Cannot use a number at the start of an email address

have been testing the Sun Java Messaging Server and discovered an interesting bug. It appears you cannot use numbers only as a prefix in an email address i.e. [email protected] If you attempt to send to an address of this type you get the following error:
"SMTP Error: 5.5.1 Unknown or illegal alias".
This is not a problem in Outlook. If I prefix the email address with a single letter it works fine.
I am not sure whether this is a superficial problem in the SJCS email web client or deeper down. In either case it is a bug in SJCS that probably needs to be addressed.
The justification for this posting is we are using phone numbers as email address prefixes. We are developing email for the mobile phone and it would be one less thing to remember.

Please start out with your version. Then add exactly how you're testing it.
Since Outlook isn't a mail server, I totally don't understand what you're talking about.
you might want to also run
imsimta test -rewrite -debug [email protected] (assuming that this is indeed a valid mail address), and post the results.

Similar Messages

  • You cannot use this version of the application iCa with this version of Mac OS x

    Bought a macbook pro from a friend- running 10.5.8. Could not find iCal in the Apps folder. Researched on line and it sounded like I needed to reinstall it from the disk. I did from the original os x disk and when I tried to open it, received the following message:
    you cannot use this version of the application iCa with this version of Mac OS x
    I have two disk for version 10.2. Neither disk offers "optional installs" but the second has "AdditionalApplications.pkg" but doen not install iCal at all. Any help would be greatly appreciated.

    Thanks. That brings up a whole new question- can I run 10.6 on my macbook? The specs are below:
    Model Name:
    MacBook Pro 15"
      Model Identifier:
    MacBookPro1,1
      Processor Name:
    Intel Core Duo
      Processor Speed:
    2 GHz
      Number Of Processors:
    1
      Total Number Of Cores:
    2
      L2 Cache:
    2 MB
      Memory:
    2 GB
    Was told at Apple Store that it would run terribly slow.

  • "You cannot use this version of the application Mail..."

    "You cannot use this version of the application Mail with this version of Mac OS X"
    I recently updated to 10.5.8 because my iTunes needed the new Safari and that needed 10.5.8
    After doing this, my mail no longer works and gives me the message above. What I don't understand is why is there an update that is required for one this but doesn't allow you to run another? Am I missing a Mail update to allow it to run on 10.5.8???
    I've already went through apple care and they walked me through running an Archival Install to get my computer back to its original settings, but that means I can't use Safari 4 and iTunes 9...
    Is there a way to have it all, Mail, 10.5.8, Safari 4 and iTunes 9? Please help, my mail is the only way I can check my work e-mail and it's not something I can just go without. Thank you

    Dummerkopf wrote:
    "You cannot use this version of the application Mail with this version of Mac OS X"
    I recently updated to 10.5.8 because my iTunes needed the new Safari and that needed 10.5.8
    After doing this, my mail no longer works and gives me the message above. What I don't understand is why is there an update that is required for one this but doesn't allow you to run another? Am I missing a Mail update to allow it to run on 10.5.8???
    I've already went through apple care and they walked me through running an Archival Install to get my computer back to its original settings, but that means I can't use Safari 4 and iTunes 9...
    Is there a way to have it all, Mail, 10.5.8, Safari 4 and iTunes 9? Please help, my mail is the only way I can check my work e-mail and it's not something I can just go without. Thank you
    See this thread from someone with a similar problem:
    http://discussions.apple.com/message.jspa?messageID=10327281
    Since you've restored your computer you won't be able to check the version number of your Mail application, but the question about moving Mail may still apply.

  • I cannot use my number pad at all.

    I made the newest upgrade yesterday.  I am unable to size my fonts correctly, thereby causing the sentences to blend.  I also cannot use my number pad at all.

    OS X Mavericks: If the numeric keypad doesn’t work

  • "You cannot use this version of the application Mail with this version...

    I recently needed to replace my hard drive and now when I try to open the Mail application I get the following message: "You cannot use this version of the application Mail with this version of Mac OS X."
    Any help is appreciated.

    ANSWERING MY OWN POST:
    I have tried reinstalling Mail from my Snow Leopard upgrade disk directly and tried it using Pacifist. Neither worked because both simply reinstalled version 4.0. Fortunately, I have a MacBook Pro and it has version 4.1. I copied this directly, which was not ideal (it was quite confused about my mailboxes), but it worked.
    The problem is that +Software Update+ did not detect the old version of Mail and Apple does not provide a direct way (that I could find) of downloading the latest version. Each time I downloaded Mail from Apple, it was version 4.0.

