Cannot update Vendor Master (LFA1,LFB1,LFBK) in the background

Hi All,
I am workingon a requirement to update vendor master (LFA1, LFB1, LFBK etc) and after doing extensive research on SDN I came to know there are no BAPIs to update vendor and got information on function modules I can use and finally ended up using FM "Vendor_Update". I thought it is working fine because data gets updated in tables but when I checked the same vendor through transaction XK02, it still shows the old data! I even tried BDC recording with "Call Transaction" and it works in fine in foreground (I can see changes in tables and XK02) but nothing works in the background but user requires the program to run in the background. I spent last 6 hours on SDN researching and trying several suggestions but no luck yet. Can someone please share any information on any solution to resolve this?
Thanks in advance.
Ravi

Hi All,
I figured out that I have to check "Use central address management" check box which will be visible when you only record with option "Simulation in background".
Thanks.
Ravi

Similar Messages

FM to update Vendor Master record

Hi,
Is there a Function Module which we can call to update Vendor Master record. Most specifically, I would like to update the Name1 field. The program I am creating will run as a daily job and we do not wish to use BDC. Any help is appreciated. Thanks!

Hi, I found FM vendor_update and have tried passing in I_LFA1 and I_LFB1 to update a particular vendor. It seems to work but I am still exploring what the other parameters are used for. Any tips?

Creating / updating vendor master from CREMAS03

Hi All,
I am getting vendor master data from external system and SAP XI will convert this into Idoc of message type CREMAS03. I would like to create/update vendor master in R/3 system from Idoc CREMAS03. Which function module / BAPI will cater to this need.
Thanks and best regards
Kalingeri

Hi
Check in WE57 using the Message type & Idoc type & direction.
IDOC_INPUT_CREDITOR & IDOC_INPUT_CREDITOR_MDM are the the two Func modules being used. You can use any one of them based on your reuirement
Thanks & Regards
Kishore

BAPI/function module to create/update vendor master data

Hi
We are on ECC 50 and have a need to update vendor master data through a programatic interface ( non-dialog ) with ABAP. What is a good function module that can be used to create/update vendor master data - I looked at BAPI_VENDOR_CREATE and did not find any input interfaces that can be passed to this BAPI.
Previous experiences with the right BAPI for this purpose that can be shared is appreciated. <REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 26, 2008 5:58 PM

Hi Kiran,
If you want to load the vendor data into sap its better to go with LSMW batch input program.
object 0040
method 0001
program name RFBIKR00
Program type B
this would be a good choice. Recently i did the same.

I am now using 10.6.8. Downloaded Maverick but cannot update OS on HD because get message the disk is not formatted as Mac OS extended(journaled). Tried to use Disk Utility as per instruction but cannot complete operation.

I am now using 10.6.8. Downloaded Maverick but cannot update OS on HD because get message the disk is not formatted as Mac OS extended(journaled). Tried to use Disk Utility as per instruction but cannot complete operation.

Barney-15E:
The partition method worked after some trepidation. I got the spinning beach ball after partitioning and couldn't go further till I named the second partition. That may have done it. Right now, things seem to be working o.k. I'm updating a current iPhoto and will have to get a MS Word program that will function on the current OS and a current Quicken.
If necessary, can start up from the 10.6.8 system which I downloaded to an external HD before updating. I can always fall back on that. Also, I hope I don't get too many disconnects. Thank you for your help.

My problem, cannot update application, how i want to change the store.

my problem, cannot update application, how i want to change the store.

Hello there muhamadamirul,
To change the region your Apple ID is using use these instructions.
Change your iTunes Store country
Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information.
From: iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Regards,
Sterling

Error in DTP (The master data is deleted in the Background)

Hi,
while loading the data to Data target (0chrt_acct_attr) through DTP...... I got the Error " The master data is deleted in the Background". Plz advice me it is an urgent issue.

Does the log in SLG1 say any more details?
Use RSDMD as Object & MD_DEL as Sub Obj. Leave the other field to *.
Is it happening for 1 specific object or for all? What type of data (attr or text)?

