Cannot unzip 10202_database_solx86.zip

Downloaded 10202_database_solx86.zip to Solaris 5.10 x86 server (32bit architecture).
Tried unzip 10202_database_solx86.zip
Archive: 10202_database_solx86.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of 10202_database_solx86.zip or
10202_database_solx86.zip.zip, and cannot find 10202_database_solx86.zip.ZIP, period.
Tried to unzip the same file on another server with the same results. System Admins think the file is corrupt or ??
Opened SR 6400327.993 but Oracle Support says I must resolve thru Forums.
H.Tuthill

Hi,
It seems that “oracle” don’t have access to the directory/subdirectory where you download /copied the dump.
Better follow the steps
As root
1.     Move the dump to /tmp
2.     Chmod 777 /tmp
3.     Chmod 777 <dump name>
As oracle
4.     Unzip <dump>
Hope this helps
Regards,
Satishbabu Gunukula
http://oracleracexpert.blogspot.com
[Click here to learn Voting Disk backup and recovery|http://oracleracexpert.blogspot.com/2009/08/voting-disk-backup-and-recovery.html]

Similar Messages

  • Cannot unzip 10g zip file

    Hi,
    I tried to download the 10g zip file for windows but when I try to unzip it I get the message that the zipfile is not a valid archive. I then tried to download the separate components, but with the same result.
    I'm using winzip 8.1
    Cheers,
    Magnus

    Hi,
    It seems like if the partition where the TEMP folder is located isn't big enough, the download fails. The downloaded file becomes the size of available space for TEMP.
    The strange thing is that the download says 576 Mb (or something), and there is no error, but the file becomes only 270 Mb (in my case).
    After allocating more room for TEMP the download worked fine.
    Cheers,
    Magnus

  • Cannot UNZIP jdev9i_902.zip

    Hi, strange:
    At home (W2000) I downloaded jdev9i_902.zip and could extract it to C:\. Perfectly, no problem!
    Now -at office- (NT4) I downloaded the same jdev9i_902.zip BUT when I try to unzip it
    -I use WinRAR3.0 for NT- the error occurs: "D:\jdev9i_902.zip: Either multipart or corrupt ZIP archive"
    I see a total of 2054 files in the 'defect' ZIP file.
    Please help....
    Thanks
    Stephan

    Please try unzipping the 9.0.3 release. If it still fails with WinRAR please use WinZIP or pkunzip.
    Mike
    Hi, strange:
    At home (W2000) I downloaded jdev9i_902.zip and could extract it to C:\. Perfectly, no problem!
    Now -at office- (NT4) I downloaded the same jdev9i_902.zip BUT when I try to unzip it
    -I use WinRAR3.0 for NT- the error occurs: "D:\jdev9i_902.zip: Either multipart or corrupt ZIP archive"
    I see a total of 2054 files in the 'defect' ZIP file.
    Please help....
    Thanks
    Stephan

  • Cannot use winzip to unzip the zip file zipped by java.util.zip

    Hi all,
    I use the followcode to create a zip file, and i downlaod it and try to use winzip to unzip this file but fail. The path is correct and i got the zip file. but it just cannot unzip.
    pls help
    thanks alot.
    Kin
              int count = 0;
              count = ContentDocuments.size();
              for (int i = 0; i < bb; i++)     {
                   System.out.println(filenames[i] + "");
              // Create a buffer for reading the files
              byte[] buf = new byte[10*1024*1024];
              try {      
                   String outFilename = MyDir + "zipfile/" + getContentID2()+".zip";
                   System.out.println("outFilename = " + outFilename);
                   ZipOutputStream out = new ZipOutputStream(new FileOutputStream(outFilename));
                   for (int i=0; i<filenames.length; i++) {           
                        FileInputStream in = new FileInputStream(filenames);
                        out.putNextEntry(new ZipEntry(filenames[i]));
                        int len;
                        while ((len = in.read(buf)) != -1) {               
                             out.write(buf, 0, len);
                        out.closeEntry();
                        in.close();
                   out.close();
              } catch (IOException e)     {
                   System.err.println("zipprocess " + e.getMessage());

