Cannot upgrade. I fail each time with Code 1638 .

I am wanting to upgrade without Bing or messenger. I get message to uninstall Skype with Code 1638. I guess I will not get upgraded then.

Try this Skype removal tool.
http://community.skype.com/t5/Windows-desktop-client/Botched-uninstallment-with-Revo-now-I-can-t...
Remember to reboot your computer after running this tool.

Similar Messages

I tried updating iTunes to version 11.1.1, but installation fails each time even when I did it manually as was suggested. The message I receive is: "The installer has encountered an unexpected error installing this package. This may indicate a problem"

I tried updating iTunes to version 11.1.1, but installation fails each time even when I did it manually as was suggested. The message I receive is: "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324."

Hi hongkongpom,
Just wanted to say that after posting the problem, I had a chat with an iTunes' Tech Support, her name is Rebekah. My problem was resolved after that. Will list the chat history below in hopes that it may help you as well.
Good luck!
Samia
Chat Transcript
Friday, October 4, 2013 05:55 AM
Duration: 81 minutes 28 seconds
Rebekah:
Welcome to AppleCare chat support. Please give me a moment to look over your information.
Rebekah:
Hi, Samia! My name is Rebekah. If we get disconnected, please chat us back. http://www.apple.com/support/ipod/contactEnter the case number from the initial email we sent you. This gives the next advisor you chat with immediate access to your case history.
Rebekah:
Could you please confirm your serial number? I want to be sure we provide the best service possible for you, Samia!
SAMIA:
Sure, it's 8L8395UY2C5
SAMIA:
My problem is with iTunes.
Rebekah:
Thanks for that confirmation. Just a heads up, this is iOS Tech Support. We do support iPod touches, iPads, and iPhones, but not the iPod classic. But no worries! I can get you in touch with a phone Advisor who can get you in touch with the department that specializes in iPod classics and would be able to better assist you. Would that be OK?
SAMIA:
I wasn't able to install the new version of iTunes (version 11.1.1). The installation keeps failing. The they suggested the I install it manually and that failed too. I will attach the message I received.
SAMIA:
I don't have a problem with iPod.
SAMIA:
Just iTunes
Rebekah:
No problem! We can certainly troubleshoot iTunes as much as possible. It may come to the point that you may have to transferred, but we can do as much as possible during this chat!
Rebekah:
Thanks for the screenshot. It is a bit small so I am unable to fully see the message that you are receiving. What is the error message you are receiving?
SAMIA:
This is the message I received in case you weren't able to open the attachment: "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324."
Rebekah:
Thanks for that info!
SAMIA:
Pleasure!
Rebekah:
What version of Windows (XP, Vista, 7) do you have?
SAMIA:
Windows 7
SAMIA:
Windows 7 Home Premium
Rebekah:
Thanks for that confirmation. I do apologize for the delay, Samia. I am researching this error code now. You mentioned trying to install iTunes manually. To be sure I am on the same page, what steps did you take to do that?
SAMIA:
Well when the indsatalltion failed I was given instructions to select Download Only from Tools and then install manually. When I did it, I window popped up with the following items: - AppleApplicationSupport
SAMIA:
- AppleMobileDeviceSupport64
SAMIA:
- Bonjour64
SAMIA:
iTunes64
SAMIA:
SetupAdmin
SAMIA:
I selected Repair in all of them instead of Remove and all worked but iTunes64
SAMIA:
That's when I received the message that I sent you earlier.
SAMIA:
By the way, this is the fir st time something like this occured. I never had problems with installation before.
Rebekah:
I completely understand what you're saying. Since that Repair did not resolve the issue, our best option is to uninstall iTunes and its components and redownload it. To do this, we will follow the steps in this article: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Rebekah:
First, we will want to quit iTunes and/or Apple Software Update if those are open at this time.
SAMIA:
Rebekah, the instructions you gave says, "For Windows XP, follow these steps to remove and reinstall iTunes and other software components for Windows XP."
SAMIA:
I closed all applications
SAMIA:
Also, my iTunes doesn't open anymore after the new failed installation.
Rebekah:
