update software for my Macbook Pro

when i try to update software, it shows update is available. i click update, and then shows 12 items available. i click continue, soon, shows message that needs to restart the computer. i click restart and computer turns and screen frozen

Update softwares one by one could figure out what is the problem.

I cannot uninstall CS6 for Mac.

I want to upgrade to CC but Uninstall Alias is not working and I've run the cc cleaner tool but the apps are still showing and working and no longer appear in the tool menu. Please help.

If you need to you can search your hard drive and remove everything pertaining to Adobe. I don't know why Adobe Cleaner Tool isn't doing that because it should.
Nevertheless, you don't have to removed every component of CS6 to install CC. The two versions can be on the computer at the same time. That's the way I run my system.

Cannot install sofware for HP Office jet 8625 Pro on my Dell Inspiron 15 with windows vista?

Cannot
install
software for HP Office jet 8625 Pro software on my Dell Inspiron Core 2 processor with Windows Vista?

Hi @akcarl
What happens when you try to install? Does it freeze, do you get an error message, or perhaps you simply can not find the appropriate software to download?
Please post back with some additional detail so I can better assist you. Thanks.
In the meantime, if the issue is nothing but finding the software, you may use the following link; OJ8620_198.exe
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I cannot load program for neat receipts for mac

I cannot load software for Neat Works for Mac. Can anyone help me?

http://www.macupdate.com/app/mac/33482/neatworks

Cannot uninstall software for HP7130xi

Similar Messages

Maybe you are looking for