Cannot use browser asking to contact for proxy server

cannot go to any web pages asking to contact you for proxy server

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

Similar Messages

I upgraded to 8.0 and browser says its configured for proxy server and will not load pages. I dont run through a proxy

I have had firefox since this computer was new and never had an issue. when I was prompted to update to 8.0 I thought nothing of it... but since it updated I get the error screen with: '''The proxy server is refusing connections'''
Firefox is configured to use a proxy server that is refusing connections.
Check the proxy settings to make sure that they are correct.
Contact your network administrator to make sure the proxy server is
working.

Check the connection settings.
*Tools > Options > Advanced : Network : Connection > Settings
*https://support.mozilla.com/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
*https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can

Hi. After I have loaded a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cut, for instance I cannot use Ctrl T to enter free transform mode. Also the toolbar is so small I cannot see the icons without ge

Hi. After loading a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cuts, for instance I cannot use Ctrl + T for free transform, how do I resolve this problem. In addition the tool Icons are so small I have to get close to the screen to see them, is there anyway the Icons can be made bigger without reducing the resolution of the screen.
Thanks
Derek

Are you working on a background layer? If so, Ctrl + T will not work. Press Alt and double-click your background layer to convert to a normal layer (or right-click BG layer and select Layer from Background) and try again.
If you're working in Photoshop CC 2014 you can go to Preferences > Experimental Features and tick "Scale UI 200% for high-density displays" to make your buttons and icons larger.

Using ACE for proxy server load balancing

Hello groups,
I wanted to know your experiences of using ACE for proxy server load balancing.
I want to load balance to a pool of proxy servers. Note: load-balancing should be based on the HTTP URL (i can't use source or dest. ip address) so that
a certain domain always gets "cached/forwarded" to the same proxy server. I don't really want to put matching
criteria in the configuration (such as /a* to S1, /b* to S2, /c* to S3,etc..), but have this hash calculated automatically.
Can the ACE compute its own hash based on the number of "online" proxy servers ? ie. when 4 servers are online, distribute domains between 1,2,3,4 evenly.
Should server 4 fail, recalculate hash so that the load of S4 gets distributed across the other 3 evenly. Also load-balancing domains of S1 ,S2 and S3 should not change if S4 fails.....
regards,
Geert

This is done with the following predictor command:
Scimitar1/Admin# conf t
Enter configuration commands, one per line. End with CNTL/Z.
Scimitar1/Admin(config)# serverfarm Proxy
Scimitar1/Admin(config-sfarm-host)# predictor hash ?
address         Configure 'hash address' Predictor algorithms
content         Configure 'hash http content' Predictor algorithms
cookie          Configure 'hash cookie' Predictor algorithms
header          Configure 'hash header' Predictor algorithm
layer4-payload Configure 'hash layer4-payload' Predictor algorithms
url             Configure 'hash url' Predictor algorithm
Scimitar1/Admin(config-sfarm-host)# predictor hash url
It does hash the url and the result takes into account the number of active proxies dynamically.
This command has been designed for this kind of scenario that you describe.
Gilles.

API for Proxy Server Connection

Hi,
can anybody tell me any API for Proxy Server Connection in java EXCLUDING
httpclient(apache) and setting system setting and making a urlconnection.

hey thanx for replying
Firstly i clear my requirement
I want some other way of connecting to Proxy Server Irrespective of Httpclient and setting system properties and then making url Connection ,these ways are clear to me .
I found one API HTTPClient (not belonging to apache Httpclient) its different
u check this at
http://www.innovation.ch/java/HTTPClient/api/index-all.html#_S_
But the problem is this API Does't support NTLM
i tried to found higher version of this API but i did't get .
API should support :
1. NTML
2.JDK 1.4
3.SOCKS (not necessary)
4.HTTP protocol (other like FTP ... not necessary)

