Cannot upgrade sensor errTransport-Application

Hi guys:
I'm about to made an upgrade on a sensor but when I try to do it i got an error message like this
"cannot upgrade software on sensor, errTransport-Application processing the request respondend unexpectedly"
Is it something about a connection problem? or maybe something else.
I want to made an upgrade on my sensor with the version 5.0 to 7.0.5a-(E4).
Regards.

Here you go, upgrading through CLI:
http://www.cisco.com/en/US/docs/security/ips/6.2/installation/guide/hw_system_images.html#wp1088688
Otherwise, if you don't have much configuration on the IPS then just proceed to reimage directly to version 7.0. It's probably the easiest so you don't have to perform the upgrade twice.
But it will wipe out the configuration including the ip address on the IPS.
Here is the reimage steps if you are interested:
http://www.cisco.com/en/US/docs/security/ips/6.2/installation/guide/hw_system_images.html#wp1030825
(just go to the section of your respective IPS model).

Similar Messages

I have an old iMac version 10. 4.11 and I have the iPhone 3GS which I cannot upgrade the latest applications I want to buy the iPhone 4S but I need to back up all the information on my iMac and move it to a different computer contacts songs etc which is t

I have an old iMac version 10. 4.11 and I have the iPhone 3GS which I cannot upgrade the latest applications I want to buy the iPhone 4S but I need to back up all the information on my iMac and move it to a different computer contacts songs etc which is the easiest way to do this

Glenn,
I tried upgrading to leopard, even bought the software and brought it home but it wouldn't let me. So i went back to apple, gave them the specifications of the machine and been told my machine is simply too old for leopard. This is incredible to me because it really isn't THAT old (i think just a little over 6 years maybe) and yet i'm left out on the curb when it comes to using newer apple products. I understand technology moves on but the mindset that i am supposed to dump a perfectly working machine after a couple of years or face not being able to use any other apple product is counter to what thought apple was about.

Cannot upgrade applications - get error about permissions

Hi Everyone,
since upgrading to 10.7 I cannot upgrade any application without the same errormessage.
I try to upgrade the application, tell the system to replace the existing application, give it the admin credentials, .. and get the error message that the task cannot be finished, some objects were omitted... Please check Permisions...
All Permissions should be ok. I did the permissions check and repair without solving the problem.
As Workaround I have to delete the old application and then install the new version... but this is strange and I cannot understand this.
Did anyone else have the same issue? Anyone have a solution or hint?
Thanks -:)

Boot up holding command-r keys into Lion Recovery Volume.
The screen should give you these choices...
Restore from TM backup
Reinstall Mac OS X
Get help online
Disk Utility
Choose re-install OS X. This will be an install "in place" and shouldn't effect any of your data, only system files.

I'm using a 15" Macbook Pro running OSX6.8 and cannot upgrade. I have a subscription to Adobe CC but none of these work on this so I was on with Adobe for 5 hours trying to install and launch Illustrator, InDesign, Photoshop, Muse, and Acrobat Pro from CS

I'm using a 15" Macbook Pro running OSX6.8 and cannot upgrade. I have a subscription to Adobe CC but none of these work on this so I was on with Adobe for 5 hours trying to install and launch Illustrator, InDesign, Photoshop, Muse, and Acrobat Pro from CS6. Well, InDesign is the only one that works and I have a ton of work due! I don't have a serial number for Photoshop or Illustrator except for CS3, and they don't work. InDesign gave me no problems. Illustrator says it can't work on this machine. Photoshop needs a serial number. I'm stumped and getting anxious and freaked out. Can anyone help? Adobe Chat is down right now.

if you have a cc subscription, close ps > sign out and then back in to your cc desktop > open ps.
ai cs6 requires:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X v10.8 and v10.9 when installed on Intel-based systems.*
2 GB of RAM (8 GB recommended)
2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024 x 768 display (1280 x 800 recommended) with 16-bit video card