    I've written a replacement zip file creator class. Not much tested but it seems to work, however I've yet to try it with the version of WINZIP that rejected my previous attempts. Oh, and the stored dates are garbage.
    * ZipOutputFile.java
    * Created on 25 March 2004, 13:08
    package zip;
    import java.io.IOException;
    import java.nio.ByteBuffer;
    * <p>Creates a ZIP archive in a file which WINZIP should be able to read.</p>
    * <p>Unfortunately zip archives generated by the standard Java class
    * {@link java.util.zip.ZipOutputStream}, while adhering to PKZIPs format specification,
    * don't appear to be readable by some versions of WinZip and similar utilities. This is
    * probably because they use
    * a format specified for writing to a non-seakable stream, where the length and CRC of
    * a file is writen to a special block following the data. Since the length of the binary
    * date is unknown this makes an archive quite complicated to read, and it looks like
    * WinZip hasn't bothered.</p>
    * <p>All data is Deflated. Close completes the archive, flush terminates the current entry.</p>
    * @see java.util.zip.ZipOutputStream
    * @author  Malcolm McMahon
    public class ZipOutputFile extends java.io.OutputStream {
        byte[] oneByte = new byte[1];
        java.io.RandomAccessFile archive;
        public final static short DEFLATE_METHOD = 8;
        public final static short VERSION_CODE = 20;
        public final static short MIN_VERSION = 10;
        public final static int  ENTRY_HEADER_MAGIC = 0x04034b50;
        public final static int  CATALOG_HEADER_MAGIC = 0x02014b50;
        public final static int  CATALOG_END_MAGIC = 0x06054b50;
        private final static short DISC_NUMBER = 0;
        ByteBuffer entryHeader = ByteBuffer.wrap(new byte[30]);
        ByteBuffer entryLater = ByteBuffer.wrap(new byte[12]);
        java.util.zip.CRC32 crcAcc = new java.util.zip.CRC32();
        java.util.zip.Deflater def = new java.util.zip.Deflater(java.util.zip.Deflater.DEFLATED, true);
        int totalCompressed;
        long MSEPOCH;
        byte [] deflateBuf = new byte[2048];
        public static final long SECONDS_TO_DAYS = 60 * 60 * 24;
         * Entry stores info about each file stored
        private class Entry {
            long offset;        // position of header in file
            byte[] name;
            long crc;
            int compressedSize;
            int uncompressedSize;
            java.util.Date date;
             * Contructor also writes initial header.
             * @param fileName Name under which data is stored.
             * @param date  Date to label the file with
             * @TODO get the date stored properly
            public Entry(String fileName, java.util.Date date) throws IOException {
                name = fileName.getBytes();
                this.date = date == null ? new java.util.Date() : date;
                entryHeader.position(10);
                putDate(entryHeader);
                entryHeader.putShort(26, (short)name.length);
                offset = archive.getFilePointer();
                archive.write(entryHeader.array());
                archive.write(name);
                catalog.add(this);
                crcAcc.reset();
                totalCompressed = 0;
                def.reset();
             * Finish writing entry data. Save the lenghts & crc for catalog
             * and go back and fill them in in the entry header.
            public void close() throws IOException {
                def.finish();
                while(!def.finished())
                    deflate();
                entryLater.position(0);
                crc = crcAcc.getValue();
                compressedSize = totalCompressed;
                uncompressedSize = def.getTotalIn();
                entryLater.putInt((int)crc);
                entryLater.putInt(compressedSize);
                entryLater.putInt(uncompressedSize);
                long eof = archive.getFilePointer();
                archive.seek(offset + 14);
                archive.write(entryLater.array());
                archive.seek(eof);
             * Write the catalog data relevant to this entry. Buffer is
             * preloaded with fixed data.
             * @param buf Buffer to organise fixed lenght part of header
            public void writeCatalog(ByteBuffer buf) throws IOException {
                buf.position(12);
                putDate(buf);
                buf.putInt((int)crc);
                buf.putInt(compressedSize);
                buf.putInt(uncompressedSize);
                buf.putShort((short)name.length);
                buf.putShort((short)0);  // extra field length
                buf.putShort((short)0);  // file comment length
                buf.putShort(DISC_NUMBER);  // disk number
                buf.putShort((short)0); // internal attributes
                buf.putInt(0);      // external file attributes
                buf.putInt((int)offset); // file position
                archive.write(buf.array());
                archive.write(name);
             * This writes the entries date in MSDOS format.
             * @param buf Where to write it
             * @TODO Get this generating sane dates
