Cannot update Flash due to missing plugin "application/getplusplusadobe16291"

I have the current version of Firefox and am trying to update Flash Player. The top of the Adobe download page shows missing plugins required to view all the content. When I try to install the missing plugins, they are listed as unknown with the above text. When I try to manually install and open gp.xpi it says it already exists and I say to replace and try to open the download and Adobe Reader says it cannot open because it is unsupported or has been damaged.

That plugin is not needed, you can install Flash by using the manual installers, for details see http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

Similar Messages

Cannot update flash,i get to retrieving application box and nothing happens

only single instance of this application can install

There are two different versions of Flash for Windows, the '''''ActiveX''''' version for IE and the '''Plugin''' version used by Firefox and most other browsers.
Uninstall your current Flash Player Plugin program, then:
1.Download the Flash Plugin version setup file from here: 
[http://download.macromedia.com/pub/flashplayer/current/install_flash_player_32bit.exe Adobe Flash - 32-bit Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

How do I update my InDesign CS3 plugins? I received a document from a colleague created in CS3 and I can't open it due to missing plugins.

How do I update my InDesign CS3 plugins? I received a document from a colleague created in CS3 and I can't open it due to missing plugins.

The error message is below. When I get info on the file it says it's a CS3 file.

Asset values cannot be displayed due to missing text

Hi guru's,
I am facing the problem while i am displaying the asset values,i am able to create asset through as91 but when i go for awo1n system showing error" Asset values cannot be displayed due to missing"
help would be appreciated.
Thanks
Ravi

Hi Vyas,
I am getting error like below.
Asset values cannot be displayed due to missing texts
Message no. AY363
Diagnosis
The values of the selected asset cannot be displayed. Text elements are missing in logon language EN.
System response
Processing is terminated.
Procedure
First, check if you are logged on in a language that is maintained for this system.
This error can also occur, if the company code of the selected asset is assigned to a chart of depreciation that is not fully maintained.
In many cases, the problem can be corrected by re-importing the missing texts from the reference chart of depreciation. You can do this using repair program RACORR14. Refer to SAP note 0773639 for more information.
Thanks
Ravi

Trying to open a saved down idml file in CS4. Updated CS4 but still missing plugins?

I'm trying to open both an inx file as well as an idml file exported from CS5. I have CS4 and it is updated as far as it will go, but it still says I'm missing plugins. And a lot too... 19 of them! Does anyone know how I can get these plugins? It's requesting them for both the inx file and the idml file.

That is indicative of someone simply renaming an INDD file to IDML. In other words, that file wasn’t EXPORTED from anything. It was saved with a different extension or renamed after saving.
Bob

Cannot update flash 15 on Mac. Password window is blank

Hello All,
I am trying to update flash on my mac (OS 10.9.5 with Safari V 7.1). The window where I would normally enter my username/password has no text and is unresponsive (see screenshot). I cannot enter my information. I tried running the uninstaller as well, and ran into the same issue. Any ideas? I'm a linux person, and relatively new to mac. I'm not sure if this an issue with Adobe or with mac.

I haven't seen this before. My primarily machine is the same config. This prompt is thrown by the operating system, which makes it really odd.
If you haven't tried it, reboot your machine and run the installer again.
If that doesn't work, try resetting the PRAM on your mac:
OS X Mavericks: Reset your computer’s PRAM
Let me know how it goes.

Cannot launch Flash CS6 after installation with Application manager

I have recently installed the Flash CS6 trial via the application manager.
After installation I was able to run the application normally. But, the next day, obviously after restart, there is no icon inside Application manager to launh it. It only shows "installed".
When I am trying to launch the application by double clicking on it's icon in the folder where it is installed, I receive the error:
"Windows cannot access the specified device or path or file. You may not have the appropriate permissions to access the item."
How can I resolve this?
Thanks

>Right click start menu shortcut and clock properties
>find out file location
>one of the folders it's in is locked and needs permission
>keep searching until you find application
>open it
>now can install
Anyway to fix any of this?
Is our computers messed up or something?

Cannot update Flash player on Mavericks or Yosemite?

I have tried to update Flash Player on my MacBook Pro for both Mavericks and Yosemite, but it always gives me this message:
How can I successfully install flash player?

As I have stated previously, this does not work. There is no tool to uncompress the plugin inside the bundle. Installation fails on Yosemite every time, no matter what installer is used.
Please read this thread to examine my findings.

