Cannot use Dreamweaver CS6 because of "running for long time" script issue

Started getting this error yesterday, it’s killing me....
Dialog box says: "A script in file ~:Applications:ADOBE CS6:Adobe Dreamweaver CS6:Configuration:Shared:BC:JS:bc_sites.js has been running for a long time. Do you want to continue?"
The message keeps persisting almost everytime I try to edit something, the Yes or No options don’t seem to do anythin other than remove the dialogue box temporarily.
Searched for a solution to this but only found unanswered questions, so I uninstalled the app, re-installed it and all seemed to be ok for a short while and now the issue is back.
I’m using business catalyst and like the improved imtegration, but this is broken!!
Please Help..

designchiefkm wrote:
Hi, yeah that link leads to "Ask the experts" which is this community forum...
very bland support me thinks...
I'm a strong supporter of DW and Adobe, but it's one of the reasons I'm not in the Cloud or using BC. Support is charged at a per-incident or corporate rate: http://www.adobe.com/support/programs/ .
You can try trashing that Configuration folder ( http://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html - See steps 12 & 4 for details). But that's about the extent of community support here for most technical issues. Seeing as how you have only 3 posts since April you probably were not around the last time customers spoke up and complained and prompted the Lambert Walsh letter almost 3 years back now. ( http://blogs.adobe.com/captivate/2009/08/open_letter_to_our_customers_o.html ). Just don't be afraid to speak up or write to Adobe, they will listen.

Similar Messages

Report running for long time & performance tuning

Hi All,
(1). WebI report is running for long time.so what are the steps i need to check for it ?
(2). Can you tell me about performance tuning in BO ?
please help me.....
Thanks
Kumar

(1). WebI report is running for long time.so what are the steps i need to check for it ?
The first step is to see if the problem lies in the query on the data source or in webi itself. Depending on the data source there are different ways to extract the query and try to run it against the database. Which source does your report uses?
(2). Can you tell me about performance tuning in BO ?
I would recommend to start by reading the administrator's guide. There is a section about how to improve performance.
Regards,
Stratos

ABAP process job ( BI_PROCESS_ABAP ) in process chain running for long time

Dear Experts,
We have an ABAP process job BI_PROCESS_ABAP in a process chain. This job is running for a very long time than previous run time.
Recently we had an ORACLE database upgrade from 9.2 to 10g.
From the very next day , we are having this problem.
And also previously this process-chain was under control of BASIS guys . they were using a tool called CRONACLE to schedule it. At the time of upgrade this tool was crashed and they asked us to schedule it in BW system instead.
Underlying program is using two custom tables.
one is having both primary & secondary indexes but the other table is having only primary index.
I am not sure whether we have secondary indexes on other table prior to upgrade or not.
Where must be the problem?...
At the time of upgrade BASIS has re-organized the table space along with database upgrade.
please help me...
Regards,
SRIKANTH

Please ask yr basis consultant to check the system parms.
Below i have listed down SAP recommneded system parms .
abap/heap_area_total 4000000000
abap/heap_area_dia 2000000000
abap/heap_area_nondia 2000000000
Also check in SM37 if any other jobs are running for long time, peventing the your job running.
Check the SM12 for locks or SM58

Background Jobs running for long time.

