Cannot upload avi files to photoshop cc

I've just recently started using Photoshop CC and was trying to upload an avi file to make a gif, however it kept saying that it did not support video on this version of photoshop. I use Windows 7 and my sysptems properties are: Installed Memory (RAM) 2.00GB, System type: 32-bit operating system

That warning comes up when your system is not properly updated and configured, most likely the graphics driver. It's severely underpowered either way, so this may not be possible to resolve, if you use an unsupported processor, which could be the otehr reason...
Mylenium

Similar Messages

  • Unable to open AVI files in Photoshop CS6

    Unable to open AVI files in Photoshop CS6
    I am running PS6 and want to open and edit AVI files. When I try to do that I get an error message saying "the video file cannot be opened" . This seems to apply to ALL avis - yet I can open and edit MP4, MMV etc. I installed Gspot to track whether it was a codec issue and when I try to open ANY file I get this error message : "Warning: DirectShow crashed while GSpot was attempting to obtain information about a codec.  This is usually due to damaged, misconfigured, conflicting, or poorly written codec drivers.  It is possible, perhaps even likely, that other media players will crash when they attempt to play this file as well, as most of them will also use DirectShow.  GSpot was able to intercept the crash, and has attempted to identify the codec or filter involved; uninstalling or reinstalling this codec or filter may solve the problem.  The codec was tentatively identified as:  C:\Windows\system32\imaadp32.acm Unknown video codec #11" I have NO idea where to go from here. I see a site to download the "imaadp32.acm"  codec but what about the "Unknown video codec #11". What the heck is that and what do I do about it. Any help would be appreciate, Cliff
    ps I should add that the avi files DO open and play in Bridge. I have the latest Quicktime. Everything is up to date and PS and the computer is otherwise working perfectly !

    Thanks Curt and 'Mylenium'
    I did re-set the prefs - but to no avail
    I checked and my graphics driver and audio is all up to date.
    No sure how to verify Windows Media Player's hardware acceleration options. I opened WMP Options /Perfformance tab and under Cd the DirX tab is checked.
    Running Windows Vista - so does the same caution apply regarding a re-install of Windows Media Components and DirectX ?
    Appreciate your help with this somewhat frustrating issue. I am converting some old 8mm film to avi with the hope of doing some edits then burning to DVD.
    Cliff

  • I can't open .avi files in Photoshop CS5

    I used to be able to open .avi files in Photoshop just fine, but I’ve just tried opening one again after a couple of months and I can’t. It’s just black blankness. I have no problem with .mp4 files, but unfortunately, most of the videos I'm trying to make gifs out of are in .avi format.
    Is it because I've updated QuickTime? Or is it that Adobe CS no longer supports .avi files? It says here that Photoshop CS6 supports the .avi format.
    My specs:
    OS X Mavericks 10.9.4
    Photoshop CS5.1
    QuickTime Player 10.3

    I used to be able to open .avi files in Photoshop just fine, but I’ve just tried opening one again after a couple of months and I can’t. It’s just black blankness. I have no problem with .mp4 files, but unfortunately, most of the videos I'm trying to make gifs out of are in .avi format.
    Is it because I've updated QuickTime? Or is it that Adobe CS no longer supports .avi files? It says here that Photoshop CS6 supports the .avi format.
    My specs:
    OS X Mavericks 10.9.4
    Photoshop CS5.1
    QuickTime Player 10.3

  • File does not exist, or file is empty; you cannot upload empty files

    Hello,
    I've a problem when trying to upload any file to KM Repository (Content Administrator-KM Content-Root-documents). It shows the following error: File does not exist, or file is empty; you cannot upload empty files.
    I have applied SAP note 898637 but is still not working. We're using SAP EP 7.0 SP11.
    Please, what could be the problem?
    Thanks in advance,
    Belé

    We've put the Java paremeters in Configtool.bat :
    -Djava.io.tmpdir=c:/EP_TEMP
    -Dcm.tmpdir=c:/EP_TEMP     
    In Server/Instance. Folders: Message Server&BootStrap and in Servers General and in Instances/Server.
    I hope this helps you,
    Regards

  • How can i export a 24bit avi file from photoshop for mac?

    how can i export a 24bit avi file from photoshop for mac? i have a client that specificly needs the files to be avi and in 24bit what are the settings that i need to use to export the video using photoshop on a mac?

    Hello,
      To make a 24-bit AVI file in Photoshop, go to File>Export>Render Video. Then, under File Options, choose AVI from the Quicktime Export drop-down menu. Click the Settings button. Click the Settings button in the AVI Settings window. Change Compression to None, and then choose "Millions of Colors" from the Depth drop-down under Compression.
      The Millions of Colors option is for 24-bit video (8-bit R+G+B channels, 8x3=24). Millions of Colors+ is for 32-bit video (24-bit video plus an 8-bit alpha channel).
    -Brett

  • I cannot open my file in Photoshop cs4 when it is in camera raw... please help me... Judi dunn

    I cannot open my file in Photoshop CS4 from camera raw... it wont go.. please help me... judi dunn

    I figured it out myself... judi (:-))

  • I cannot open NEF files in Photoshop Elements 12.

