Cannot update and restore my iphone 4
i try couple times but ived got errror -48 during back uo and error
have you tried a hard reset?
press and hold the top power button and the home button at the same time for about 6seconds until you se an apple apear, then release both. Your phone should then boot up.
if that doesnt work,
http://osxdaily.com/2010/06/24/iphone-dfu-mode-explained-and-how-to-enter-dfu-mo de-on-your-iphone/
Similar Messages
-
HT201210 I cannot update or restore my iphone 5 cause of error 3014
I cannot update or restore my iphone 5 cause of error 3014
Read the article from which the question was posted, it addresses errors and their resolutions.
-
I recently updated and restored my Iphone on a Mac. My music was erased, therefore, I am trying to sync all of the music from my computer into the iPhone, but it says that I need to use the original computer/itunes in order to sync, but it is the same computer and iTunes account. The error reads: The iPhone, "Name" is synced with another iTunes library. Do you want to erase this iPhone and a sync with this iTunes library? If I click "Erase and Sync," will it delete my contacts, apps, etc?
The following may help: iOS: Device not recognized in iTunes for Windows
-
since updating and restoring my iphone 3gs it no longer can find my sim itunes cant activate it because no sim inserted can anyone help
That usually means the phone was hacked or jailbroken to unlock the phone and when you update the phone it locked back up again.
Only way to resolve this issue, is to find out who the orignal carrier was and have them unlock it. If you bought this from a 3rd party contact the seller and have him/her unlock it for you by contacting the phone carrier. -
I have updated and restored my iphone and now it wont go bask the connect to itunes screen what do i do?
So what happens when you connect to iTunes?
-
I updated and restore the iPhone 4. Now, SIM not valid.
I updated the iPhone after that I thought restore the iPhone, so I could use it. But after I restore the SIM not valid
Either the SIM failed, or, more likely, the phone was hacked / jailbroken to unlock it before you updated.
Find out who it's locked to and contact that carrier. ONLY the carrier it is locked to can authorize legitimately unlocking it. -
I am having a problem updating my iPhone 5, it keeps giving me a message stating that it was unable to restore my phone and the error is an unknown error (3004)
Hello Norm Baines,
Go through the section 5. Verify that the Apple Mobile Device USB Driver is installed from the link below
http://support.apple.com/kb/ts1538 -
Cannot update or restore my Iphone
Every time I plug my iphone into my computer (a PC) the screen pops up saying that I need to either set it up as a new iphone or restore from a previous backup. I really don't want to do either but decided to I save all of my photos onto my computer and try the restore. But when I try the restore it says that It cannot restore because the backup session failed. Any suggestions/help would be greatly appreciated!
Read the article from which the question was posted, it addresses errors and their resolutions.
-
I was trying to restore and update my phone and my itunes in the lappy.it says we're sorry.ur phone can't be restore right now
That message usually indicates that your phone was hacked or jailbroken to unlock it.
Then when you updated your phone it locked back up to the original carrier. -
please help me to update and restore my iphone 5? beacause after updating to iOS 7, i can no longer updater and restore my phone. it always comes in error
I'm having the identical problem on my iPhone 4 after upgrading to IOS 7--no ability to update apps or download new apps. Here is what Apple tech support emailed to me:
I understand that you are unable to download or update applications after updating iOS7 on your iTunes. I know you must be eager to get this resolved and I will be happy to help you today.
... to help you better with this issue I would request you to please try this steps given below to resolve your issue.
Please follow this steps:
1) Double tap the home button
2) Hold down on an icon
3) Tap the red "X" on iTunes, and the App Store.
4) Tap Settings > Store > Tap your Apple ID, and choose sign out
5) Tap Settings
6) Tap General
7) Tap Reset
8) Tap Network Settings
Once it has been closed with multi-tasking, and you have rebooted the device in the network settings reset, please sign in, and try again.
Howevr, if you are facing the same issue than for this issue, you may need to call our AppleCare technical support team. A technical Advisor will be able to tell you about Apple's complimentary and fee-based support. The technical Advisor can also assist you in determining what option might be most helpful to you in this case.
Mildly amusing that the instructions for force-closing a program are the IOS 6 instructions, which do not work on IOS 7.
Otherwise I'm having a little success with this. Some apps (not all) are updating. It seems that a few more apps update each time I go through the process (close everything, sign out, and either reset or reboot, then go to the app store, sign in and try to update all). So far it has been a very lengthy, iterative process. -
HT201210 my iphone 4s has been updated and restored but still wont turn on wi-fi
I have updated and restored my iphone 4s but it still wont turn on wi-fi
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
Unable to update and restore my iphone to itunes, unknown error 1015 pops up and my iphone has frozen and unable to reset.
https://discussions.apple.com/message/15021399#15021399
-
How do I transfer all photos and music from my old iphone 3gs to new iphone 4s? I have a new laptop because the old one broke and so do not have non camera roll photos or music stored anywhere apart from the iphone 3gs and cannot update io5 on the iphone 3gs without erasibng everything. i need help!!!
