Cannot update E4200 firmware

Hi,
Here are my infos (French):
Nom du modèle : Linksys E4200
Numéro de modèle : E4200
Numéro de série : 01C10C17152754
Version du microcode (firmware) : 1.0.03 build 14
OS : Windows 8
Version du logiciel : 1.4.12284.0
Type de connexion (réseau étendu) : DHCP
Adresse IP (réseau local) : 192.168.0.1
Adresse IP (réseau étendu) : 192.168.1.101
Adresse IP de l'ordinateur : 192.168.0.135
I downloaded this file :
http://homedownloads.cisco.com/downloads/firmware/1224665244042/FW_E4200_1.0.05.007_US_20120823_code...
I upgraded it, I typed 192, etc. in firefox, when to the maintenance tab, put the dowloaded file in "new firmware location" and clicked "update". It said: "you put a wrong file".
Curiously, this is written in the same tab : Current Firmware Version 6.0.0 Build 100906 Rel.43560
Thanks!

I find it odd because you are actually using the correct file which is bin. Try to delete and redownload it again from the website and try the upgrade again. If that will not work, reset the router and unplug/replug it after that. If you still get the same error, try a different browser and another computer if ever it still would fail using the windows 8 computer.

Similar Messages

Cannot update to Firmware version 4.1.108.32627 on ix4-300d

Just bought an ix4-300d with 4-3Tb drives. I cannot update Firmware to the latest version. After uploading to the NAS, when I click 'Apply' or 'Apply all pending updates", I see a message that says "The update file is being decompressed". After several seconds, I then receive dialog box that says, "Error – The software could not be updated."
Any ideas what the issue could be? Are there any log files to look at?
Current Version: 4.1.102.29716
Upgrade to: 4.1.108.32627

Hello dcsantis
Check the event log for any abnormal storage alerts such as degraded storage, recoverable errors, missing drive alerts, etc. Those sort of alerts could contribute to the firmware update issue.
Some basic steps to try for the issue:
Re-download the update file again and check the md5 checksum from the download page. If the checksum fails, try downloading from a different browser or computer and check it again.
Try uploading and applying the file using a different browser or computer.
Try re-seating all disks with the unit off, then try uploading and applying the update file again.
Try swapping disks 1 and 4 to opposite bays, then try uploading and applying the file again after booting.
LenovoEMC support should be contacted to create an incident if the above steps do not work.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Cannot update N73 firmware

Hi!
I've just installed the NSU (version 1.2.2.0en) but I cannot update my phone's firmware. The software displays a "No software updates avaliable for your phone" message but I know that the N73 have a new firmware version v 3.0638.0.0.1.
Do anybody knows how to help me (All my phone details are on my signature) ?
(Sorry my bad english!)
Best Regards.
Danilo
Nokia N73 (01)
V 2.0628.0.0.3
RM-133
0539296 CUST.TRX APAC (Deep Plum)
Edited to remove IMEIMessage Edited by m_shaharizai on 19-Dec-2006
06:12 PM

this doesnt have relevance to your post but you should remove your imei number from your siggy
Blackberry Bold

I cannot update TCapsule firmware: error 6727

I cannot update Time Capsule firmware. It says error 6727.
Thank you for help

Are you trying to update over wireless?
https://discussions.apple.com/message/17476181#17476181
I recommend you reset the TC if you continue to have trouble.. Make sure the TC is directly connected to the router by ethernet as well and try again.
BTW updating to 7.6.3 could be a big mistake. Some upgrades are really downgrades and best ignored.

Cannot update to Firmware v7.5.1 and cannot connect wirelessly

I've updated the Apple utility to v5.5.1, but cannot detect Firmware v7.5.1 in AirPort Utility. Also, since yesterday, wireless connection has not been working. I have tried hard reset. The signal light on the base station is solid green and I have no problem with wire connection. Just don't have wireless connection.

As I understand your problem, your Windows computer is "connected" to your wireless network, but you can't load any web pages and from all appearances, it has no Internet connection unless you hard-wire it to your Extreme. Correct?
Try the following: Power down (unplug) your modem, your Airport Extreme, your computers and whatever else might be connected to your network. Make sure they're disconnected from power and really off. Wait a few moments.
Then, in the following order,
Power up the modem (plug it in). Wait a few moments for it to complete its startup sequence.
Power up the Extreme. Wait again.
Power up your Windows computer, the one using a wireless connection.
Does that change anything?

IPod cannot update because "firmware file" cannot be found

We have a video iPod with color--30 GB. When I connect to iTunes to update my iPod, it says a newer version of iPod software is available. When I click okay to download update, an error message comes up saying "The iPod "Rachel" could not be updated because the firmware file could not be found. Any suggestions on how to fix this error?

