Cannot Upload Resources to P6 v7 - System out of Memory

Hello,
When I import resource assignments to P6 v7, I get an the following error message:
"Your system is out of memory. Please close other running applications and try this operation again."
I also noticed that the PM.exe file in Task Manager was consuming a huge amount of system memory, over 1 GB.
After this error message, when I go back to my P6 schedule, I find that several activity durations have been zeroed out. I've never experienced this with earlier versions of P6. Has anyone encountered any of this before?
Here's some more info about the schedule - It has 8600 activities, and 7000+ resource assignments.
Thanks for your help!

Ashish777 wrote:
Jason,
Thanks for your reply. I would have thought that 2GB of memory would me more than sufficient. Would increasing the memory to say 3GB or 4GB help? Incidentally, I did break down the spreadsheet into 7 "chunks" of about 1000 entries, and was able to successfully import the spreadsheet that way.
Also what do you mean by API?
Thanks again!It certainly won't hurt, but I doubt that 3/4gb even is going to allow you to import that many assignments in one shot with the method you are using; since P6 is a 32bit application, it cannot address that much memory.
The api is the programmers interface. It would require knowledge of Java programming, however, if you are going to be doing this sort of thing a lot, it would pay for itself many times over in speed, ease of use, and avoiding any potential issues.

Similar Messages

BPC 5.0.502 BPC Web Error Message: Exxception of Type System out of memory

In the process of updating a web page in the content library, page crashed received an error message of "Exception of type System out of memory. Exception was throw". What does this mean? We are now unable to open this sheet without receiving the prior message. Any remadies would be appreciated.

Hello,
    Did you receive this specific error message only managing that web page or for all pages?
    Did you try to stop all COM+ components on the application servers(on each if you are using more). It looks to be related to some memory problems.
    If the problem is related to a specific web page, the problem can be related to the content of that web page.
Best regards,
Mihaela

HT5731 My iPad says I cannot download any more because I am out of memory. I purchased space in cloud and still get same message. I do not know how to delete shows to open space. Can you help? Thanks.

My iPad says I cannot download any more because I am out of memory. I purchased space in cloud and still get same message. I do not know how to delete shows to open space. Can you help? Thanks.

Your iPad is physically out of storage space. Purchasing space in iCloud dosen't magically give your actual iPad more physical storage space.
You need to delete content off of your iPad.
https://discussions.apple.com/thread/5122738?start=0&tstart=0
http://m.youtube.com/watch?v=mZdBQoE37FA&desktop_uri=%2Fwatch%3Fv%3DmZdBQoE37FA

System.out of memory exception

I am running a TestStand sequence, using the .NET adaptor I am creating a class, and calling methods of a Class Library I created in VB.NET. I tested my class library in VB.NET and everything works in that environment. The sequence I call is pretty simple,
create an instance of my class, then
call a method that setups and initializes a camera
call a method that runs through the tests of a test sequence
The first pass of the sequence, it runs, the second pass of the sequence, whether in a For loop or the entire TestStand Sequence started again, it initializes the camera, but the second sequence, TestStand reports a system.out of memory exception in an underlying assembly/dll of my dll. But, when I call my dll from a .exe I made to test my dll, it works fine.
Thanks

Thanks for you reply.
I am calling the setup and initialization of the camera once; it is the calling the method that runs a sequence of tests that I am repeating calls to and subsequently failing on the second call. The interesting thing is if I close out of TestStand completely after the first run. Then run my TestStand sequence again, it reportsd the same error. It seems something is not being released, or cleared, or something. Keep in mind, I am only getting this with TestStand, I do not get it when I run a test .exe that calls my dll. I since have tested calling my .exe in TestStand that calls my DLL and that works. The problem is clearly in using TestStand to create the class and call the methods.
Thanks

