Cannot upgrade to win 8 pro on thinkpad twist

I just bought a thinkpad twist with windows 8 and seperately purchased windows 8 pro pack. However the pro install gets to 15% and then fails. People with the lenovo yoga 11 and yoga 13 are having same issue. Microsoft support has not been able to come up with a soluion. Anyone here with similar issue? Any solutions?
Solved!
Go to Solution.

I got it to install with help from MS support. Here are the steps:
1. Search for "msconfig" and start the app.
2. Under the general tab select "diagnostic startup".
3. click OK.
4. Restart machine once.
5. After restart. Initiate windows upgrade.
6. After successful upgrade, return to msconfig and reset setting to "normal startup".

Similar Messages

Satellite L870-19N - cannot upgrade to Win 8.1 - 0x800706BE - 0x2003

My notebook runs a Windows 8 and I can not update to 8.1.
I tried 3 times and the configuration process stops at 83% and then the Windows 8 is restored
The "error" code is 0x800706BE - 0x2003
Any help?
Thanks

Hi
The Windows 8.1 upgrade could fail if installed Windows 8 system isnt up to date.
I recommend you to check for available Win 8 updates (control panel -> system -> Windows update)
You should start with Win 8.1 upgrade only when all patches for Win 8 would be installed

X130e - cannot upgrade to Win 8

Hi - looking for some help here. I am unable to upgrade my x130e to Windows 8, as the Win 8 upgrade advisor says my laptop does not support UEFI secure boot. I checked the support section for the x130e, but there is no recent bios update. The x131e appears to have a new BIOS update that was released to support Win 8, but nothing or x130e.
Also the x130e is on the list of Lenovo Win 8 upgradeable laptops : http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?DocID=HT074688
Appreciate if anyone can help with this. Thanks.

I got it to install with help from MS support. Here are the steps:
1. Search for "msconfig" and start the app.
2. Under the general tab select "diagnostic startup".
3. click OK.
4. Restart machine once.
5. After restart. Initiate windows upgrade.
6. After successful upgrade, return to msconfig and reset setting to "normal startup".

Thinkpad edge E530 upgrade to Win 8 pro failed

I tried to update my E530 to Windows 8, but the instllation stops at 29%, any help?
Solved!
Go to Solution.

have a look at this thread: http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/Cannot-upgrade-to-win-8-pro-on-thinkpad-twist/m-p...
you may wish to try the steps in post #2 as they seemed to have worked in a similar situation.
regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

After Win 8.1 upgrade, Acrobat 9 Pro suddenly won't run

I have Web Premium CS4, and Acrobat Pro v. 9.5.5. I bought a new Window 8.0 computer 90 days ago, installed the suite, activated, and everything ran fine. Yesterday, I upgraded to Win 8.1. Now, when I open Acrobat Pro, I get a pop-up message saying that it was installed as part of a suite, and to open another program in the suite first. When I click OK, Acrobat closes. I have tried opening nearly every other program in the suite (Bridge, Flash, Photoshop 64-bit), they run OK, but Acrobat will still not run, and there are no activation messages. I checked my Adobe account, and my version of Acrobat Pro 9 is still listed, with serial number.
I'm very disappointed, as I use Acrobat Pro quite a bit, and currently it will not stay open at all. Other than telephoning Adobe for help (no free support # listed), or using on-line chat (no link available), or e-mailing them (no address listed)...what can I do to "activate" it?
I've tried opening Acrobat Distiller and get the same message, but when I close it, I see a brief flash of what appears to be an input box with activation stuff. It only appears for half-a-second, so I cannot do anything with it.

Bill, thanks for that info. I don't think I would ever expect to get any support from Adobe on these programs, since I stopped buying revisions after CS4. I was surprised that I was even able to successfully install the CS4 Web suite onto Win 8.0, and Win 8.1 probably adds another couple hundred million lines of redundant code from our friends in Bill Gates-Land.
However, my A-Pro9 problem did resolve unexpectedly! I tried opening all the suite's programs, one at a time, and then Acrobat, with no luck. Then I realized that the suite had installed both 64-bit and 32-bit versions of Photoshop (I use the 64-bit version) onto my new 64-bit computer. So, when I opened the *32-bit Photoshop* for a minute, closed it, and re-opened Acrobat 9, it went back to working normally. I'll take it!
--Eugene