            public void putDate(ByteBuffer buf) {
                long msTime = (date.getTime() - MSEPOCH) / 1000;
                buf.putShort((short)(msTime % SECONDS_TO_DAYS));
                buf.putShort((short)(msTime / SECONDS_TO_DAYS));
        private Entry entryInProgress = null; // entry currently being written
        private java.util.ArrayList catalog = new java.util.ArrayList(12);  // all entries
         * Start a new output file.
         * @param name The name to store as
         * @param date Date - null indicates current time
        public java.io.OutputStream openEntry(String name, java.util.Date date) throws IOException{
            if(entryInProgress != null)
                entryInProgress.close();
            entryInProgress = new Entry(name, date);
            return this;
         * Creates a new instance of ZipOutputFile
         * @param fd The file to write to
        public ZipOutputFile(java.io.File fd) throws IOException {
            this(new java.io.RandomAccessFile(fd, "rw"));
         * Create new instance of ZipOutputFile from RandomAccessFile
         * @param archive RandomAccessFile
        public ZipOutputFile(java.io.RandomAccessFile archive) {
            this.archive = archive;
            entryHeader.order(java.nio.ByteOrder.LITTLE_ENDIAN);  // create fixed fields of header
            entryLater.order(java.nio.ByteOrder.LITTLE_ENDIAN);
            entryHeader.putInt(ENTRY_HEADER_MAGIC);
            entryHeader.putShort(MIN_VERSION);
            entryHeader.putShort((short)0);  // general purpose flag
            entryHeader.putShort(DEFLATE_METHOD);
            java.util.Calendar cal = java.util.Calendar.getInstance();
            cal.clear();
            cal.set(java.util.Calendar.YEAR, 1950);
            cal.set(java.util.Calendar.DAY_OF_MONTH, 1);
    //        def.setStrategy(Deflater.HUFFMAN_ONLY);
            MSEPOCH = cal.getTimeInMillis();
         * Writes the master catalogue and postamble and closes the archive file.
        public void close() throws IOException{
            if(entryInProgress != null)
                entryInProgress.close();
            ByteBuffer catEntry = ByteBuffer.wrap(new byte[46]);
            catEntry.order(java.nio.ByteOrder.LITTLE_ENDIAN);
            catEntry.putInt(CATALOG_HEADER_MAGIC);
            catEntry.putShort(VERSION_CODE);
            catEntry.putShort(MIN_VERSION);
            catEntry.putShort((short)0);
            catEntry.putShort(DEFLATE_METHOD);
            long catStart = archive.getFilePointer();
            for(java.util.Iterator it = catalog.iterator(); it.hasNext();) {
                ((Entry)it.next()).writeCatalog(catEntry);
            catEntry.position(0);
            catEntry.putInt(CATALOG_END_MAGIC);
            catEntry.putShort(DISC_NUMBER);
            catEntry.putShort(DISC_NUMBER);
            catEntry.putShort((short)catalog.size());
            catEntry.putShort((short)catalog.size());
            catEntry.putInt((int)(archive.getFilePointer() - catStart));
            catEntry.putInt((int)catStart);
            catEntry.putShort((short)0);
            archive.write(catEntry.array(), 0, catEntry.position());
            archive.setLength(archive.getFilePointer());  // truncate if old file
            archive.close();
            def.end();
         * Closes entry in progress.
        public void flush() throws IOException{
            if(entryInProgress == null)
                throw new IllegalStateException("Must call openEntry before writing");
            entryInProgress.close();
            entryInProgress = null;
         * Standard write routine. Defined by {@link java.io.OutputStream}.
         * Can only be used once openEntry has defined the file.
         * @param b  Bytes to write
        public void write(byte[] b) throws IOException{
            if(entryInProgress == null)
                throw new IllegalStateException("Must call openEntry before writing");
            crcAcc.update(b);
            def.setInput(b);
            while(!def.needsInput())
                deflate();
         * Standard write routine. Defined by {@link java.io.OutputStream}.
         * Can only be used once openEntry has defined the file.
         * @param b  Bytes to write
        public void write(int b) throws IOException{
            oneByte[0] = (byte)b;
            crcAcc.update(b);
            write(oneByte, 0, 1);
         *  Standard write routine. Defined by {@link java.io.OutputStream}.
         * Can only be used once openEntry has defined the file.
         * @param b  Bytes to write
         * @param off Start offset
         * @param len Byte count
        public void write(byte[] b, int off, int len) throws IOException{
            if(entryInProgress == null)
                throw new IllegalStateException("Must call openEntry before writing");
            crcAcc.update(b, off, len);
            def.setInput(b, off, len);
            while(!def.needsInput())
                deflate();
        * Gets a buffer full of coded data from the deflater and writes it to archive.
        private void deflate() throws IOException {
            int len = def.deflate(deflateBuf);
            totalCompressed += len;
            if(len > 0)
                archive.write(deflateBuf, 0, len);

