Cannot upgrade firmware to WRT54G v5

My Linksys WRT54G router has been dropping out lately and I've been recommended to update its firmware as it is very out-of-date. Well, everytime I try to upgrade the firmware to it, I get an error message that says "the connection to the server was reset while the page was loading." I'm trying to upgrade the firmware through the router's site 192.168.1.1 under the adminstration tab. What else can I do to upgrade the firmware as that option is not working?

Before updating the firmware of your router, you will need to download the updated firmware file from homesupport.cisco.com. Firmware files are in .bin format.
• To prevent upgrade failures make sure that your computer is connected to the router using an Ethernet cable for stable connectivity. Upgrading the firmware wirelessly may cause permanent damage to the router since wireless connection may be unstable during the process.
• Use a different Internet browser if Internet Explorer doesn’t work or use a different computer to perform the upgrade.
• To prevent failure disable firewall to ensure that the upgrade will not be disrupted.
• Make sure that you downloaded the correct firmware and version for your device to prevent technical problems that may damage the router.
Here is the link for upgrading the router's firmware http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=4030&userrole=Linksy...

Similar Messages

  • Cannot Upgrade firmware on WRT54g wireless v5 to v6

    Get as far as the Administration tab and all from there on is gibberish.  There is NO Firmware Upgrade tab.

    Hi, try to disable the firewall on the Pc on through which you
    are trying to access the setup page for the linksys router. If that
    does not resolve the issue then you can download the Firmware for the
    router [wrt54g v5] from www.linksys.com/download and you will also
    have to download the TFTP file from ftp.linksys.com/pub/network
    When you run this file it will ask for the Sever [192.168.1.1] >
    password [admin] and the File would be the wrt54g Firmware file.

  • Trying to upgrade firmware for WRT54G V6 on Windows 7

    Since buying a windows 7 PC, my WRT54G V6 is dropping connection a lot more than it should (1/hr).  Because of this i thought to update the firmware.  I have downloaded the new .bin and accessed 192.168.1.1, but when i try to move to the ADMINISTRATION page all i get is ascii chars and no admin page, the only pages that actually work are the basic setup and DDNS setup.  For info i'm currently running Firmware Version: v1.00.9
    Asked for help online and got as far as downloading Tftp,0, but that onlyworks to the point where it tells me ''unable to get responses from the servers''
    can anyone help or do i just get a new router ???
    Thanks in advance, les
    Solved!
    Go to Solution.

    Try to upgrade the router's firmware using TFTP utility..Download the TFTP utility and save it on the desktop.Also Download the firmware for WRT54G v6 and save it on the desktop.
    Follow these steps to upgrade the firmware on the device : -
    Double click the TFTP.exe file and click run.
    For Server- Enter the IP Address of the router that you assigned.  By default, the router is 192.168.1.1...
    For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
    For File- Click the triple “…” button and browse for the .bin firmware file...
    Click Upgrade button to start upgrading.  A progress bar should show up to show the progress.
    Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    **Make sure your modem is connected to the router on internet port and the computer on the ethernet port of the router while you run the TFTP program.

  • Cannot upgrade firmware on new Zen

    So, I've got the new 6gb zen, I have XP SP2, installed wmp, then installed the software that came with the player, got the upgrades from creatives website... went to upgrade the player... "player not connect" - connect player (it charges so IS connected) and nothing.
    Done all the usual, uninstalled everything, re-installed it all and nothing has changed.
    I cannot see the Zen at all on my PC.
    Also I note, creatives knowledge base states "DO NOT connect your player to your PC before setting up the software. "
    Where as microsoft website says "If you have a Creative ZEN device, make sure the device has the latest firmware before you install Windows Media Player " So what do I do first If your in cahoots with each other, at least state corresponding advice.
    ANy advice
    Cheers
    ps, BIG complaint on having to use windows media!! Why doens't the new Zen come with a complete software package, I bought creative as all their other products had excellent software with the player.... are creative in cahoots with microsoft
    I always praised creative on all thier products.... had soo much grief with apple and was happy to come back to creative after 3 years of hell with an ipod, and now creative do this It's unbelievable.
    Message Edited by bretch on 04-9-2008 02:47 PM

