Cannot unlock to make admin changes

Ever since installing Lion, my MBP has been very slow and I cannot make any admin changes. In any event where admin privileges are needed, I hit the padlock on the bottom left of the window. It asks for my password. I enter it and it accepts, but the padlock is still locked. . . My username is listed as "Admin" in the users list. I can't add another user because I cant unlock that privilege. I've verified and repaired disk permissions and verified disk with no errors. The installation of Lion was on a clean Hard drive, not an upgrade. Considering going back to SL at this point. Any help would be greatly appreciated!
Thanks!

Back up all data, then boot from your recovery partition (command-R at startup) and reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

Similar Messages

My password only works to log into the computer, but not to make admin changes, even though I am the admin account on the computer. This happened after I tried to change the computer's name. Is there any way to fix this?

Bought my laptop off my room mate and he had master reset it to default. This still left his name as the computer name and I wanted to change that. Tried to rename it under the advanced changes section, and now it isn't recognizing my password for anything more than logging in. I can't unlock the settings to make further changes (or change it back). I have had my room mate try all of his old passwords and usernames, to no avail. Is there a way to reset this? It's also not letting me wipe the drive and start fresh again because, alas, I don't have access without the password. Any advice would be very helpful. Thank you!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

MBP Will not wake properly from sleep-flash of screen and keyboard for a bit every few seconds. Under guest account, wakes up just fine. I also cannot unlock various padlocks to change settings in e.g. system prefs. security? Any help, I'm dyin!

Not waking up from sleep-flashes lighted keyboard and screen, and I cannot unlock the padlocks in the system to change settings, look at keychain, etc.