ThinkPad USB 3.0 Dock - Prevents ThinkPad Twist (S230) from booting (Windows 8.1 Pro 64 bit)

Hi, I upgraded to Win 8.1 tonight and found the ThinkPad Twist wouldn't boot at all when the USB 3 dock was plugged in. When it tried to reboot I just get a permanent blank screen. When I power down and do a cold boot, I get the ThinkPad welcome screen but no boot options line prompt below it and it gets stuck on the ThinkPad logo. The only way I can get it to boot is to unplug the ThinkPad USB 3.0 Dock USB cable from the machine then dreboot from cold again. It's a bit annoying and definitely didn't behave like this under Win 8.0 RTM just a few hours ago.
I also found the dock-attached external displays wouldn't work under Win 8.1, but updating the Dock firmware and the DisplayPort firmware as mentioned in another discussion board fixed that prob at least. But I still can't boot or reboot with the ThinkPad USB 3.0 Dock attached... Help would be appreciated.
TIA...
Paul
p.s. my ThinkPad USB 3.0 Dock is Model DU99019, ASM PN OA34193
Solved!
Go to Solution.

Thanks for the help. None of that fixed the problem, so I've run the tool and sent the results to DisplayLink support as you asked, with a link back to this thread. For your reference I have a Lenovo Service Request Number: 8001961163 on this problem. ( I mention this so we don't duplicate efforts).
Here's part of what I said to DisplayLink Support:
"I have all the latest drivers and updated the UEFI from Lenovo a couple of weeks ago. I restored a Windows 8.0 clone to see if the problem was present at that level, but I had the same problem, so I put Win 8.1 back. It used to work fine up until a week ago when I updated to Win 8.1, but as I said, I regressed to a Win 8.0 image and it persists there now, too.
The problem is when I restart Windows with the Dock connected, it’ll shut down normally then not reboot – it gets stuck on the Lenovo screen that asks to press Enter for the UEFI config. Same happens if I cold-boot it from power-off. Unplugging the USB3 cable and cold booting is the only way to get the PC going again.
Files attached show screen shots of my troubleshooting progress. There was originally a “Mirage Driver” that the compatibility reporter was complaining about, so I removed that but still had the same problem after rebooting.
Personally, I think it’s a hardware or UEFI problem, as the problem happens before anything of Windows gets loaded at boot time."
Best regards,
Paul

I'm using a 15" Macbook Pro running OSX6.8 and cannot upgrade. I have a subscription to Adobe CC but none of these work on this so I was on with Adobe for 5 hours trying to install and launch Illustrator, InDesign, Photoshop, Muse, and Acrobat Pro from CS

I'm using a 15" Macbook Pro running OSX6.8 and cannot upgrade. I have a subscription to Adobe CC but none of these work on this so I was on with Adobe for 5 hours trying to install and launch Illustrator, InDesign, Photoshop, Muse, and Acrobat Pro from CS6. Well, InDesign is the only one that works and I have a ton of work due! I don't have a serial number for Photoshop or Illustrator except for CS3, and they don't work. InDesign gave me no problems. Illustrator says it can't work on this machine. Photoshop needs a serial number. I'm stumped and getting anxious and freaked out. Can anyone help? Adobe Chat is down right now.

if you have a cc subscription, close ps > sign out and then back in to your cc desktop > open ps.
ai cs6 requires:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X v10.8 and v10.9 when installed on Intel-based systems.*
2 GB of RAM (8 GB recommended)
2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024 x 768 display (1280 x 800 recommended) with 16-bit video card

Upgrade from win 8.1 pro to win 8.1 enterprise without loosing all settings & programs

I would like to upgrade from win 8.1 pro to win 8.1 enterprise without loosing all my current settings and programs...
Is there a way?
Many thanks
Sepp
Thanks Sepp

Hi,
I think this design by default, you can refer to the link below for the statements:
Windows 8 and Windows 8.1 Upgrade Paths:
http://technet.microsoft.com/en-us/library/jj203353.aspx
Roger Lu
TechNet Community Support

Cannot upgrade to windows 8.1 pro help me

help me cannot upgrade to windows 8.1 pro cannot find the update from the the store windowssetupbox says i am not connected to internet no matter i am connected to internet windowssetupbox says this when i enter product key and click next help me please
my windows edition is windows 8 pro with media center build 9200 nad also can you please list all the windows editions that are not supported for update?this can help me