Dear All,
I had done the Homogeneous System Copy on my ECC 6 QA System successfully by restoring the offline backup of Production system. My system is up & running but I have some Performace issues in the system. I also observed that some jobs are running since long time & most commonly i got the below line in the BGD Trace "WP has reached abap/heaplimit = 40000000 bytes".
I search for the notes but couldn't find anything.
Please help me to resolve this issue.
Below is the Trace :-
trc file: "dev_w7", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
M sysno      12
M sid        UBQ
M systemid   370 (Solaris on SPARCV9 CPU)
M relno      7000
M patchlevel 0
M patchno    52
M intno      20050900
M make:      single threaded, Unicode, 64 bit, optimized
M pid        16335
M
M
M Mon Nov 10 19:01:10 2008
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ThInit: running on host UBSQAS
M calling db_connect ...
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@UBQ on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1 0x1067f1be0 0x1067f96a0 0x106809e38
C Attaching to DB Server UBQ (con_hdl=0,svchp=0x106809d68,svrhp=0x10680c0b8)
C Starting user session (con_hdl=0,svchp=0x106809d68,srvhp=0x10680c0b8,usrhp=0x1067f9eb8)
C Now '/@UBQ' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0x106809d68,usrhp=0x1067f9eb8)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@UBQ on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1 0x1067f1be0 0x1067f96a0 0x106809e38
C Starting user session (con_hdl=0,svchp=0x106809d68,srvhp=0x10680c0b8,usrhp=0x1067f9eb8)
C Now 'SAPSR3/<pwd>@UBQ' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance UBQ is running on UBSQAS with ORACLE version 10.2.0.2.0 since 20081109
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20081110 190110 UBSQAS
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip
I MtxInit: 7 0 0
M SHM_PRES_BUF###(addr: 0xffffffff6c400000, size: 4400000)
M SHM_ROLL_AREA##(addr: 0xfffffffe56000000, size: 134217728)
M SHM_PAGING_AREA##(addr: 0xfffffffe50000000, size: 67108864)
M SHM_ROLL_ADM###(addr: 0xffffffff7000a000, size: 2672386)
M SHM_PAGING_ADM##(addr: 0xffffffff77a00000, size: 656416)
M ThCreateNoBuffer##allocated 572152 bytes for 1000 entries at 0xfffffffe48004000
M ThCreateNoBuffer##index size: 3000 elems
M ThCreateVBAdm##allocated 12176 bytes (50 server) at 0xffffffff77900000
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 7 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 7, WP_CNT = 12, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0xfffffffe42000100, size: 30000000, end: 0xfffffffe43c9c480)
B dbtbxbuf: Buffer TABLP (addr: 0xffffffff6b800100, size: 10240000, end: 0xffffffff6c1c4100)
B dbexpbuf: Buffer EIBUF (addr: 0xffffffff65800108, size: 4194304, end: 0xffffffff65c00108)
B dbexpbuf: Buffer ESM   (addr: 0xffffffff65000108, size: 4194304, end: 0xffffffff65400108)
B dbexpbuf: Buffer CUA   (addr: 0xfffffffe4b01e108, size: 3072000, end: 0xfffffffe4b30c108)
B dbexpbuf: Buffer OTR   (addr: 0xffffffff64800108, size: 4194304, end: 0xffffffff64c00108)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x106ab5bb0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0xfffffffe4b30e070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0xfffffffe4b30e548
S    using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2168 bytes
S immediate print option for implicitely closed spool requests is disabled
A Mon Nov 10 19:01:11 2008
A
A     PXA
A PXA INITIALIZATION
A PXA: Fragment Size too small: 73 MB, reducing # of fragments
A System page size: 8kb, total admin_size: 11048kb, dir_size: 10992kb.
A Attached to PXA (address 0xfffffffe20000000, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A     PXA
A
A ABAP ShmAdm attached (addr=0xfffffffe60590000 leng=20938752 end=0xfffffffe61988000)
A >> Shm MMADM area (addr=0xfffffffe6083edd0 leng=140480 end=0xfffffffe60861290)