OTPC Teams and SVN Repo -- cannot use the same SVN repo for different teams

Can one Subversion repository be used as the versioning repository for two teams?
I recently installed OTPC Server and client.
As the administrator, I created a Rally connection, and a Task connection, and a Subversion connection.
I created a team, and attached the three connections.
All worked fine.
Next I created a second team, attaching the three connections.
In the JDeveloper OTPC client, the Rally and Task connectors work for BOTH teams that I am on.
The subversion connection will not.
In the Team Navigator Panel, under the "Versioning" accordion subpanel, for one team it has a SVN connection, for the other team it says "Create Connection."
When I double-click on it, enter the repository information, and test read access, it says "Access granted."
When I press Okay to close the dialog it says:
"A repository connection with the supplied URL already exists."
Is this an intentional feature that one subversion repository cannot be used on both teams? Or is it a bug? Or is it my error?
Thanks,
Arie

the proxy env is ok in superuser env
➜ ~ git:(master) ✗ export | grep proxy
ftp_proxy=http://proxy.zte.com.cn:80
http_proxy=http://proxy.zte.com.cn:80
https_proxy=http://proxy.zte.com.cn:80
rvm_proxy=''
➜ ~ git:(master) ✗ su
Password:
[root@myhost jinleileiking]# export | grep proxy
declare -x ftp_proxy="http://proxy.zte.com.cn:80"
declare -x http_proxy="http://proxy.zte.com.cn:80"
declare -x https_proxy="http://proxy.zte.com.cn:80"

Creative Cloud is asking for proxy server username and password - what is this?

how do I find out the proxy server username and password

Krisw30568123 do you utilize an authenticating proxy server? If so then you will need to enter the proper credentials to access the Internet.

Can't send email using Windows Mail (Vista) through Anonymizer proxy server

I have recently installed a new version of Anonymizer which I need for access to a particular forum, but when it is connected I cannot send email. The message I got from Anonymizer support is as follows:
Anonymizer Universal blocks unencrypted mail port 25 to prevent abuse of our service by spammers. If you have an email address set up to use port 25, please contact your mail administrator to use an alternate port. We have found email providers prefer certain ports including 587 and 465. These ports generally require authentication and you may need to change your outgoing mail server to require authentication.
I tried these port numbers but they also gave errors. Any suggestions will be appreciated.
Solved!
Go to Solution.

I found the thread on port 587 and I followed the advice on the link for Outlook Express.
http://www22.verizon.com/ResidentialHelp/HighSpeed/Email/Setup+And+Use/QuestionsOne/124306.htm
Windows Mail is slightly different but when I set the outgoing port to 587 without requiring authentication, and it seems to be working OK now. So I'll mark this as solved. This seems to be a major issue since November and it should be in the FAQs and easy to find with a search.

Command for proxy server /power suppliesinformation

Hi All,
I want to know the proxy server for my solaris 9 machine..in windows we check internet connection we can see the proxy server setting.
i want a command to see how many power supplies are connected to a sun solaris machine.
Thanks,
Pavi

I used my SunSolve account id directly to where the URL on the page normally take you.
wget http-user=XXXXXXX http-passwd=YYYYY http://sunsolve.sun.com/private-cgi/pdown
load.pl?target=120469-01&method=hs -O 120469-01.zip
Get the xref via:
wget http-user=XXXXXX http-passwd=YYYYYY http://sunsolve.sun.com/private-cgi/pdown
load.pl?target=patchdiag.xref
I've had to change this various times when Sun makes site changes though.
I thought I had an example with Perl LWP somewhere that takes the xref over http and creates a file handle out of it suitable for a (<while_file>) type of loop. Can't find that one though, must have scrapped it for some reason. If I come across it, I'll post it for ya.
I would think it wouldn't be to difficult to turn an xref file into something that smpatch -x could take and let it go get everything.

Cannot log in. Get error message proxy server not reponding, check proxy settings. How can this be fixed ?

I get the following error message:The proxy server is refusing connections Firefox is configured to use a proxy server that is refusing connections. * Check the proxy server

You may have a problem with an extension if you do not keep settings.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
See also:
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Preferences_not_saved

Applet using socket connection always go through proxy server

Socket connection with socks always go through proxy server
We have two applets in different codebases using socket to talk to each other, until now nothing new, but the problem is that we are behind a proxy server with socks and because of that, the connection always go through the proxy server even with proxy override point to the applet machine. We have tried a lof of things and until now nothing worked, it looks like the socket is ignoring proxy override configuration. We would like to know if there is a way to solve this problem making the applets comunicate to each other ignoring the proxy server. It should happen when we set the plug-in option to "no proxy host", but it doesn't. Maybe it can be a bug of JVM, I don't know, just maybe, and if it's true, any other good idea would be welcome as well.
Thanks in advance.