  • Cannot use device IOUSB Device:  The connected device requires too much power.

    Cannot use device
    IOUSB Device:  The connected device requires too much power.
    This is the message I get when connecting a camera on binoculars to ipad.  Is there a work around the camera will also load to a SD card

    There are a few options:
    1. If your camera supports it, you can try a low power mode, or picture transfer mode so it does not attempt to charge from the iPad. some cameras have this.
    2. You can add a powered USB hub between the iPad and the camera, so the camera uses the usb hub's power instead of trying to charge from the iPad.
    3. You can get the SD card reader and read the photos direcltly off of the card instead of through the camera.
    Depending on model of iPad:
    http://store.apple.com/us/product/MC531ZM/A/apple-ipad-camera-connection-kit
    or
    http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader

  • I cannot use any buttons on the display panel. The power is on and the display is lit up

    All-In-One Printer L7780  Windows 7 64-bit
    I cannot use any buttons on the display. The power is ON and the display is lit up. I have pulled the plug and waited a while and plugged it back in (several times over two days) but nothing changes.
    The diagnostics from the computer don't help. I can see the ink level and I can print a test page but the scanner does not work.
    This Printer just works when it wants to. The wireless connection only worked once in a while.
    Any help would be appreciated. Thanks!  Benno Wallé

    This may offer some help:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02716671&tmp_task=solveCategory&cc=us&dlc=en&la...
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • I cannot use this version of the application Adobe Air Installer with this version of Mac OS X.

    I have Mac OS 10.5.8 and every time I try to install Air Adobe 3 I get the message
    "You cannot use this version of the application Adobe Air Installer with this version of Mac OS X." 
    Could anyone help me? 
    Jai

    Hi,
    Adobe won't be developing for 10.5.8 new features (including new runtime) only security relates updates for existing runtimes (Flash 10.3.*/Air 2.7.*). Flash 11/Air 3.0 are only supported on 10.6.8.*/10.7.*, see:
    http://kb2.adobe.com/cps/916/cpsid_91694.html#main_system_requirements
    There is recent,  lengthy thread on forums with Adobe's employees statements on that subject (support/development for 10.5.* and newer) but I cannot find it quickly as basically forum search is broken/hard to do,
    regards,
    Peter

  • Cannot use this version of the application with this version of MAC OSX

    When I try to download the new beta, I get a message that says: cannot use this version of the application with this version of MAC OSX
    I'm new to Macs, but I installed all the software updates and that still didn't help. I dont have to buy a new operating system do I?

    Muse requires Mac OS X 10.6 or later.
    http://muse.adobe.com/tech-specs.html

  • Can no longer switch desktops using control-number on the number pad.

    Now that I upgraded to Mavericks, I can no longer switch desktops in Mission Control using control-number on the number pad. Only the numbers on the top row work.
    It's rather annoying, as it's much easier and quicker for me to swap desktops with my right hand (thumb on control, finger on numeric keypad) than left handwith the top row.
    Anyone else having this problem?
    Remember, Apple, a lot of folks still have full keyboards!

    changing the keyboard shortcuts does the trick!
    (Apparently Mavericks thinks the number pad numbers are different than the top row numbers. If you redo the shortcuts to use the number pad, the top row numbers no longer work with Mission Control)

  • I cannot use my ipad2 because the touch screen doesn't work at all. First I cannot unlock it or do anything in the screen!!!! Why?

    I cannot use my ipad2 because the touch screen doesn't work at all. First I cannot unlock it or do anything in the screen!!!! Why?

    Have you tried a reset To see if that fixes it ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • My original apple id which i use for itunes is not in the form of an email address and because of that i cannot access the cloud, if i change my id how will it affect my itunes account

    My original apple id which i use for itunes is not in the form of an email address so i cannot access the cloud.  if i change my apple id will it affect my itunes account?

    Welcome to the Apple community.
    You can use your primary ID or your alternate ID to log into iCloud. If you aren't sure what these are, you can find out at...
    My Apple ID

  • My ipod nano gen 4 is stolen! He is my first love with ipod. Can I lock this device by use serial number of the device? I don't want any bad guys use or do anything with my love one. Please let me know if have the way to do thanks.