A >> Shm MMDAT area (addr=0xfffffffe60862000 leng=17981440 end=0xfffffffe61988000)
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects##allocated 12676 bytes at 0xffffffff77700000
N SsfSapSecin: putenv(SECUDIR=/usr/sap/UBQ/DVEBMGS12/sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/UBQ/DVEBMGS12/exe/libsapsecu.so .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W    ipl_Init(): wp task type is 4:BTC, skip initialization
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
B
B Mon Nov 10 19:30:28 2008
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B   max_blocking_factor = 15, max_in_blocking_factor      =   5,
B   min_blocking_factor = 10, min_in_blocking_factor      =   5,
B   prefer_union_all    =   0, prefer_join                 =   0,
B   prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B   convert AVG         =   0, alias table FUPD            =   0,
B   escape_as_literal   =   1, opt GE LE to BETWEEN        =   0,
B   select *            =0x0f, character encoding          = STD / <none>:-,
B   use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B                         rule_fae->0, concat_fae->0, concat_fae_or->0
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 0xffffffff78500000
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 0xffffffff78500768
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 0xffffffff785007a0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 0xffffffff785007ac
A
A Mon Nov 10 20:04:25 2008
A WP has reached abap/heaplimit = 40000000 bytes
A
A Tue Nov 11 02:25:41 2008
A generated report /1BCWDY/BSAEKROD3IX58HSBOTLJ==CP         with fingerprint 1078C98BF377F2618A7F4843DE257FC8   50556
Tue Nov 11 02:36:40 2008
actual OCI-type (1) of OUT-variable 0 differs from cached statement (96) ==> reparsing
sc_p=0x10673a550,no=176,idc_p=0x106750c68,con=0,act=1,slen=149,smax=768,#vars=5,stmt=0x107ba9dc0,table=TADIR
prep=1,lit=0,nsql=0,lobret=0,#exec=455,dbcnt=0,upsh_p=(nil),ocistmth_p=0x1073f3ec0
IN : cols=5,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=108,vmax=32,bound=1,iobuf_p=0x1068680e0,vda_p=0x1073f8960
      lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=1,rsize=0,vmax=32,bound=1,iobuf_p=(nil),vda_p=0x1073f90f0
      lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
SELECT /*+ FIRST_ROWS */ "OBJ_NAME" FROM "TADIR" WHERE "PGMID" = :A0 AND ( "OBJECT" = :A1 OR "OBJEC\
T" = :A2 ) AND "OBJ_NAME" = :A3 AND ROWNUM <= :A4;
actual OCI-type (96) of OUT-variable 0 differs from cached statement (1) ==> reparsing
sc_p=0x10673a550,no=176,idc_p=0x106750c68,con=0,act=1,slen=149,smax=768,#vars=5,stmt=0x107ba9dc0,table=TADIR
prep=1,lit=0,nsql=0,lobret=0,#exec=2,dbcnt=0,upsh_p=(nil),ocistmth_p=0x1073f3ec0
IN : cols=5,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=108,vmax=32,bound=1,iobuf_p=0x1068680e0,vda_p=0x1073f8960
      lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=1,rsize=0,vmax=32,bound=1,iobuf_p=(nil),vda_p=0x1073f90f0
      lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
SELECT /*+ FIRST_ROWS */ "OBJ_NAME" FROM "TADIR" WHERE "PGMID" = :A0 AND ( "OBJECT" = :A1 OR "OBJEC\
T" = :A2 ) AND "OBJ_NAME" = :A3 AND ROWNUM <= :A4;
Tue Nov 11 02:36:42 2008
actual OCI-type (1) of OUT-variable 0 differs from cached statement (96) ==> reparsing
sc_p=0x10673a550,no=176,idc_p=0x106750c68,con=0,act=1,slen=149,smax=768,#vars=5,stmt=0x107ba9dc0,table=TADIR
prep=1,lit=0,nsql=0,lobret=0,#exec=3,dbcnt=0,upsh_p=(nil),ocistmth_p=0x1073f3ec0
IN : cols=5,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=108,vmax=32,bound=1,iobuf_p=0x1068680e0,vda_p=0x1073f8960
      lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=1,rsize=0,vmax=32,bound=1,iobuf_p=(nil),vda_p=0x1073f90f0
      lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
SELECT /*+ FIRST_ROWS */ "OBJ_NAME" FROM "TADIR" WHERE "PGMID" = :A0 AND ( "OBJECT" = :A1 OR "OBJEC\
T" = :A2 ) AND "OBJ_NAME" = :A3 AND ROWNUM <= :A4;
Thanks,
Shambo