Cannot update iTunes due to old Bonjour

I cannot update my iTunes.
When running the install, I fail to uninstall the old Bonjour(not Bonjour Printing), and the Bonjour version is 2.0.1.2.
I tried to uninstall it with the windows' uninstaller, and the uninstaller report that the pathway of the .msi is not availible, which is: C:\Users\ADMINI~1\AppData\Local\Temp\IXP310.TMP\ . I never touch these type of file, the folder or file really not there.
How can I uninstall the Bonjour, so I can get my iTunes update successfully?

These sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any BonJour entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly this time?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Cannot update ipod due to files that are in use by another application

Uploaded iTunes version 7 onto my PC on Friday. Ever since my fifth generation video (30GB) ipod cannot be either updated with version 1.2 software, syncronised or restored due to the error message "The ipod cannot be updated becuase it contains files that are in use by another application".
Not sure the issue is related to the itunes upgrade but it is a strange coincidence.
Also having a problem becuase my pc runs outlook 2002 which is not compatible with itunes 7 and my calender cannot be syncronised. Don't know whether the two issues are related.

Kudos to Randy. Thanks a lot; this worked for me. I simply opened itunes (and minimized it) with my ipod connected, opened "My Computer," right-clicked "IPOD" and ejected it. As soon as the icon in My Computer showed that it was ejected I quickly maximized itunes, clicked IPOD, and clicked the update button. Wah lah! iPod updated. Hope that helps the rest of you out there with this problem! Thanks again!
Windows XP

Firefox 34 unstable. Plugins blocked, Flash not working, cannot update Flash. Cannot update FLASH, as Adobe not offering update.

Repeated crashes with latest Firefox Version 34, running on Win XP SP3. Older Firefox version worked flawlessly. Update was a bad idea, as "security" fixes now block Flash from working. Attempt to update via Adobe cause further problems. Repeated crashes of internal program "plugin-container.exe". Poor product now, fails to provide the basic functionality - ie. viewing Flash video - that most web-brower users require. This solution was "solved" and worked fine, but stupid decisions appear to have been taken to block Flash, rather than fix the security vulnerabilites. Can't the leaky Adobe code just be "sandboxed" so code execution outside of a defined memory area is made impossible? About 1 billion global users rely on Flash, as most
video delivery websites use it. Just "blocking" the plugin is an arrogant goof's solution to the security problem.
But Adobe seems to have become obnoxious about not allowing or offering upgrades or fixes of Flash.
Recommended solution seems to be to download and install Dolphin browser, which is built to at least include Flash support internally.
Question: <nowiki>**********</nowiki>
Is there a recommended way to get the Flash plugin installed and working correctly in a recent version of Firefox???
Step by step instructions should be provided.
<nowiki>********************</nowiki>
It is almost 2015, and software development seems to be going retrograde, with "enhancements" simply crashing existing systems, and causing more problems than are solved. No wonder everyone is just disabling upgrades once they get a working
system. I deeply regret upgrading to Firefox Ver. 34, as it does not run Flash video correctly now.

*** SOLVED *** !!!
I was having strange problems re. Youtube+Flash website.
Turned out to be some hard-coded ip-redirection in my "hosts" file.
I found it by searching and reading all the "youtube" related Mozilla FIrefox support forums. Thanx for this forum, guys. It is a good resource. And I apologize for my cranky, petulant initial comment. It was inappropriate. The error was mine completely.
Problem was an old hard-coded fix that I put into my HOSTS file, on my Windows XP, SP3 machine. Specifically, I had experienced hang issues with a site called "i.ytimg.com", which I believe is the static cache for Google/Youtube stuff. I tracked this error down to failures of security certificates, but confirmed my security cert store was isometric between my machine cluster (they were all the damn same!)
So, I had put two lines in the HOSTS file, to hard-code an IP address so that Google-youtube pages would not hang up waiting for "i.ytimg.com"
Well, of course, Google/Youtube is now using different locations, or akami servers or some damn thing...
The fix just involved removing these two hard-coded lines from my HOSTS file. I just commented the old fix out, and now everything works.
<pre>
# --- two lines added to fix i.ytimg.com hang problem
# 74.125.162.39 static.cache.l.google.com s.ytimg.com
# 74.125.162.39 static.cache.l.google.com i.ytimg.com
</pre>
(The # symbol is used to make a comment in hosts file... )
On Windows XP, XP3, the "hosts" file is typically located in:
C:\WINDOWS\system32\drivers\etc\hosts
If you are having goofy problems with some youtube/google webpages
not rendering, or generating SSL (bad_certificate) errors, check your
"hosts" file, and ensure no ip redirection has been slotted in there
from a while back.
Hope this helps others...
- Mark Langdon, GEMESYS Ltd.

