Cannot upgrade my Power Mac G5 Dual Processor (CPU type: PowerPC G5 (3.0)) to Mac OS 10.4 - anybody knows how to do this

Trying desperately to upgrade my Power Mac G5 Dual Processor to Mac OS X.4 - what kind of upgrade is needed? How may I proceed?

Hello Jens,
Might be easier to get Leo/10.5.x
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
old: http://discussions.apple.com/thread.jspa?messageID=9755670&#9755670
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
You have to call Apple & likely ask for a Product Specialist to get it, if they still have it! Helps to tell them you have an iPad/iPhone & you can't run 10.6.

Similar Messages

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via minidisplay port. Anybody knows how to fix this?

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via the minidisplay port. Anybody knows how to fix this?

Was just on the phone with Apple about this.
The solution was as follows for me anyway...
Go to your Finder
Choose the Go Menu
Choose Computer
Choose your Macintosh Hard Drive
Choose your "Library" Folder
Choose the "Preferences" Folder
There should be a folder called "Audio"
Move that whole folder to the trash
Empty the Trash
Restart from the Apple Menu
When you are back up and running;
     Choose System Preferences from the Apple Menu
     Choose Sound
      In the output tab you should now be able to make the HDMI "Sticky"
      Enjoy your sound over HDMI and no more dirty knees or broken backs unplugging the desktop speakers!
Mac Mini 2011 2.5Ghz 8 GB of RAM - Planar 17" VGA via display port adapter and Samsung 26" LCD TV via HDMI

I have somehow started getting bing instead of google as my search engine for my mac air. does anyone know how to remove this?

I have begun having bing as my search engine instead of google on my mac air. I have no idea how this happened and wish to remove it but am stumped. Has anyone had experience with this?

You may have installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there should be an item named "Genieo". Select it and open the Finder Info window. If it shows that the Version is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you couldn't complete Step 1, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. It must be said that this failure of oversight is inexcusable and has seriously compromised the value of Gatekeeper and the Developer ID program. You cannot rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the developer sometimes shows up under the name "Genieo support." If that happens, don't believe anything he says, but feel free to tell him what you think of his scam.

I have made the switch to MAC from PC and I use Sony cameras/video recorders. I used the Sony PMB program to store all photos and videos. Now I need to transfer my photos and videos over to my MAC and I do not know how to do this as PMB is not supported

I need to transfer all my photos and videos from my old PC stored in the SONY PMB program to my new fabulous MAC desktop. I do not know how I can do this. Plus for future photos/videos, how can I upload them from Sony products ?
Please help me
PS I just purchased the computer yesterday so it has the most current operating system

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Do you know where the actual photo files are located on your laptop? If so, you can transfer them to the Mac over a LAN or by saving them to an external HDD, thumb drive or burning them to a disk. Then you can import the photos to the iPhoto app that came on your new Mac.
It would be the same process for the videos, however, it would depend what type of video files they are, as to which Mac app might allow you to view them.
BTW, since your Mac is new you need to Accept the iLife apps; iPhoto, GarageBand and iMovie into your Mac App Store/iTunes account. Open the MAS, sign into you account, go to the Purchased pane and accept the apps.

I cannot access my mail from my ipad. I keep getting an error message "MFMessageErrorDomain error 1032". Does anyone know how to fix this?

I cannot access my mail from my ipad. I keep getting an error message "MFMessageErrorDomain error 1032"

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom
Tap Settings > Mail, Contacts, Calendar and delete your email account.
Then tap Settings > Safari > and Tap Clear History and Clear Cookies and Data.
Now tap Settings > Mail, Contacts, Calendar and re-enter your email account credentials.
Message was edited by: Texas Mac Man

I recently upgraded my apple TV software and now it doesn't work, does anybody know how to fix this problem?

Apple TV no longer works after I upgraded the latest patch. It shows a picture of the USB plugging into iTunes but doesn't do anything. Can anybody tell me how to either reset Apple TV or explain how to get it working again?
Thanks!

