Cannot upgrade an AP to LWAP using the upgrade tool on Windows 7

Hello,
    I have two Windows 7 computers and neither one will successfully upgrade a 1242 AP to LWAP.  However, I go to a coworker's XP machine and run the tool without issues.  On Windows 7 I keep receiving the error message of ACL or Firewall is blocking.  I have added rules and then even tried disabling the firewalls completely on both computers and still no success.  Help!
Thanks,
Kristen Woodard
Network Engineer II

As an aside here, if the AP are newer, manufactured after 6/2005(Has a MIC and not a SSC), you can do a normal archive download command to run the upgrade to the recovery image.  Can even be scripted to run multiple times via shell/cron
HTH,
Steve
Please remember to rate helpful posts or to mark the quesiton as answered so that it can be found later.

Similar Messages

  • I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help needed.

    I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help is needed to access those documents using the resident software on my MacBook Pro rather than the Beta software on iCloud.com.

    I have iCloud Drive set on the Finder sidebar and use that to open the Numbers Spreadsheet on iCloud.
    OSX 10.10.3
    Best.

  • How come I cannot use the Editing tools when i am using Adobe Acrobat Reader DC It wants me to Buy Now.  But when I use Adobe Acrobat Pro DC i have no problem using the Editing tool yet   I had Adoboe Acrobat XI Pro then it was upgraded to this DC stuff

    I am already paying a subscription for Adobe Acrobat XI Pro  Now it want me to buy when using the edit tool or even the tool to insert pages Never had that problem before??????????????

    Acrobat Reader can't edit PDF files. Use Adobe Acrobat Pro DC.

  • I cannot shut dow my MacBook Pro using the apple icon (as it was suppose to be), actually I have to press and hold the on/off buttom. I have taken twice for Mac dealer and they did not solve the problem. What must I do?

    I cannot shut dow my MacBook Pro using the apple icon (as it was suppose to be), actually I have to press and hold the on/off buttom. I have taken twice for Mac dealer and they did not solve the problem. What must I do? I would to remark that I have installed 2 antivirus and uninstalled one of them. Since then I have facing this troublesome issue. Thanks

    Uninstall the other AV software. They are not needed. All they do is cause trouble like you are having now.
    If you have been forcing the Mac to shut down with the power switch you may nave corrupted your disk. You should repair it with disk Utilty to remove any corruption the shutdwons may have cased.
    Allan

  • TS4062 On my Iphone I have 1-Camera roll, two Photo Libraries, and 1 delete.  I cannot get rid of the Photo albums off the phone.  I cannot take things off my Iphone using the itunes because it doesn't pull the Iphone up.

    On my Iphone I have 1-Camera roll, two Photo Libraries, and 1 delete.  I cannot get rid of the Photo albums off the phone.  I cannot take things off my Iphone using the itunes because it doesn't pull the Iphone up.

    Pat2006 wrote:
    I cannot take things off my Iphone using the itunes because it doesn't pull the Iphone up.
    Correct. You don't use iTunes to get photos off the iPhone.
    See this -> http://support.apple.com/kb/HT4083

  • I use photoshop CS3. Shortly, when I try to use one of the tools, they react only with the eraser. So I cannot use the other tools. I tried to reset in general preferences all warnings. Then I can use the tools again, but with the next picture I get stuck

    I use photoshop CS3. Shortly, when I try to use one of the tools, they react only with the eraser. So I cannot use the other tools. I tried to reset in general preferences all warnings. Then I can use the tools again, but with the next picture I get stuck with the eraser again. What can I do? Joost van Santen

    Have you tried resetting all tools?

  • I cannot use the type tool in Photoshop CC it goes black. Why?

    I cannot use the type tool in Photoshop CC it goes black. Why?

    What goes black?
    What OS version are you using?
    And have you updated your video card drivers from the GPU maker's website? (bugs in video drivers being the most common cause of display issues)

  • HSL Panel cannot control individual colors in the photos. Using the target tool and the colors change in the entire photo.?

    HSL Panel.  When using the targeted tool I cannot control individual colors in the photo.  In Luminance the entire photo is changing not just one area?

