Cannot update contacts from within the pc suite
so, i've installed the latest version of pc suite but that didn't work, i've deleted it and run the pc suite cleaner, deleted the sms app from the phone and reinstalled everything. i can sync with outlook (set to sync in one way from phone to outlook) without a problem but i want to add extra info to the contacts in the phone. i have clicked on the contacts icon in the pc suite and all my (old)contacts are listed, when i click update, i get the update window appear with the blue and green dots but it just runs for ages before another window opens and says:Warnings
The following warnings were produced during the synchronisation:
The Synchronisation has been Terminated!
PC Sync information.
The Synchronisation has been Terminated! PC Sync could not update the data to the mobile phone.
PC Sync information. PC Sync was not able to send data to the mobile phone.so whats up here then? everything else seems ok? any ideas?Cheers
Rich
Nexu 5
I have no answer, just to say that I have had this problem for some time. I will dispose of my 9300 as soon as I have found a way out and go to a Msoft Mobile platform.
Club Nokia deny that there is a problem with the Software and sy that I should return the 'phone. Of course my retailer does not provide an equivalent 'phone so that is no good (as I run my business from my 'phone).
It may take a number of weeks (indeterminate) for Nokia to update the software on the phone. (Most Nokia service centres are unable to do this so by some wierd process I pack the phone and arrange at my expense to send it to their central service organisation. Whatever happend to the customer here?)
It's clear from a trawl of the internet that this is a serious problem, as a long time Communicator user (since the first 9000) I am very disappointed with Nokia's lack of support on this problem and would suggest that you don't waste your time trying to solve it.
Similar Messages
-
I cannot email photos from within iPhoto (v. 9.5.1). When I hit send I get a message: "Your email did not go through because the server did not reply." This happens for both my iCloud account and my Shaw account. What to do???
Are you able to email from Mail with those two accounts? If so:
1 - go to iPhoto's Accounts preference pane and delete both accounts. Now add them back and try again.
2 - a better solution IMO is to set Mail as the email client for iPhoto is iPhoto's General preference pane. This gives you better access to your contacts, a sent copy of all emails and, if you want a layout similar to iPhoto's, photo layouts located in Mail's stationary. -
I recently updated my iPhone 4s to ios6, and lost 1200 odd contacts. I recently sold my macbook air and also my mac book pro, so have no recent backups avaiable. I have a backup from about 4-5 months ago available on an external hdd as a time machine backup. Can I add/update contacts from the back up rather than restore? The reason i wish to do this is because in the update i didnt lose any messages, so all of the people i have met and networked with since that last update those many months ago, i have in my messages listings. They are all unidentified numbers at present but over time i will be able to work through the messages and based on the conversation recall who each was with. Also, yesterday, some two weeks after the update had left my contacts list entirely empty... a vast majority just reappeard, though all of them are without any phone numbers, all just emails or facebook contacts. This is the work of facebook not mac/ios6 isnt it...? Any help here would be greatly apprecaited. I am about 2 days from flying to canada and having those contacts would make life a lot easier.
You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.
-
I have CS 6 installed on a Win 7 OS machine. I can not connect to the internet to get updates from within the program. How do I fix this?
IP routing doesn't work the way many folks might initially think it does; functional IP routing requires manual configuration and the establishment of static routes and default routes specific to the local network configurations, and it's very easy to get it wrong, or to get the default route swapped. Multiple NIC boxes don't magically work, either. (Been there, done that, wondered what happened to my network when the paths got reordered or my route settings were messed up, etc.)
Routing configuration errors can be quite subtle, too. (Again, voice of experience. Ever had a thousand-seat office LAN accidentally routing through your desktop? As the, um, unnamed guilty party discovered, getting into that configuration was subtle. Seeing the performance crater on the fellow's box and on the LAN was obvious.)
Knowing how IP routing works is a prerequisite to getting this configuration to work; there's manual configuration required. Clearly something has gone weird here.
What to do? Read up on IP routing. I'll again suggest the threads and the manual mentioned earlier.
