Cannot upload and share swf or captivate files in adobe connect

I'm trying to add a Captivate 6 file to my meeting in Adobe Connect 8. I can publish to the server but when I open a pod in the meeting room and share the document, it will not show properly. It will continue to spin but never upload (in Chrome it freezes the screen and in IE it spins and makes awful white noise). Uploading different ways does not make a difference. I am able to upload PPT and Presenter files fine. I migrated to a new server in July and wonder if some configuration is wrong. Any suggestions on what to try next?

I am assuming that you are using the direct option of publishing to Connect server. It will be worth the effort to try first publishing to a local ZIP file and then uploading the ZIP in Connect.

Similar Messages

Location to upload and share .SWF files?

is there a location to upload .SWF files to share similar to what youtube does for videos?
Thanks.

Ah, that probably wont work out too well then, considering the community
there has both high standards and a love of inside jokes. If you have some
kind of ftp site you can have them upload the files into that, and then go
to the urls of the respective projects (for example"
http://www.exampleftp.net/studentname/project1.html")
That would probably be the best way to do it that way it keeps the students
work in a closed network, getting feedback mainly from their peers, as well
as filters out any kind of spam/offensive/generic "this sucks" type comments
community based sites tend to run into a lot. Also, the work they upload to
the ftp site can be viewed from any computer. Your best bet is probably to
use Dreamweaver to set up the server and uploading their files. That's how
I did it when I took a class in Flash web design last semester. Hope this
helps, and I'm sure someone on the Adobe boards can help with setting up the
FTP site, since it's still something I have all that much experience with.
That or a tutorial could work too.

How to upload and share document from pages

how to upload and share document from pages app?

Hello dannafromfl,
Documents can be shared via File Sharing to iTunes or via Email.
Pages for iOS (iPad): Send and receive documents in email messages
http://support.apple.com/kb/PH3564
Pages for iOS (iPhone, iPod touch): Share documents by connecting to your computer
http://support.apple.com/kb/PH3598
Cheers,
Allen

How do you share a form fillable pdf in adobe connect?

How do you share a form fillable pdf in adobe connect? ItI used to do it like I would share any other document but now it says "could not process document for viewing." Anyone know what cahnged and how to fix it?

I hope its not preview.

Import an FLV file from Adobe Connect into Premiere Elements 12?

The Adobe Connect support staff recommended that we use Adobe Premiere Elements to edit the FLV file that we exported out of their software. We purchased Adobe Premiere Elements 12 based on that advice. Now we see that FLV files are not on the list of supported import files.
How can I import an FLV file from Adobe Connect into Adobe Premiere Elements 12 for editing?

Welcome to the forum.
Over the years, I have used Moyea's Flash Importer plug-in for PrPro, and it has worked perfectly. With about PrPro CS 4, IIRC, Adobe did add an FLV Importer, so Moyea began to suspend development of that plug-in. Then, with the release of the CC version of PrPro, they dropped FLV completely.
Now, Moyea does have other programs, but I do not know if any of them are plug-ins for PrE. However, many of their programs can create, edit and output FLV.
There is also a (free, if memory serves) FLV converter, FLV to AVI, which I used to convert FLV files, before I discovered the Moyea plug-in for my PrPro.
I would look into Moyea, to see if there is anything, that will work as a plug-in to PrE, http://www.video-to-flash.com/products/, and if not, explore a program, such as FLV to AVI: http://www.pazera-software.com/products/flv-to-avi-converter/
Good luck,
Hunt

Open files from adobe connect in adobe premiere

i tried to import a flv-file from adobe connect in adobe premiere pro cc and premiere pro cc tells me that there is no media in this file. how can it be possible that two programs from one company wont accept files from each other?

Hi SAPDeveloper,
Sorry for the trouble. I have heard that files created from Connect do not work well in Premiere Pro natively. I suggest you try to transcode the file in Media Encoder or VLC and continue from there.
If you have time, please file a bug addressing this issue: http://www.adobe.com/go/wish
Thanks,
Kevin

When I try to upload photos to a wordpress blog using Firefox an IO error occurs. I cannot upload and have to use Google Chrome

When I open Firefox and go to my wordpress web site to create a new blog, I cannot upload photos as an error message appears IO Error.
I can upload in IE and Google Chrome. This problem has only just started happening in Firefox for some reason.
Please help?