Cannot resolve symbol - attempt to use System.out.printf

Hi All,
I adapted a HelloWorld program to use
System.out.printf instead of System.out.println (just for a test)
The println comand compiles fine with no errors, but for some reason the printf generates compile time error. Please let me know what am doing wrong.
Below is the error:
d:\j2sdk1.4.1_05\bin>javac HelloWorld.java
HelloWorld.java:6: cannot resolve symbol
symbol : method Printf (java.lang.String,java.lang.String)
location: class java.io.PrintStream
System.out.printf("%s","Hello, world!");
^
1 error
code:
public class HelloWorld {
public static void main (String[] args) {
System.out.printf("%s","Hello, world!");
}

If you check the documentation you can see this method was added in version 1.5
http://java.sun.com/j2se/1.5.0/docs/api/java/io/PrintStream.html#printf(java.util.Locale,%20java.lang.String,%20java.lang.Object...)
BTW: I suggest you use a current version of java, either 1.4.2_09 or 1.5.0_04

System out of memory when exporting/migrating Solution Manager

Dear all,
since we decided to migrate our Solution Manager (win2003/sql server 2005) system to a more appropriate server, we started an export using the NW70sr2 installation master CD, the one we used to install this solution manager instance.
Everything went ok up to the Java export phase, here we caught an out of memory issue, here's the relevant part of the sapinst.dev.log file:
May 24, 2008 1:49:46 PM com.sap.inst.jload.Jload dbExport
SEVERE: DB Error during export of BC_SLD_CHANGELOG
May 24, 2008 1:49:46 PM com.sap.inst.jload.Jload printSQLException
SEVERE: Message: The system is out of memory. Use server side cursors for large result sets:null. Result set size:262,182,182. JVM total memory size:518,979,584.
May 24, 2008 1:49:46 PM com.sap.inst.jload.Jload printSQLException
SEVERE: SQLState: null
May 24, 2008 1:49:46 PM com.sap.inst.jload.Jload printSQLException
SEVERE: ErrorCode: 0
May 24, 2008 1:49:46 PM com.sap.inst.jload.db.DBConnection disconnect
INFO: disconnected
TRACE      [iaxxejsexp.cpp:199]
           EJS_Installer::writeTraceToLogBook()
2008-05-24 13:49:49.755 JavaApplication execution finished
TRACE      [iaxxejsexp.cpp:199]
           EJS_Installer::writeTraceToLogBook()
2008-05-24 13:49:49.755 NWDB._callJLoad(export) done: throwing
TRACE      [iaxxejsexp.cpp:199]
           EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.syscopy.jloadRunFailed:
<html>Execution of JLoad tool 'C:\j2sdk1.4.2_14-x64\bin\java.exe -classpath F:\usr\sap\SMD\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload
SMDCA/sapmnt/SMD/SYS/global/security/lib/tools/iaik_jce.jar;
SMDCA/sapmnt/SMD/SYS/global/security/lib/tools/iaik_jsse.jar;
SMDCA/sapmnt/SMD/SYS/global/security/lib/tools/iaik_smime.jar;
SMDCA/sapmnt/SMD/SYS/global/security/lib/tools/iaik_ssl.jar;
SMDCA/sapmnt/SMD/SYS/global/security/lib/tools/w3c_http.jar;F:/usr/sap/SMD/SYS/global/sltools/sharedlib/jload.jar;F:/usr/sap/SMD/SYS/global/sltools/sharedlib/antlr.jar;F:/usr/sap/SMD/SYS/global/sltools/sharedlib/exception.jar;F:/usr/sap/SMD/SYS/global/sltools/sharedlib/jddi.jar;F:/usr/sap/SMD/SYS/global/sltools/sharedlib/logging.jar;F:/usr/sap/SMD/SYS/global/sltools/sharedlib/offlineconfiguration.jar;F:/usr/sap/SMD/SYS/global/sltools/sharedlib/opensqlsta.jar;F:/usr/sap/SMD/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;F:\usr\sap\SMD\DVEBMGS00\exe\mssjdbc\sqljdbc.jar -sec SMD,jdbc/pool/SMD,
SMDCA/sapmnt/SMD/SYS/global/security/data/SecStore.properties,
SMDCA/sapmnt/SMD/SYS/global/security/data/SecStore.key -dataDir E:/EXPORT/JAVA/JDMP -remove_trailing_blanks "C:/Documents and Settings/administrator.ATRSAP/removeTrailingBlanks.txt" -convert_empty_LOBs "C:/Documents and Settings/administrator.ATRSAP/convertEmptyLobs.txt" -convert_empty_strings "C:/Documents and Settings/administrator.ATRSAP/convertEmptyStrings.txt" -convert_empty_binary "C:/Documents and Settings/administrator.ATRSAP/convertEmptyBinary.txt"' aborts with return code 1.<br>SOLUTION: Check 'jload.log' and 'C:/Documents and Settings/administrator.ATRSAP/jload.java.log' for more information.</html>
Actually we used a workaroud to complete the phase, ie we menually re-issued the command and changed the heap value from -Xmx512m to -Xmx1024m
Is there a way to defalut the sapinst to pass to the java export command an higher java heap value, ie -Xmx1024m ?
Thanks in advance and cheers.
Franco.