See if anything here helps: What to do if iPod can't be updated because the firmware file was corrupt or not found

HT201210 cannot update software firmware not compatable phone is iphone 4

I am trying to update the software on my iphone 4 to newest software to activate my phone as a wi-fi hotspot. I downloaded the software and updated on itunes and got the error prompt firmware not compatable update failed? What happened????

You have to delete the corrupt back-up so iTunes can at least back-up the current data on the iPhone and then restore it. Search these forums, there a several good posts on how to delete the corrupt back-up.

Cannot update mini displayport to vga adapter firmware 1.0

How come i cannot update the firmware,It says "The Updater could not find a Mini DisplayPort to Vga Adapter to update even though the adapter is already connected to my Philips HDTV.At first, the image in my philips hdtv is not clear as my secondary display plus my primary display which is my macbook aluminum has a black portion on the left and right of the screen about an inch wide so i did a little search on the net and it says i need to update the firmware so i downloaded it but i cant update it so im stuck at a crappy ,vivid image or display on my philips hdtv and a small image or display in my macbook everytime my display port is connected.I think my Philips HDTV is compatible with the display port because the image in my macbook can be mirrored but as i said the image is not clear really blurry but i maybe wrong so my second question is how do i know my Philips HDTV is compatible with my macbook as a secondary display?

kmac1036 wrote:
1. I don't believe you can have anything hooked up to the adapter. all you need is the adapter plugged in without screen.
2. how old is the adapter? this update is about a year old, so chances are your adapter has the updated & probably newer firmware installed.
I got the same error with mine back then as it already had the update when I bought it, even tho I did so BEFORE apple posted the firmware, so units leaving the factory already had the updates.
I agree with kmac1036, having recently run the update (or rather attempted to). You can't have a monitor connected to the adapter. It's also likely that your adapter is the newer version, even though the software download is being prompted. I had read on some tech blog that said the model # on the newer adapter has a -1 after it to indicate it's the revision with the updated firmware.

Update the firmware for RTX 4088

I got my phone today and tried to update the latest firmware. I had some calls succesfully already and there is no problem with calling, but I still cannot update the firmware and it showed me that "No connection to update server". Is there any setthing which I would need to activate before doing this? version is 0138
Is there anyone who had this experience and would share?
Thanks,

I'm having exactly the same problem, though my firmware is 0141 (not sure if this is the latest). When I select the 'Firmware update' option, I'm immediately given that "No connection to update server" message (not sure if it even tries to connect to it, as this all happens immediately), and no further options (Latest Firmware / Current Firmware / All Firmware vers.") are presented. I tried to reset the base station several times, to no avail.

Cannot update to Verizon iPhone firmware 4.2.10

I cannot upgrade my Verizon iPhone from 4.2.8 to 4.2.10 via Windows 7 64-bit using iTunes 10.4. I end up getting error 3194. I've rebooted, turned off the Windows Firewall, unplugged all USB devices (including keyboard and mouse) and no go.
I put it in Recovery mode and got the same error.
I have a MacBook Pro with OS X 10.6.8 on it and a fresh install of iTunes 10.4 (had wiped it according to the Apple KB article and installed it newly). And when I try it there I get the phone is "not eligible" for an update. I thought Sophos A/V might be in the way and closed it, no go, and I also have no other USB devices attached, etc. etc.
Of side note, my latest generation iPod touch was updating fine via Windows 7 and now stopped after 4.3.3 and I cannot go to firmware 4.3.5 now.
Also, I had a similar issue with my same iPhone 4 trying to go from 4.2.6 to 4.2.8. I ended up going into the Apple Store, they did put it in Recovery mode and connected it to a white MacBook and it updated the firmware just fine. (By the way, they were VERY helpful at the store and handled me very quickly and were very nice and explained technical details to me when I asked).
Why I can't update the firmware on my own devices at home is a mystery to me. What do I do? Wait for iOS 5?

Lawrence, that did it! I had added in that line earlier on because I had gotten that as a solution to try while googling. So I deleted the gs.apple.com line from the hosts file, rebooted and tried again and it worked! I now have 4.2.10!
I had done the same thing on my Windows 7 computer, and it is removed now, too.
So to recap:
- removed the gs.apple.com line from /etc/hosts on my MacBook
- turned off On Access scanning for viruses in Sophos
- turned off Airport/WiFi
- used my Ethernet/LAN connection to my Comcast modem (no other router inbetween)
- and not sure if it mattered, but a clean install of iTunes

HT201210 trying to update my iPhone 4 to latest 5x ios and getting a "cannot update due to firmware not compatible

Trying to update iPhone 4 to the latest iOS 5, the error "cannot update due to incompatible firmware" prevents install. Any idea on where to find firmware update or resolve?