Hi Shambo
have you checked the oracle parameters as per the sap note 830576,and also the backup which you have taken is a logical backup,in that case you have to run the update database statistics either from DB13 or BRTOOLS
also check ST04 and also ST02 to do a performance tuning
I believe its more Database Parameter issue
regards
George Varghese

ECC6 upgrade phase XPRAS_UPG running for long time

Hi,
I am performing a Downtime minimized upgrade (MODPROF_TRANS) from R34.7ext2 to ECC6.0 / Windows2003/MSSQL2005
Currently i am in the phase XPRAS_UPG .It is running for really long time.I tried to reset the phase but still went on for more than 10 hrs. I initialized the phase now its running for more than 7 hours. There are no processes when i check in SM50 and no log files updated. There is no log file called XPRAS_UPG.ELG.SM37 no jobs running.
Though if it takes long time , How do i confirm that my upgrade phase is running ??????????as its not updating anything
In PARDIST_SHD phase when there was en error , i have manuall deleted the DB trigger acording to the note 956198. And the phase went on.
Now after reading few messages reg this error , i checked DB02 but no locks on any table . Have cheked note 558197,1292069,1142410,1138351,1062559,597885,551298. But nothings applicable in my case.
Please suggest ...
will really appreciate your help.
Chandra

Dear Chandra,
Regarding long runtime for XPRAS phase kindly note the following:
1. The reason of slow performance of XPRAS phase can vary differently.
Basically during XPRAS phase, there're a lot of reports to run. These
reports are inlcuded in the transport requests(both upgrade
requests and support packages). If there's a performance problem,
it very likely the database performance problem, such as wrong
access plan was chosen, or missing index, etc.
2. To find out the performance problems in the XPRAS, you can always
logon into the system. During the XPRAS phase, the system has to be up and running.
In SM50, usually you can find which report is running, and/or which table is being accessed.
If you find some table accesses take unusually long time, please
record the table name and find the SQL statement. Sometimes a simple
index can solve the problem, sometimes you need help from Oracle
to get the solution.
3. If you want to shorten the downtime, you can select less support
packages since all SPs have a lot of reports to run in XPRAS. But
remember you need to import them soon or later. But if you prefer
import them later it's fine.
Currently if you check in SM37 then you can see RDDEXECL job in active status.
Check for the job log, if there are any errors reported?
Thereafter check the SM50 and see if its taking unusually long time for some particular table.
If so then it might be because you might have not updated the statistics for that particular table.
Also check what was the parameter value of Number of batch processes defined by you
for upgrade. If you have defined very less number of batch processes for upgrade then also
it will take more time.
Check accordingly and let me know for further help.
Regards,
Abhishek
Edited by: Abhishek Srivastava on May 9, 2010 10:57 AM

Loud fan runs for long time then overheating then shutdown

About 2 months ago I started to have problems with my MacBook. It is my main machine so this is something I really want to get fixed. The new behavior: fan(s) run loud for some time, then the computer refuses to accept a charge, and then it shuts down. It seems to do this when it feels like it. It did not do this before. I have Apple Care and took it to the Genius Bar. But they said it passed all their hardware tests. I just don't see how it could be anything else but a hardware problem. What should I do?

It could be that you have some errant process running sometimes but not all the time, due to who-knows-what reason (to be discovered later if this bears out.
Have you ran Activity Monitor when it is running hot to see if there is something taking up more than a few percent of CPU time?
I don't know the likelyhood of this next idea because I have not yet had a MacBook apart but all modern computers have some kind of heat sink on the CPU and it may be that that heat sink is sometimes not making a good physical contact to the CPU chip. This has been the case on some Mac powerbooks in the past.

Full GC running for longer time

hi Team,
We are running SLD on separate hardware with Windows 2003. But since couple of months we been observing that 'full GC taking longer time' then it used to be. So wondering what are the possible parameters, configuration items that i need to look back to find tune this issue.
any good reference docs related to find tuning the GC is much appriciated.
Thanks
Sekhar

I have three basic suggestions.
1. Decrease your heap size. This will make the GC shorter but more frequent.
2. Increase the heap size to some huge number. This will make it take longer but run infrequently.
3. Use the java option to never do GC on the java startup and then force GC on a daily basis when the system is relatively unused. This also requires increasing the heap size. You may need to have a developer write something to force GC. In smaller companies, you can just restart J2ee each night but that seems like cheating.
hth

Using FPGA program to collect data for long time without 'gap'

Our data collection system has a NI-PCIe 7852R card. We want to collect data at up to 10 KHz for up to 10 to 30 minutes. The data amount is too large so we have to separated them into multiple Array and save in multiple files. We do not want to loose data during the saving time. Anyone has idea on how to do it? We would appreciate your help.
My current method:
1 using FIFO memory, in FPGA program loop , write data from AIs to FIFO memory, after certain amount of data is written, say 2000 of it, asks a IRQ.
2. In Host program loop, wait for IRQ, once the IRQ comes, read in FIFO data, do some processing, put the data into prelocated array, once the prelocated array is full, save it to the disk.
So far the method is not working.
1st, there seems never a IRQ, the wait for IRQ (invoke method) never took any time.
2nd, the FIFO reading in the host program loop seems takes no less time than the FPGA program write same amount of data into FIFO...
SO I have extra questions:
1. Does the 7852R cards and its new FPGA still support IRQ?
2. What is the reading speed of FIFO read in Host program? I thought it should be much faster than the FPGA program writing it....
Any help will be propitiated.
Thanks a lot

Here is the FPGA program block
Part of Host program block inside the loop
Part of Running results.
   1. Some data is missing in every FIFO reading in Host program
   2. The FIFO reading in Host program takes more time than the AIs=> FIFO in the FIFO program
   3. Of cause each host loop takes more time than it takes FPGA program to get same amount of data...
Attachments:
FPGA_AI_block.png ‏48 KB
HOST_AI_inloop_block.png ‏31 KB
Running result.png ‏124 KB

Report running for longer time

Hi,
I have a report in dashboard which does not stop running and the clock on it keeps on ticking.
Please suggest what must be the possible reasons that this report is taking so much time to run . So I that I can backtrack it.
Thanks.