    Earlier this week I had the same problem with a used Zen Micro 5GB that I purchased. After hours of the same problem, I finally remembered what I had to do when installing some newer Creative Players earlier this year.
    One way is to revert back to Windows Media Player 0 by removing the WMP and the WMP Runtime . Then install the firmware. That's what worked for me this time.
    The other method was to revert to WMP 0 (using the above method) and also removing all the Creative software installed on my computer (using add/remove programs), Then the computer recognized the new players. After installation, I was able to put the Creative software back on my computer and everything then worked. At a later date, WMP 0 asked if I wanted to install new updates and without thinking, I clicked yes and then I had WMP back and everything still worked.
    Hope this helps you. I found some of the information in the tutorials on the Support page on this site and other information on fixya.com (an Internet site for fixing all sorts of MP3 Players including Creative.)
    You know, it shouldn't be this hard to get a player running, as most people buying their first players aren't very computer literate. I remember when purchasing my first Zen Micro several years ago, I was completely snowed as to what to do when I couldn't hear the music on start up. Of course then I locked up the player and spent a long time trying to figure out what happened. I can see why so many people think they got a lemon, and return their players.
    luvmyrescuedogs

  • Upgrade Firmware for WRT54GS V.6

    I am new to the wireless world and just purchased the WRT54GS V.6 router and it says I have downloads for this firmware. I have copied so many instructions I don't know where to start first. Can someone give me some advise as to what to do? Thanks for any information!!!

    Hi, you seem to know the way around the router, so I hope you help me. I downloaded  the new firmware for v6. and installed it. It call my attention the fact that the firmware started to load slowly, saying that it will restart, and about 40% it congratulate me for the work done, but no restart and after I restarted manually, no wireless!!! Any idea? from the first Easy Link I got a configuration on a pen flash drive, and everytime I restart, I use it, but it is not automatic like it used to be on my older router. Besides the fact that I have to have the computer wired to get it wireless, which is absurd. Thanks if you can help
    Alfredo

  • WISM1 cannot upgrade firmware

    Hello,
    I'm having an issue upgrading a Cisco WISM (just a WISM1), we had one of these line cards fail and we got a replacement.  The replacement comes with 2 firmware releases, one of which is the minimum required for compatibility with VSS on a 6500 (which we have.) 
    Here's the information for the 6506:
    Cisco IOS Software, s2t54 Software (s2t54-IPSERVICESK9-M), Version 15.1(1)SY, RELEASE SOFTWARE (fc2) <<< supports the WISM
    The boot images the WLC came with are:
    Primary Boot Image............................... Code 3.2.78.0
    Backup Boot Image................................ Code 3.2.171.6 (active) <<< VSS compatibility on a 6500 series switch
    (3.2.171.6 is the release which first supports VSS.  As you can see i've made this backup image active.)
    I have been attempting to upgrade the firmware image, i've used several tftp servers (on different boxen, all with the host firewall disabled) - Pumpkin 2.7.3, the latest TFTPD32/64 and the latest (10.something, > 32 MB file support was introduced in an earlier release) Solarwinds TFTP server.  Neither of these work, it stops at 32 MB (with the possible exception of Pumpkin there is no question the latter support > 32 MB, I use these products all the time to upload larger IOS images and what-not.)
    We're trying to get to 6.0.196.0, after failing I tried 4.2.176.0 as an intermediate upgrade instead but received the same error (below.)
    Here's the debug log:
    Thu Mar 13 19:38:29 2014: RESULT_STRING: TFTP Code transfer starting.
    Thu Mar 13 19:38:29 2014: RESULT_CODE:1
    TFTP Code transfer starting.
    Thu Mar 13 19:38:32 2014: Still waiting!  Status = 2
    Thu Mar 13 19:38:33 2014: Locking tftp semaphore, pHost=<omitted> pFilename=SWISMK9-4-2-176-0.aes
    Thu Mar 13 19:38:33 2014: Semaphore locked, now unlocking, pHost=<omitted> pFilename=SWISMK9-4-2-176-0.aes
    Thu Mar 13 19:38:33 2014: Semaphore successfully unlocked, pHost=<omitted> pFilename=SWISMK9-4-2-176-0.aes
    Thu Mar 13 19:38:33 2014: TFTP: Binding to local=0.0.0.0 (***Is there some way to bind this to the WISM management IP?***) remote=<omitted>
    <snip>
    Thu Mar 13 19:20:14 2014:  33684480 bytes
    Thu Mar 13 19:20:14 2014:  33715440 bytes
    Thu Mar 13 19:20:14 2014:  33746400 bytes
    Thu Mar 13 19:20:15 2014:  33777360 bytes
    Thu Mar 13 19:20:15 2014:  33808320 bytes
    Thu Mar 13 19:20:15 2014: TFP End: 516 bytes transferred (1 retransmitted packets)
    Thu Mar 13 19:20:15 2014: tftp rc=0, pHost=172.31.118.250 pFilename=SWISMK9-4-2-176-0.aes
                  pLocalFilename=/mnt/download/local.tgz
    Thu Mar 13 19:20:15 2014: tftp = 6, file_name=SWISMK9-4-2-176-0.aes, ip_address=<omitted>, msg=Unknown error - refer to log
    Thu Mar 13 19:20:15 2014: upd_get_code_via_tftp = 6 (target=268435457 msg=Unknown error - refer to log)
    Thu Mar 13 19:20:15 2014: RESULT_STRING: TFTP receive complete... extracting components.
    Thu Mar 13 19:20:15 2014: RESULT_CODE:6
    TFTP receive complete... extracting components.
    Thu Mar 13 19:20:17 2014: Still waiting!  Status = 2
    Thu Mar 13 19:20:19 2014: RESULT_STRING: TFTP Failure while storing in flash!
    Thu Mar 13 19:20:19 2014: RESULT_CODE:7
    TFTP Failure while storing in flash!
    Thu Mar 13 19:20:20 2014: Still waiting!  Status = 2
    Thu Mar 13 19:20:23 2014: ummounting: <umount /mnt/download/>  cwd  = /mnt/application
    Thu Mar 13 19:20:23 2014: finished umounting
    Here are the settings i'm using (note that it's all at the TFTP root, the path is blank but it does grab the file ... using "./" as the path makes no difference.):
    Mode............................................. TFTP
    Data Type........................................ Code
    TFTP Server IP................................... <omitted>
    TFTP Packet Timeout.............................. 254 (not default, set for troubleshooting)
    TFTP Max Retries................................. 254 (not default, set for troubleshooting)
    TFTP Path........................................
    TFTP Filename.................................... SWISMK9-4-2-176-0.aes
    Again, it appears that the tftp server does not support files > 32 MB (the docs i've read say that this error message is supposed to indicate exactly that), but it 100% *does* support larger files.  What could be causing the transfer to time out?  Is there some limitation on the controller which prevents large files being delivered via TFTP (and if so, is there a way around that?)  Also, there seems to be no other alternative other than TFTP (at least with the release i'm currently stuck at) ... or is there?
    Thanks,
    Jim