Cannot update Flash Player plugin

[http://i72.photobucket.com/albums/i184/pumkin54/Forum%20post%20pics/flash_player.jpg PICTURE of problem, in case you don't feel like reading the step-by-step]
# I have the latest Firefox 13.0.1. I just updated it 10 minutes ago.
# I go to Add-ons Manager > Plugins > Check to see if your plugins are up to date.
# It tells me I have Shockwave Flash 11.3 r300, an outdated version. I click the yellow Update button.
# This takes me to http://get.adobe.com/flashplayer/. It says, "Your system: Windows 64-bit , English, Firefox." This is correct.
# I download the Flash Player exe.
# I close Firefox.
# I run the Flash Player exe.
# In the dialog box that pops up, I select "Let Adobe automatically install updates."
# The Flash Player exe then downloads and installs Adobe Flash Player 11.
# I receive a notice at the end of installation, "Installation Complete" with a little green check mark.
# I restart Firefox.
# That Adobe page at http://get.adobe.com/flashplayer/completion/aih/?exitcode=0 automatically opens. It says, "Installation Successful. You are now running Adobe Flash Player"
# I go to Add-ons Manager > Plugins > Check to see if your plugins are up to date.
# It tells me I have Shockwave Flash 11.3 r300, an outdated version.

I went to the link cor-el posted and found a Flash Player uninstaller. I completely uninstalled Flash and then reinstalled it. Ta da, version 11.3.300.265!
Thanks a lot, guys, for your help! :)

Cannot update Flash Player from version 14

I'm unable of updating or removing Flash Player 14 from my computer. I have installed version 16 aswell, but swf files still run in version 14. In Flash Professional, I am unable to export HTML wrappers to other flash versions than 14.
I cannot find it at the list of installed applications either. This is really frustrating as I suspect my applications would perform better in newer versions.

Local swf files use the standalone player (Projected), not the Flash Player plugin.
You can download the latest Projector from https://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you need to make the file association manually.

Cannot install driver due to missing files - BlockSysUser and hpzpnp.ice_suffix

I have just purchased a new Dell with Windows 7 64-bit and am trying to install the driver for my oldie-but-goodie OfficeJet 6310. I am having the same problem with BlockSysUser as has appeared numerous times, and have tried all of the posted solutions. I downloaded the driver from the website.
I can get past the BlockSysUser issue by creating another folder called ".SourcePath.setup" and copying the BlockSysUser file that resides in Setup. However, I then get a missing file hpzpnp.ice_suffix.exe, which I cannot find in any of the other folders. It seems to be looking for this also in ".SourcePath.setup".
I can install the printer using Windows, but then I don't have the other good stuff.
This problem seems to have been around for YEARS! Why hasn't it been resolved through driver updates?
Help!

Hi DForm,
It's okay regarding the log file, I did some more research for you and found these steps:
Turn off Anti-Virus (McAffee in this case). How to Disable McAfee Antivirus.
Disabled the firewall. Turn Windows Firewall on or off.
Perform a L4 uninstall. (a) On the keyboard, hit the Windows and "R" key, then type %temp% and hit enter. b) Locate the correct folder starting with "7z" (the correct folder contains "Util" and "CCC" folders). c) Open folder "Util". d) Open folder "CCC". e) Please run the L4uninstall.bat. f) When the uninstall has completed, restart the computer).
Disabled startup and non MS services. Disable startup items and non-Microsoft services.
Restart the computer.
Run setup as admin. How do I run an application once with a full administrator access token.
Hope this solves the issue, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