949675 wrote:
Hi,
I have a report in dashboard which does not stop running and the clock on it keeps on ticking.
Please suggest what must be the possible reasons that this report is taking so much time to run . So I that I can backtrack it.
Thanks.Check out this presentation to improve the performance on the report: http://www.peakindicators.com/media_pi/Knowledge/obiee%20and%20database%20performance%20tuning.pdf

How to stop process chain if it yellow for long time

hello all,
I see that my process chain is running for long time and is yellow for more than last 24 hours now. I can see where the chain is stuck(not going ahead).
What do we normally do in such scenarios?
Also one more question I have is about delete PSA request process variant. Can i use the same variant in two different process chains, is yes than do I have to include the name of the PSA tables that are in both the process chains. When the variant runs in 1st chain does it delete the PSA tables from the second chain as well..(i hope i made this clear)
Thanks in advance

Once you have done with your init load manually. Then in case it was just the start of the process in ur Process Chain then first remove the chain from schedule and then go to the start process of the process chain and save the setting for immediate, uncheck the periodic box and save and then come out of the screen and then execute and activate the chain.
Note:
1. Before changing the setting in the start process make a note of the start time and also its periodic value.
2. Once the chain is completed then change the setting in the start process back to previous start time and periodic value.
3. Dont forget to save and activate the chain.
Regards,
Rohini

Interface execution going on for long time.

Hi All,
I am executing one interface and that is running for long time on one of the step.
but its underling query is easily returning rows in database.
How to check why is not completed that step.
Thanks for help.

So it means there is not such option available to check what is going inside particular execution.
But some how it got executed...after a long time.
Thanks
Nawneet

Cannot use PhotoShop CS6 after trial expired, even after purchasing Creative Cloud Student Edition

Hi.
I had PhotoShop CS6 trial, which expired.
I have purchased Creative Cloud student edition, I receive a message that my PhotoShop trial has expired.
I am prompted to purchase the product to extend it, or type in the product's serial number
(I never received a serial number.)
I paid for Creative Cloud and have an order number, I should not be having this issue.
I have uninstalled and reinstalled PhotoShop CS6 multiple times, I also use DreamWeaver and am fearful that I will encounter the same issue. How can I use the Photoshop CS6 after I have paid for it?
Curonda in Milwaukee, WI.

Hi.
The trial expired 2 weeks ago - Monday.
I purchased the Cloud Yesterday, also 2 weeks ago Monday 10/15/2012.
I purchased it twice thinking 1 purchase did not complete.
I still will need to request a refund for 1, I've been too busy between, work, school, and kid. I'm at work now.
Miss Curonda
...Remember, happiness is not a mood its a decision.
Date: Thu, 25 Oct 2012 05:59:51 -0600
From: [email protected]
To: [email protected]
Subject: Cannot use PhotoShop CS6 after trial expired, even after purchasing Creative Cloud Student Edition
Re: Cannot use PhotoShop CS6 after trial expired, even after purchasing Creative Cloud Student Edition created by Nikhil Bisne in Trial Download & Install FAQ - View the full discussion
Curonda,
Can you let us know the date when your trial expired and when you bought the Creative Cloud Subscription?
Thanks
Nikhil
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4799512#4799512
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4799512#4799512
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4799512#4799512. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Trial Download & Install FAQ by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem building record set using Dreamweaver CS6 Cloud Product

I am having a problem building a Results Page using Dreamweaver CS6. I have followed all the steps described in Dreamweaver/Build Search and Results Page Article (multiple times). It seems that when I save the Results page it does not copy the php used to build the dynamic table. In fact when I view the source, I do not see any php code.
Additionally, when I attempt to bind the record set, it also does not accept the Default Value(s). Enstead it gives me a list of all data in the colum(s) chosen for the record set (using Where..LIKE..variable definition).
Any suggestions?
Regards,
Norv