  • Zip from OS Tiger yet cannot unZip without different OS Leopard

    I have Tiger 10.4.11 installed with 1.4.2_18 Java.
    I created a Zipped file using the Finder menu within the operating system. Now that I have the file it will not unZip without upgrading to Java 1.5 which requires Leopard. My hardware on both of my systems will not run Leopard.
    Why can't the operating system that zipped the file unzip it?

    I attempted to unZip using UnStuffIt but the file came up corrupted. I do not know whether this is truly corrupted this time or just the way StuffIt Expander describes a file it cannot unZip. I have seen that happen before many times.
    I took the file that was Stuffed instead of Zipped and it came out half the original size once it was expanded using StuffIt Expander.
    1024mb original file=>880mb stuffed=>660mb unstuffed
    The same file Zipped using the Zip application built in OSX only compressed to 980mb.
    A factor seems to be the 1gb size of the original file.

  • Cannot unzip .zip even with Archive Utility

    Hi,
    I have problem unzipping a .zip file. When I use the Archive Utility to unzip it, it yields a file with the same name with .zip.cpgz on its end. When I subsequently make another trial - to unzip this new file, it yields the very same file only with .zip.cpgz 2 in the end of its name. A repeated process (now with any of these files, either original, first .cpgz or second .cpgz 2) yields a file with appropriate .cpgz #. Repeating the process further seemed to me futile. I hope writing here would in the long run yield an unzipped original .zip file.
    Many thanks for your help,
    pwyll.

    You probably won't see this, but did you ever zip a file during this time and then unzip it with another program and find data missing? The same thing happened to me where I zipped an assignment with archive utility, then when I tried to unzip it it would just make copy after copy. Once it was unzipped by my professior there was missing data. THen when I downloaded another program to unzip the original zipped file, that data was missing, too! I tried it again and zipping the file kep deleting part of my file!

  • I have a macbook pro and I downloaded an ebook from the library, it is zipped and I cannot unzip. Downloaded software such unarchiver, no go. please help.

    I cannot open a zip file on my macbook pro, it is a download from the public library(ebook) I tried to download unarchive and others like it and no dice. Please can someone help me, I need step by step instructions, still learning on my mac. Thanks so much:)

    Download StuffIt Expander.  It's free!

  • How to unzip and zip files

    I have a very large number of Karaoke music that plays on my windows pc but some will not play on my Mac. I think i need to unzip & re-zip them to play on my mac but i'm not sure exactly how to do this. any suggestions? Do I need a special program? running os x 10.9.3

    Zip files can be opened with the built in 'Archive Utility' application. Double click any zip file & it will try to unzip it.
    This application is tucked away inside /System/Library/CoreServices/Archive Utility.  If you want to set preferences for it you need to open the location in Finder by using the 'Go Menu > Go to Folder…', enter /System/Library/CoreServices/ for the path & then open the Archive Utility application and look in it's preferences.
    I expect that zipping & rezipping will not do anything useful for you. I suspect that the file format is the issue.
    Unzip some files & post what the Finders 'File > Get info' panel shows, take a screenshot of it with 'cmd+shift+4', then drag the crosshairs to select the area. it will appear on the Desktop for uploading here.
    You may need to find a compatible player or find a way to convert them if the Mac cannot play them.
    P.S. to zip a file(s) select the items & right click, select 'Compress x items' & you will get a zip archive - I don't think it will help you though

  • Cannot unzip Oracle8i Enterprise edition

    I am trying to download & install Oracle8i Enterprise; cannot unzip files - get WinZips error message "Cannot open file: it does not appear to be a valid archive. If you downloaded this file, try to download it again". I tried it di not work.
    Windows 2000 NT
    MS Internet Explorer 5.5

    hi all
    is it a .zip or a .tar.gz?
    probably the download (FTP) was corrupted?!? It happens to me on
    floopies
    or maybe was zipped with some funny winzip...
    cheers
    rjh