[SOLVED]C compiler cannot create executables DUE TO MISSING DEV. PACKS

Hi there, I was trying to build "lib32-libpcap" from AUR using yaourt when the gcc(?) reported an error as following:
==> Starting build()...
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for gcc... gcc -m32
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.
==> ERROR: A failure occurred in build().
Aborting...
The content of the "config.log" file:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ ./configure --prefix=/usr --libdir=/usr/lib32 --enable-ipv6
## Platform. ##
hostname = mzws
uname -m = x86_64
uname -r = 3.2.8-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/local/sbin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/bin/core_perl
## Core tests. ##
configure:1794: checking build system type
configure:1812: result: x86_64-unknown-linux-gnu
configure:1834: checking host system type
configure:1849: result: x86_64-unknown-linux-gnu
configure:1871: checking target system type
configure:1886: result: x86_64-unknown-linux-gnu
configure:2036: checking for gcc
configure:2063: result: gcc -m32
configure:2301: checking for C compiler version
configure:2308: gcc -m32 --version >&5
gcc (GCC) 4.6.2 20120120 (prerelease)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2311: $? = 0
configure:2318: gcc -m32 -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/src/gcc-4.6-20120120/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --enable-libstdcxx-time --enable-gnu-unique-object --enable-linker-build-id --with-ppl --enable-cloog-backend=isl --enable-lto --enable-gold --enable-ld=default --enable-plugin --with-plugin-ld=ld.gold --disable-multilib --disable-libssp --enable-checking=release
Thread model: posix
gcc version 4.6.2 20120120 (prerelease) (GCC)
configure:2321: $? = 0
configure:2328: gcc -m32 -V >&5
gcc: error: unrecognized option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:2331: $? = 1
configure:2354: checking for C compiler default output file name
configure:2381: gcc -m32 -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu conftest.c >&5
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/libgcc.a when searching for -lgcc
/usr/bin/ld: cannot find -lgcc
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/../../../libgcc_s.so when searching for -lgcc_s
/usr/bin/ld: skipping incompatible /usr/lib/libgcc_s.so when searching for -lgcc_s
/usr/bin/ld: cannot find -lgcc_s
collect2: ld returned 1 exit status
configure:2384: $? = 1
configure:2422: result:
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:2429: error: C compiler cannot create executables
See `config.log' for more details.
## Cache variables. ##
ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_env_CC_set=set
ac_cv_env_CC_value='gcc -m32'
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=x86_64-unknown-linux-gnu
ac_cv_prog_ac_ct_CC='gcc -m32'
ac_cv_target=x86_64-unknown-linux-gnu
## Output variables. ##
ADDLARCHIVEOBJS=''
ADDLOBJS=''
BT_SRC=''
CAN_SRC=''
CC='gcc -m32'
CFLAGS='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
CPP=''
CPPFLAGS=''
DEFS=''
DYEXT=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
GREP=''
HAVE_LINUX_TPACKET_AUXDATA=''
INSTALL_DATA=''
INSTALL_PROGRAM=''
INSTALL_SCRIPT=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu'
LIBOBJS=''
LIBS=''
LTLIBOBJS=''
MAN_FILE_FORMATS=''
MAN_MISC_INFO=''
OBJEXT=''
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
PCAP_SUPPORT_BT=''
PCAP_SUPPORT_CAN=''
PCAP_SUPPORT_USB=''
RANLIB=''
SHELL='/bin/sh'
SHLICC2=''
SSRC=''
USB_SRC=''
V_CCOPT='-O'
V_DEFS=''
V_FINDALLDEVS=''
V_INCLS=''
V_LEX=''
V_PCAP=''
V_RPATH_OPT=''
V_SHLIB_CMD=''
V_SHLIB_OPT=''
V_SONAME_OPT=''
V_YACC=''
ac_ct_CC='gcc -m32'
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias=''
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='unknown'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE}'
dvidir='${docdir}'
exec_prefix='NONE'
host='x86_64-unknown-linux-gnu'
host_alias=''
host_cpu='x86_64'
host_os='linux-gnu'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
libdir='/usr/lib32'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target='x86_64-unknown-linux-gnu'
target_alias=''
target_cpu='x86_64'
target_os='linux-gnu'
target_vendor='unknown'
## confdefs.h. ##
#define PACKAGE_NAME ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define PACKAGE_STRING ""
#define PACKAGE_BUGREPORT ""
configure: exit 77
and the makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu"
#-- Make Flags: change this for DistCC/SMP systems
#MAKEFLAGS="-j2"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(fakeroot !distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs libtool emptydirs zipman purge !upx)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
OPTIONS=(strip docs libtool emptydirs zipman purge !upx)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
Am running a up-to-date x64 Arch with [multilib] enabled; perhaps it's a silly mistake I made somewhere but I'm no dev and so cannot figure out what went wrong in the config.log....please help with your kindness and thanks in advance!
Last edited by karbon (2012-03-10 04:28:58)

Thanks for your replies:)
Allan wrote:Are you really up-to-date? gcc-4.6.3 was put in [core] four days ago but you still seem to have 4.6.2.
Well...at least as up-to-date as on March 2nd(when I did last system-wide upgrade); trying to update system tonight to see whether this works.
stronnag wrote:If you have multilib and testing enabled, you also need multilib-testing, otherwise (as I know from bitter experience), you get these hard to track down errors.
Nope I didn't enable [testing]; I've discovered some packages in [multilib], namely gcc-multilib or something similar(with the -multilib subfix) and some of these packages belong to the group "multilib-devel". Is installing these packages a must for compiling 32-bit packages?

Cannot update Flash due to missing plugin "application/getplusplusadobe16291"

Similar Messages

Maybe you are looking for