And in general, I prefer to avoid using my comparatively expensive Mac boxes as sub-optimal IP routers or as firewall boxes. General-purpose operating systems and generic x86 boxes are going to be inherently poor IP routers. Dedicated routers (or embedded or surplus x86 boxes with routing software loaded) offload the Mac boxes here, and are also typically easier to configure manage. And "real" IP routers can have hardware specific to efficiently routing packets. Use of an outboard firewall or firewall-router box also greatly simplifies gateway routing, too; it's a configuration that many folks and many businesses tend to use. -
I want to purchase from within the game and show me what is the solution of this letter: Please advise and thank you (Your purchase could not be completed. For assistance, contact itunes support at)
You need to click here and ask the iTunes Store staff for assistance.
(100508) -
Upgraded to Mavericks and iMovie 10 on a mid 2012 MBP. I cannot upload to youtube from within the app or the files exported to the finder. Any ideas?
Upgraded to Mavericks and iMovie 10 on a mid 2012 MBP. I cannot upload to youtube from within the app or the files exported to the finder. Any ideas?
-
I cannot ping any VIP from within the ACE or from rservers
I cannot ping any VIP from within the ACE or from rservers. Is this expected? I have rservers in other serverfarms that need to be able to communicate with the VIP of other serverfarms. Any help is greatly appreciated.
Thanks for you reply. here is the config. I removed other rserver and serverfarm config that does not have to do with this issue.
logging enable
logging fastpath
logging standby
logging console 4
logging timestamp
logging trap 4
logging history 4
logging buffered 4
logging persistent 4
logging monitor 4
logging device-id hostname
logging host 172.26.254.185 udp/514
logging host 172.26.221.25 udp/514
access-list INBOUND line 8 extended permit ip any any
access-list INBOUND line 16 extended permit icmp any any
access-list INBOUND line 24 extended permit tcp any any
access-list INBOUND line 32 extended permit udp any any
access-list ORADB line 8 extended permit tcp any any
probe http CITRIX
interval 30
passdetect interval 15
passdetect count 6
open 1
probe tcp HYPERION
port 19000
interval 2
faildetect 2
passdetect interval 2
passdetect count 2
receive 2
open 1
probe icmp PROBE_SERVICE_ICMP
interval 5
passdetect interval 5
probe tcp W15SPSWFET001_PROBE
interval 5
passdetect interval 5
connection term forced
open 1
parameter-map type connection TIMEOUT
set timeout inactivity 43200
parameter-map type http test
persistence-rebalance
set header-maxparse-length 2006
rserver host w0bairwatch003
description MDM-SEG
ip address 172.20.60.73
inservice
rserver host w0bairwatch004
description MDM-SEG
ip address 172.20.60.74
inservice
rserver host w0bairwatch005
description MDM-DEVICE
ip address 172.20.60.75
inservice
rserver host w0bairwatch006
description MDM-DEVICE
ip address 172.20.60.76
inservice
rserver host w0bhamobile001
description Lotus Notes Traveler Server
ip address 172.20.60.57
inservice
rserver host w0bhamobile002
description Lotus Notes Traveler Server
ip address 172.20.60.58
inservice
serverfarm host MDMDEVICE
predictor leastconns
probe PROBE_SERVICE_ICMP
rserver w0bairwatch005
inservice
rserver w0bairwatch006
serverfarm host MDMSEG
predictor leastconns
probe PROBE_SERVICE_ICMP
rserver w0bairwatch003
inservice
rserver w0bairwatch004
inservice
serverfarm host TRAVLR
predictor leastconns
probe PROBE_SERVICE_ICMP
rserver w0bhamobile001
inservice
rserver w0bhamobile002
inservice
class-map match-all MDMDEVICE-VIP
2 match virtual-address 172.20.48.35 any
class-map match-all MDMSEG-VIP
2 match virtual-address 172.20.48.33 any
class-map type management match-any REMOTE_ACCESS
description Remote access traffic match
201 match protocol ssh any
202 match protocol telnet any
203 match protocol icmp any
204 match protocol https any
205 match protocol http any
206 match protocol xml-https any
207 match protocol snmp any
class-map match-all TRAVLR-VIP
2 match virtual-address 172.20.48.34 any
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