In the address bar, type '''about:crashes'''<enter>.''' Note:''' If any reports do not
have '''BP''' in front of the numbers, click it and select '''Submit'''.
Using your mouse, '''mark''' the most '''resent 7 - 10''' crash reports, and
'''copy''' them. Now go to the reply box below and '''paste''' them in.
Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift><br> ''(Mac Options)'' ''' key, and then starting Firefox. Is the problem still there?

.SWF files in Adobe Connect Training

Hello,
I’ve successfully created a Captivate project but when
I add it to Adobe Connect Training I can only get the .swf to play
if I don’t include the skin options (playbar). With the
playbar all the loads in Adobe Connect is the playbar and no movie.
Am I doing something wrong when publishing the original Captivate
Project?
Thanks.

Hey Awk76
Interesting one. Captivate is supposed to work with Connect
really seamlessly. The problem comes from there now being 2 files
(the skin...) instead of one.
Good news is you can fix it. First of all, go into your
Captivate and from the project menu, select skin (bottom one). In
there, select the Borders (2nd tab) and untick Show Borders. Take a
note of the Width field here. We'll use it later. But Andy I hear
you cry - the playbar is now inside my movie covering up content.
Don't panic. Press OK to the Skins dialog and go back to the
Project Menu, and this time click Resize Project. What you're going
to do is add a few pixels to the bottom of the project for the
playbar to sit in. Make sure you
untick Maintain aspect ratio (and save your project first)
and then amend the height by the whatever was in the Width field in
the Borders tab (see earlier)
Ok - so now you've got the new height. In the "If new size it
larger" section of the Resize project screen (which it should be)
click the "Keep project the same size and fill background with
colour" radio. You set the background colour to one of your choice
and set the Project Postion to Top Center. Press Finish and
Captivate will grind about a bit before returning you to the main
screen.
You'll notice that each slide now has a little bit more added
to the bottom. The playbar will sit in this but Captivate will only
produce 1 file, rather than 2. Perfect for Connect.
P.S. it's a good idea to make sure you've done all your
recording before you do this - this should be the last phase before
publishing.
P.P.S Apologies that this is a bit long...

Working with .swf files in Adobe Connect

My goal is to load custom made flash (.swf) presentations into Adobe Connect and present them to an audience (not using presenter)- however I am encountering the following issues:
1. The sound within the .swfs will not play (sounds works fine everywhere else, and was tested via the Audio setup wizard).
2. Many of the features within the loaded .swf do not work - sometimes causing runtime errors - does certain as3 code not work in the Adobe Connect environment?
3. "Synchronized Navigation" in the Shared Pod option menu is grayed out - I can not synchronize flash content? How can I control the presentation?
Thank you in advance for any guidance you can offer.

Connect is an AS2 applicaton, and therefore, AS3 SWFs will not work (or not work properly).
If you want to correctly build an application to work in a Connect pod you need to follow the rules in the Collaboration builder, SDK documentation. This has not changed since Connect 6, thus the older version refference.

How do I allow meeting participants to control the volume of an audio file in Adobe Connect 9?

The feature of changing the audio volume as a participant in an Adobe Connect meeting seems to have gone away in version 9.
It is missing on both audio and video files, and I am currently losing paying customers because the volume is either too low or too high.
How do I give my users audio volume control again?

Select all of your audio, go to the Modify > Audio > Apply Audio Normalization. It will bring all clips in each track to be the same level. Then, later, you can do your final mix much easier.
Or go to Window > Arrange > Audio Mixing and you'll have an on-screen mixing board to work with. There's a speaker icon in the top right, green keyframing is on while you mix in realtime during playback, gray, keyframing is off.
But use the first method first, for sure. Open the audio mixer after that, you'll save yourself a ton of work and time.
Message was edited by: BenB

What kind of files can I upload and share in the Creative Cloud?

Is the Creative Cloud just for files created by the Touch Apps, or can I store other kinds of files there? Are there any limitations on file types?

okay let me right this wrong,
you need to create a new collage then touch the landscape with a + sign on it ( at the top left of the canvas)
and then select "creative cloud ".
BUT DON'T try to download from Creative Cloud in the welcome screen , i doesn't work this way.
Thank you for your quick answer !