Still cannot upgrade iTunes

This is an update to an earlier question I had posted.
I desperately need help!
I have a Dell Inspiron 1525 laptop with Windows Vista 32-bit and a 2nd generation iPod touch running iOS 3.1.3 (7E18). However, I would, obviously, like to upgrade to the latest iPhone OS.
The problem? I can't.
Ever since iTunes 9 came out, I have been unable to successfully upgrade iTunes. I can only get up to version 8.2.1 to work on my computer. The install will appear to go fine, but I'll get various errors and even after getting a "iTunes was successfully installed" finish window, get an error saying that iTunes cannot open because Apple Application Support was not found, even though Apple Application Support installs as part of the iTunes install for iTunes 9 and higher. I also get an error trying to update via Apple Software Update.
I have literally tried every single thing I can think of or find online, including the "trouble installing iTunes" troubleshooting instructions on Apple's website. I am not sure I can take this to Apple for repairs because my iPod is out of warranty. Plus I have a PC, not a Mac. I did call a nearby Apple Store to see if I could bring it in, only to be told they don't work on PCs. The guy then asked what my issue was, and I told him. He told me to try Googling it, which of course I have already done -- many, many times.
To prove my claim is real, I have been making screenshots of all my errors. Here they are:
When installing iTunes from the website or from a prompt within my current iTunes version, after a bit I tend to get this error:
http://img.photobucket.com/albums/v328/Dani17/iTunes%20Upgrade%20Error%20Screens hots/ituneserror1.png
I click ok, the install continues, and then on occasion I have gotten this error:
http://img.photobucket.com/albums/v328/Dani17/iTunes%20Upgrade%20Error%20Screens hots/ituneserror2.png
I click out of it, the install continues, and then when it's almost to the end, it tends to stall:
http://img.photobucket.com/albums/v328/Dani17/iTunes%20Upgrade%20Error%20Screens hots/itunesstall.png
http://img.photobucket.com/albums/v328/Dani17/iTunes%20Upgrade%20Error%20Screens hots/itunesstall2.png
Once recently while it was stalled, I got this error:
http://img.photobucket.com/albums/v328/Dani17/iTunes%20Upgrade%20Error%20Screens hots/applemobiledeviceerror.png
(I should mention, in relation to this error, that I am the only user of the computer on which this is occurring, and I do have admin privileges on it).
Yet after all that, I still get this happy screen:
http://img.photobucket.com/albums/v328/Dani17/iTunes%20Upgrade%20Error%20Screens hots/itunescongratsinstalled.png
I click "Finish," only to get these errors:
http://img.photobucket.com/albums/v328/Dani17/iTunes%20Upgrade%20Error%20Screens hots/ituneserror3.png
http://img.photobucket.com/albums/v328/Dani17/iTunes%20Upgrade%20Error%20Screens hots/ituneserror4.png
As I've said, I've tried everything. Someone suggested I install QuickTime separately, which I did recently, only to get this error:
http://img.photobucket.com/albums/v328/Dani17/iTunes%20Upgrade%20Error%20Screens hots/quicktimeerror.png
And as I said before, trying to do the update via Apple Software Update doesn't help either:
http://img.photobucket.com/albums/v328/Dani17/iTunes%20Upgrade%20Error%20Screens hots/ituneserror_applesoftwareupdate-1.png
What should I do???

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up +en passant.+
Go into your Windows update and try to check for new updates. Do they fail to install? If so, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you?

HT1338 I cannot access my iphoto application on my imac as it says I have made changes in Iphoto using a newer version. We have recently purchased a Macbook Air and this has Lion (as opposed to leopard on the iMac) and we are sharing photos between the 2?

I cannot access my iphoto application on my imac as it says I have made changes in Iphoto using a newer version. We have recently purchased a Macbook Air and this has Lion (as opposed to leopard on the iMac) and we are sharing photos between the 2. I am awaiting the upgrade discs for snow leopard and then to Lion for the iMac but is there a way to access my photos until this arrives?

Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Installer Error: Cannot Upgrade NI-488.2

Hi all,
I recently created an installer for one of my LabVIEW programs, and when I ran the installer on another computer I recieved this error:
"Installation Cannot Proceed: Cannot upgrade NI-488.2 : This installer cannot upgrade the installed feature set of NI-488.2 prior to 14.0. Uninstall NI-488.2 then run this installer again. This process will remove NI-488.2 Configuration support and Application Development support (if present)."
Can someone help elaborate on this error, and is there is there a way to not force an uninstall for someone who may have the driver(s) previously installed?
I'm new to building applications so I appreciate any help!