The section that says "For Windows XP…" is in case we opened up the wrong article, as we have the one for Windows Vista, 7, or 8. There is a link to click ("these steps") in those directions that would take us to the article for uninstalling on a Windows XP.
Rebekah:
So no worries! We have the right article!
Rebekah:
On the computer, we will want to click on Start > Control Panel. In Control Panel, we will click the "Uninstall a program" link.
SAMIA:
I thought so after doing a little exploration.
SAMIA:
done
Rebekah:
Alright, we'll want to select iTunes from the list of currently installed programs. Then we will click Uninstall. When asked if you would like to remove iTunes, let's click Yes.
Rebekah:
After the uninstallation is complete, we don't want to restart your computer if you're prompted.
SAMIA:
Done
Rebekah:
Then if you see other iTunes entries on the list, we'll want to remove them the same way.
Rebekah:
Then we will remove all instances of Apple Software Update the same way you removed iTunes.
SAMIA:
Okay, but do I have to remoce iCloud as well?
SAMIA:
Rebekah, I received the same error message again when uninstalling
Rebekah:
We actually do not need to remove iCloud. After the Apple Software Update, we will want to remove all instances of Apple Mobile Device Support
Rebekah:
How strange! Are you able to click past that and allow the process to continue or has it stopped it completely?
SAMIA:
I am unable to uninstall iTunes either
SAMIA:
Stopped completely
SAMIA:
I treied clicking Repair
Rebekah:
Alright, after trying the Repair option, let's see if it will allow us to continue uninstalling or not.
SAMIA:
I tried that but unfortunately, it isn't working. I still get that same message with error code 2324.
Rebekah:
This error code is not something that I am finding in my sources, Samia. So there is a chance that it is being caused with the Windows computer itself. However, I did find a link that may be able to help with uninstalling iTunes from Windows' support site: http://support.microsoft.com/mats/Program_Install_and_Uninstall
SAMIA:
Rebekah, you're a genius! It worked! iTunes is no longer there. What next?
Rebekah:
Awesome! I'm glad that worked!
Rebekah:
To be sure I am on the same page, what was the last component we uninstalled?
SAMIA:
iTunes
SAMIA:
Shall I remove the Apple Application Support, Apple Mobile Device Support, and Apple Software Update
Rebekah:
That is correct! However, we do want to uninstall it in the order I mentioned above. So Apple Software Update first, Apple Mobile Device Support next, and then Apple Mobile Device Support.
SAMIA:
Got it, but is the second one to uninstall Apple Mobile Device Support OR Apple pplication Support?
Rebekah:
The second one is Apple Mobile Device Support.
Rebekah:
The Application Support will be the last component we uninstall.
SAMIA:
Thanks! I'm on it.
SAMIA:
Done! ll 3 are gone, well 4 with iTunes. Now what?
Rebekah:
Awesome! Also, I just noticed that I accidentally typed Apple Mobile Device Support twice, I do apologize for any confusion! Now we will remove all instances of Bonjour and then remove all instances of Apple Application Support.
SAMIA:
There was only 1 instance with Bonjour. I don't know what the instances are for Apple Application Support
Rebekah:
Yes, Bonjour is often only listed once. Is the Apple Application Support listed at all?
SAMIA:
No
SAMIA:
Since I removed it
Rebekah:
Oh, perfect! If it was removed, we should be set!
Rebekah:
We have removed iTunes and its components now! From here, our next step is to restart the computer. Then once you reboot, you can redownload iTunes from apple.com/itunes
Rebekah:
That should allow you to download iTunes!
SAMIA:
Shall I downloaad the latest vesion?
Rebekah:
You will want to first restart the computer as shown in the article. That will ensure that this process goes smoothly and that everything was removed correctly! Then you can try downloading iTunes again.
SAMIA:
Okay, thanks Rebekah!
Rebekah:
You're very welcome! I'm glad I could help! And of course if you have any issue after the reboot and download, you can always chat us back, as chat is open 24 hours! You will just need to give your case number and the next Advisor would have all my notes!
SAMIA:
Thanks again for all your help, for I couldn't have managed with out it. Have a nice day!
Rebekah:
You're very welcome! I know how important iTunes is and I'm glad we could get you on a path to resolution!
Rebekah:
I hope you have a lovely day!
Rebekah:
It's been a pleasure speaking with you! Thanks for chatting with us Samia. If you don't have any more questions, select End Chat from the upper left corner of the chat window.
SAMIA:
Will do, thanks.