NWDS 7.0 Error during Quick PAR Upload and while trying Exporting PAR-File

Hello,
I am trying to use the functions "Export as PAR-File" and "Quick PAR Upload" in NWDS 7.0.
Unfortunately I got an error every time when I am trying to use this functions. I am using the package explorer in the Java perspectiv in NWDS for starting this functions. The error tells me the following:
"Unable to connect to the Portal"
"Operation failed: Please make sure the server "XY" is running or check the log (sap-plugin.log) for more detail"
Thats all.
When I am looking in the log-file I can read the following messages:
"ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore: view-actions: GET_VIEW:ALL]"
"ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore: view-actions: IS_VIEW_EXISTS:ALL]"
"ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore: view-actions: SIZE_OF_VIEW:ALL]"
"ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore: view-actions: READ_ENTRY:ALL]"
LOGIN.ERROR|null|| Login Method=[default] UserID=[user_Admin] IP Address=[192.168.xxx] Reason=[Cannot authenticate the user]
I have tried this with several users and their passwords. All of the users have admin-rights at least in the portal. One of them even in the SDM.
I can sucessfully deploy webdynpros from NWDS into the same Portal with this users.
We are using SAP Logon Tickets and SSO is configured working fine between Portal and backend.
We have imported Key Store File in NWDS unter Window --> Preferences --> Java Development Infrastructure.
And we are not using the NWDI.
Who knows why I cannot even export par-files? Are their any configurations missing?
Best regards,
Iris

It is mentioning about authentication.
check whether you have access to deploy directly or not ? maybe direct deployment into portal disabled .
I think you have to follow the procedure of checkout and activate procedure.
Can you clarify few things
1) Are you using NWDI Based Transports in your landscape?
Login Method=default UserID=user_Admin IP Address=http://192.168.xxx Reason=Cannot authenticate the user
http://192.168.xxx is it your development portal?
Did you clarify with admin people whether direct deployment disabled?
Koti Redd

Decompile/convert swf to captivate file?

Is there any way to convert or decompile a captivate swf back
to a captivate project file?
I know SWFs can be decompiled to FLAs, is there any other way
around this?
Short story is... I have a corrupt file and want to save as
much work as possible (it was a long presentation).
I've tried to create a blank project of the same size and
importing the slides... but it would not allow me to do that.
Thanks

> Is there any way to convert or decompile a captive swf
back to a captivate
> project file?
>
> I know SWFs can be decompiled to FLAs, is there any
other way around this?
>
> Short story is... I have a corrupt file and want to save
as much work as
> possible (it was a long presentation).
You can probably use any of the swf decompilers to convert
your swf to
Flash. I've no idea if you can then further convert it to a
Captivate
format - but I'm not aware of a method right now. But once
converted to
Flash you should have access to all your assets.
Steve
http://twitter.com/Stevehoward999
Adobe Community Expert: eLearning, Mobile and Devices
European eLearning Summit - EeLS
Adobe-sponsored eLearning conference.
http://www.elearningsummit.eu

Upload and Download a JAR/JAD file to/from a Web Server

How do I upload the JAR and JAD file to the Web Server?
And once deployed on the Web Server,how can I down load this.
I have written a small MIDlet.
I would like to upload this to my Web Server(I have Apache running),and then
I would like to download this and test this,
Please can any suggest.I am testing this on Siemens m50.
Ajay

You should configure your web server to send the correct mime types
for .jad and .jar extensions
Ivan

Cannot log and transfer long udma card files

I have started to do some longer recordings on the sony z5 with udma cards that are log and transferring to final cut. Last week I had 1:07 minute file that could only transfer 58:00 minutes worth. I did another test today and recorded for 1:10 minutes and only 51 minutes transfered? The file size is 10gb and 9.57 gb for the other?

Well, this may not be the same for you, but I think I had a similar problem with my Canon FS200. It was a hassle, but I was able to get the footage. I bought an Apple Product, it was called something along the lines of Quicktime Converter Mpeg-2, it's an upgrade for final cut and it works automatically. But in addition to that, I downloaded a free software from the internet called Mpeg Streamclip. You then open the file with that software, and hit "Export to quicktime". That SHOULD work for you, it did for me.

Cannot upload and share swf or captivate files in adobe connect

Similar Messages

Maybe you are looking for