  • Problem in unzipping the zip files

    Hi,
    I have created a program to unzip the zip files. But when i try to zip it is creating the zipped files outside the folder where it is to be zipped.
    what is wrong with my code.
    if the zip file is migration.zip
    if the path inside the zip file shows
    and the path inside says this
    /codebase/scripts/
    it would create migration folder and create codebase folder outside the migration folder
    what is wrong with my code
    //Unzip the zip files to the folder with their name
    import java.io.BufferedReader;
    import java.io.File;
    import java.io.FileOutputStream;
    import java.io.FilenameFilter;
    import java.io.IOException;
    import java.io.InputStreamReader;
    import java.util.Enumeration;
    import java.util.zip.ZipEntry;
    import java.util.zip.ZipFile;
    // Getting the path to find the type of files
    public class zipper implements FilenameFilter{
              String ext;
              public zipper(String ext)
                   this.ext="." + ext;
              public boolean accept(File dir,String name)
                   return name.endsWith(ext);
    public static void main(String args[]) throws IOException
              try
                        String dir = "D:/a/";
                        File f2 = new File(dir);
                        FilenameFilter fn= new zipper("zip");
                        String ss[]=f2.list(fn);
                   for ( int j = 0; j < ss.length; j++)
                        System.out.println(" Extracting ...." + ss[j]) ;
                        String zipFile = dir + ss[j];
                        ZipFile zf = new ZipFile(zipFile);
                        Enumeration entries = zf.entries();
                        String directoryName = zf.getName();
                        directoryName = directoryName.substring(0, (directoryName.indexOf(":" + File.separator) + 2));
                             String folderName = zf.getName();
                             folderName = folderName.substring(0, folderName.lastIndexOf("."));
                             File file1 = new File(folderName);
                             //File file1 = new File(entries.getName());
                             file1.mkdir();
                   while (entries.hasMoreElements())
                             ZipEntry ze = (ZipEntry) entries.nextElement();
                             String path = directoryName + ze.getName() ;
                             String path1 = folderName + ze.getName();
                             //System.out.println(" : " + path);
                             if (ze.getName().endsWith("/"))
                                       File file = new File(path);
                                       file.mkdir();
                                       continue;
                                       //break;
                        BufferedReader bReader = new BufferedReader(new InputStreamReader(zf.getInputStream(ze)));
         StringBuffer fileBuffer = new StringBuffer(" ");
         String line ;
                        while ((line = bReader.readLine()) != null)
                                  fileBuffer.append(line);
                                  fileBuffer.append("\r\n");
                                  //line = line + "\r\n";
                                  //byte[] b = new byte[line.length()];
                                  //b =line.getBytes();
                                  //out.write();
                        String fileData = fileBuffer.toString();
         File f1 = new File(path);
                        f1.createNewFile();
                        //FileOutputStream out = new FileOutputStream(folderName + "/" + ze.getName());
                        FileOutputStream out = new FileOutputStream(path);
                        long size = ze.getSize();
                        byte[] data1 = new byte[fileData.length()];
                        for (int i = 0; i < fileData.length(); i++)
                                  data1[i] = (byte) fileData.charAt(i);
         out.write(data1);
         out.close();
                        bReader.close();                         
                   } catch (Exception e)
                             e.printStackTrace();
    Thanks in Advance
    Avinash

    String path = directoryName + ze.getName();
    String path1 = folderName + File.separator+ ze.getName();
    File f1 = new File(path); // pass path1 instead of path
    f1.createNewFile();
    FileOutputStream out = new FileOutputStream(path); // pass path1 instead of path