    Yes, that's the way it works. The target tool is simply a way to pick a colour to modify, but all colours like that one, no matter where they are in the image, will be modified.
    Hal

  • I have lost my iphone and now i cannot locate it even when i use the find my ipphone app

    i have lost my iphone and now i cannot locate it even when i use the find my ipphone app

    It may be off, out of battery power or no internet connection. The lower section of the following link has some other things you may want to do (change passwords, report to law enforcement and to your cellular carrier: If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support

  • After I used the migration tool to transfer contents of my previous MacBook Pro I cannot log in to my new MacBook Pro. I have tried using old and new passwords but to no effect. I cannot use my Apple ID. How can I re-set my MBook to factory setting pls?

    I have been a proud owner of Apple products for many years. However, this problem is very frustrating! Any help will be appreciated. I used the migration tool to transfer the contents of my old MacBook Pro to my new shiny MacBook Pro Retina! After migration finished I tried to access my new MacBook Pro retina. However, when asking me to log in it refuses to accept the passwords from either the new MacBook or the old one! I do not have the option of using my Apple ID either.... Please help! Unfortunately, I am past my 90 day Apple Support!!

    Restart holding down the CMD+R keys, launch Disk Utility and erase the HD, quit DU, and restore the OS. On first boot, use the Setup Assistant to do the migration. Details in Pondini's Setup New Mac guide.

  • Photoshop CC - Cannot control + click to select a different shape while using the pen tool?

    I used the pen tool constantly in photoshop cs6 and would often use control + left click to select a different shape while still using the pen tool.
    I'm now forced to switch to the move tool to select another layer? Why was this feature removed / changed?
    Fix: After fooling around more, here is how I fixed it:
    The new Direct Select Tool by default is set to "active" layers. Switch it to "all layers"
    Message was edited by: Joe Horan

    A new problem = Selecting multiple points with control + click + drag is selecting ALL shape layers... Jesus christ, why was this changed????
    I now have to double click the shape I want to select? Why? What is the point of this?

  • Cannot use the text tool in PS6

    When I try to use the text tool, I get the error message that "something prevented the text tool from being initialized."

    More info please (OS etc.). 
    http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html
    Boilerplate-text:
    Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

  • Adobe Photoshop CS4/5 Crashes when using the Move Tool

    Hello. I'm here because I'm having an issue with Photoshop.
    I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
    A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
    Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
    This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
    My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
    I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
    The error code, from Event Viewer:
    Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0xc0000005
    Fault offset: 0x65637275
    Faulting process id: 0xe28
    Faulting application start time: 0x01cb2bb3471d87bf
    Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
    Faulting module path: unknown
    Report Id: b412e368-97ab-11df-8f49-001d60b646ef
    Details:
    System
    Provider
    [  Name]
    Application  Error
    EventID
    1000
    [  Qualifiers]
    0
    Level
    2
    Task
    100
    Keywords
    0x80000000000000
    TimeCreated
    [  SystemTime]
    2010-07-25T05:15:57.000000000Z
    EventRecordID
    78845
    Channel
    Application
    Computer
    Gatherum
    Security
    EventData
    Photoshop.exe
    11.0.2.0
    4bf2d4f6
    unknown
    0.0.0.0
    00000000
    c0000005
    65637275
    e28
    01cb2bb3471d87bf
    C:\Program  Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
    unknown
    b412e368-97ab-11df-8f49-001d60b646ef
    Details in XML View:
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
    <EventRecordID>78845</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Gatherum</Computer>
    <Security />
    </System>
    - <EventData>
    <Data>Photoshop.exe</Data>
    <Data>11.0.2.0</Data>
    <Data>4bf2d4f6</Data>
    <Data>unknown</Data>
    <Data>0.0.0.0</Data>
    <Data>00000000</Data>
    <Data>c0000005</Data>
    <Data>65637275</Data>
    <Data>e28</Data>
    <Data>01cb2bb3471d87bf</Data>
    <Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
    <Data>unknown</Data>
    <Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
    </EventData>
    </Event>
    System Specifications:
    Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
    System Manufacturer: HP-Pavilion
    System Model: GN697AA-ABA a6214x
    Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
    Memory: 2048MB RAM
    DirectX Version: DirectX 11
    Display Device:
    Name: NVIDIA GeForce 8600 GTS
    Manufacturer: NVIDIA
    DAC Type: Integrated RAMDAC
    Approx. Total Memory: 1010 MB
    Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
    Photoshop Version: CS4 Extended 11.0.2

    Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process.  That said, with a little research and care you can do it.  Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
    First, you'll need to know what your operating system capacity is.  For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in.  What version of Windows are you running?
    Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches.  There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
    http://www.kingston.com/
    It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade.  Every computer is different.
    If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
    -Noel

  • Unable to Open RPD in online mode by using the Admin tool in OBIEE 11g.