Update Vendor Reconciliation Account - LFB1-AKONT

To Update LFB1-AKONT, on Create or change of Vendor based on some criteria , I have tried using the BADI
SAPMF02K ( Used only for Checking data)
and the BTE 00001421 VENDOR MASTER DATA: Save with data transfer Also does not work.
Have set the values inside and the update indicator, still not working. Am I missing somethign?
Please suggest a solution.
Thanks,
Vinotha M

Check badi VENDOR_ADD_DATA
method PRESET_VALUES_CCODE

To update Vendor master data

I have 4300 records in vendor master data LFA1. I have to update industry code corresponding to each vendor .
Can anyone suggest me how can i do it ?
Is there any t-code availaible to do it. So i can make BDC program to do this.
Help me on this ...
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
Edited by: Rob Burbank on Jun 24, 2011 4:20 PM

Hey XK02 is for Vendor Master change.
Make sure if you write BDC check the flag No BatchInput in SHDB recording.
Or else Use the MASS transaction for doing so.
Since you want to change only one field data LSMW is also simple way to do it.
Hope this Helps,
Regards,
Bhargav

Updating Vendor Master Address from HR Master using PRAA

Hi All,
When PRAA updates the Address into the Vendor Master from Infotype 6 subtype 1, does it consider the Second Street address as well?
Some employees have 2nd address line populated in their IT0006 record and this isnt showing in their vendor account.
Regards,
Anjali.

Hi Anjali,
No, the sttandard program does not update any subtypes of infotype 0006 other than subtype 0001. However, you can adapt this to suit your needs: an empty routine is supplied in the includes RPRAPAEX and RPRAPAEX_001 which you can adapt to your requirements You must implement the user exit routine 'set_address_by_user'. An experienced ABAP programmer can do this.
Regards,
Rodrigo

MM: MIR7: How to display vendor master data "bank code" in the invoice doc.

Hi all,
I would like to display the bank code of the vendor in the header screen of the invoice. At the moment only the name of the bank is visible. Is there a possibility in the customizing to modify the screen of transaction code MIR7? I do not want to make a modification to the SAP Standard.
Many thanks in advance.
Regards,
Max

Hi,
You can use custom validation program (Z*) by copying standard validation (RGGBR000) program.
Modify the validation program to check table vendor master data.
After that, you need to assign this custom validation program to GBLR application area in GCX2.
Thanks

LSMW Mass Update Vendor Master

I have a request to use LSMW to read all vendor records and reformat and update the tax code (LFA1-STDC1) field. Does anyone know if this can be done with LSMW? I am not sure how to do it. Or, is it easier to develop an ABAP routine to do the updates? Any help will be rewarded.

For mass updation one can use LSMW Object: 0040 / 0001 / RFBIKR00 / B or else try using FM vendor_update .
null

Update vendor master contact address

hello Folks,
is there any function mdoule to update the Vendor Contact address.. I have searched in SCN and i found that in some threads there is no function module available to do so.
Can any one tell me if this is correct .. we cannot with BAPI or FM .
Regards,
raj

Hi Raj,
I had similar issue in my current project. This answer might be helpful for others.
Go to table KNVK ..enter your vendor numbers LIFNR & note down the unique number in field PARNR .
Change partner contact details in tcode: MAP2 with help of unique numer.
You can also develop LSMW with reference to transaction MAP2 for upadting partner address.
Thanking you
Prakash

Help with replicating/updating vendor master data

Hi,
Currently, we run the bbp_vendor_sync program to do the replication. It does the job of both bbpgetvd (new vendor creation) and bbpupdvd (update existing vendor).
But the problem is, we have two number ranges for vendors. One is Numeric and other one is Alpha.
Group -->AB From 0010000000 to 0699999999
Group -->AZ From A to ZZZZZZZZZZ
The vendor synchronization program can consider only one number range at a time i.e.
either Numeric or Alpha. So, we have to switch the active number range
and run the program twice., first for numeric and then for alpha.
In order to avoid this, I'm looking at implementing bbp_transdata_prep which I was told would take care of this issue.
I looked around for documentation/sample code for bbp_transdata badi and couldnt find any on SAP help site or SDN.
Wondering if someone can help with the documentation/sample code and difficuly level of implementing this BADI.
Any help would be highly appreciated and suitable points would be awarded for your help.
Also, if there is another way to solve this issue without implementing transdata badi, pls. let me know.
TIA,
Seyed