Still cannot unlock system prefs/users etc.   Also, many applications are returning errors like: "failed to obtain the necessary authorization" or " '' failed to obtain permission" so I've attached a portion of my log, showing when I attempt to unlock (or click on the padlock) in system preferences - User Accounts:
3/7/13 7:52:51.180 PM
SecurityAgent[3818]
Problem during create from (builtin:login)
3/7/13 7:52:51.181 PM
SecurityAgent[3818]
Problem during create from (builtin:login)
3/7/13 7:52:53.982 PM
SecurityAgent[3818]
Problem during create from (builtin:login)
3/7/13 7:52:53.982 PM
SecurityAgent[3818]
Problem during create from (builtin:login)
3/7/13 7:52:58.794 PM
WindowServer[3177]
CGXSetTrackingAreaEnabled : Invalid tracking area 0x1642350
3/7/13 7:52:58.796 PM
WindowServer[3177]
CGXSetTrackingAreaEnabled : Invalid tracking area 0x1642350
3/7/13 7:52:58.827 PM
WindowServer[3177]
CGXSetTrackingAreaEnabled : Invalid tracking area 0x1642350
3/7/13 7:53:01.340 PM
helpd[3305]
Could not find access page in directory /Applications/Nomina.app/Contents/Resources/NominaHelp
3/7/13 7:53:01.342 PM
helpd[3305]
Could not find access page in directory /Applications/Nomina.app/Contents/Resources/NominaHelp
3/7/13 7:53:11.354 PM
helpd[3305]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 1. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
3/7/13 7:53:11.355 PM
helpd[3305]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 1. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
3/7/13 7:53:37.799 PM
WindowServer[3177]
CGXSetTrackingAreaEnabled : Invalid tracking area 0x1318260
3/7/13 7:53:37.800 PM
WindowServer[3177]
CGXSetTrackingAreaEnabled : Invalid tracking area 0x1642350
3/7/13 7:53:37.802 PM
WindowServer[3177]
CGXSetTrackingAreaEnabled : Invalid tracking area 0x1642350
3/7/13 7:53:37.819 PM
WindowServer[3177]
CGXSetTrackingAreaEnabled : Invalid tracking area 0x1642350
3/7/13 7:57:24.304 PM
PopClip[5202]
[INFO] PopAppDelegate: PopClip Initializing.
3/7/13 7:57:24.439 PM
PopClip[5202]
NSWindow does not support nonactivating panel styleMask 0x80
3/7/13 7:57:24.441 PM
PopClip[5202]
[INFO] PopAppDelegate: PopClip will wait 0.500000 seconds to start.
3/7/13 7:57:31.632 PM
SecurityAgent[5231]
Problem during create from (builtin:login)
3/7/13 7:57:31.633 PM
SecurityAgent[5231]
Problem during create from (builtin:login)
3/7/13 7:57:32.665 PM
SecurityAgent[5231]
Problem during create from (builtin:login)
3/7/13 7:57:32.665 PM
SecurityAgent[5231]
Problem during create from (builtin:login)
Now here is some additional info from the logs that appears to my novice eyes to be presenting a problem:
<D:multistatus xmlns:D="DAV:" xmlns:caldav="urn:ietf:params:xml:ns:caldav" xmlns:cs="http://calendarserver.org/ns/" xmlns:ical="http://apple.com/ns/ical/">
<D:response xmlns:carddav="urn:ietf:params:xml:ns:carddav">
<D:href>/calendar/dav/</D:href>
<D:propstat>
   <D:status>HTTP/1.1 200 OK</D:status>
   <D:prop>
    <D:current-user-principal>
     <D:unauthenticated/>
    </D:current-user-principal>
   </D:prop>
</D:propstat>
</D:response>
</D:multistatus>]
3/7/13 7:50:47.525 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [<<<<<]
3/7/13 7:50:47.525 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=CoreDAVHTTPStatusErrorDomain Code=401 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 401.)" UserInfo=0x7fe2dff032f0 {AccountName=Google, CalDAVErrFromRefresh=YES, CoreDAVHTTPHeaders=<CFBasicHash 0x7fe2dff0f6d0 [0x7fff71512fd0]>{type = immutable dict, count = 10,
entries =>
          0 : Case Insensitive Key: X-Content-Type-Options = <CFString 0x7fe2dff0e960 [0x7fff71512fd0]>{contents = "nosniff"}
          1 : Case Insensitive Key: Content-Type = <CFString 0x7fe2dff0f100 [0x7fff71512fd0]>{contents = "application/vnd.google.gdata.error+xml; charset=UTF-8"}
          2 : Case Insensitive Key: Server = <CFString 0x7fe2dff0f510 [0x7fff71512fd0]>{contents = "GSE"}
          3 : Case Insensitive Key: Transfer-Encoding = <CFString 0x7fff719196f8 [0x7fff71512fd0]>{contents = "Identity"}
          6 : Case Insensitive Key: Date = <CFString 0x7fe2dff0f150 [0x7fff71512fd0]>{contents = "Fri, 08 Mar 2013 02:50:46 GMT"}
          7 : Case Insensitive Key: X-Frame-Options = <CFString 0x7fe2dff0f480 [0x7fff71512fd0]>{contents = "SAMEORIGIN"}
          8 : Case Insensitive Key: X-XSS-Protection = <CFString 0x7fe2dff0f4f0 [0x7fff71512fd0]>{contents = "1; mode=block"}
          9 : Case Insensitive Key: Www-Authenticate = <CFString 0x7fe2dff0efd0 [0x7fff71512fd0]>{contents = "basic realm="Google APIs""}
          11 : Case Insensitive Key: Cache-Control = <CFString 0x7fe2dff0f1b0 [0x7fff71512fd0]>{contents = "private, max-age=0"}
          12 : Case Insensitive Key: Expires = <CFString 0x7fe2dff0f180 [0x7fff71512fd0]>{contents = "Fri, 08 Mar 2013 02:50:46 GMT"}
3/7/13 7:50:47.566 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [<<<<<]
3/7/13 7:50:47.567 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [HTTP/1.1 200 (OK)]
3/7/13 7:50:47.567 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Age: 0]
3/7/13 7:50:47.568 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Allow: MKCOL, REPORT, MOVE, COPY, HEAD, POST, GET, DELETE, ACL, MKCALENDAR, PROPFIND, LOCK, OPTIONS, PUT, PROPPATCH, UNLOCK]
3/7/13 7:50:47.568 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Cache-Control: private]
3/7/13 7:50:47.569 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Connection: keep-alive]
3/7/13 7:50:47.569 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Content-Type: text/plain; charset=utf-8]
