Cannot use connection type (Blooth Connection-Phon...
When i launch nokia PC suit and click on "GET CONNECTED" Button.
1. Welcome message appears.
2. I click "Next" button
3. I select the connection type as "Blue tooth Connection"
4. click "next" button
I get following error msg:
Cannot use connection type. Check all the needed hardware, software and drivers are available.
Note: I am able to transfer files & pictures from my mobile phome to PC & vice-versa through IVT BlueSoleil.
Please provide a solution.
Below is my PC Config
OS: Winsows XP Professional-SP2
Nokia PC Suite: Version 6.81.13.0, Language: English
Blue Tooth Device: IVT BlueSoleil
Bluetooth stack: Microsoft Bluetooth stack, Version 5.1.2600.2180
Thanks Manta for your post. The problem is fixed now.
I followed the instructions given by DOOMsDAY at below link.
http://www.allaboutsymbian.com/archive/t-42191.html
1. Uninstall Nokia PC Suite (whichever version you have).
2 Download Nokia PC Cleaner and the latest version of PC Suite from the Nokia site
3. Unless you have BlueSoleil 1.6.1.4 installed, uninstall BlueSoleil.
4 Get the required version of BlueSoleil i.e. 1.6.1.4. (You can get it from http://www.abe-hk.com/english/support/drivers/BlueSoleil%201.6.1.4.zip)
5 Install BS 1.6.1.4 and pair up your phone. Authorise from the phone and from BS.
6 Run Nokia PC Cleaner and take the "Other" option to clean out all remaining files and registry entries.
7 Install PC Suite with your phone and PC connected.
8 Use the "Get Connected" function and choose Bluetooth and you should be connected up in a few seconds
Regards
Sharath Kumar.
Similar Messages
-
Help with circumvention of ORA-01472: cannot use connect by on view with ..
Hi,
Any help resolving the following would be v. helpful.
The Aim
Produce a hierarchical report of all users and the privileges they have via the various roles they are granted.
The SQL
select lpad(' ', level*2,' ')|| granted_role from (select grantee, granted_role
from dba_role_privs
union
select role, granted_role
from role_role_privs
union
select role, privilege
from role_sys_privs
union
select 'All users', username
from dba_users)
start with grantee='All users'
connect by prior granted_role = grantee;
The error
ORA-0147: cannot use connect by on view with DISTINCT, GROUP BY, etc.
The database
Oracle 8.1.7.4 (Yes I know ....)
The Solution
[Thanks in advance]What if you create a table first
create table role_grants as
select granted_role, grantee
from (select grantee, granted_role
from dba_role_privs
union
select role, granted_role
from role_role_privs
union
select role, privilege
from role_sys_privs
union
select 'All users', username
from dba_users)
Then run the hierarchical report
select lpad(' ', level*2,' ')|| granted_role
from role_grants
start with grantee='All users'
connect by prior granted_role = grantee -
HT4623 Why I cannot use the new feature of phone after I upgraded to ios 6???
I have already upgraded to iOS 6, but why I still cannot use the new feature of phone??
I cannot reject calls by sending them message. What happen??While ios 6 is compatable with the iPhone 4, many of its features are not available for the 4. The features need the 4s or 5. See here:
Turn-by-turn navigation is available only on iPhone 4S, iPhone 5, and iPad 2 or later with cellular data capability. Flyover is available only on iPhone 4S, iPhone 5, iPad 2 or later, and iPod touch (5th generation). Cellular data charges may apply.
Siri is available in Beta only on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access. Siri may not be available in all languages or in all areas, and features may vary by area. Cellular data charges may apply.
FaceTime video calling requires a FaceTime-enabled device for the caller and recipient and a Wi-Fi connection. FaceTime over a cellular network requires iPhone 4S, iPhone 5, or iPad (3rd generation) with cellular data capability. Availability over a cellular network depends on carrier policies; data charges may apply.
Offline Reading List is available on iPhone 4 or later, iPad 2 or later, and iPod touch (5th generation).
Made for iPhone hearing aids require iPhone 4S or iPhone 5.
Panorama is available on iPhone 4S, iPhone 5, and iPod touch (5th generation).
Find My iPhone and Find My Friends enable you to locate iOS devices only when they are on and connected to a registered Wi-Fi network or have an active data plan. -
I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc.
I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting for it to work.
Can you please help me with this?
Thanks Matthew.Hello,
The services you listed in your post will require a data plan which is provisioned by your wireless provider. You may want to contact your wireless provider to see if you have the correct plan.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)! -
I cannot use the type tool in Photoshop CC it goes black. Why?
I cannot use the type tool in Photoshop CC it goes black. Why?
What goes black?
What OS version are you using?
And have you updated your video card drivers from the GPU maker's website? (bugs in video drivers being the most common cause of display issues) -
I have iphone4s in Shanghai, China, but I cannot use it to make a phone outside Shanghai. I have already changeded my SIM card and upgraded the iOS to 5.1 vision. Now can I slove it?