permit
policy-map type loadbalance first-match MDMDEVICE
class class-default
serverfarm MDMDEVICE
policy-map type loadbalance first-match MDMSEG
class class-default
serverfarm MDMSEG
policy-map type loadbalance first-match TRAVLR
class class-default
serverfarm TRAVLR
policy-map multi-match CLIENTS-VIPS
class MDMDEVICE-VIP
loadbalance vip inservice
loadbalance policy MDMDEVICE
loadbalance vip icmp-reply active
class MDMSEG-VIP
loadbalance vip inservice
loadbalance policy MDMSEG
loadbalance vip icmp-reply active
class TRAVLR-VIP
loadbalance vip inservice
loadbalance policy TRAVLR
loadbalance vip icmp-reply active
interface vlan 48
ip address 172.20.48.10 255.255.255.0
access-group input INBOUND
access-group output INBOUND
service-policy input REMOTE_MGMT_ALLOW_POLICY
service-policy input CLIENTS-VIPS
no shutdown
interface vlan 60
ip address 172.20.60.10 255.255.255.0
access-group input INBOUND
access-group output INBOUND
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
ip route 0.0.0.0 0.0.0.0 172.20.48.1 -
Cannot send email from within iPhoto
Using OX X 10.7.5 cannot send email from within iPhoto. I get this error message: "Your email did not go through because the server did not reply."
If I change the preference to use email, everything goes fine but I lose the formatting feature.iPhoto Menu ->
Preferences ->
Accounts ->
Delete and recreate your email settings.
Alternatively, use Apple's Mail for the job. It has Templates too - and more of them. Check out the Stationery... -
Oracle Forms 11gR2 - Cannot deploy locally from within Forms
I cannot deploy locally from within forms. The server is up and running and I can deploy the form by putting the correct URL in the address line of the browser window. When I try to deploy from within forms it comes up with some crazy URL that differs everytime.
This is what the URL should be and this works from the browser:
http://machinename:7002/forms/frmservlet?form=WRD608ADMIN_11g.fmx&userid=&otherparams=useSDI=yes
Here is one of the URLs it came up with when I try to run it from within Forms:
http://localhost:60231/lysVL2VjqT33znjfvLwanktVRxTIc6dEwVeRNXXRmhYU2qjf
Localhost is always there, but the rest varies.
In Forms, I have the Preferences, Runtime set to:
http://machinename:7002/forms/frmservlet
Where machine name is my PC, it is the same for this address as the URL above that works directly from the browser.
So what am I missing?
Thank you in advance.Generally speaking, it is discouraged to manually edit any of the configuration files if they are managed by WLS Console or EM. In this case, default.env is managed by EM. Therefore, changes to the file should be done through EM. If however, you want to alter the file manually, the following is likely the best way to accomplish this:
1. Stop the WLS Admin Server and Node Manager
2. Locate the proper file you wish to edit. By proper I mean, there are several copies of most config files. Most of the config files found in the Oracle Home are actually template files and are not used at runtime. Altering these will not give you the change you want. The default.env you want would be here (assuming Windows)
C:\Oracle\Middleware\user_projects\domains\ClassicDomain\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.2\config
If you are using a "Development" installation type, the above path will reflect AdminServer instead of WLS_FORMS. Remember that Development installations are not for multi-user purposes. Production deployments require the "Deployment" installation type, which can also include the Builders.
Do NOT make any changes yet.
3. Once you find the correct file, create a backup copy. Then open the file for edit (not the backup).
4. Make the desired changes and save.
5. Restart Node Manager and Admin Server if you plan to use them.
For more information about using EM to manage your configuration, refer to the product documentation:
http://docs.oracle.com/cd/E38115_01/doc.111210/e24477/configure.htm#CHDCCGHI -
Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
This is a new problem and was not the case before.Works perfectly fine for me with the latest Reader version (11.0.09).