3/7/13 7:50:47.569 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Date: Fri, 08 Mar 2013 02:50:47 GMT]
3/7/13 7:50:47.570 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [DAV: 1, 2, 3, access-control, calendar-access, version-control, addressbook, extended-mkcol, calendar-proxy, calendarserver-principal-property-search]
3/7/13 7:50:47.570 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Server: YTS/1.19.11]
3/7/13 7:50:47.570 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Transfer-Encoding: Identity]
3/7/13 7:50:47.571 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Vary: Accept-Encoding]
3/7/13 7:50:47.571 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Via: HTTP/1.1 calgate007.cal.sp2.yahoo.com (YahooTrafficServer/1.19.11 [c sSf ])]
3/7/13 7:50:47.571 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] []
3/7/13 7:50:47.576 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.queue] [CalDAVAccountRefreshQueueableOperation :: calendar home path is empty, not refreshing calendars]
3/7/13 7:50:47.582 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [>>>>>]
3/7/13 7:50:47.582 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [PROPFIND https://caldav.calendar.yahoo.com/principals/users/saab9.5turbo/]
3/7/13 7:50:47.582 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Brief: t]
3/7/13 7:50:47.582 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Content-Length: 130]
3/7/13 7:50:47.583 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Content-Type: text/xml]
3/7/13 7:50:47.583 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Depth: 0]
3/7/13 7:50:47.583 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [User-Agent: Mac OS X/10.8.2 (12C60) CalendarAgent/55]
3/7/13 7:50:47.583 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] []
3/7/13 7:50:47.583 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [<?xml version="1.0" encoding="UTF-8"?>
<A:propfind xmlns:A="DAV:">
<A:prop>
    <A:group-membership/>
</A:prop>
</A:propfind>]
3/7/13 7:50:47.584 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] []
3/7/13 7:50:47.584 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [>>>>>]
3/7/13 7:50:48.101 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [<<<<<]
3/7/13 7:50:48.101 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [HTTP/1.1 401 (Unauthorized)]
3/7/13 7:50:48.102 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Cache-Control: no-store]
3/7/13 7:50:48.102 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Connection: close]
3/7/13 7:50:48.102 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Content-Language: en]
3/7/13 7:50:48.102 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Content-Length: 1]
3/7/13 7:50:48.103 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Content-Type: text/html]
3/7/13 7:50:48.103 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Date: Fri, 08 Mar 2013 02:50:48 GMT]
3/7/13 7:50:48.103 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Server: YTS/1.19.11]
3/7/13 7:50:48.104 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Via: HTTP/1.1 calgate009.cal.sp2.yahoo.com (YahooTrafficServer/1.19.11 [c s f ])]
3/7/13 7:50:48.104 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [Www-Authenticate: Basic realm="Zimbra"]
3/7/13 7:50:48.104 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] []
3/7/13 7:50:48.104 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] []
3/7/13 7:50:48.104 PM          CalendarAgent[3308]          [com.apple.calendar.store.log.caldav.http] [<<<<<]
3/7/13 7:50:49.202 PM          MacPilot[4054]          A regular control size progress indicator <RBXProgressWheel: 0x212bf20> with the frame size for small control size detected. Please use -setControlSize: to explicitly specify NSSmallControlSize
3/7/13 7:51:00.584 PM          SecurityAgent[3818]          Problem during create from (builtin:login)
3/7/13 7:51:00.584 PM          SecurityAgent[3818]          Problem during create from (builtin:login)
And some more:
Mar 7 20:51:07 Matthews-MacBook-Pro.local WindowServer[3177]: CGXGetConnectionProperty: Invalid connection 57091
Mar 7 20:51:37 --- last message repeated 8 times ---
Mar 7 20:53:14 Matthews-MacBook-Pro.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.hdd.smart' by client '/Library/Application Support/iStat Menus 4/iStatMenusDaemon' [104] for authorization created by '/Library/Application Support/iStat Menus 4/iStatMenusDaemon' [104] (B,0)
Mar 7 20:53:14 Matthews-MacBook-Pro.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.hdd.smart' by client '/Library/Application Support/iStat Menus 4/iStatMenusDaemon' [104] for authorization created by '/Library/Application Support/iStat Menus 4/iStatMenusDaemon' [104] (B,0)
Mar 7 20:53:44 --- last message repeated 2 times ---
Mar 7 20:58:25 Matthews-MacBook-Pro.local CVMServer[114]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
Mar 7 20:58:25 Matthews-MacBook-Pro.local CVMServer[114]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
Mar 7 20:59:04 Matthews-MacBook-Pro.local Finder[3247]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 1. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
Mar 7 21:03:05 Matthews-MacBook-Pro.local Finder[3247]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 1. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
I can't reinstall ML, nor can I create another user (unless I use Terminal, and I'm a novice at best with Terminal).
I could really use some help here as it's been nearly 24 and I am going CRAZY!   Thanks in advance for your help.