    HI,
    1. First try with 3CDaemon , I normally do with this .
    2. If still fails then use anouther laptop or computer.
    Regards
    Dont forget to rate helpful posts

  • Cannot upgrade Firmware on Zen Mi

    Just bought a Zen Micro yesterday, it came with the .0.03 firmware.
    Wanted to upgrade to version 2 firmware because I used WMP and XP. Also would like to be able to drag and drop using windows Explorer.
    However everytime I try to upgrade the firmware, the firmware upgrade application on the PC is waiting for the Zen to reboot even if it did. The player formats his dri've, then reboot, then waits forever.
    I even unplugged the Zen after 30 minutes... everything is fine on the player, it still has the .0.03 firmware.
    Any help would be appreciated.
    Stephane

    Is the MediaSource detector on? If yes, try turning it off. Start MediaSource -> Tools -> Settings -> Detector.
    Jason

  • WRT54g V6, constant disconnect.. 2 week old unit.. upgraded firmware -- what the..?

    I upgraded firmware to the latest(november one). I reseted both router and cable modem and all 3 computer using it.
    I've tried something like 100 MTU number, and I still get the same disconnection problems.. seems the power LED is blinking while I get disconnected.
    it seems this is a pretty bad router, that gets overwhelmed when you download too much on two or more computer simultaneously.
    all my computers are using WIRED connections.
    I need help before I terminate this unit with a large wooden club.
    really need help, if linksys doesnt want to lose a customer forever.
    ps:also -- whats up with the cheap 2mb flash and 8mb ram on this version? earlier version of this unit had 4mb flash and 16mb ram.. im very sad to see you guys downgrading with higher version numbers.. nice marketing!