You write that it worked "before"; before what? An update? Update from what version to what version? -
Making an RFC call from within the VM container
Hi all,
since a long time I am searching for information on how to implement an RFC call from within the VMC. The problem is that we have implemented several (p)functions in ABAP and we need to implement them in JAVA.
Now I am searching for a way how to just call the already existing pfunctions???
Is it possible to read CRM DB tables too?
Thank you in advance
BorisHi Freeto,
This may be due to the Network Failures.
If you have triggered a job then because of the Network fluctuations the system may not respond properly and cannot execute the job.
So, this is the cause for the failure.
Hope you understood.
With Regards,
Ravi Kanth -
Calling a concurrent request from within the trigger
Oracle apps r12.
Calling a concurrent request from within the trigger.
Does it requre apps initilization.
Thanks,
LavanHi,
Whether apps initialization needed or not will depend on followings
1. Trigger is written on which table seeded or custom. In case of seeded tables, there is no need for apps initialization (although oracle does not recommend writing trigger on seeded tables).
2. Triggering Table Update/Insert/Delete event processing is done from apps front end or Backend. In case of front end apps initialization is not required.
Regards,
Saurabh -
RoboHelp 11
When previewing topics from within the project, a script error diplays: 'HHComponent Activator' is undefined.
How do you get rid of this script error?Hi there
Have you tried clicking Help > Updates and applying the service release?
If not, I'd start with that.
Cheers... Rick -
Whenever I use my trackpad, there is a whirring, trebly sound coming from within the computer itself. It happens also when webpages are loaded or programs are compiled, but not when I use the keyboard or when the computer is in disuse. It has become louder over time, and it is obvious that when the computer senses input from the trackpad and must translate it, the sound is produced. Is there any way to reset the firmware or an option on the Settings menu that could perhaps help? I am concerned that it is a symptom of a larger problem. Thanks.
The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up. -
Possibility to abort the execution from within the PreUUT and MainSequence
Hello,
This is probably a TS newbie question that most of you can answer right away!
I'm using the sequential model to develop my test. I cannot figure out how to do terminate the execution from within the PreUUTLoop or MainSequence callback.
In the PreUUT you can manipulate the parameter ContinueTesting to indicate to the process model that you want to stop testing.
For the PreUUTLoop and MainSequence callback this parameter is not available.
I could modify the process model itself to also supply me this parameter for the PreUUTLoop and the MainSequence. (and check for it on return from these callbacks)
But, I was wondering, is there another (maybe even better) way to do this?
Thanks for the help!
noxus.Thanks, that's what I was looking for.
One extra question:
- From the PreUUTLoop callback it is working fine. (immediately stops the execution)
- From the MainSequence callback I still get the popup message "Next UUT" or "Terminate". Can I avoid this popup message and just Terminate the execution? (preferably without modifying the process model)
or, another alternative is that I disable the "Test UUT" entry point and only allow the user to select "Single Pass". Is that possible? Is it possible to disable the "Test UUT" entry point for the sequential process model?
Message Edited by noxus on 02-22-2007 04:17 AM
Maybe you are looking for
-
Imac 24 won't start up after crash!
Last night i was playing world of warcraft and also running itunes and firefox, and out of the blue my imac crashed into a white screen. I immediately turned it off and back on but it doesn't get past the white apple screen, after a while the screen
-
Keywords not working correctly
I've spent a couple of days adding keywords to my project in FCP X but I'm wondering whether it's been a waste of time because now, the wrong clips are appearing when I click a keyword collection in the browser. The keywords are to do with training a
-
Hi everybody, I have noticed that the messages that the SRM send to the authorizators include a feature for authorize via email. How does it work ? I get a error message because the wf-batch users doesnt have a valid email account, so I put a valid e
-
I heard about the possibilty of decompiling the java code and getting back the source code, is this flaw specific to java or is it common among all programming langauges? how is it possible to protect the source code? and how expensive is the solutio
-
I have the "Official" apps for Twitter and Facebook installed on my iPhone. Whenever a friend tweets that they've posted new photos on Facebook, and includes link like "fb.me/.....", clicking on the link opens Safari instead of the Facebook app, and