TS3274 cannot access my settings, each time i try to access my settings, screen goes black.

I cannot access my settings, each time i try to access my settings, screen goes black.

You may want to try from A to D.
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(C) Reset all settings
Settings>General>Reset>Reset all settings
(D) Restore iPad
1. Connect your device to your iTune (computer).
2. Select your iPad when it appears in iTunes.
3. Select the Summary tab.
4. Click the Restore button.
Note: Data will be lost

From OverDrive Media consol, I need to sign into Adobe. It fails each time. Help

I have downloaded OverDrive Media Console ap, and need to log into Adobe, which fails each time. Help

In the past, you have had to re-authenticate your Acrobat.com account on update if you are using the Acrobat.com features. This is something we are working on and hope to improve in future updates. Thank you for the feedback.

My time machine will not back up. It says backup failed each time i try to back up. I tried switching it off but still nothing. It says "already in use" Please help!

My time machine will not back up. It says backup failed each time i try to back up. I tried switching it off but still nothing. It says "already in use" Please help!

The late James Pond left us these wonderful illustrated guides, including this one:
Time Machine - Troubleshooting
C12. "The Backup disk image ... sparsebundle ... is already in use."

Cursor freezes completely each time with mac os x 10.6.8

Hello, mac friends,
I have a Macbook Pro with 8Gb and upgraded from 10.6.3 to 10.6.8 recently.
All was well for some but since one week, the cursor freezes when I use either Safari or Mozilla, and and basically the whole system jams.
I cannot do force quit. Unplugging my mouse (logitech) or just using the trackpad works and I simply need to do a forced close down with the
on button in the right upper corner.
I have tried a PRAM reset, a Disk Utility with repair disk permissions and disk repair, and using Disk Utility through the Installer Disk but nothing
seems to help. I have upgraded both Safari and Mozilla, but still the same issue crops up.
What is wisdom here? Downgrade from 10.6.8 to a earlier version? Upgrade to LION? or set up a new user or admin account? I have seen various
threads on the internet but never a definite answer and someone content that his/her problem with the cursor freeze was resolved.
Please let me know - I think quite a number of other mac users have the same issue.
Thank you,
Saab96

I have a similar problem with my early 2009 Macbook Pro 10.6.8 and have been working on it for several weeks. Something is cuasing my mouse (USB or Logitech Wireless) to stop functioning normally. At first I thought it only happened after the Mac was asleep but it just happened again while I was using it.
I've cleaned house as far as possible potentially offending programs including getting rid of all browsers except safari.
Repaired Disk Permissions, Veryifeid the Hard Disk which had some bad sectors after 3.5 years of use. So I replaced the drive with a Seagate 750GB drive. Did a Time Machine recovery from a point in time prior to the problem ever occuring.
Relentless searched through the Console logs each time it happens but it does not seem to point to one thing.
Crash Reporter does not even pick it up and create a report.
I ran Memtest for hours two times and can find nothing wrong with the memory.
Reset the SMC
Reset the PRAM which if I understand it correctly also resets the NVRAM?
Yesterday I did a fresh install of Snow Leopard using the Archive and Install function to create a new system wothout nuking the drive and my USer/networksettings etc.
Ran updates on the system to get it back to 10.6.8
And it happened again. I clicked on a window and the "Select" function just hung so no mater where I moved my mouse it kept selected everything. It would not close windows or perform any mouse like functions.
The command-quit function worked this time and I can always open & run the Force Quit window and shutdown. It'sl like the machine is doing everything except mouse functions.
The "crash" does seem to affect my Parallels 8 virtual machine as I am able to quit W7 and shut down parallels normally.
I have over 2GB of free RAM out of the 4GB installed
Temperature Monitors seem normal.
I'm really starting to think its hardware....
I"m going to hard wipe the drive and do a clean install of Snow Leopard next and not install any third party programs whatsoever. But before I waste any more time on this if anyone has any ideas on this I would appreciate hearing them. Apple support has been giving me ideas and veyr helpful as usual but this isn't fixed and I can't live with it.
This machine never crashed. But since the last week in August it does this constantly at least a couple time a day.
Thank you for any assistance.