    I cannot open NEF files in Photoshop Elements 12. It says not supported by installed version of Camera Raw. What do I do? Do I need Photoshop 13?

    NEF files from which camera? Every camera's NEF files are different.
    Supported cameras
    Camera Raw plug-in | Supported cameras
    Compatible Adobe applications
    Camera Raw-compatible Adobe applications

  • I cannot open RAW files in photoshop elements 10. there are no updates and have tried installing raw 6.6 updates and it fails

    I cannot open RAW files in photoshop elements 10. there are no updates and have tried installing raw 6.6 updates and it fails

    Here is the ACR 6.7 Windows installer for Elements 10:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5383

  • I cannot open PDF files in Photoshop Elements as it is asking for a PDF Password?

    I cannot open PDF files in Photoshop Elements as it is asking for a PDF Password?

    Is it possible that the creator of the files set a password? That's usually the only time PSE asks for one, although you may be able to open the file just fine in a pdf program that isn't password-aware.

  • I cannot open any files in Photoshop CC

    I cannot open any files in Photoshop CC

    Please read these and proceed accordingly:
    http://forums.adobe.com/thread/419981?tstart=0
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

  • Cannot open DNG files in Photoshop CS6 from Lightroom 4 (Win7)

    Cannot open RAW files in photoshop from Lightroom.
    Best regards
    Adda

    i get the following error when i use the "OPEN" dialog in CS6 and in the folder that is opened are DNG files.
    COM Surrogate doesn´t work anymore (translated from german )
    Problemsignatur:
    Problemereignisname: APPCRASH
    Anwendungsname: DllHost.exe
    Anwendungsversion: 6.1.7600.16385
    Anwendungszeitstempel: 4a5bca54
    Fehlermodulname: StackHash_1e46
    Fehlermodulversion: 6.1.7601.17514
    Fehlermodulzeitstempel: 4ce7c8f9
    Ausnahmecode: c0000374
    Ausnahmeoffset: 00000000000c40f2
    Betriebsystemversion: 6.1.7601.2.1.0.256.1
    Gebietsschema-ID: 1031
    Zusatzinformation 1: 1e46
    Zusatzinformation 2: 1e46c9fd9bf0d34aaf137b5a02622618
    Zusatzinformation 3: e013
    Zusatzinformation 4: e0139c697c73e734130953707852bcea
    i have to close a few of these error messages and then i can load the files.
    ACR 7 opens and all is working.
    windows 7 64 bit
    intel 2600k
    16 gb ram
    460 GTX
    the error message will not appear when i open a folder that contains no DNG files

  • Not enough available memory. Cannot upload the file. [Android]

    Why do I get an error message that says: "Not enough available memory. Cannot upload the file." When trying to save a pdf to the document cloud?  The pdf is 105MB and I am using a Samsung Galaxy Note 3.

    tried un syning books from itunes as well as deleting app, reinstalled app and re-syned  books - appears to be ok now

  • HT3775 cannot open avi file with quicktime pro7

    I cannot open avi file with quicktime pro 7

    VideoLAN - Download official VLC media player for Mac OS X

  • Cannot open .avi files imported from Nikon d90 in Adobe Premiere 6.0.

    Cannot open .avi files imported from Nikon d90 in Adobe Premiere 6.0.
    When I try to open the file I get the following error message:
    "cannot open that file
    the file uses an unsupported file compression format"
    I really need urgent help with this so if you know a soloution, please post it!

    I don't do mjpeg so you will have to search the forum for advice
    But... having a playback codec installed does not ALWAYS mean the codec will work for Premiere editing
    After you search the forum and find the (I think free) codec vendors, you will need to install fresh so Premiere will "see" the codec for editing
    Or, Google
    convert mjpeg avi
    To convert to DV AVI type 2 with 48khz sound so the files will "natively" edit in Premiere
    My GUESS (you didn't say) is the d90 is a STILL camera that has a video function, not a true camcorder
    If you plan to do much video work, you need a tape-based DV camcorder so you use Firewire to do a digital transfer as a "real" AVI that Premiere may edit without conversion or extra software
    For a Firewire DV Camera - look at Panasonic PV-GS320 or GS500 (Note that I have not used either, but they have good reviews)
    http://reviews.cnet.com/Panasonic_PV_GS320/4505-6500_7-32330317.html
    http://reviews.cnet.com/digital-camcorders/panasonic-pv-gs500/4505-6500_7-31660646.html

  • "file.txt" does not exist, or file is empty; you cannot upload empty files

    All,
    I am trying to upload a file in Content Management --> Explorere --> 'Public Document' and get the following error "file.txt" does not exist, or file is empty; you cannot upload empty files.
    We have a EP 2004s install.
    Any thoughts would be appreciated.
    SAP Partner

    Try have a look at the following note: 898637: Upload to KM does not work
    <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_ep_km/~form/handler%7B5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383938363337%7D">Upload to KM does not work</a>
    The error seems to be related to a problem with writing into the directory for temporary data.

Maybe you are looking for