It sounds like you may have a corrupt render file in your 7th episode. You can set in and out points in 5 minute increments and export those segments to narrow down which clip is the offending clip. Then re-render the offending clip.
I hope this helps.

Cannot open Sequence: "Operation Not Allowed" then "Out of Memory"

I quit FCS1 for about 5 hours and returned. When I opened the project I was working on I got these messages: "Operation Not Allowed" then "Out of Memory" when I attempt to open my master working sequence. Other sequences (small nests) do open within the project. The project opens, so the file is not corrupt. A back-up copy of the same project file on a separate physical disc generates the same results. I deleted the prefs and User Data folder, even ran FCP Rescue. Same results. Then I resorted to the Autosave Vault. The two most recent saves resulted in the same error messages. Fortunately the next did not. I lost a considerable amount of work. The system says my memory is OK (6GB). Any ideas? (An attempt to open on a FCS2 machine {8GB RAM} resulted in the same two error messages.)
The project is fairly lengthy (90 mins) and does have numerous 1 and 2 frame audio edits. Nothing particularly unusual in the video tracks--although I am mixing DV and HDV. It doesn't seem to me these attributes would matter, just throwing them out there.

...removing and re-rendering is a great idea, if you've got the time.
And if during render you get the same out of memory error, try rendering "in-to-out", rendering small chunks until you get to a chunk which brings up the error. Then, you've found an offending "corrupt" file.

Decompressing LZMA .zip files always gives "System out of Memory" on AIR.

AIR is supposed to support LZMA compression in addition to Deflate, but it has an error every time I try to use it. ZIPs using the Deflate method decompress just fine.
aByteArray.uncompress("lzma");
Should decompress the LZMA compressed data, but always just has a #1000 System is Out of Memory error.
I have tried skipping the standard header in the zip that should be 2 bytes version info, extra properties length (n) and a filed of the length of n;
Even when I do that, the same thing happens. I have tried deducting the LZMA header length from the general compressed data size in the ZIP header as well and that makes no difference. I am also above AIR 3.3 so that should not be the issue. I also tried setting a small 'library size' when compressing. LZMA is supposed to be "suited for embedded applications" so mobile devices should surly be able to handle it.
The header with the 13 byte header i believe is only for certain stand alone LZMA formats, so that should not apply.
What am I doing wrong? How do I make it work?

No. I try and avoid cluttering my apps with extra libraries if at all possible. It may have a sizeable footprint when I only need a few things, and it might contain encryption stuff if it supports the whole zip specification, which makes your app banned from export to some countries apparently.
I already have my app doing what I need it to do with the most common deflate method, but it simply would be a shame to not have LZMA support when it is built right into AIR. I would like to know what I'm doing wrong when I call uncompress with "lzma".