I'm including it because I won't know which customers will have it and which ones will not, so I assumed it would be safer including it in the installer.
However, since I'm new to LabVIEW installers I wasn't aware that this could present a problem for users who already have the driver installed. Would you then suggest leaving it out and letting the cusomers know elsewhere that they need to install it (as a consequence of not being able to opt out of the driver) vs forcing them to unistall to properly run the installer?
Thanks
Josh

Cannot upgrade aperture from 3.0 to 3.1.3

I cannot upgrade aperture from 3.0 to 3.1.3. The 3.0 was initially purchased as a download from the old Apple Store. Now it does not seem to recognise this version when I want to upgrade: "this upgrade requires Aperture 3"... which is ecactly what I have (and purchased!).

OK, got it solved:
Re: Aperture 3.0.1 upgrade claims I don't have Aperture 3.0 installed
Feb 24, 2010 2:15 PM (in response to civilpooch)
The Aperture file you are upgrading must be in the root Applications folder AND the file must be named (exactly) "Aperture" (no quotes). If you've renamed your Aperture file to "Aperture 3" or something like that, the update will fail. Mark

Since I uploaded the new OS X Mavericks the App Store, Messages, Notes, Calendar, Maps and Preview will not launch/open. In Finder cannot find my files. Most crucially cannot upgrade OS X Mavericks software. I had two apple ID's, the old one not used

Since I uploaded the new OS X Mavericks the App Store, Messages, Notes, Calendar, Maps and Preview will not launch/open. In Finder cannot find my files. Most crucially cannot upgrade OS X Mavericks software. I had two apple ID's, the old one not used

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Protection Error - This application cannot continue because another application with an identical serial number is already running on another computer on your network

I attempted to open Final Cut Express this morning and got the message, "Protection Error - This application cannot continue because another application with an identical serial number is already running on another computer on your network".
I have no other FCE on any computers...this is the only mac running (iMac 2008 model). I used a preference manager app and deleted preferences...didn't work. I uninstalled and reinstalled FCE...didn't work.
This is the first time I have used FCE since installing the Yosemite OS, so I'm thinking perhaps that has something to do with it.
Any ideas?

There have been recent posts appearing about your problem. I'm not sure if anyone has found a solution.
FCE was abandoned by Apple years ago, and they are currently making Operating Systems without regard to how it impacts FCE.
countrynewsman wrote:
I uninstalled and reinstalled FCE...didn't work.
That is what I would try - a fresh install - but your need to use FCS remover (from the same software source as Preference Manager) to make sure you get all traces of your existing installation off the drive prior to doing the installation:
http://www.digitalrebellion.com/fcsremover/
If you use FCS Remover, and reinstall the other problem may be that Apple has apparently removed the Software Upgrade to FCE 4.0.3.
So unless you have a 4.0.3 install disk, or you hadn't upgraded past the version number of the install disk you do have, you legacy projects may be tagged as being created with a later version than you have and not open.
Hope it works out for you.
MtD

Cannot start the source application for this object - Embedded PDF in Excel 2007

I am having a real issue which unfortunately is intermittant and I cannot pinpoint what is causing the problem. Basically I am inserting a PDF object into an Excel worksheet and immediately after I insert it, it will open fine. If you click off into another cell and save the sheet, then try to reopen the embedded PDF, you get the error "cannot start the source application for this object".
Any help would be very much appreciated! Has anyone else run into this?