    I mean I tried 100 different MTU number from 1500 to 1000, with nothing happening..
    I've sent 3 emails to support, they all say they gonna answer within 24 hours and answer to all 3 of them within days.......
    ( Mod note: Edited for guideline compliance. Thanks! OnnagokorO)Message Edited by Vince_02 on 01-03-2007 10:54 PM

  • Can't update firmware on WRT54G

    I downloaded new firmware for my WRT54G. It currently has Firmaware version 1.00.60. The router was purchased at Best Buy for use with Vonage but I no longer use the phone part of the router.
    I downloaded the latest firmware from the Linksys site (4.30.5), both the zip file and the EXE. Whenever I try to use the EXE file, it tells me it can't get a response from the server. I've tried resetting the login information to leave the username blank (I had set my own username) but the router says this filed cannot be left blank.
    I tried to use the bin file but the instructions say to go to Administration and select the upgrade firmware option. There is no such option in my router. Is there any other way to force a firmware update?
    Thanks for any ideas you might have.

    Thanks for the pointers so far.
    I just realized I gave the wrong product name before. I have a WRTP54G router set up for Vonage. I downloaded the firmware update for it, but the instructions say to use the GUI to load wrtp54g_fw_3.1.17_us.img. The router does not have an option to update the firmware in the Administration section. Do you know if the *.img file can also be loaded using ftp, just like the *.bin files for the WRT54G router?
    If so, will I be "unlocking" the router from Vonage? I don't even have their service anymore - they weren't able to transfer my phone nuimber in over 60 days that I tried them. I'm not sure what I will be losing if I use a generic firmware with a unit that seems to be set up for a particular vendor.

  • Cannot Bring Wireless Router (WRT54GS v6) online -- Sysco light stays orange

    Tried and tried to to clear the router to create an new SSID but cannot. The sysco light stays orange or white and flashe.  If anyone can help I'd appreciate ya.
    Thanks 
    Bill

    Try upgrading the router's firmware :
    For WRT54GS V6 firmware  Download 
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • SCCP IP PHONE 7911 ERROR WHILE UPGRADING FIRMWARE

    Hi All ,
    I am  experiencing problem while upgrading Cisco IP phone model 7911 in my VoIP setup as my Cisco CM server is using firmware version ‘SCCP11.8-3-4SR1S’ for these phones. Whereas new 7911 IP phones coming from Cisco as RMA these days are having latest firmware version ‘SCCP11.9.2(1)’. While resetting the phones to factory defaults they are getting hanged during upgradation and giving error ‘ term11.default’. As per my research, i cannot upgrade or downgrade phone firmware from sccp11.8-3-4 to sccp11.9.2 and vice versa  directly.
    So i read the release notes of 9.2.1and  there I found, i have to upgrade phone first in 8.5.2 base release and then I can go any version.
    But when I am upgrading my phone into base release 8.5.2, sometime my phone prompt me ''ERROR'' on display and boot from its previous ifirmware and sometime it prompt ''UNPROVISIONED'' on the display and phone get stuck there.
    My CUCM version is                     -6.1.2.1000
    IP PHONE FIRMWARE version     -SCCP11.8-3-4SR1S(existing)
    NEW load version                         -SCCP11.8.5.2
    So request to all expert please suggest me to fix my issue.
    regards
    amit tanwar

    Hi All ,
    Anyone have any solution for my issue ?.
    regards
    amit

  • Me don't know apple password and me restore ipad a1430 ark apple id and password, I cannot install firmware. ios 7

    Below, me buy secendhand ipad a1430 3rd wi-fi+cell from them.
    I cannot upgrade software .... and ipad popup apple id and password ... me don't know.
    yesterday, me download firmware for restore. and Use UFD mode and install new ISO 7.
    And apple set language and set country, And popup Apple id and password Again (I don't know password and don't know email for re password).
    Please help me for this case.
    Best reg,
    Yutitum pong

    You have run into Activation Lock, an antitheft feature introduced by Apple in iOS 7.
    You will have to get the previous owner to sign into iCloud and turn off Find My iPhone for that phone. Without that you will never be able to activate this phone.
    If the shop where you purchased this phone cannot provide you with that information you need to return the iPhone and get your money back.
    The receipt from the shop is not sufficient to get Apple to clear the Activation Lock. You would need the original receipt from when the iPhone was purchased originally from an authorized reseller.

  • Downgrading firmware on WRT54G/access restrictions

    I had a WRT54G.  Access restrictions worked.  I upgraded the firmware and the access restrictions no longer worked. 
    So after researching, it appears the firmware I upgraded to was buggy and the access restrictions didn't work with the new firmware.  I couldn't figure out how to downgrade back to what I had. 
    Called Linksys and ultimately they said they would send a new router.  I asked if it would have the old firmware that my router had previously, where the access restrictions worked.  Yes, they said.
    New router arrives today.  Firmware is v1.02.2, June 7, 2007.  NOT the prior firmware.  Sure enough, the access restrictions still do not work on this router either.  I don't want to spend yet another two weeks trying to resolve this with Linksys.
    Question:  Is there a way to downgrade to firmware where the access restrictions actually work for WRT54G?  If so,
    what version should I downgrade to?
    where do I obtain it? and
    can I download the firmware and then install it using the administration/upgrade firmware tab on the router (even though it is a downgrade)?
    Thanks very much for any thoughts.