It's not clear what you mean. Do you mean you can't place a call to anyone outside of Shangai? That would be an issue with the calling plan you have with your carrier. Contact them. Likewise, if you can not place a call when you are outside your coverage area, that is also a carrier issue. If you are trying to use a different carrier while travelling, it's possible your phone is carrier locked and you can not use the carrier you are trying to use.
-
Hi All,
I have just purchased a second hand iphone 3GS, i want to change its registration, because this iphone is already been registered with the first person name, i cannot use app store on the phone coz it ask password which i dont have, ny suggestion how can i change the itunes password or the account settings.
Thanks & Regards
AyubRestore the iphone as new.
iPhone User Guide (For iOS 5.1 Software) -
My iphone touch screen suddenly stopped working. I hold the power button to power off, but cannot use slider to complete the action. Thought perhaps restart would help.It's keeping proper time, etc., but i can't use it at all. Help. Any suggestions?
Try a reset, hold down the home/power button together until you see the apple logo and then release, then wait for the phone to boot back up. NO data is lost.
-
Table in Smartforms cannot use data type CURR
Hello everyone,
I have trouble with Smartform
in Main window , I want to show data in table.
in main area of table .
I want to show data of amount in document (BSEG-DMBTR)
in text of main area. I add work area W_LINE_ITEM-DMBTR.(declare W_LINE_ITEM TYPE BSEG in Global definitions)
but when i execute report program I got error message "W_LINE_ITEM-DMBTR Unknown in form"
it's appear error for data type CURR only, for data type CHAR. it is OK.
Is Smartform can show data type Curr ?
what should i do to solve problem ?
Please help.Hi,
The best way wud be just to use the "Currency/Quan. Fields" tab...
In Global definition,, go in "Currency/Quan. Fields" tab -> declare the the field as below for W_LINE_ITEM-DMBTR,,
Field Name Reference Field Data type
W_LINE_ITEM-DMBTR BSEG-DMBTR CURR
Rgs,
Lokesh. -
The Mobile Extension SDK is referring to
Windows.ApplicationModel.SocialInfo.SocialInfoContract, but the contract is currently in the wrong location.Work around:
From an administrative command prompt, rename the contract folder:
On X64 bit machines type:
Ren “C:\Program Files (x86)\Windows Kits\10\References\
Windows.Phone.StartScreen.SOCIALRTContract” “Windows.ApplicationModel.SocialInfo.SocialInfoContract”
On X86 bit machines type:
Ren “C:\Program Files\Windows Kits\10\References\
Windows.Phone.StartScreen.SOCIALRTContract” “Windows.ApplicationModel.SocialInfo.SocialInfoContract” -
Since the update, I cannot use Itunes store on my phone.
When I open the itunes store app, the screens have the header and footer but anything I do does not work. It has a blank screen. Any suggestions?
Hi dsbrew1,
First, try signing out of your account in Settings > iTunes & App Store. Once signed out, force close the iTunes Store application and restart your device. After you have restarted, go ahead and sign back in.
If the above did not resolve your issue, refer to the following:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
If you haven't been able to connect to the iTunes Store:
- Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
- Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
- Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet.
- Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
- Try resetting (turning off and then on again) your Wi-Fi router
- If the issue still persists see, iOS: Troubleshooting Wi-Fi networks and connectionsoriOS: Troubleshooting Wi-Fi networks and connections.
Thanks,
Matt M. -
E6-00 and Belle update : Cannot use Wifi and LEAP ...
Upgraded the E6-00 yesterday. First issues arise and even after a full reset, it still does not work.
- Wifi connection using LEAP authentication
Network is found, popup to enter username and password, all is good. Except the phone keep trying to connect while I type the password and each time, it re-ask the username. In short I cannot use connect at all as I don't have time to enter both username and password before it loop.... No more wifi connection possible as it use this LEAP authentication. Any way to increase the connection retry timeout ?
- IMAP folder not found
Same config as under Anna, but under Belle, it does not find any folder for IMAP account (and yes, the mail root folder is right), refreshing the folder list, just do nothing.
- MAPS
Say that it's empty and need maps. Give few options:
* use OVI on the PC : OVI doesn't find MAP on the phone
* use wifi to download map : .... if wifi would work, why not
Anybody else got the same issue ? Or found solution ?
L.\
Solved!
Go to Solution.Upgraded the E6-00 yesterday. First issues arise and even after a full reset, it still does not work.
- Wifi connection using LEAP authentication
Network is found, popup to enter username and password, all is good. Except the phone keep trying to connect while I type the password and each time, it re-ask the username. In short I cannot use connect at all as I don't have time to enter both username and password before it loop.... No more wifi connection possible as it use this LEAP authentication. Any way to increase the connection retry timeout ?
Ok try to delete your apn, reset the device and resintall the OS. Don't restore any backup ans configure the WLAN apn: settings> connectivity> settings>destinations. Into the WLAN settings go to WI-fi security settings> in the fifrst field select EAP> in the second field EAP plugin settings > select EAP-LEAP.