Please help!!! I locked my pdf for editing then signed it now cannot unlock to make changes

Using adobe acrobat professional 6.0, I made comments on a pdf then went to the security icon to lock the pdf. I accidently forgot to choose to allow commenting. I then signed the pdf.
Now when i try to edit the pdf. it tells me i must clear all signature fields, but when i right click on the signature field there is no choice to clear or delete. i think its because in the changes allowed box i left it as none. does anyone know how i can get the option to clear my signature field and re enter my password so that i can edit this pdf.

Hi,
If you have access to the private key (the digital ID) that was used to create the signature then Acrobat should let you clear it. The only exception is, if the signature field properties were set to lock on signing (this is different then the No Changes Allowed setting on the sign dialog).
Steve

My Bridge CC opens in a locked mode - I cannot make any changes (dump cache) - it says "other instances of Adobe Application Manager are running, which must be closed." I have to force quit Bridge to get out of it. I tried to uninstall Bridge and re-insta

My Bridge CC opens in a locked mode - I cannot make any changes (dump cache) - it says "other instances of Adobe Application Manager are running, which must be closed." I have to force quit Bridge to get out of it. I tried to uninstall Bridge and re-install it but it did the same thing. Any ideas where to go next?
The fact that I uninstalled Bridge and reloaded it has me concerned as to what to do next.?

You need to force quit all other (real or fake) instances of the Application Manager. Instructions differ between Mac or Win.
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

This database was connected to a Microsoft Access Services site that is not compatible with this version of Microsof Access. You cannot make design changes or modify data in database.

Hello All,
I am getting this error while I am connecting my access database website for the change
"This database was connected to a Microsoft Access Services site that is not compatible with this version of Microsof Access. You cannot make design changes or modify data in database."
I am using SharePoint 2010 and Microsoft Office 2010.
I have created one Contact Database Site and now I am trying to modify the layout of the form in Access. and I am getting the error that I have mentioned.
Please provide help on it.
Thanks in Advance....

Hello All,
I got the answer, we have to enable the port 80 or where the access service is deployed and we have to change Trust setting and also, enable the macro from Access.
Hope this will help to other....

Before using the current Mac version Yosemite, I did not have an Administrator password. It seems now that one is required to unlock and make changes in settings. I have tried all my usual passwords but to no avail. any ideas???

Before using the current Mac version Yosemite, I did not have an Administrator password. It seems now that one is required to unlock and make changes in settings. I have tried all my usual passwords but to no avail. any ideas???

Boot into Recovery. OS X: About OS X Recovery - Apple Support
Select Terminal from the Utilities menu.
At the prompt type,
resetpassword
Hit return.
Follow the prompts in the utility to select hard drive, then user.
Reset the password.
Exit the utility and restart.
You will need to log in with your new password, but your keychain will not be reset.
I’m not sure what access you’ll have to the old keychain since it didn’t have a password. You may be able to get into the keychain and reset the password to match your login password.

The credit card info on the account has changed but for some reason there is no option for me to make the changes. In addition, cloud has stopped working and all other programs that need to be updated cannot be.

the credit card info on the account has changed but for some reason there is no option for me to make the changes. In addition, cloud has stopped working and all other programs that need to be updated cannot be??

Make sure that EVERY DETAIL is the same in every place you enter your information
-right down to how you spell and punctuate the parts of your name and address
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-email address https://forums.adobe.com/thread/1446019
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html

My Ipod Touch Was dropped and screen is broken. How can I get It Fixed? I cannot Unlock the Ipod Touch, all I can do is play Music and Change Songs.

I Dropped My Ipod Gen 4 on a Granite Floor and it Spider webbed. Now all I can do is Play songs and change songs from the lock screen. I cannot unlock the Ipod or do anything else. Is there any way for me to get it fixed Cheap???

Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
You can do it at an Apple store by making an appointment:
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

In iTunes under my device, under the apps tab, Why are all the options shaded out? I cannot make any changes, select any apps or do anything with the apps. I was able to load a few apps and sync but cannot sync anymore to my phone.

In iTunes under my device, under the apps tab, Why are all the options shaded out? I cannot make any changes, select any apps or do anything with the apps. I was able to load a few apps and sync but cannot sync anymore to my phone.