Hi,
I am not very much sure if I can help you. In my previous experience, once you set the system property to use the proxy, then the jvm uses the proxy. If you want disable, in your code, you have to disable it.
like System.setProperty("socksProxyHost","someHost"), Properties props = System.getProperties(); props.remove(("socksProxyHost");

Windwows activation URLs for proxy server

Hi,
I need to know what Microsoft's URLs I have to enable/enter in PROXY to make Windows activation work?
If I enter *Microsoft.com it works. Without this entry I get 0x80072f8f.
Thanks.
Michael.
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

Hi,
You can configure the proxy server to disable Basic authentication.
Also, you can configure your proxy server to exclude the URLs for the certificate revocation lists (CRLs) from the requirement for Basic authentication.
http://go.microsoft.com/
https://sls.microsoft.com/
https://sls.microsoft.com:443
http://crl.microsoft.com/pki/crl/products/MicrosoftRootAuthority.crl
http://crl.microsoft.com/pki/crl/products/MicrosoftProductSecureCommunications.crl
http://www.microsoft.com/pki/crl/products/MicrosoftProductSecureCommunications.crl
http://crl.microsoft.com/pki/crl/products/MicrosoftProductSecureServer.crl
http://www.microsoft.com/pki/crl/products/MicrosoftProductSecureServer.crl
https://activation.sls.microsoft.com
http://support.microsoft.com/kb/921471
Hope this helps.
Jeremy Wu
TechNet Community Support

Cannot find where to download Gateway for SQL Server

I have searched OTN every which way to find the Oracle Transparent Gateway for SQL Server. I have checked my CD's and I have every one imaginable but not the one for SQL server. Why? Where is it hidden? I am trying to connect to a SQL Server 6.0 and an Oracle 8.1.6.3 Database at the same time.
[email protected]

Hello,
All of the downloads are [url http://www.oracle.com/technology/software/products/jdev/htdocs/soft11.html]here. According to the [url http://www.oracle.com/technology/products/jdev/collateral/papers/11/certification/index.html]certification page, JDev 11.1.1.3 is certified against Windows 2008 server, so I'd start by downloading the Windows version from there (even though they didn't update the description to say "for windows 2008")
John

Since I've downloaded and installed OS X Mavericks I cannot browse from Safari through the proxy server except for Apple's site

I have a brand new MBP 15" Retina display. Decided to download and install OSX Mavericks before I did any other setup. However since I've done this installation the only website I seem able to browse is Apple's. Google just keeps coming up not able to connect through the proxy. I still have tons to do and need to be able to access a number of websites. I also cannot get to the App Store.
Does OSX Mavericks have an issue with proxy servers?
I am writing this on my MBP 13" Retina display on which I have NOT upgraded to OSX Mavericks and I am having no issues at all.
Help please?

System Preferences / Security & Privacy / General tab / Allow apps downloaded from:
Change the settings.

CANNOT USE "Advanced Custom Search Form For ADF"

Hi,
I have tried the application on this old post but it doesnt work on jdev 11g even after migrating.
Can some body tell me whats wrong and / or post a working application here.
Need to use this functionality urgently.
the original post is here.
http://my.opera.com/dominionspy/blog/2007/02/26/an-advanced-custom-search-form-for-adf
Any help is really appreciated.

Thanks for your reply.
Could you tell me where can i find example implementations of the query model classes.
they have mentioned it to be found in "For an example implementations of the different model classes for a query, see the classes located in the oracle.adfdemo.view.query.rich package of the ADF Faces sample application."
Also where can i get the source code for this http://jdevadf.oracle.com/adf-richclient-demo/faces/components/query.jspx
thanks in advance

Cannot use browser asking to contact for proxy server

Similar Messages

Maybe you are looking for