How to overcome a "System out of memory exception"?

Hi,
As i am running my program , I get (sometimes) an out of memory exception.
I don't know exactly why because I am always doing the same thing so if I get this exception once It should always be so... (of course, as I am trying , no other program is running on my computer! ).
anyway.
I have 3 questions:
1) Do you know how to eliminate this error ?
(I don't mind if the time of execution is longer)
2) I have Win XP, do you think that using a software to build ".exe" files can change the problem ? If so, have you heard about a simple 'one' (I downloaded JET Excelsior, but it seems rather complicated to parametrize)
3) (last but not least) Can someone explain to me WHY there is this type of exception ( I would have thought that when "memory is full", then there is a swap, and the program doesn't stop !
I know there is a lot of questions in one ! ( altough I tried to be short)
Thanks

In answer to your third question, the error occurs when
the JVM runs out of memory, not the OS. Since the OS
controls swapping the fact that the memory space
assigned to the JVM is running low won't cause
swapping to take place. The solution is either a) use
less space by reducing what you have loaded at any
given time or b) increase the amount of memory
available to the JVM. You can user the -Xms, -Xmx and
-Xss switches to increase the amount of memory
available.
Mark

Cannot Upload a file from local system

Hi,
I am trying to send an email with an attachment from an JSP form using javamail in a STRUTS action class.
I uploaded the JSP form and action class to my web server (Unix with JBOSS) and now the email is not sent and I receive the following error
javax.mail.MessagingException: IOException while sending message;
nested exception is:
java.io.FileNotFoundException: testFile.txt (No such file or directory)
I am assuming that there is something different about the way my web server handles file attachments but I can't find any information about how to fix the problem. When i sent a blank msg without any attachment it is working fine.
Any help is greatly appreciated.
Following is the code that i wrote in Action class to upload an attachment
Multipart multipart = new MimeMultipart();
multipart.addBodyPart(messageBodyPart);
messageBodyPart = new MimeBodyPart();
DataSource source = new FileDataSource(dataFile.toString());
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName(dataFile.getFileName());
multipart.addBodyPart(messageBodyPart);
msg.setContent(multipart);
Transport transport = session.getTransport("smtp");
transport.connect("host", port,"null","null");
if(transport.isConnected())
transport.sendMessage(msg, new Address[] {new InternetAddress(from));
}Thanks
Dinesh.

DrClap is right about using the correct pathname to the file, but...
At any
rate, rather than leaving this to chance, just give
the complete path name of the file to the data
handler:messageBodyPart.setFileName(dataFile.getAbsolutePath());
Don't do this. The absolute path to the file on your system will mean nothing
on the system that receives this message.
What you need to do is give the correct, perhaps full, pathname to FileDataSource
that names the file on your server.

System out of memory during deployment

Hello everybody,
I have a J2EE project and a respective EAR-project to deploy my application on the WebAS 6.40 (SP13).
Since yesterday I have the problem that when I add a new entity bean to my J2EE project I got the following error during deployment.
If I remove the entity bean there is no problem to deploy the project.
I tried a lot of things, e.g. changing the heap size of the developing workspace or of the sdm, but no results. Has someone an idea?
Is there probably a limit for beans in a J2EE project?
===========================================================================
Deployment started Wed Aug 17 11:58:00 CEST 2005
===========================================================================
Starting Deployment of HPMisEAR
Aborted: development component 'HPMisEAR'/'com.hp'/'localhost'/'2005.08.17.11.51.27':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application com.hp/HPMisEAR.. Reason: Errors while compiling:
The system is out of resources.
Consult the following stack trace for details.
java.lang.OutOfMemoryError
; nested exception is: com.sap.engine.services.ejb.exceptions.deployment.EJBFileGenerationException: Errors while compiling:
The system is out of resources.
Consult the following stack trace for details.
java.lang.OutOfMemoryError
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment of HPMisEAR finished with Error (Duration 51252 ms)
Thanks for help,
Paulo
Message was edited by: Paulo Calado

Hi,
thank you very much, it works now.
Best regards,
Paulo

System Out Of Memory

I was able to create my virtual application but when I go to use the zenworks option to create a bundle in ZCM I get an error "An error occored while publishing the bundle: Exception of type 'System.OUtOfMemoryException' was thrown." I restarted the ZCM server but it did not fix the issue. Anyone else have this problem.