You need a microUSB cable to connect to computer running iTunes (no other leads). See:
http://support.apple.com/kb/HT4367

Help with upgrading my Power Mac G4

Hello,
I've found many topics in this forum helpful, but they are so spread out that I figured it would be easier to ask for help for my own computer.
I am interested in upgrading a few things on my G4. Here are my specs:
Machine Name: Power Mac G4
Machine Model: PowerMac3,5
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 1
CPU Speed: 867 MHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 1.5 GB
Bus Speed: 133 MHz
Boot ROM Version: 4.2.5f1
1) Upgrading my processor:
I do a lot of graphics work (Photoshop, Flash, Illustrator, and Maya) on my computer and it's been really slow lately, even with my RAM maxed out to 1.5 MB. I was thinking of buying the SonnetDUAL G4/1.8GHz 512K L2 Cache Per Processor because I would like as much processing power as possible. What processor(s) would be the best fit for me?
2) Upgrading my graphics card:
I don't know anything about increasing my graphics card capabilities, or if I even need to. Does anyone have any suggestions for me? Here are my current graphics stats:
NVIDIA GeForce2 MX:
Chipset Model: GeForce2 MX
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 32 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0110
Revision ID: 0x00b2
ROM Revision: 1055
3) Upgrading to a USB 2.0 PCI card:
Is this necessary? I was interested in purchasing a Firewire/USB hub and that's when I learned of the USB 2.0 thing. I don't know if I need it or not.
4) I just bought a 400GB external FW HD, but is it also recommended to buy a second internal hard drive? I'm leery of buying one because I'm not very computer HW savvy (surprise surprise!) but I'm wondering if it would be good for my computer considering its age and how much I use graphics software on my computer.
Thanks for any help you can give.
Power Mac G4 Mac OS X (10.4.5)

Hi there,
You have a very upgradable computer, one of the best. You didn't tell us your budget. So, I'll just assume you want to be practical.
1. I'd suggest either a Fastmac or OWC CPU. Easy to install, no firmware patches to add, simple and very fast.
2. Stay put for now, see how you like the CPU first.
3. If you need it look here. The sleep issue is one that cannot be remedied, so we live with it. I put my monitor to sleep and set the computer to never.
4. The FW 400 is perfect. If you are worried about the old internal HDD, install a second new one (128GB or less) internally and use it as your startup, the old one for storage of non essentials. No matter what you do, ALWAYS backup important data at regular intervals.
Finally, your Mac has 1.5GB of RAM already installed, you're set!
Regards,
Dave
QS-1.5GHz, ATI 9800/ AGP-1.25 GHz, ATI 9800/ Cube-Dual 1.7 GHz, ATI 9800 Mac OS X (10.4.4)

How can I install Tiger upgrade on Power Mac G5?

I have PowerMac G5 with OSX 3.9. I bought retail disk of Tiger but it will not install as upgrade. It goes past the restart process but stops shortly after installation begins with message telling me that installation failed. I originally bought Leopard and encountered same problem and then bought Tiger thinking that I might need to upgrade to that first. Here are the specs for my computer:
Machine Model: Power Mac G5
CPU Type: PowerPC 970 (2.2)
Number Of CPUs: 1
CPU Speed: 1.6 GHz
L2 Cache (per CPU): 512 KB
Memory: 2.25 GB
Bus Speed: 800 MHz
Boot ROM Version: 5.1.5f2
Serial Number: XXXX
GeForce FX 5200:
Type: display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 64 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0321
Revision ID: 0x00a2
ROM Revision: 2060
Thanks much!

Hi Mobe!
Is the disc the Full Retail Version, of the Tiger Install DVD, that does not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on it?
If not, you can order the correct Tiger 10.4.x installer from Apple Phone Sales 1-800-692-7753, for $129.00.
That model of PowerMac G5 should also support the Leopard System Requirements, if you use a Full Retail Version of the Leopard DVD.
The Full Retail Version, of the Leopard Install DVD, can be purchased at The Apple Store (U.S.).
ali b

I want to upgrade my Power Mac G5 Quad (Mac OS X 10.5.8) for video editing purposes. What upgrades should I make?

Hello!
I want to upgrade my Power Mac G5 Quad (Mac OS X 10.5.8) for video editing purposes.
Rendering,editing and exporting takes some time on my computer. I just want things to go faster.
What upgrades should I make?
Thanks in advance!!!