The correct way to upgrade the firmware is to first assure that you have the latest version of iTunes, then connect the phone to your computer. Click on the name of the phone in iTunes, then "Check for Updates" on the iPhone Summary screen. It should tell you there is a new version, and ask if you want to upgrade to it. If you are using any other method, or you downloaded a firmware file from a web site, you are asking for trouble.
The only thing you might want to do is to delete any .ipsw files on your computer before doing the above, in the unlikely event that the update file was corrupted during download.

TS3694 I cannot update my iPhone 3g to iOS 4.2.1 because of iTunes error 1015 ;error during restoring of firmware mode.

I cannot update my iPhone 3g to iOS 4.2.1 because of iTunes error 1015 ;error during restoring of firmware mode.

Was you iPhone jailbroken?

N95 cannot update firmware in Australia?

Hi,
I have a Nokia N95 purchased on 7th August 2008 from Telstra Australia on a 24 mth contract. Firmware is V10.2.006, I would like to update the firmware to the latest version to hopefully iron out a few bugs and generally speed this thing up. However, when trying to update via a PC/USB through the Nokia updater application I keep receiving the message that my firmware is already up to date. It quite obviously is not, research has indiacted it is V21 or later. Can somebody please explain why this service is not available to me?
Thanks all,
Smarteee.
Solved!
Go to Solution.

13-Aug-2008 10:01 AM
smarteee wrote:
Although a 3rd option has presented itself since my original post and is becoming more attractive - Get my phone unlocked/wiped or hack the phone and change the product code.
That particular operation cannot be discussed on these forums since it voids your warranty.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Wrt160n v2 cannot ping after firmware update WRT160Nv2_v2.0.03.007_US_code.bin

Router: WRT160N V2
I updated the firmware because I was tired of getting "page does not exist" errors. But after the firmware update I have not been able to ping the router using 192.168.1.1.
The Power icon on the router flashes.
When connected to the DSL modem the modem will connect to the internet and the internet light on the router will come on.
When the PC is connected to the router the router port number that you plung into icon will light up.
Pinging 192.168.1.1 will timeout
So far I have tried:
Hold the reset button down for 5 seconds (then another suggestion was 30 seconds, and then another suggestion for a full minute)
(I never see any kind of response from the router as a result from holding down the reset button.)
Unplug router for a full minute
Unplug modem
Shutdown PC
Plug modem back in
(wait until the lights are on the modem become active.)
Connect the router into the modem.
Plug the router into the power supply
(the modem will connect to the internet provider)
(the router will display the following icons: power symbol (flashing), internet symbol, and port number connected to the PC.)
Ping 192.168.1.1 (timeout)
IPConfig /release (and /renew...which errors out)
I have had this router for a couple of months and I am concerned that I will not be able to take it back. If the reset button has no affect and I cannot communicate with it I am concerned that I am in for some bad news.

Had you tried upgrading the router's firmware using wireless computer ? You should use the wired computer to upgrade the firmware...
Now as the Power Light on the router is flashing you can try steps below..
- hold down the reset button for about 30 seconds, then unplug the device, while you are still holding down the reset button.
- leave unplugged for about 5 seconds, while you are still holding down the reset button.
- plug the unit back in, while you are still holding down the reset button.
- after about 5 seconds, let go off the reset button.
Now, check if the power light is solid now...

Cannot Update to 1.15 Firmware!! Help?

I have an iPod touch that is on 1.1.4 firmware right now. I remember trying to update it earlier this year, but every time I try to do so, it tells me that it cannot update my iPod. It goes through a few loading steps, and then it looks like it is on the one before actually updating my ipod, and then stops, gives me the error message, and discontinues the process. At the end of the message, it always has the error number of (1062.) Any help? Should I just wipe the thing entirely? Ive had to do that before... and I put 1.1.3 back on perfectly fine without any errors. Thanks!

I prefer to download and install the firmware separately. After I download the firmware, I copy the file and rename with a ZIP extension,then open it. If it opens, I'm happier the install will succeed.
Sometimes people publish the firmware on the net because of issues with Apple's servers, so you could try to download a fresh copy?
I never use the "download and install" option as the Apple servers drop out often and you could end up with a corrupted file. Why doesn't Apple have checkpoints in their file to allow the download to resume from the last dropout instead of going to the beginning (my rant).

Cannot update E4200 firmware

Similar Messages

Maybe you are looking for