Cannot Update my Nano with the Latest Software 1.1.3
Everytime I plug my Nano into my computer via USB chord, the iTunes program asks if I want to update my Nano with the latest software to Download and Install. I decide to download and install, then once the software has been downloaded an error message appears, "There was a problem downloading the iPod Software for the iPod. An Uunkown error occurred (-48). Make sure your network settings are correct and your network connection is active, or try again later." I always run an iPod/Network Diagnostics and it always show green (no errors) on the system. What can I do to update this latest software update?
I am having the same problem with a mac (10.4.9), itunes (7.3.2 (6)), DSL connection. I have reloaded the nano with the original 1.1.1 software, toggled the lock on top of nano, changed Mac timezone to PDT, rebooted nano, unplugged all other USB devices except keyboard and mouse. The nano is now empty from restoring to original factory settings.
The 1.1.3 software download unloads the whole 20 MB then gives the (-48) error message at the very end where I expect the 1.1.3 load to begin. I have tried several links to the update - keep getting the same error about 9x times now.
Thank you very much, Bob
Similar Messages
-
I updated my iPhone 4 with the latest software. When I did this my ringtones that I bought disappeared. I looked for them in my phone and on my computers iTunes and cannot find them. How do I get them back?
Open itunes, connect iphone, do not sync, click File>Transfer Purchases
You can redownload some purchases in some countries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I have just updated my mac with the latest software the brightness now docent work on the f5 f6 keys
I have just updated with the latest software 7.1.1 the f5 f6 buttons now dont work to brighten the screen, it works if I use display in system prefrences
Try a SMC reset:
http://support.apple.com/kb/ht3964
What are your settings in System Preferences>Displays>Display?
Try putting your finger over the light sensor. What happens with the back lighting?
Ciao. -
I kept all my iPhones after I upgrading to the latest one each time my 2 year contract was up so I have an iPhone 3GS, iPhone 4 & iPhone 4S. I actually still use all 3 phones for different purposes. My iphone 3gs is not activated, but I still use it for apps among other things when connected to wifi. My iphone 4 & 4s are both activated with 2 saparete phone numbers, but I have all 3 devices on the same iTunes account. I never noticed this to be a problem until just recently when I was thinking about selling one of my iphones since I'm now due to upgrade again to the iPhone 5. Well my problem is that when the latest iphone software update came available I noticed that all 3 iPhones had a notification letting me know that there was a new update available & I didn't want to update my iphone 4 & 4S until I had a recent back-up on my pc just incase anything went wrong like once before. Referring to the last time I updated my iphone 4s for some reason right in the middle of the update it lost connection. So I had to restore my entire phone from scratch & because I didn't check to make sure that had a recent back up right before I updated I ended up losing a lot of important information. So anyway since my iphone 3GS I knew had a recent back up & plus it doesn't have a lot of important information stored on it I chose to go ahead & update it first. Then later on when I went to update my other two iPhones I noticed the notification that was there before on all my phones to let me know the update was available was now gone & it would not give me the option to update either of my other two phones. I don't know if this is true or not, but I was later told that Apple will only let you download the free update software on only one device on each iTunes account & since I have all 3 devices on one itunes account I could only choose to update one. I didn't know this beforehand so I used the update on my 3GS which I barely use except to play with on wifi & now my other two iPhones which are the main ones I use are both activated now function very slow & constantly crash. Also if I was to choose to sale one of the iPhones without the latest software update on it does that mean that the new owner will not be able to get the latest update meaning the phone would be out of date without having that latest software installed? If anyone knows how to help me fix this or give some advice I would really appreciate!!
That's utter non-sense.
Just connect your 4 & 4S, iTunes running, & hit the "Check for Updates" button, or you can update directly on the phones(if running iOS 5.0 or higher): Settings>General>Software Update.
iOS 6.1.3 is the current iOS version for both phones. -
How to update my Nano to the latest software?
I have a generation 6 Nano. When I just plugged it into my laptop, I got a message asking me to download the latest version of software into it. By the time I logged into my Apple ID, the instructions were gone. Can anyone give me an idea of how to get back to those instructions?
Click here and follow the instructions.
(115144) -
HT201442 3004 error when updating my iPad with the latest software
hi Guys as heading suggests I have a 3004 error after loading my iPad with an update.