Ok here is the mess I got out of zcc.log. The app I am trying to make is 1.07 G. It only seems to happen on applications that are large.
Mar 2009 13:28:47 FrameworkAuthentica..64 :------------Index.java : session attributes removed---------
16 Mar 2009 13:28:47 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/31694_795740433dff4bdc699391d98724ee78.png]
16 Mar 2009 13:28:47 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/97731_81d558599eb33007ecfb12cf2f5b97cd.png]
16 Mar 2009 13:28:47 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/12269_3f98d873571678b642ff3b79f7cdd2f0.png]
16 Mar 2009 13:28:47 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/64471_8b54de4cbcaab169fef8e92fdcd3cdc6.png]
16 Mar 2009 13:51:44 MessageUtil..........99 :Note: Make sure that you increment the version of this bundle in the Summary page or in the common tasks to ensure its delivery to assigned devices that already have this bundle.
16 Mar 2009 13:52:23 MessageUtil..........99 :Note: Make sure that you increment the version of this bundle in the Summary page or in the common tasks to ensure its delivery to assigned devices that already have this bundle.
16 Mar 2009 14:22:55 FrameworkAuthentica..59 :>>> Cleaning up session
16 Mar 2009 14:22:55 FrameworkAuthentica..64 :------------Index.java : session attributes removed---------
16 Mar 2009 14:22:55 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/41406_.png]
16 Mar 2009 14:22:55 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/84836_e3d764a886a1e3c9faf4986a55cc24f6.png]
16 Mar 2009 14:22:55 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/4bd85f93eb18f0e44f5fa603bed74d44.ico]
16 Mar 2009 14:22:55 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/48914_046aaee55dd8be24d2388fed2c5075d0.png]
16 Mar 2009 14:22:55 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/41406_.ico]
16 Mar 2009 14:22:55 UploadedFileManage..503 :UploadedFileManager: Deleting directory [/var/tmp/0ffaa180f70341d4a7d9d83e68341f70]
16 Mar 2009 14:22:55 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/50695_046aaee55dd8be24d2388fed2c5075d0.png]
16 Mar 2009 14:22:55 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/43127_046aaee55dd8be24d2388fed2c5075d0.png]
16 Mar 2009 14:22:55 FrameworkAuthentica..59 :>>> Cleaning up session
16 Mar 2009 14:22:55 FrameworkAuthentica..64 :------------Index.java : session attributes removed---------
16 Mar 2009 14:22:55 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/03251_730c0676e359b664457536741fbef398.png]
16 Mar 2009 14:22:55 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/58781_81d558599eb33007ecfb12cf2f5b97cd.png]
16 Mar 2009 14:22:55 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/04795_e3d764a886a1e3c9faf4986a55cc24f6.png]
16 Mar 2009 14:22:55 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/11242_8b54de4cbcaab169fef8e92fdcd3cdc6.png]
16 Mar 2009 14:22:55 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/77281_736005f4ba6c0a02f78510bde7dcdad4.png]
16 Mar 2009 14:22:55 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/23962_730c0676e359b664457536741fbef398.png]
16 Mar 2009 14:22:55 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/13694_f30c24bd81f4a05cad65a3797b2b84d9.png]
16 Mar 2009 14:22:55 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/69431_0d7e165fdadd122d5fefa71a93945e74.png]
16 Mar 2009 14:22:55 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/60539_736005f4ba6c0a02f78510bde7dcdad4.png]
16 Mar 2009 14:22:55 UploadedFileManage..509 :UploadedFileManager: Deleting file [/opt/novell/zenworks/share/tomcat/webapps/zenworks/images/appIcons/73857_3f98d873571678b642ff3b79f7cdd2f0.png]
16 Mar 2009 14:24:55 FrameworkAuthentica..59 :>>> Cleaning up session
16 Mar 2009 14:24:55 FrameworkAuthentica..64 :------------Index.java : session attributes removed---------
16 Mar 2009 14:49:32 RemoteControlDialo..982 :Entered the function addDropdownListElements
16 Mar 2009 14:49:32 RemoteControlDialo..338 :initialize controls called
16 Mar 2009 14:49:36 RemoteControlDialo..446 :Entered RightsValidator
16 Mar 2009 14:49:36 RemoteControlDialo..472 :Rights authentication allowed
16 Mar 2009 14:49:36 RemoteMgmtExtensio..343 :Inside rmPopup_close
16 Mar 2009 14:49:36 Vncobject...........312 :VNCDEBUG : render method on zenvnc object invoked
16 Mar 2009 14:49:36 Vncobject...........329 :VNCDEBUG : renderContents CALLED op:1
16 Mar 2009 14:49:36 Vncobject...........353 :VNCDEBUG: Browser user agent :Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727; InfoPath.2)
16 Mar 2009 14:49:36 Vncobject...........362 :VNCDEBUG: Browser is a supported browser
16 Mar 2009 14:49:37 Vncobject...........658 :Locale of the zenworks system is English
16 Mar 2009 14:49:37 Vncobject...........553 :VNCOBJECT:: cmd is : -pipe -zenrights -locale English -enabledbo -enablecaching
16 Mar 2009 14:49:37 Vncobject...........564 :VNCOBJECT:: completeCMDLine = <PARAM NAME="cmdline" VALUE=' -pipe -zenrights -locale English -enabledbo -enablecaching 172.20.147.102~~5950
16 Mar 2009 15:12:02 FrameworkAuthentica..59 :>>> Cleaning up session
16 Mar 2009 15:12:02 FrameworkAuthentica..64 :------------Index.java : session attributes removed---------

