Cannot update BIOS on Tecra A9 due to the admin rights

Hello,
I want to update the BIOS of my A9 Tecra from 1.70 to 2.10 for (Windows XP SP 2).
When I start the update (P0054v210.exe), I get the error message: "[Error] The starting of service was aborted. The user does not have administator privilieges".
The eventlog entries are:
Application:
ErrorCode: 9
Source: CHGBIOS
Description: "CHGBIOS" (The complete message are on german and this forum not allow german error messages, because they "contains profanity or inappropriate language")
System:
ErrorCode: 7000
Source: Service Control Manager
Description: "NCHGBIOS2SVC" not found. (The complete message are on german and this forum not allow german error messages, because they "contains profanity or inappropriate language")
I started the update as the local Administrator but it doesn't work.
Can someone help?

Ive heard that the common modules are very important, so I would reinstall the common modules and try the BIOS update again.
Are you sure your Antivirus is not blocking the BIOS update? Disable it and see how that goes.

Similar Messages

Cannot Update BIOS on Tecra M7

Hello,
I'm trying to update my BIOS to get my Tecra M7 to recognize Intel's virtualization extensions. I downloaded version 3.50 of both the update for "Tecra M7" and "Tecra M7-7311," and neither work. Both tell me that my computer isn't supported, both when upgrading within Windows and when updating using a boot CD.
Does anyone have any suggestions as to how to make this work?
Thx.

So far as I know, only a very few of Toshiba's computers have a BIOS that supports hardware virtualization. You probably need to call their customer support in your country to find out which ones.
What is the part number of your Tecra M7? It looks something like PTM71E-00M00GEN or PTM71C-GH10TE or PTM71A-006005.
-Jerry

All of a sudden my ATV came up with a message stating trying to set dat and time however cannot access. Could this be due to the recent hacking of Apple or is it something new. How do I fix?

All of a sudden my ATV came up with a message stating trying to set date and time however cannot access. Could this be due to the recent hacking of Apple or is it something new. How do I fix?

Welcome to the Apple Community.
It's not related to any hacking.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    1.    Restart the Apple TV (Settings > General > Restart).
    2.    Restart the Apple TV by removing ALL the cables for 30 seconds.
    3.    Restart your router.
    4.    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    5.    Restore the Apple TV (Settings > General > Reset > Restore)

I am now using 10.6.8. Downloaded Maverick but cannot update OS on HD because get message the disk is not formatted as Mac OS extended(journaled). Tried to use Disk Utility as per instruction but cannot complete operation.

I am now using 10.6.8. Downloaded Maverick but cannot update OS on HD because get message the disk is not formatted as Mac OS extended(journaled). Tried to use Disk Utility as per instruction but cannot complete operation.

Barney-15E:
The partition method worked after some trepidation. I got the spinning beach ball after partitioning and couldn't go further till I named the second partition. That may have done it. Right now, things seem to be working o.k. I'm updating a current iPhoto and will have to get a MS Word program that will function on the current OS and a current Quicken.
If necessary, can start up from the 10.6.8 system which I downloaded to an external HD before updating. I can always fall back on that. Also, I hope I don't get too many disconnects. Thank you for your help.

My problem, cannot update application, how i want to change the store.

my problem, cannot update application, how i want to change the store.

Hello there muhamadamirul,
To change the region your Apple ID is using use these instructions.
Change your iTunes Store country
Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information.
From: iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Regards,
Sterling

Error 1321 when updating Adobe Acrobat Pro even if profile has admin rights and parent folder has full access privileges.

Error 1321 when updating Adobe Acrobat Pro even if profile has admin rights and parent folder has full access privileges.
Exact error below:
error 1321: the installer has insufficient privileges to modify the file C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Xtras\AdobePDF\I386\[dll file]
Thanks in advance!

My first thought is to not just apply permissions to the folder but be sure to apply them to all objects inside them. It would be interesting to see if you can rename this file, then rename it back to its original name; this would test permissions nondestructively.