The bottom part of my iphone4 screen cannot tap.. restored 2 times with latest firmware and yet still the same..is it possible to fix this?how?

The bottom part of my iphone4 screen cannot tap.. I restored it 2 times with the latest firmware and yet still the same..is it possible to fix this?how? please guys help me =(

iPhone and iPod Touch: Troubleshooting touchscreen response: http://support.apple.com/kb/TS1827

Received notice from Apple to upgrade iTunes on my Dell PC running windows 7 Ultra. Update failed numerous times with error message R6034 Microsoft visual C error. Apple instructions to remove itunes and reinstall. Reinstall failed (same Err). HELP!

Received notice from Apple to upgrade iTunes with 11.1.4 on my Dell PC running Win 7 Ultra.During upgrade got error message R6034 several tries (app's attempt to load C runtime library incorrectly in Visual C + + runtime library). Apple's suggestion to uninstall iTunes and reinstall with ver. 11.1.4. Tried that, it failed too. Now have no iTunes, think I have lost all saved podcasts and music, and get no help from Apple. What to do?

Try this: Troubleshooting issues with iTunes for Windows updates.
tt2

My acrobat continually asks me to activate it. I go online but it fails each time trying to activate I entered the licence key with the disk but it still says 30 days only

I am told this is a problem with the Acrobat 7 and there was another site with a new activation code that stops this but I am unable to find it perhaps someone could help with this issue.

Hello davida64000854,
Could you please tell me the version of OS on which you are trying to activate Acrobat 7.
Also, please share the screenshot of the error message that prompts on your screen.
You might also refer the following KB doc link mentioned below:
Error: "Activation Server Unavailable" | CS2, Acrobat 7, Audition 3
Let me know if this helps.
Regards,
Anubha

Upgrading microsoft office each time i sync my ipad with my macbook pro?

when I sync my iPad2 on my Mac Book Pro it appears a window of Microsoft Office saying that is upgrading the identity... sounds strange!

If you've been syncing photos to the iPad then try deleting the photo cache from your computer and then re-try syncing - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

Update to windows 8.1 fails every time with error 0x80004005

Like many others trying to install the update (windows 8.1 via Windows Store app), I keep getting the same error code (0x80004005) in the last stages of the update.
I have successfully installed the update on 3 systems without a hitch - 2 desktop pcs and one laptop. However, when I try the same process on my HP Presario G6 I get the same error code every time: I have even reformatted the hard drive and reinstalled
Windows 8 Pro from scratch, but I get the exact same result. And, yes, I have installed every update available from Windows Update before attempting the update to 8.1.
I have a Standard installation, except I have my user files on a separate partition ( documents, pictures etc) Also I have a third partition for keeping backup copies of installed software. The System Reserve partition (200mb) has no drive letter
assigned and is the active partition.
Surely someone at Microsoft understands why this problem is affecting so many users. Please tell us the solution.
System spec: HP Presario G6 1253sa, Intel I3 M370, 8gb DDR3 ram, Windows 8.0 Pro with MC.

Hi,
From the error code 0x80004005, it is relate with Windows updates. What does your mean by last stages of the update? Is it during the updates download? Or during the update installation, configuration?
Actually, if you encountered this problem when you download this update, you can check Windows update log to find some trail.
If this error occurred during Windows install, please check setupact log in C:\Windows\Panther. You may find the reason for this problem.
In addition, as you said, you have change your user location, may be this is a reason, you can try to not make any change after Windows 8 fresh install, then upgrade to Windows 8.1 for test.
Roger Lu
TechNet Community Support

Photoshop Elements 9 update to 9.03 fails each time

When i open Elements to work with photos I often receive a notice that there is an available upgrade. When I run the upgrade it appears to download OK but the installation fails.
"Some updates failed to install" "patch cannot be applied. Please contact customer support"
Anyone know what to do? I have found contacting customer support isn't exactly easy.

Please download update patch manually from : http://www.adobe.com/downloads/updates/ and try to install it on your computer.
Select the product from the dropdown menu and search for the update which you want to install.
Regards,
Jatin Dembla

SMTP send fails first time with exchange server. how about you?