System out of memory load ing large project

Folks:
I am opening a large solution in SSDT. (Visual Studio 2013 - with Update 4 - 12.0.41025.0.) The project contains a rather large OLTP solution. In addition - we run focused data marts off of this common solution. So - the solution
contains 148 projects.
When I attempt to open the solution - I get the below. When I close the dialog, Visual Studio crashes. I can never do anything productive.
In Task manager - I see less the 50% memory used. I have 16GB installed, < 8GB is being used when Visual Studio crashes. So there must be an artificial limit some where.
How do I get around this?
Microsoft.Data.Tools.Schema.Sql.Build.SqlPackageException
Exception of type 'System.OutOfMemoryException' was thrown.
   at Microsoft.Data.Tools.Schema.Sql.Build.SqlPackageContent.GetStream()
   at Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel.ReadDataSchemaModelHeaderFromPackage(SqlPackage package, Boolean readCustomData)
   at Microsoft.VisualStudio.Data.Tools.Package.Internal.DatabaseProjectOrSqlSchemaFileReferenceNodeExtender.ReadHeaderData()
   at Microsoft.VisualStudio.Data.Tools.Package.Internal.DatabaseProjectOrSqlSchemaFileReferenceNodeExtender.TryReadHeaderData(Exception& ex)
   at Microsoft.VisualStudio.Data.Tools.Package.Project.Features.ProjectReferenceController.IsValidReferenceVerifySqlServerVersions(IDatabaseReferenceNode refNode, Boolean& canShowDefault, String& reason)
   at Microsoft.VisualStudio.Data.Tools.Package.Project.Features.ProjectReferenceController.IsValidReference(IDatabaseFileReferenceNode refNode, Boolean& canShowDefault, String& reason)
   at Microsoft.VisualStudio.Data.Tools.Package.Project.Features.ProjectReferenceController.IsValidReference(IDatabaseReferenceNode refNode, String& reason)
   at Microsoft.VisualStudio.Data.Tools.Package.Project.Features.ProjectReferenceController.GetReferenceData(IDatabaseReferenceNode referenceNode, CustomSchemaData& schemaData)
   at Microsoft.VisualStudio.Data.Tools.Package.Project.Features.FileManagerFeature.ProcessReferencesInQueue()
   at Microsoft.VisualStudio.Data.Tools.Package.Project.Features.FileManagerFeature.OnIdle()
   at Microsoft.VisualStudio.Data.Tools.Package.Project.DatabaseProjectNode.OnIdle()
   at Microsoft.VisualStudio.Data.Tools.Package.Project.SqlProjectIdleProcessingComponent.FDoIdle(UInt32 grfidlef)
John