Re: Cannot update BIOS from 1.5 to 1.6 on Tecra T 9100

I have problems with updating the BIOS of my Tecra 9100. The current version is 1.5, and I want to update it to 1.6, so that the UJ-820 DVD-RAM will work.
I have tried to do with the windows tool within the Zip-File (error message: User does not have administrator privileges), and with bootdisk (error message: unknown chipset).
What can I do next?

Hi
First of all the BIOS update will not help you to solve the CD/DVD drive IDE #1 issue.
Secondly I assume you are using the Win XP and if you want to update the BIOS you have to do this from running Win XP!
Furthermore I read in different threads that the Common Modules must be installed in order to start the BIOS update procedure.
PS: Check if you could start the BIOS exe file using right click and choosing Run as
Then you could choose the Admin account.

Thinkpad A30: Cannot update BIOS

Hi,
I have a Thinkpad A30 2652-3WG BIOS v1.03, which I recently revived, installing Windows XP SP3.
I noted that the graphics driver required BIOS v1.14 or higher. Having an old BIOS v1.03, I downloaded BIOS v1.19 and tried to update.
But no matter what I do, whether I choose the floppy or non-floppy version, or even an older BIOS: When I get to the point where I answer "Yes" to start the BIOS update procedure, I get the error:
"System program update is currently disabled. The process has been canceled."
I have checked through all options in the Bios setup, as well as in the Thinkpad Configuration tool in the Control Panel, but I cannot find any settings for enabling/disabling Bios updates. The only think I've found, is an option to enable update through LAN, which is enabled by default.
Any ideas?
Solved!
Go to Solution.

Welcome to the forum!
A complete shot in the dark on my part, but doesn't cost you anything to try: remove the CMOS (BIOS) battery for an hour, and the main battery at the same time. Keep the machine unplugged throughout this period of time.
Before doing all of the above, please make sure that no Supervisor or BIOS passwords are enabled, so you don't get locked out of the system.
Plug everything back and see how it goes.
Good luck and let us know.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Cannot update Bios, already changed DEP settings (error - 1275)

I have tried the suggested solution to adjusted the DEP settings according to the knownledgebase searches i did, I am only running one user account which is also the admin, and I still cannot get my bios to update.
m55 8811-d1u
Win 7 Ultimate 64bit
5gb PC5300
80gb factory hdd
Radeon HD 4550

Flashing the BIOs from within the OS is not recommended. Download and burn the CD .iso file.

Cannot update iPod to 2.0 due to "unknown error (1417)"

Help! I cannot update my iPod (5th Generation). I keep getting a message that says it cannot be updated due to "unknown error (1417)"

some folks have been having some success with getting past the 1417s by using eboncairn's technique. see:
eboncairn: iTunes7 & 5th gen iPod updating - is this possible solution? (winXP)

X120e update BIOS failed "Driver Loading Failed. The Utility cannot proceed"

I was tried to update Bios to 1.12 but not successed..
It always came out this message " Driver Loading Failed. The Utility cannot proceed."..
I tried to update under safe mode, still not work..
I tried to use Winflash, it came out "Cannot open new BIOS file"..
There's only one method that I didn't try is that burn a ISO CD and connect to External CDROM.. but I don't have External CDROM..
The reason that I update Bios is that I want to install Toolbox; otherwise, I won't take this risk..
For futhermore information click following link..
http://forums.lenovo.com/t5/ThinkVantage-Technologies/This-version-of-Lenovo-ThinkVantage-Toolboox-i...

Sounds like something wonky with your Windows install. I'd avoid doing a BIOS update through such an install.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Cannot access BIOS on Tecra M11-11K after Supervisor password has been set

Hi there,
I've got 10 laptops Toshiba Tecra M11-11K here and they all have the same problem. If they turned on and I enter the BIOS to make adjustments for the first time, it's fine but if I want to return to BIOS after couple of restart (or even one), what happens when I press F2 is that the screen flashes and computer restarts. It does it on all 10 laptops. Anyone knows what to do with that? Flashing BIOS means I have to setup all of them before I can do that, which is a bit of a drag and I don't have guarantee it's gonna work. :/
Thank you,
J