Hi,
( I search for iChat questions when I have finished in the iChat Forum)
So the menu bar reads iChat, File, Edit, View, Buddies, Video, Window and Help
There is no Buddy List open.
There is no other window for iChat open.
In the iChat Menu you only have access to Status.
Is an item ticked in the list ?
Is this a green (Available item) or Red ( an Away one) ?
Can you access the Accounts option ? (Sitll in the iChat Menu)
Is anything in here ticked ?
In the Window menu any Logged in account should appear in the list (Between the Next Chat and File Transfer items)
It would be useful to know which version of iChat this is.
If no account is ticked (iChat Menu > Accounts) or not showing in the Window Menu, plus you cannot determine the Status and you cannot access the Preferences then you need to access your Home Folder/Library/Preferences
As the Library in the Home Holder is Invisible in Lion you will need the Finder's Go Menu > Go to Folder option (you can use it in earlier OS versions if you want)
Type in:-
~/Library/Preferences
Find the file called com.apple.ichat.plist
Drag it to the Trash and Restart iChat.
This will lose all the settings in iChat that you have changed from Defaults but there is no way around this.
9:23 PM Saturday; August 27, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Cannot make several changes at once

Hi,
I have Contribute installed onto a computer and i am able to connect to the server via FTP.
When I edit 1 thing on the website and go to draft and publish it will upload the change i have made and it is visible on the website, but when i make several changes at once then go to draft and publish then it says it cannot access the FTP server.
Does anyone know how to fix this? or hae had similar issues?
cheers,
Phil.

did not work. it's doing the same thing. the password does not contain any invalid keys
live chat does not support the BEFW11S4 version2. they told me to call 800-326-7114 for help
and the wireless functionality is working. i can connect to my network with my laptop. I just can't change anything on the configuration page (192.168.1.1) because it never recognizes my password except to login to the page.
Message Edited by lefty on 09-08-2007 11:54 AM

Why iPod Touch cannot be synced because I do not have the privilege to make the changes?, Why iPod Touch cannot be synced because I do not have the privilege to make the changes?

When trying to sync m iPod Touch with my iTunes it tells me that the iPod Touch cannot be synced because I do not have the privilege to make the changes.

Hello Lizzyr Lizaryd,
And welcome to Apple Discussions!
Try reformatting the iPod using *Disk Utility*. For instructions on how to do this, see this Apple Support document.
http://b-rockprogramming.blogspot.com/p/ipoditunes-tutorials-and.html
B-rock

Since upgrading to Mavericks I can't click and drag or unlock to make changes.

As the title says, I upgraded to Mavericks, and since then, I haven't been able to click and drag anything from my desktop / finder etc. I can however drag windows around. I've check in the accessabiltiies options for the drag locking and that is set how it should be, but still hasn't fixed anythi
I also read that people had similar problems and tried a few of the fixes like force it to sleep and wake up. That didn't work, I also was going to make a new user, however it appears I am unable to unlock the lock in the bottom left. It blinks but doesnt unlock to make changes
Anyone have any similar issues? I'd appreciate any help

I just got a new rMBP with Mavericks pre-installed (unfortunately) and this is my first day using it. I've had this same issue. The only thing that solved it was to restart finder by using an automator that showed (and hid) hidden files.
I actually clicked the automator so I could easily drill down to the plist files so I could try deleting my old ones, but as soon as my desktop (and finder windows) came back up, I was able to click and drag again! I assume it was because I restarted the process that runs finder.
This is obviously a bug in the OS somewhere, but at least this was a very quick fix to the issue for me. (Even if it's one I'll have to keep using as I have the problem resurface).

I have the IPhone, IPad and MacBook, IPad and IPhone share the same Apple ID and Icloud storage. Cannot make ID Change on MacBook as it says the ID is already taken. How can I make all three match?

I have the IPhone, IPad and MacBook, IPad and IPhone share the same Apple ID and Icloud storage. Cannot make ID Change on MacBook as it says the ID is already taken. How can I make all three match?

The problem is that all services are bundled with your Apple ID ([email protected]):
Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
and the iTunes Match services.
(I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
iCloud (Settings > iCloud) with her account (e.g. [email protected])
and
iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
In this case she gets access to your library and could use the same iTunes Match account.
(See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895)

Hi, Since updating to 10.7.2 I cannot make any changes to my web site. I just keep getting the same stupid message asking if I have an account even though I am already logged in. Any thoughts. Thanks

Hi, Since updating to 10.7.2 I cannot make any changes to my web site. I just keep getting the same stupid message asking if I have an account even though I am already logged in. Any thoughts. Thanks

Go and log out of your MobileMe account and then try logging back in again with a dummy username and password. This can help clear it and then just log back in again with your normal username and password.
Note though that iWeb does not require a password or username to use it - this is MobileMe.
Also, start thinking about MobileMe alternatives before you are forced to in June.

Cannot unlock to make admin changes

Similar Messages

Maybe you are looking for