I got that problem with one of my client after updating from Adobe Reader 8.2 to 9.3.1. Excel version was 2002 and not 2007 but this is Adobe problem.
Check that registry key for you Acrobat Document key points to right AcroRead32.exe path at HKEY_CLASSES_ROOT\CLSID\{B801CA65-A1FC-11D0-85AD-444553540000}\LocalServer32
of whatever key points to your Acrobat Document.
I used Sysinternals Procmon to monitor registry activity and found a line and opened that registry location and found out Adobe Reader 8.0 path there.
9:55:56,9021789 EXCEL.EXE 3236 RegOpenKey HKCR\CLSID\{B801CA65-A1FC-11D0-85AD-444553540000}\LocalServer32 SUCCESS Desired Access: Maximum Allowed
I have seen that Adobe Reader 9.3 doesn't update that registry and leaves Adobe Reader 8.0 values there. Same problem may be in other upgrade scenarios too.
In addition to that my Windows 7 with Office 2007 that has never had anything but Adobe Reader 9.x versions didn't had anything on that registry location and it gave me same "cannot start the source application for this object" error. Putting that path "C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe" to LocalSever Default value fixed that too. Maybe Adobe should do something with this issue?

I removed Microsoft Office 2008 but still get Microsoft Autoupdate for it. I can't complete the upgrade because the application is gone. Is there a trace of Office 2008 somewhere creating this problem?

I removed Microsoft Office 2008 but still get Microsoft Autoupdate for it. I can't complete the upgrade because the application is removed, but cannot make the auto update prompt go away either. Is there a trace of Office 2008 somewhere creating this problem and how do I get rid of it?

Thanks for the tip. Went through the process on Microsoft's site and the files that were causing the issue were the com.microsoft files in Library-Preferences. Removed all of those, then opened an Office 2011 application; had to go through some basic setup questions the first time, but I no longer get prompted upgrade 2008.

I currently have an I5 and as with the previous I4, both buttons have failed and now my battery lasts almost six hours if I don't use it. I cannot upgrade my phone until March, 2015 even though I recently upgraded my phone to the More Everything Plan. Am

I currently have an I5 and as with the previous I4, both buttons have failed and now my battery lasts almost six hours if I don't use it. I cannot upgrade my phone until March, 2015 even though I recently upgraded my phone to the More Everything Plan. Am I destined to be a nonuser for three months until I can upgrade. This is very unacceptable as I've been a Verizon Wireless customer for probably 20 yrs!

As a 20 year customer of ours, we certainly appreciate your loyalty Richey_Rich. I know the importance of ensuring you have a properly operating phone. Can you please clarify which button on the device is not working? Is there any physical or water damage to your phone? Any applications that stay running?
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

I cannot upgrade my 3GS to iOS 5, even though I have upgraded my pc woth iTunes 10.5

I cannot upgrade my 3GS to iOS 5, even though I have upgraded my pc woth iTunes 10.5

As a 20 year customer of ours, we certainly appreciate your loyalty Richey_Rich. I know the importance of ensuring you have a properly operating phone. Can you please clarify which button on the device is not working? Is there any physical or water damage to your phone? Any applications that stay running?
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

I cannot upgrade two Design Premium Suites from 5.5 to 6.0

I cannot upgrade two Design Premium Suites from 5.5 to 6.0!
I have a Volume Licensing for several Adobe Products and now I want to upgrade two of the Design Premiums to 6.0. I have bought two Retail upgrades (with a little discount) but this not going to work.
The Support help Chat says that I cannot use a Retail Upgrade for a Volume Licensed Design premium.
Why? I haven't found any info about this. So after two hours a chatting with several persons at the Helpdesk I was provided with a phone number.
When I called this Phone Number they said my serial was not connected to my Account. Unbelievable because in my Account there are all the right Numbers.
This man said I had to call another number 08004438158 to solve my Problem. Connect to this Number is Impossible (not reachable)!
What to do? I cannot solve this problem with the Support Chatbox,
I cannot solve this with a support employee on the Phone and another Phone Number is not reachable.
I have paid a lot of Money throughout the years with Adobe Products. We are running 7 Design Premiums, Several Photoshops, several Adobe Servers Applications and two prescriptions of the CC.
And now nobody can help me with this problem????

Thanx Mylenium for your Suggestion .
Today I have done another attempt by Phone. From the Netherlands Customer Service I received a different telephone number for Support. It took a while this Morning and a little patience but at last I received two unlocking Codes. So I didn't need to start an Online Support Case.
Regards,
Jan

Cannot upgrade sensor errTransport-Application

Similar Messages

Maybe you are looking for