Syncing to a new iTunes library or computer will erase your phone. Only if you back up manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your device without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPhone for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved:iTunes: About iOS backups
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device -
cannot update and download ios 5 to iphone 4 or ipad...everytime i try i get half way through a 2 hour download for it to say "network connection timed out" what do i do to download
When you get anything that says your network connection timed out it either means you lost internet connection or there is something blocking the connection between the computer and the servers that it is trying to connect to.
If you have a solid internet connection and can browse to websites fine it's either an anti-virus program or a firewall on the computer OR a firewall in the router's settings that you use to connect to the internet.
Reconfigure any security software to allow Apple's servers to pass.
Useful information for configuring your security software:
IMPORTANT: iTunes must be allowed to contact Apple using the following ports and servers:
▪ port 80
▪ port 443
▪ phobos.apple.com, deimos3.apple.com, albert.apple.com, gs.apple.com, itunes.apple.com, ax.itunes.apple.com, ax.init.itunes.apple.com, ax.phobos.apple.com.edgesuite.net
iTunes uses well known ports and these ports may need to be opened for iTunes: 80, 443, 3689, 5297, 5298, 5353, 8000-8999, and 42000-42999.
iTunes also contacts VeriSign servers during an iPhone restore and activation:
▪ evintl-ocsp.verisign.com
▪ evsecure-ocsp.verisign.com
For more information see Update and restore alert messages on iPhone and iPod touch
Temporarily disable or uninstall your security software
If the current available version of your security software is incompatible with iTunes, you can disable the security software and test if it is the source of the issue. It might also be necessary to temporarily uninstall security software after making sure you can reinstall it and note any required licenses. A temporary deinstallation might be required because parts of some security software remain active in the background though they appear to be deactivated.
To reduce any security risks that security software is designed to prevent, consider making sure all files needed to reinstall it are available and disconnect network connections before uninstalling security software. Should this not be possible, such as if a download without active security software is required, that required step should be the only process completed without security software. For assistance in checking your configuration, disabling, or uninstalling your security software, please contact the manufacturer.
Once disabled or uninstalled, perform only the steps required to verify your issue has been resolved. Complete whatever update, restore, syncing, back up, activation, or other task you were troubleshooting. Once that task is complete, install and configure compatible security software to ensure your PC is protected.
If it isn't a program or software on the computer contact your Internet Service Provider and/or Router Company to configure or disable the firewall in the router settings.
To isolate the issue to this you can also try disconnecting the router and plugging your computer directly in to the modem but this does not help for troubleshooting time-out issues directly on any apple mobile devices only if you are syncing or going through iTunes on the computer. -
i have this error ''the iphone *** cannot be updatet at this time because the iphone software update server could not be countacted ore is temporarily unavailable'' i have 2-3 days tha try to update or restore the iphone but tha same again :/ plzz helppp
Try updating directly on the device, via iTunes on the computer, and iTunes on a different computer.
If the iPhone has been hacked or jailbroken, it may not be possible to update.
Maybe you are looking for
-
How to re-calculate a column value based on another column value in the same ADF Table row
Hi, I'm using Jdeveloper 11.1.2.3.0. I have an adf table with 2 columns, columnA and columnB. When the value changed in ColumnA, 1) i need to call a PLSQL and update the ColumnB value that is returned from PLSQL. 2) Show a warning message if the exis
-
Connect macbook to windows network
Trying to connect a workmate's macbook to MS SBSSRV 2008... absolutely no joy...
-
Same message type in Diffrent Interface IDoc-HRMD_A
Hi All. i am using standard message type HRMD_A iin one IDoc and have done coding in one of the Function Exit ..EXIT_SAPLRHA0_001 now if some other interface is also running using same satndard message type then how can i restritct my EXIT code to r
-
Change source location in PKGBUILD
Is there a way to change the PKGBUILD script to use the source file I have already downloaded? This is for my son's computer that is not attached to the web. I have tried changing the source line to /home/justin/builds/gcompris/gcompris.8.4.tar.gz.
-
How do I wake my computer via ethernet?
I have a PowerMac that is connected to a Laser printer and I have to keep it on all the time so my other computers can print from it, how do I make it where that computer will automatically wake up when somebody tries to print?