I run a 2007 Exhcange server at our business...never an issue with OSX working with it.
Now that I've upgraded to mavericks anytime I have an attached of any good size (screenshots, photos) it fails the first time...and when I try to resend it goes. This issue doesn't exist with small attached (signatures for example) or blank emails.
Anyone have this issue with Maverick/Mail.App?
Before you start to tell me that I need to increase the attachment size on my exchange server it already permits up to 99,999KB and if it was being blocked due to size the 2nd attempt would not work either.

Ok, so I've gotten Cups and wicd autostarting, set the static ip from my router because else it wasnt getting DNS etc details and left it asking for that by dhcp.
Still having issues with the DE
pedro_sland wrote:
If DE is required, Xorg must be started in tty1, startlxde ran in tty2, and then manually switch to tty7 for the DE.
I run xfce4 sometimes. I just run startxfce4 and it starts Xorg and displays the DE. I think that startx runs twm which you probably don't want so you might want to take a look at that. startx has a script it runs somewhere (I forget where but the wiki will know). When I'm done with xfce I just log out and it exits.
For me, this isnt working. startlxde on its own just goes to
[root@yomiko ~]#
in tty1, and leaves me with a blank screen when i switch to tty7
I literally must call Xorg in one tty, startlxde in another and then manually shift to tty7 to see it.
startx itself:
-bash: startx: command not found
Even Xorg isnt happy being called on its own, that too goes to a blank screen, though it does at least switch to tty7
With Xorg called in tty1, when i call startlxde in tty2 i get dbug errors from pcmanfm though these seem to be just it informing its detected the HDD partitions.
there is a grumble early on in the process, before the debug errors, saying:
Importing pynotify failed, notifications disabled.
Finally, I did add the line to .xinitrc the LXDE page in the wiki said to to allow startx to run:
exec ck-launch-session startlxde
This is the only line in this file.
Currently running as root... I'm not going to complicate matters by adding a user until im sure i got it all running as root, bad practice or not!
Edit: A friend helped me solve it.
The package xorg-xinit held the startx script that was missing. I now get LXDE when i want and only when I want.
Last edited by Rhiadratech (2011-05-20 23:09:16)

How to run the same SSRS report multiple times, each time with a different parameter value?

Hi,
I have an SSRS report that produces a list of invoices for a single supplier (so supplier is a parameter specified at runtime). The report is based on a stored procedure in SQL. I would like to make things easier and instead of going through all suppliers
one by one, I want to have a single action, which produces separate reports, per supplier, for all suppliers that have an outstanding invoice (so not all suppliers on the system as a whole but all suppliers that are within the result set of the stored procedure).
I assume this would mean first executing the stored procedure to find all suppliers that have invoices at the time. And then running the report multiple times, once for each supplier, where the supplier value is used as the parameter every time. ideally
this would open separate webpages with a single report per page. (I am creating a button in another software, which is simply launching iexplore.exe and passing a
fixed SSRS report URL).
What would be required? I have SQL 2012 and I am building this in Report Builder 3.0.
Thank you!
Dimitar
P.S. What about still running ONE report, but every supplier starting on a new page? Is that more realistic? So supplier will not be a parameter any more, but just something that creates a new page on the report?

What
about still running ONE report, but every supplier starting on a new page? Is that more realistic? So supplier will not be a parameter any more, but just something that creates a new page on the report?
Yes thats a much better option. Its very easy to generate such a report in SSRS. You dont need a parameter
in that case but just needs to add Supplier as a grouping field in the tablix. Then add other columns and groups if required. Select option set page break after each instance of the group for first grouping (ie based on supplier field). Then report will render
with one page per supplier. On exporting to excel also each supplier data goes to a different tab
Here's a similar requirement I did for one of my projects
http://visakhm.blogspot.in/2013/10/using-ssrs-to-export-sqlserver-data-to.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

I am trying to update Firefox 3.6.8 to the most current version on my Mac but it fails each time. Help

I am able to download the newest version but it will not direct me to the 2nd and 3rd steps. Looking at the history, it has also been failing security updates since March of this year.

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
*https://support.mozilla.com/kb/Installing+Firefox+on+Mac

Cannot upgrade. I fail each time with Code 1638 .

Similar Messages

Maybe you are looking for