Hi
Please go through this ->
http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/42/d3b671ba67136fe10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/bb/6c0e3b02616a42e10000000a11402f/frameset.htm
Sample BADI Implementation
BADI Definition - BBP_TRANSDATA_PREP
Purpose -> Impl. for BBP_TRANSDATA_PREP, Delete Invalid Mail Addresses
PREPARE_REPLICATION_DATA method ->
method IF_EX_BBP_TRANSDATA_PREP~PREPARE_REPLICATION_DATA.
FIELD-SYMBOLS: <LFS_ADR6> TYPE ADR6.
LOOP AT CT_ADR6 ASSIGNING <LFS_ADR6>.
 IF <LFS_ADR6>-SMTP_ADDR NS '@'.
 DELETE CT_ADR6.
 ENDIF.
ENDLOOP.
endmethod.
PREPARE_UPDATE_DATA method ->
method IF_EX_BBP_TRANSDATA_PREP~PREPARE_UPDATE_DATA.
FIELD-SYMBOLS: <LFS_ADR6> TYPE ADR6.
LOOP AT CT_ADR6 ASSIGNING <LFS_ADR6>.
 IF <LFS_ADR6>-SMTP_ADDR NS '@'.
 DELETE CT_ADR6.
 ENDIF.
ENDLOOP.
endmethod.
Hope this will help.
Regards
- Atul

Update vendor master

Hi Experts,
I have requirement where I want to automatically update bank details.
Update Bank account number with “-” at second last position only for preferred bank account.
I have used BADI ‘VENDOR_ADD_DATA’ and method ‘CHECK_ALL_DATA’ but it is
giving syntax error as : ‘The field "T_LFBK" cannot be changed’
Following is my sample code:
loop at t_lfbk into ls_lfbk.
 clear: len.
 len = strlen( ls_lfbk-bankn ).
 if ls_lfbk-bvtyp = '0001'.
 len = strlen( ls_lfbk-bankn ).
 len = len - 1.
 concatenate ls_lfbk-bankn(len) '-' ls_lfbk-bankn+len(1) into ls_lfbk-bankn.
 clear len.
 endif.
 modify t_lfbk from ls_lfbk.
endloop.

Hi Sreekanth,
I have tried this code, but it gives run time error as follows :
Short Text
 Error at assignment: Overwritten protected field.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "ZCL_IM_VENDOR_ADD_DATA========CP" had to be
 terminated because it has
 come across a statement that unfortunately cannot be executed.
Error analysis
 A new value is to be assigned to the field "<FS>", although this field is
 entirely or partly protected against changes.
 The following are protected against changes:
 - Character literals or numeric literals
 - Constants (CONSTANTS)
 - Parameters of the category IMPORTING REFERENCE for functions and
 methods
 - Untyped field symbols not yet assigned a field using ASSIGN
 - TABLES parameters if the actual parameter is protected against changes
 - USING reference parameters and CHANGING parameters for FORMs, if the
 actual parameter is protected against changes and
 - Accesses using field symbols if the field assigned using ASSIGN is
 protected (or partially protected, e.g. key components of an internal
 table with the type SORTED or HASHED TABLE) against changes
 - Accesses using references, if the field bound to the reference is
 protected (or partially protected) against changes
 - External write accesses to READ-ONLY attributes,
 - Content of a shared object area instance accessed using a shared lock
 (ATTACH_FOR_READ).

Cannot update Vendor Master (LFA1,LFB1,LFBK) in the background

Similar Messages

Maybe you are looking for