Nope.
When I removed the notebook from the box, I entered the BIOS to change the BOOT order (Network First), setup Supervisor Password and changed SATA to Compatibility mode. Then I saved changes and rebuild the notebook from a WDS.
When done I wanted to change the boot order to HDD only but everytime I press F2 to enter BIOS, the screen only flashes with a blank screen, and computer restarts and I'm back at the Toshiba logo (the one you see when you turn on computer) and that is happening everytime I press F2 to enter BIOS.
It only restarts and comes back with Toshiba logo. Press F2, it restart and Toshiba logo is up again. :/
I tried to update BIOS, but no luck.
I can enter the BIOS only once, when unpacked from the BOX. After that, no chance. 10 laptops have the same problem.
Model Toshiba Tecra M11-11K (PTME0E).

Cannot update BIOS anymore

Hello, i cannot update my BIOS anymore and i need some help, here is what happened: i bought this laptop somewhere in 2011 and i bought Windows 7 (i accidentaly got 32bit instade of 64bit because i forgot that in this laptop is 64bit cpu) and near the end of 2011 or at begining of 2012 i installed BIOS update from HP support assistant, and in 2013 (i think) i got notification from HP support assistant about new BIOS update and i tried to update it but i couldnt run setup because my 300GB local disk C and 2GB HP_tools F disks were both totaly full so i gave up but now in 2015 i remembered about that update and i cleaned my disks and opened HP support assistant and checked for updates but it dosent give me option to update my BIOS anymore, please help.
If you need my computer specs let me know.
Sorry for my bad English.
Please reply.
Thanks in advance.

Hi,
You're welcome.
There are several bios versions listed between your current one and the update I linked to, however most of these just add support for newer models - HP bios updates are cumulative, so any fixes/enhancements etc in previous versions will be applied by installing the latest.
However, I don't believe the update will give you the option of disabling (ie Fixed Mode) the Intel gpu - in fact, the only real benefit of upgrading to this bios version is if you're considering running Windows 8 as it adds support for Windows 8 'wireless button' control.
On balance and if everything is working Ok at the moment, you may well be best advised not to upgrade ( unless you're considering Windows 8 ) - if you do decide to update, flashing back to your current version from a much later revision may not be possible ( this can be blocked if there's a known issue with reverting ).
At the end of the day, flashing the bios always carries a small risk.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Updating BIOS on Tecra A10-IC5

Dear members
I have the Tecra A10-IC5 (-ptsb0e-03d01ken), and have *windows 8* installed on it. It was my wish to update the bios to the latest version.
Accordingly I navigated to the Toshiba website, and, using the auto-detect tool that Toshiba provide, was directed to the drivers list for my model.
The list of drivers included bios update, and it was designated as "operating system independent".
Therefore I downloaded and unpacked the file, and launched the program.
(bios 2009110452403)
However as soon as I did this the program abruptly terminated with the message "this computer is not supported"
With that in mind I would like to request advice - could anyone please tell me what I must do to update bios
thanks you
Ian

> Please do you know whether I would be able to update bios if I booted from a Linux live cd eg Linux mint.
WIN update is designed to e installed in Windows only. Toshiba doesnt support Linux and dont create any software that can be used with it.
> please do you know what improvements the latest bios would offer over the one that was installed when the laptop was new.
Unfortunately Toshiba Europe doesnt offer list with exact explanation what is new.

Update Bios on Tecra 8000

Hi
I update bios in my tecra 8000 SUCCESSful.
''ROM WRITE SUCCESSful, Utility Finished. BIOS FILE: Tecra8000 v 9.30''
I can turn on my laptop (Press POWER) but display is black and tecra not loading:(((
When I find older version Bios
I have PII 266Mhz
Help Me :(
Message was edited by: adi83ek

Hi Tomek,
Unfortunately you will not be able to load an older version of the BIOS. The BIOS update utility automatically checks that the version being loaded is more recent than that already installed and if it is not it will not be loaded.
To revert to an older BIOS you will need to go to an Authorised Service Partner who can 'flash' the BIOS chip to remove the current BIOS and then load the earlier one.
regards,

Cannot update BIOS on Tecra A9 due to the admin rights

Similar Messages

Maybe you are looking for