This way the apn will work again
- IMAP folder not found
Same config as under Anna, but under Belle, it does not find any folder for IMAP account (and yes, the mail root folder is right), refreshing the folder list, just do nothing.
Please delete your mailboxes and configure them as you want. To create a IMAP access mailbox , for example Nokia Mail (outside of Messaging server) select Other. Put you credentials and choose Standard. You will see into Settings> your mailbox > sync content > Folder subscriptions> choose which folder to sync and it's done
- MAPS
Say that it's empty and need maps. Give few options:
* use OVI on the PC : OVI doesn't find MAP on the phone
* use wifi to download map : .... if wifi would work, why not
Anybody else got the same issue ? Or found solution ?
Please delete on mass memory the folder Cities and the file Qf, then open Maps and close the application. Verify that the folder Cities and the file Qf are again in E. Connect your device to Nokia Suite and redownload the cartography. -
Using sql type with cursor in plsql block
I wanted to bulk collect columns in a table into a sqltype .I cannot use plsql type here since I am using it with table function in a merge statement.
Sample code is like this
create type t_type as object(empno number);
create type tab_type as table of t_type;
1 declare
2 t1 tab_type;
3 begin
4 select empno bulk collect into t1 from emp;
5 end;
/I get an error like
ERROR at line 4:
ORA-06550: line 4, column 8:
PL/SQL: ORA-00932: inconsistent datatypes: expected UDT got NUMBER
ORA-06550: line 4, column 1:
PL/SQL: SQL Statement ignored
Pls suggest some alternativeHi,
You cannot bulk collect into a table of objects like this.
Are you going to use some DML operations on this SQL collections. If yes then you need SQL collections and objects. Otherwise simple PL/SQL objects and collections will do.
Anyway, to give an alternative.
This is one way of doing things;
create table emp(emp_no number(10),emp_name varchar2(100));
INSERT INTO EMP ( EMP_NO, EMP_NAME ) VALUES (
1, 'A');
INSERT INTO EMP ( EMP_NO, EMP_NAME ) VALUES (
2, 'B');
INSERT INTO EMP ( EMP_NO, EMP_NAME ) VALUES (
3, 'C');
commit;
create type t_type as object(empno number(10),empname varchar2(100));
create type n_type as table of number(10);
create type v_type as table of varchar2(100);
create type tab_type as table of t_type;
declare
t1 tab_type := tab_type();
t2 n_type := n_type();
t3 v_type := v_type();
begin
select emp_no,emp_name bulk collect into t2,t3 from emp;
t1.extend(t2.count);
for cnt in t2.first..t2.last
loop
t1(cnt):=t_type(t2(cnt),t3(cnt));
end loop;
for cnt in t1.first..t1.last
loop
dbms_output.put_line(t1(cnt).empno||'---'||t1(cnt).empname);
end loop;
end;
Now if you do not require the DML operations then you can do the following;
declare
type n_type is table of number(10);
type v_type is table of varchar2(100);
type rec_type is record(empno n_type,empname v_type);
t1 rec_type;
begin
select emp_no,emp_name bulk collect into t1.empno,t1.empname from emp;
for cnt in t1.empno.first..t1.empno.last
loop
dbms_output.put_line(t1.empno(cnt)||'---'||t1.empname(cnt));
end loop;
end;
regards,
Dipankar. -
I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"
Welcome to the Apple Community Willy.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device. -
i connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone. what should i do.?
First, you do not have a 3G if you could upgrade it to 6.1.3, because 4.2.1 is the last version that will work on the 3G. So you either have a 3GS or you somehow hacked the phone to install an incompatible version. You can check the model you have by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
Assuming you have a 3GS the most likely reason for your problem is you have a gray market phone that was hacked or jailbroken to unlock it. When you upgraded it you removed the hack, so the phone is now locked to its original carrier.
Maybe you are looking for
-
Can I print with a black cartridge only? HP Deskjet 3520
Hi everyone, I just bought a new black ink cartridge for my printer, assuming that I did not need to replace all the colors since I only want to print in black (shipping labels and such.) Well, it only prints in a grayish shade now! The ink levels o
-
How to get the list of registered phones from RTMT
I need to get the list of the registered phones from RTMT in excel sheet or text file how i can do this ?????
-
JSP and servlets(displaying Data On JSP page)
Hiii all i am new to JSP ...also to servets tell me hw to print my data on the JSP page, i can print my data on the server,that data i want to print on JSP page if u all have e.g's it will be very good Thanks in advance Take Care Rahul :)
-
ITune 7.4 and Apple TV and Apple Store
Just upgraded to 7.4. Results: 1) Cannot get to Store with the resulting message - "iTunes could not connect to the itunes store. The network connection was refused." Curious that my network is working fine and I can connect to Support. 2) my Apple T
-
TS1538 My PC will not download iTunes 10.7. Nothing happens after clicking on Save File.
My PC will not download iTunes 10.7. Nothing happens after clicking on Save File. Do I have to uninstall 10.6.1.7 first?