  • Problem in Unzipping the zip file

    Hi
    I have created a program to unzip the zip files in the folder named after the zip file
    it is working well well when u try to zip zip files put in a directory
    i.e u create a folder name contents and put files into that and then zip it
    but when u directly create a zip file , without putting in a folder
    it creates the folder and zip the files outside the folder
    Another problem is that with the path
    for e.g. suppose the zip file name is contents and path should show
    contents/filename.txt but there are some other files whose path shows
    res/file.txt. In this case it creates a folder of res and put it outside the
    folder with the name of zip file
    I have pasted my code :
    //Unzip the zip files to the folder with their name
    import java.io.BufferedReader;
    import java.io.File;
    import java.io.FileOutputStream;
    import java.io.FilenameFilter;
    import java.io.IOException;
    import java.io.InputStreamReader;
    import java.util.Enumeration;
    import java.util.zip.ZipEntry;
    import java.util.zip.ZipFile;
    // Getting the path to find the type of files
    public class zipper implements FilenameFilter{
              String ext;
              public zipper(String ext)
                   this.ext="." + ext;
              public boolean accept(File dir,String name)
                   return name.endsWith(ext);
    public static void main(String args[]) throws IOException
              try
                        String dir = "D:/";
                        File f2 = new File(dir);
                        FilenameFilter fn= new zipper("zip");
                        String ss[]=f2.list(fn);
                   for ( int j = 0; j < ss.length; j++)
                        System.out.println(" Extracting ...." + ss[j]) ;
                        String zipFile = dir + ss[j];
                        ZipFile zf = new ZipFile(zipFile);
                        Enumeration entries = zf.entries();
                        String directoryName = zf.getName();
                        directoryName = directoryName.substring(0, (directoryName.indexOf(":" + File.separator) + 2));
                             String folderName = zf.getName();
                             folderName = folderName.substring(0, folderName.lastIndexOf("."));
                             File file1 = new File(folderName);
                             //File file1 = new File(entries.getName());
                             file1.mkdir();
                   while (entries.hasMoreElements())
                             ZipEntry ze = (ZipEntry) entries.nextElement();
                             String path = directoryName + ze.getName() ;
                             String path1 = folderName + ze.getName();
                             //System.out.println(" : " + path);
                             if (ze.getName().endsWith("/"))
                                       File file = new File(path);
                                       file.mkdir();
                                       continue;
                                       //break;
                        BufferedReader bReader = new BufferedReader(new InputStreamReader(zf.getInputStream(ze)));
         StringBuffer fileBuffer = new StringBuffer(" ");
         String line ;
                        while ((line = bReader.readLine()) != null)
                                  fileBuffer.append(line);
                                  fileBuffer.append("\r\n");
                                  //line = line + "\r\n";
                                  //byte[] b = new byte[line.length()];
                                  //b =line.getBytes();
                                  //out.write();
                        String fileData = fileBuffer.toString();
         File f1 = new File(path);
                        f1.createNewFile();
                        //FileOutputStream out = new FileOutputStream(folderName + "/" + ze.getName());
                        FileOutputStream out = new FileOutputStream(path);
                        long size = ze.getSize();
                        byte[] data1 = new byte[fileData.length()];
                        for (int i = 0; i < fileData.length(); i++)
                                  data1[i] = (byte) fileData.charAt(i);
         out.write(data1);
         out.close();
                        bReader.close();                         
                   } catch (Exception e)
                             e.printStackTrace();
    Thanks in Advance
    Avinash

    String path = directoryName + ze.getName();
    String path1 = folderName + File.separator+ ze.getName();
    File f1 = new File(path); // pass path1 instead of path
    f1.createNewFile();
    FileOutputStream out = new FileOutputStream(path); // pass path1 instead of path

  • Unzip a zipped file?

    How can I unzip a zipped file with java ?

    I presume you've read the API of [url http://java.sun.com/j2se/1.4.1/docs/api/java/util/zip/ZipFile.html]ZipFile?

  • Unzip a zip file

    Can someone help me for the following problem,
    Iam downloading a zip file from the server to the client.i want to unzip and execute the .EXE file, which is inside the zip file through the java coding.can any one help me!
    thanking you

    I think you can do all of this using the Java runtime interface which allows you to execute command line commands via Java code (ie, launching an EXE).
    See http://java.sun.com/j2se/1.4.2/docs/api/java/lang/Runtime.html
    I don't believe there is a component of the Java API that allows you to unzip a zip file. But you could still accomplish this using the winzip command line support. See http://www.winzip.com/wzcline.htm in combination with the Java runtime.

  • Unzip a .zip file programatically??

    Hi all friends,
    I want to unzip a .zip file programatically.For that if any one can give me some code then it will be very help full for me.
    Thanks & Regards
    Bikash

    this thread has some code
    http://forum.java.sun.com/thread.jsp?forum=31&thread=417611
    asjf

  • Cannot unzip files in lion

    Hi my wife, on a macbook air 2011, and Lion cannot unzip some files, actually she can unzip, but they do not appear correctly when unzipped (PPTX), whereas on my macbookpro 2009 with snow leopard i can, anybody have any ideas on how this can be fixed, i don't want to have to do all the work for her, she receives many files.
    I cannot atach the files as they are under NDA

    ok, Mark, thanks, but i am not that stupid if i can open them in my macboopro....
    she has office 2011.Anyway from the apple side it seems all is ok, this happened also on a windows computersomething about microsfot not being able to read its own crappy files, i can open them with Lotus symphony.
    Thanks for all the help, it seems it is a microsoft problem (stupid company, why does anyone actually use their crap, nobody can tell me)

Maybe you are looking for