    Thanks for the suggestion, Badboy.  Unfortunately, although I could download the firmware and successfully load it onto the router, the access restrictions in that version do not work either.
    It doesn't seem as though all prior versions of firmware are on the ftp site, ftp.linksys.com.  For example, I also have a wrt54gs v. 4 (speedbooster) with the same access restriction problem.  It currently has a firmware version loaded that doesn't appear to be listed on that website.  (I couldn't download prior firmware for that version that worked.)  So, perhaps prior firmware exists for the wrt54g v. 6 that is not listed on that site also.
    Does anyone know if there is another site that has a more extensive collection of prior linksys firmware? 
    If not, I suppose I can call linksys again, but even if they send yet another router promising the old firmware on it, I suspect the message is just going to get lost between the promise made on the phone and the guy in the warehouse filling the RMA order.

  • Since I uploaded the new OS X Mavericks the App Store, Messages, Notes, Calendar, Maps and Preview will not launch/open. In Finder cannot find my files. Most crucially cannot upgrade OS X Mavericks software. I had two apple ID's, the old one not used

    Since I uploaded the new OS X Mavericks the App Store, Messages, Notes, Calendar, Maps and Preview will not launch/open. In Finder cannot find my files. Most crucially cannot upgrade OS X Mavericks software. I had two apple ID's, the old one not used

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • [SOLVED] Cannot upgrade system because of wlan

    Hi all, since 3 days i cannot upgrade my system because of broadcom wl dependencies and kernel version.
    I tried everything i know to fix this, but nothing happens.
    This is what i get when upgrading
    ┌─[smau @ neplero]-[~]
    └─[21:41:26]-[ $ ]> yaourt --noconfirm -Syu -d --ignore broadcom-wl
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    error: failed to prepare transaction (could not satisfy dependencies)
    :: Starting full system upgrade...
    resolving dependencies...
    :: broadcom-wl: requires kernel26<2.6.33
    ┌─[smau @ neplero]-[~]
    └─[21:41:52]-[ $ ]> uname -a
    Linux neplero 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:44:03 CET 2010 x86_64 Genuine Intel(R) CPU U2300 @ 1.20GHz GenuineIntel GNU/Linux
    edit: this is my network card
    ┌─[smau @ neplero]-[~]
    └─[21:57:43]-[ $ ]> lspci | grep Network
    02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
    that doesn't seem to be supported here http://wireless.kernel.org/en/users/Dri … CI_devices
    i've been trying b43 driver, but wl works better for me than b43, so i'd like to stay with it.
    any suggestion?
    thanks
    Last edited by samuele.mattiuzzo (2010-04-13 22:17:32)

    nope, i did it (b43 -w bla bla bla) and all went good (as it said...)
    ┌─[smau @ neplero]-[~/b43/broadcom-wl-4.80.53.0/kmod]
    └─[22:01:19]-[ $ ]> sudo b43-fwcutter -w "/lib/firmware/" wl_apsta.o
    This file is recognised as:
    ID : FW11
    filename : wl_apsta.o
    version : 351.126
    MD5 : 9207bc565c2fc9fa1591f6c7911d3fc0
    Extracting b43/ucode5.fw
    Extracting b43/ucode11.fw
    Extracting b43/ucode13.fw
    Extracting b43/pcm5.fw
    Extracting b43/b0g0initvals5.fw
    Extracting b43/b0g0bsinitvals5.fw
    Extracting b43/a0g0initvals5.fw
    Extracting b43/a0g1initvals5.fw
    Extracting b43/a0g0bsinitvals5.fw
    Extracting b43/a0g1bsinitvals5.fw
    Extracting b43/lp0initvals13.fw
    Extracting b43/lp0bsinitvals13.fw
    Extracting b43/b0g0initvals13.fw
    Extracting b43/b0g0bsinitvals13.fw
    Extracting b43/a0g1initvals13.fw
    Extracting b43/a0g1bsinitvals13.fw
    Last edited by samuele.mattiuzzo (2010-04-13 20:02:35)

Maybe you are looking for