Hi,
Did we followed this article to update to Windows 8.1 from Windows 8?
Update to Windows 8.1 from Windows 8
For can't find the update in the store, have you checked this article?
Why can't I find the update in the Store?
Please take a check in the question You might be running an edition of Windows 8 that doesn’t support updating from the Store
in the above article for the editions that won't be able to update from Windows store.
Best regards
Michael Shao
TechNet Community Support

I have mac osx 10.6.8 but i cannot update but win i upgriding osx mountain lion tha mac tell me (cheke network ???) I HAVE mac book pro 2011

I have mac osx 10.6.8 but i cannot update but win i upgriding osx mountain lion tha mac tell me (cheke network ???) I HAVE mac book pro 2011

Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.

Win 7 basic upgrade to Win 7 Pro without Anytime upgrade

Ho do I upgrade my Win 7 Basic to Win 7 Pro without using Anytime upgrade? I have bought a new Win 7 Pro CD with product key but dont want to do a new install.

FerdieM wrote:
Thank you Wolfgang.
The Win 7 basic was a OEM that was pre-installed on the machine. The
Win 7 Pro is a new full software package bought.
It seems the only way then is to backup the system and start from new
by re-installing the Win 7 Pro?
Such a waste of time. Dont know why machines are sold with such lower
end versions. Saving money causes too much effort.
I'd check with your hardware vendor if he can sell you an OEM upgrade
instead of starting a new install - and if you did not open the
software package you may be able to get a refund for it - as it is
obviously not the thing, which you need.
Wolfgang

HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro

My HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro.
In device manager showing that biometric reader is working properly. But actually the finger printer reader is not reading or senseing. It seems like "dummy" part. Please help me to correctly configure step by step for this issue.
thankyou
Hillet
This question was solved.
View Solution.

Have you installed the Validity Sensor Fingerprint driver software for Windows 8.1?
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943811&swItemId=ob_134806_1&swEnvOid=415...
See page 64 in the following Windows 8.1 user manual for Validity Fingerprint setup information
http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=6943810&docId=emr_na-c04371762&docLocale...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

T410 Windows 7 Upgrade - from Win 7 Pro 32 to Win 7 Ultimate 64.

I purchased a T410 with Win 7 Pro 32 and am looking for the option to upgrade it to Win 7 Ultimate 64.
The shop in the country (Singapore) do not provide such option/customization.
Called tech support in the country without getting much info (they said they only support hardware).
Tried Lenovo shop in the country and they will only help to upgrade to Pro 64 with a charge, however without any recovery media (OS and drivers). I need Ultimate 64.
Browsed Lenovo site and couldn't find anything relevant.
Hope someone will give me the direction to upgrade from Win 7 Pro 32 to Win 7 Ultimate 64 (with all drivers).
- Hong
moderator edit: subject line adjusted for clarity

Dear Yannick Plavonil,
That discussion was started by me only on dell community and it was not resolved.
However if I upgrade can I revert back to Win 7, if something does not resolve or some of the devices
connected to the motherboard do not work?
Regards,
Ravi

Cannot upgrade to Windows XP Pro from XP Home

Hi there,
I am having trouble upgrading to XP Pro.
I have a Satellite A40-702, using a full version of XP pro it gets to exactly 70% of copying files before installation then I get a message saying cannot copy dxdiagn.dll. I can skip the file but then I have the same problem with other .dll's.
Any suggestions would be grately appreciated.
Many thanks, Kris.

Hi, I am no expert, but maybe try to copy the disk with Windows first, just to eliminate the possibility that it might be scratched or something.
Second of all, does the XP Pro have SP2 integrated on the disk? I could not install Windows on my M70 because the one already pre-installed had SP2, whereas the Install CD had only SP1.
Hope it helps.
Cheers,
Mike.

Since my macbook pro is an intel core duo but not a core 2 duo, I cannot upgrade to Yosemite. So... what OS X can I upgrade to with this computer?

Since my macbook pro is an intel core duo but not a core 2 duo, I cannot upgrade to Yosemite. So... what OS X can I upgrade to with this computer? Thanks for the input.

Intel Core Duo is a 32-bit processor, so the latest Mac OS X version you can install is Mac OS X Snow Leopard -> http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
You are running Mac OS X 10.6.8, so you are already running the most recent Mac OS X version for your computer.

Cannot upgrade to win 8 pro on thinkpad twist

Similar Messages

Maybe you are looking for