Visual Studio is a 32 bit process so the most it could possibly use is 2GB.
Honestly I have used visual studio for a while (since VB6/VC6 to VS .Net 2002 all the way to 2015) and it is a memory hog as it is, I really can't imagine what it is like to have 148 projects in the solution - it must be really slow. I guess you are using
build configs to limit what you build each time or your build times alone will be painful!
I really would look at splitting the solution down into smaller parts, I don't think you will have much luck until you do that.

Out of Memory Error - Unable to Open UIR in CVI

I have a 38 MB UIR that I cannot open (I didn't create it, a colleague did) in CVI 8.0.1. I would like to edit it to reduce the size of the images within, but that requires the UIR to open first. I keep getting an error "Cannot open user interface resource file ... (Out of memory)". I've tried defragging my hard drive and increasing the virtual memory and rebooting. I have also tried to use the code converter to write the UIR to a *.c file, but I get the same error. I have a 2.4 GHz Pentium 4 machine with Win XP and 1 GB of RAM. I cannot submit the file because it has proprietary information in it. Before I try to re-create the file from scratch, is there any other solution possible?
Thanks,
John

Hi LucaTesi,
From ogre's profile it looks like he last visited the forum in 2007.
So beware that it is possible he will not be responding to your message.
I do not have much idea on your problem. Just a wild guess:
In the machine you could open the UIR, can you try to convert it to a text-UIR and move that file to your machine.
Maybe yours can open the text version, so you can edit it and save as a lower size file.
Hope this helps,
S. Eren BALCI
www.aselsan.com.tr

-17500 System Our of Memory Exception

Hello,
I am seeing strange behavior when I first start TestStand. I am getting an error -17500 'System Out Of Memory Exception was thrown' when executing the 'Create plug-in cache' step in the sequence 'Initialize Model Plugins' in the ModelSupport.seq. Here's the kicker: I only see this error when I try to run TestStand through a LabWindows/CVI GUI. I do not see this error when running TestStand from the Sequence Editor or a LabVIEW GUI I am using TS 2012 and CVI 2012. I am rnning the Parallel model. When I look at the Windows Task Manager Performance I do not see any memory issues. I have uninstalled and reinstalled TS and CVI to no avail. I am hoping someone else may have experienced this problem o rhave an idea of what the possible culprit is. I am running out of options.
I have attached a screen shot of the Run-Time Error window.
Thank you in advance for your help,
Jim
Solved!
Go to Solution.
Attachments:
TestStand Out of Memory.jpg ‏44 KB

See the following(Why do I Get an Out of Memory Exception (Error Code -17500; Operation Failed) when Using LabWindows/CVI Built TestStand User Interface with .NET 4.5?):
http://digital.ni.com/public.nsf/allkb/0136A53F98D69B7286257AD70069A735?OpenDocument
-Doug

Cannot Upload Resources to P6 v7 - System out of Memory

Similar Messages

Maybe you are looking for