    My ipod nano gen 4 is stolen! He is my first love with ipod. Can I lock this device by use serial number of the device? I don't want any bad guys use or do anything with my love one. Please let me know if have the way to do thanks.

    zenith_nm wrote:
    My ipod nano gen 4 is stolen! He is my first love with ipod. Can I lock this device by use serial number of the device? I don't want any bad guys use or do anything with my love one. Please let me know if have the way to do thanks.
    Nope!
    http://support.apple.com/kb/HT2526 How to report lost or stolen Apple product

  • You cannot use this version of the application Mail with this version OSX

    I just installed 10.5.8 (9L30) via Software Update and now my Mail doesn't work. Instead, I get a dialog box that says "You cannot use this version of the application Mail with this version of Mac OS X." When I run it out of Terminal from /Applications/Mail.app/Contents/MacOS/Mail it runs fine, even though it is Version 3.5 (which is what shows up when I do Get Info on the Mail application in the Applications folder). This is really poor, Apple. This is basic stuff -when you upgrade the OS you have to make sure all the Apps work. How are you going to fix this?

    Thomas A Reed wrote:
    Apple obviously are stupid enough to release an update that broke mail..
    Then how do you explain all the people saying they've had no problems with the update? (Oh, and "Apple are"???)
    Not everyone had the problem. Good for them. More than one person had the problem - and perhaps even more will experience it. That means there is a hole in the update process - i.e. something does not work properly in all situations. Apple is not God - they stuff up sometimes, innit? Stop defending them.
    No matter whether you use a Mac or Windows machine, you need to do some basic maintenance from time to time to keep things working smoothly. Macs, overall, tend to need less, but you still need to check the hard drive from time to time, and you definitely never want to install an OS update if there's a chance you've got hard drive problems.
    So if that's the case, why design an "automatic" Software Update utility that does not do a check of HD integrity if it is so vital to do such a check before installing an OS upgrade? Does that make any sense? Where do Apple recommend such a check prior to installing an OS upgrade? It's not immediately obvious do the average user. Apple have gone out of their way to make claims like "you never have to defrag a Mac". They don't mention anything about HD checks. If it's so fundamental, why not? Is it unreasonable to think that a company that prides itself on good design would think of this?
    Thank you for the link for the consolidated update. That fixed it - except that it should have worked first go from the auto updater.

  • You cannot use this version of the application Mail with this version of Ma

    My hardrive died so I got it replaced and since I bought my macbook on ebay I have no Installation discs so got a friend to install leopard - everything so far seems ok but when I click Mail this comes up -'You cannot use this version of the application Mail with this version of Mac OS X.'. Any ideas? Ive ran software update and its all up to scratch..

    Greetings,
    You seem to have a conflict somewhere, and it looks like you have a prior version of Mail that doesn't work with Leopard, along with the Leopard version of Mail. What version was on the Mac when you bought it, and where did the version of Leopard come from, exactly (was it a retail boxed version, or a version that shipped with another model of laptop)? Be very specific, as it does make a difference.

Maybe you are looking for

  • How can I share user in the same workspace but different applications

    I recently created a new application (new) in the same workspace as my old application (old). I have about 35 application express users. They are stored in uppercase. The new appl (old) , login page will only accept the DB user login and Not the appl

  • Problems creating new Web Dynpro ABAP application

    All, I am following this tutorial to create my first Web Dynpro ABAP application http://help.sap.com/saphelp_nw70ehp1/helpdata/en/fc/501b42b5815133e10000000a155106/frameset.htm In this tutorial I was asked to create a component as Local object. But a

  • Mountain Lion and Printing on an Epson R1800

    I have an Epson R1800, which according to Apple, is supported in Mountain Lion. Now, this printer worked nearly flawlessly until upgrading to ML. Now that I have, the printer just kicks out sheets of blank paper and I am always told that the printer'

  • Better method than using a large number of shift registers?

    I'm trying to work with example code provided free by stanford research systems (http://www.srsys.com/downloads/soft.htm). Their example software alows the user to run an analog scan across 100 masses (the x axis) which progressively produces a graph

  • Support for Pentax K20D RAW?

    The Pentax K20D employs a CMOS sensor that seems not to be supported by Aperture. I don't really know if the Pentax DNG alternative captures everything that the new sensor can deliver (that's ignorance not doubt, btw). I know the PEF format does. Is