Yes, I will be glad to go through each step. I will also provide code.
Step 1: Built the Search Page by adding Form into exisitng htm page. Used Insert> Form>Form to insert Form area. Then added three (3) text fields using Text Icon from the Form Menu Bar (Classic View).
Step 2: Added a Submit and Reset Button to the Search Page. Again used the Form Menu Bar to create the Buttons.
Step 3: Selecte the <form> tag at bottom of Document Window to point Form to the Results Page (using the Action Box.
Saved page and then began building the Results Page using an existing htm page. Saved the Results Page as a .php document.
Results Page: Here are steps taken to build Results Page (Code will follow):
1/ On the Results Page created a Recordset using the bindings dialog box. Used the Advanced Recordset Dialog Box. In the Advanced Dialog Box I used the Select and Where features to create a Recordset that created a 3 column table (records.County, records.ListPrice, records.PropertyType). In the Variable box I created 3 variables (varCounty, varListPrice, varPropertyType). varCounty and varPropertyType parameters are text (Type) and % (for Default Value). varListPrice parameters are floating point (type) and % (for Default Value). RunTime Value is $_REQUEST["ColumnName"].
Here is the Code generated by Dreamweaver. Note, I am not including the code to access the database, because in all tests I am able to access the table. In fact first time I built the dynamic table, everything worked and I saw the Colum and default value. Have never been able to duplicate that effort. :-)
Here is code:
<?php
if (!function_exists("GetSQLValuestring")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION<6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) :
mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "". $theValue ."" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "". $theValue ."" : "NULL";
break;
case "defined"
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$varCounty_rslistings = "%";
if (isset($_GET["County"])) {
$varCounty_rslistings = $_Get["County"];
$varListPrice_rslistings = "%";
if (isset($_GET["ListPrice"])) {
$varListPrice_rslistings = $_GET["ListPrice"];
$varPropertyType_rslistings = "%";
if (isset($_GET["PropertyType"])); {
$varPropertyType_rslistings = $_GET["PropertyType"];
mysql_select_db($database_MyDB, $MyDB);
$query_reslistings = sprintf("SELECT records.County, records.ListPrice, records.PropertyType FROM records WHERE records.County LIKE %s AND records.ListPrice LIKE %s AND records.PropertyType LIKE %s", GetSQLValueString($varCounty_rslistings, "text"),GetSQLValueString($varListPrice_rslistings,"double"),
GetSQLValueString($varPropertyType_rslistings,"text"));
$rslistings = mysql_query($query_rslistings, $MyDB) or die(mysql_error());
$row_rslistings = mysql_fetch_assoc($rslistings);
$totalRows_rslistings = mysql_num_rows($rslistings);
?>
That's the code that was generated by Dreamweaver.
Thanks in advance for your assistance

Cannot use the CS6 blur filters with Mountain Lion

Cannot use the CS6 blur filters with Mountain Lion since I cannot see the circle and other adjustement lines of the UI. I had no problems using these filters with Lion. Could you help.
Thanks

Slateskies wrote:
... I'm doing this because of a new game that requires OS 10.6.8. ...
Why not just Upgrade to 10 6 8 which is Snow Leopard...
First you need to check that your current Mac meets the System Requirements for Snow Leopard...
Snow Leopard Specs:
http://support.apple.com/kb/SP575
If it does... then you need to Purchase and Install Snow Leopard Disc,
Mac OS X 10.6 Snow Leopard
( It should be noted that Apple will send paid MobileMe members the Mac OS X 10.6 DVD for free.)
Would Also Recommend that you do a Bootable Clone Backup of your current Hard Drive Before attempting any Major Upgrade...
By far the easiest way to make a Backup, is to use something like
SuperDuper http://www.shirt-pocket.com/
or CCC http://www.bombich.com/

Slideshow using dreamweaver CS6

Have received advice here and created a slideshow using jQuery Cycle2. Loaded own images and working fine on a dreamweaver blank page.
When I load onto a fill page as a banner heading the slideshow reverts to 3 or 4 separate images. Any ideas please?

Sorry. Should have come back earlier. Any chance you could look at code in
these two attachments and tell me why the' letters for baneer ' works and
yet the identical (as far as I can see) 'using find' doesn't go through any
transition. I think I have followed the three points made below.
Thanks and apologies,
NB
In a message dated 04/11/2013 18:59:39 GMT Standard Time,
[email protected] writes:
Re: slideshow using dreamweaver CS6
created by Nancy O. (http://forums.adobe.com/people/Nancy+O.) in
Dreamweaver support forum - View the full discussion
(http://forums.adobe.com/message/5813956#5813956)

Cannot use Dreamweaver CS6 because of "running for long time" script issue

Similar Messages

Maybe you are looking for