My iPad screen shows the itunes icon with a image of the plug in cable just underneath it.
I have turned the iPad off and on, I have turned the PC where my iTunes is off and on, I have check for further updates and I have ran Fix it for Windows 7 and I still cant get itunes and my iPad to align as being completed and up to date.
Any suggestions?Check here for the cause of the 3004 error and how to deal with it:
http://support.apple.com/kb/TS3694#communication -
I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
Please suggest a solution or @Apple please get a software release which can remove this bug .We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
-
My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"...I literally bought some of these songs yesterday on my iPhone and now I can't sync them to my iPad. What is this issue? Usually I would just have to plug either device into iTunes and everything would sync, now nothing new syncs.
On your iPad tap Settings > Store
Switch Books off then back on then reset your iPad.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears. -
I have recently updated my iTunes to the latest software. Since then my iphone will not sync with itunes, it doesn't show up in my computer any more either. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?
http://support.apple.com/kb/TS1538
-
I have an IPhone 4 which I just updated with the latest software, which put in it in Recovery Mode. It has the picture of the plug with ITunes, I downloaded it now its saying its in Recovery Mode, how do I save all of my previous data without Restoring?
I updated the phone before backing it up on iTunes, now the update wanted me to connect the phone with iTunes and it says the phones in recovery mode and it must be restored before its used with iTunes. I go to click restore and it says it will reset it to factory default and I'll lose all my current data. I have all my sons pictures and videos along with this notes. I can't lose all of this data! Please help!You have to restore the iPod, no ifs, ands, or buts...
After iOS is installed you will be asked if you what to set it up as a new iPod or if you want to restore from a backup.
If you have a good backup you can restore that and you're good to go.
If you don't have a good backup, then you end up with a "clean" iPod.... -
After updating with the latest software, when trying to edit a photo, it disappears (black screen) or screen is full of lines. If I blindly crop or edit the photo, when I exit edit mode, those changes have been made, but obviously this is unacceptable. Is this a bug with the latest software update?
There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
It will not update. Just sits in my App Store and freezes . I have a iPhone 4S with the latest software.
If it's freezing when you try to update apps, try force-closing the App Store app. From your home screen, double-tap the home button, locate App Store in the list on the bottom, tap an hold it until it wiggles, tap to close it, tap the home button again. Try updating again...any difference?
-
After I put in my password, the icon briefl displays then disappears. I am up to date with the latest software. I bought the 3GS 2 days agao and at that time it was no problem for me to download apps but since I updated my software I have been having this issue.
App store seems down a.t.m. (USA/Canada/Europe)
-
I have not updated my iPhone 4 since the IOS 5.1 update. Can I now update it with the latest software even though I am missing other updates?
When going to your software updates on your device it will provide you with the latest available update for your device.
the iPhone 4 will update to iOS 7.0.4 provided all other updates the device is asking for has been completed.
Good luck friend. -
HT1174 I updated ITunes with the latest software. Now my ITunes won't sync with my IPod.
I updated my Itunes to the latest software. Now when I plug in my IPod nothing happens.. Tried the suggestions tha Help still no connect.
Does the iPod appear in iTunes?
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar and Control+B to show the Menu bar
Maybe you are looking for
-
Leopard slows down and freezes - please help
I'm running Leopard on a Macbook and I have had startup problems and slowdowns in general a couple of days now. When I start up the machine I get the apple logo, the spinning circle and then the blue screen for about 2-3 minutes before I get my Leopa
-
Class Not Registered error upon using MS Office Report
Hello, Using LabVIEW 2010, I've just installed the Microsoft RGT trial from NI, along with the Office 2010 trial from Microsoft. Upon trying to drag the MS Office Report VI to my block diagram, the configuration dialog appears but immediately an erro
-
Handling update and insert in a database table
Hi guys, I have some data in a database table which I created.Every day some new records come into the table.what i want is that if the account no of the new record which comes say today already exists in the table hen I do not insert a new record bu
-
I have an upgrade in June and when I upgraded before I had a $100 credit towards a new phone. Will I have any credit this time? I am not the primary acct holder, my mother got a Blackberry a few months ago because it was free. I know the credit thing
-
Hi Is there any way of syncing the to-dos on your ical with the iphone 3g Any help would be much appreciated, Thank You