    Hi All,
    I Installed OBIEE 11g (11.1.1.5) in Linux Box.
    When I am trying to Open the RPD in online mode by using the Admin tool, I am facing the below error.
    Logon failed due to:[nqsError:43113] Message returned from obis
    [nQSError:13037] Cannot connect to BI Security Service,please make sure this is running properly (with SSL ot not) in EM.
    [nQSError:37001] Couldnot connect to the Oracle BI Server Instance.
    All my services are up and the status are Alive,My biserver is in Running Mode and I am able to open the Answers page too.
    I am able to open the same RPD in Offline mode but not in Online mode.
    I Created a System DSN in ODBC Data Source Administrator for opening the RPD by using the OracleBIServer1 driver,still the issue doesnt resolve.
    Any help is highly appreciated.
    Thanks,
    Praveen.
    Edited by: 885630 on Dec 21, 2011 3:33 AM

    Hi All,
    This question is answered.
    The Resolution is
    While Installing the RCU i created two instances so the RPD is not able to take the correct instance.After deleting the other instance now i am able to open the RPD in online mode as it is pointing to only one instance.
    Thanks,
    Praveen.

  • How can I use the versionning tool to make a coherent solution to export

    how can I use the versionning tool to make a coherent solution to export all objects used in my project to other db schema for testing as well as for implementation .
    I want to know proper steps to Import/export objects.
    while I am exporting my Master repository and work repository then again importing the all , no problem comes all the physical logical schema mapping and mapping between interfaces retains but
    while I am trying to export and import one or two packages on the ease of testing then I am getting so many mismatches manually I am setting all why so?
    required ur suggestion
    Palash Chatterjee

    kelly-bot wrote:
    Thanks for the tip, but like I said, I dont want to always have to use the arrow keys. Is it not possible to actually DRAG one pixel at a time? I recently upgraded to CC from CS3 and I keep running into things that feel like a downgrade. Super disappointed.
    Our posts overlapped there.  Are you saying you could reliably drag one pixel with CS3? 
    What other issues are you having?  Things like the Crop tool can feel strange at first, but I promise you you'll never want to use Classic mode once you get used to it.

  • How do I use the move tool in CS5 to put two images on to an A4 sheet?

    Have recently upgraded from CS3 to CS5.
    I often print out two images on A4 paper.  Under CS3 I would simply adjust and crop 2 images to say 7 ins x 5 ins, after that bring up a new A4 sized sheet (file, new), then using the move tool I'd move the two separate images on to the A4 sheet and print.  Fine!
    Now under CS5, once I've adjusted my first image then try to bring up a second image to adjust that one I seem to lose the first one from the screen.  But on going back via Bridge and clicking on the image it re-appears - problem is, I lose the second image.
    When I bring up a new A4 sheet neither of the images stay on the screen and there is nothing to move.
    Have been into Preferences to see if there is anything there to help but can't see anything.
    Does anyone know what is happening here and what I'm doing wrong i.e. how do I get 2 separate images on to an A4 sheet?
    Thanks,
    Bob Eveleigh.

    There have been changes since cs3, mainly that cs5 uses tabs.
    Tabs can be confusing if your coming from cs3.
    If your in the tabbed mode, try going to Window>Arrange>Tile.
    All your open documents should be visible on the screen.
    If this is the cause of your frustrations, you can read more here:
    http://help.adobe.com/en_US/photoshop/cs/using/WS8599BC5C-3E44-406c-9288-C3B3BBEB5E88.html #WS6389D09B-91D5-4474-9AED-C52AE33356EB
    MTSTUNER

Maybe you are looking for