Here are other video cards that you can search for that will also work in your G5.
NVIDIA GeForce 7800 GT with 256 MB of GDDR3 SDRAM, and NVIDIA Quadro FX 4500 with 512 MB of GDDR3 SDRAM
http://www.amazon.com/nVIDIA-Quadro-FX4500-PCI-Express-631-0110/dp/B004XCYG10/re f=sr_1_3?s=electronics&ie=UTF8&qid=1365657320&sr=1-3&keywords=NVIDIA+Quadro+FX+4 500
or
http://www.amazon.com/Power-Nvidia-256mb-Geforce-Express/dp/B00BL30JQU/ref=sr_1_ 3?s=electronics&ie=UTF8&qid=1365657552&sr=1-3&keywords=NVIDIA+GeForce+7800+GT

Upgrading a Power Mac from a PowerBook?

I'd like to upgrade my Power Mac from Panther to Tiger, and have recently purchased a PowerBook that came with Tiger (gray 10.4.2 discs). I gather from physically trying it, then searching this list, that the grey discs won't work. What I've not seen addressed is whether it's possible to get Tiger on the Power Mac directly from the PowerBook?
Thanks.

Correct. The discs that come with a specific model are only usable on that model. You would have to purchase a retail version of Tiger on eBay or from FastMac.com or by calling AppleCare and ordering a copy (it may be several weeks delay.)
If you were to clone from your other computer you'd have the same problem. The installed version of Tiger from the gray discs also will not work on your other computer for the same reason the installer doesn't work.

Since upgrading to IOS 8.1.2, I cannot send/receive emails from either of my Apple or Verizon email accounts. Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

Since upgrading to IOS 8.1.2 on my iPad3, I cannot send/receive emails from either of my Apple or Verizon email accounts. I confirmed that my internet connection is working. Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

Hi Milrclan,
Thanks for contributing to the Apple Support Communities.
If you're not able to send or receive email from the mail accounts on your iPad after updating iOS, start with these troubleshooting tips:
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Best Regards,
Jeremy

I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however i

I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however it is asking for my serial number which I have misplaced. I am unable to trace my serial number anywhere. I have even checked my adobe membership to locate my serial number but it does not seem to have any record which is strange as I have been using this software for over a year now and the previous versions since 2009. Could someone help me in my predicament.

Contavct Adobe support thru chat:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?

Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?

Paragraphs help the reader, just saying.
What are you actually trying to do? Why do you need "DVD size" folders if you're creatng an Archive on an external hard drive?
Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD.
It makes no difference at all.
How can I keep the captions on my photos (not events) when I print or transfer to a new folder?
You can export while writing the metadata to the file in most cases.
Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size.
HD? Another HD? You use HD there in a way that makes no sense. What's the point of 'DVD size'?
I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?
Does this have any relation to the previous questions? You know you can delete from iPhoto, right?
You're somewhat confused and you need to
1. Decide what exactly you want to do
2. Then go about it.
If I understand you correctly - and there's no guarantee that I do - the easiest thing is to bring all your Photos into iPhoto and do everything from there.
You can have an archive on an external disk, you can sort and select and edit with or via iPhoto
Regards
TD

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Mach

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

http://support.apple.com/kb/TS2986

When my desktop (Mac Power 5) starts a folder comes up with 2 heads which changes to a question mark. Does anyone know how to fix this.?

My Husband turned his desktop off without shutting down now When my desktop (Mac Power G5) starts up a folder comes up with 2 heads which changes to a question mark. Does anyone know how to fix this.?

Step 1- Try booting to Startup Manager by holding Option/Alt key.
Select the boot source and click the right arrow.
Once booted, open System Preferences and select the desired boot volume.
Replacing the PRAM battery is likely wise if the machine keeps forgetting it's boot source.
If that doesn't work,
Step 2- Boot holding a mouse click, insert the OS X install disc and hold C to boot to the install disc.
Once booted, open Disk Utility and "Repair Disk" on the boot drive.
Once done, reboot normally.
More:
http://support.apple.com/kb/TS1440

Cannot upgrade my Power Mac G5 Dual Processor (CPU type: PowerPC G5 (3.0)) to Mac OS 10.4 - anybody knows how to do this

Similar Messages

Maybe you are looking for