Cannot use File Sharing Between Two Macs Running tiger

I have a G3 Desktop and a Platinum powerbook connected wirelessly using an Airport Extreme. I used to be able to easily share files between the two Macs but since upgrading to Tiger on both machines and loading the latest software upgrades and Airport firmware, running Disk Utility, setting preferences to turn on AppleTalk and file sharing, file sharing does not work. It worked one time after downloading the new Airport firmware but now I cannot find the other computer on the Airport network. There are only two computers on the Airport network. Does anybody have any ideas?

Problem solved by reading the reply to dkolenda's post earlier today. I turned off UDP traffic blocking inthe firewall settings and now both computers can see each other and share files.
Thanks!

Similar Messages

  • Setting up file sharing between two Macs

    Just bought a new MBP. My wife will use the old MBP. Both running 10.9.4
    Hers shows under ‘Shared’ in my Finder & mine in hers.
    On clicking ‘Connect As’ from either laptop we are asked for a password.
    I must be overlooking something basic, but for the life of me cannot work out how to set the password.
    I have been into System Preferences/Sharing preferences & tried to add her as a user  & vice versa. I can add each of us to the other’s list of users, but when either of us tries to connect & are prompted to enter a password, the password is rejected. Like wise if I go into File sharing ‘Options’, & find the user name in the account list (only he & me) on hers I am unticked & on mine she is unticked.
    When I tick either box I am prompted again to enter a password (for SMB). Again on entering the password it is rejected.
    What am I doing wrong?
    Thanks.

    Ian Lock wrote:
    MrHoffman, by ‘log directly’ do you mean can I sit at my wife’s (or my) mac, type in the login passwords at the login screens & gain access? If so the answer is yes.
    These are the same passwords I have been trying to use to log in to file sharing from the connect as box in Finder.  Same result both ways. Password rejected/password input box shakes.
    Yep.  That was the test.
    Launch Console.app from Applications > Utilities on the target Mac, and then see if there are any messages logged when the incoming Finder connection to that target Mac fails.  (Please don't post more than a dozen or two lines and definitely please don't dump hundreds of lines of console output here.  Remove repeating blocks, and — if you do post that data here — please check for any confidential or sensitive information before posting it.)
    Also, if there are any add-on "anti-malware" or "anti-virus" tools, or I/O "enhancement" tools, or tools that claim to "optimize", "protect", "clean" or "tweak" your Mac, please remove all of those.   Use the tool-specific procedures to remove those.  If you're not sure, download and run and post the output from Etrecheck, and we'll have a look at the software configuration.  (Etrecheck also tries not to display anything sensitive, but do review that output before posting it here.)

  • File Sharing between two macs

    Hello and happy new year everyone!
    I have a MBP running Snow Leopard and i recently bought an iMac running Lion. I would like to set up a network at home to easily transfer my data. What i did was to enable file sharing in both machines (connected to the same wifi network). My problem is that the two machines never appear on the Finder left bar "Shared" folder. But they are actually connected! I can access my iMac for example, indirectly, if i enter its local address on safari (afp://192.168.1.19 ).
    To sum up, this is not so convenient to do each time and i would like my machines to appear on the finder. Any ideas why that doesnt happen?
    Thanks a lot for your help
    Dimitris

    I recommend that you append a suffix to your User Name so that the OS can differentiate between the two computers ie Name1_A, Name1_B.
    I maintain 50 iMacs/eMacs in a High School Video Production class.
    The Teacher's Name was the same on ALL computers for Admin account. When I setup an Airport Wireless Server the Network could not recognize the different computers for Program/File Sharing until I renamed each computer's Admin Account with a different name - Teacher Name_A to Teacher Name_ZZ.
    Once this was done then the Network could recognize the different computers and open the Program/File Sharing items for each computer.

  • File sharing between two Macs wirelessly

    Hi I want to share files over my local network via a WI-FI internet connection that both my Macs are connected to. I read some blog posts about how to turn on file sharing on both machines in Network Prefs but still the finder sidebar does not show the other Mac. What am I doing wrong?
    cheers
    Simon

    On the Mac that you want to share, turn on File Sharing in +System Preferences > Sharing+
    Also make sure that your firewall is not blocking incoming connections. Check this in +System Prefs > Security > Firewall > Advanced+
    Then you should be able to log on from another Mac by doing +Go > Connect to Server > Browse+ This will enable you to log on to the Mac whose file sharing is turned on.
    If you want +both Macs+ to share their files, and allow each Mac to log on to the other, then you have to turn on File Sharing and check your firewall settings on both Macs

  • File sharing between two mac

    I have iMacG5 OSX 10.4.8 and a PowerBook G4.Previously I could see the other's desktop and could transfer/drop etc. files to it.With cmd+k I get only the Drop Box but with the warning :could not opened because you do not have sufficient access privileges.I forgot the setting.Please let me inform how to set to see and use e.g. from my iMac the Power Book desktop.
    Many thanks in advance
    Robert

    See Knowledge Base Article http://docs.info.apple.com/article.html?artnum=106461 Mac OS X: About File Sharing

  • Wireless file sharing between two MacBooks

    I feel like this is kind of a silly question, but here goes:
    Is it possible to set up wireless file sharing between two macs when there is no wireless network available.
    For example, if I am on a plane (with no wi-fi) and wan to wirelessely connect to my partners macbook to browse his hard drive, can I do it? Right now, I use a firewire cable when flying, but would love to not have to.
    Thanks for the help.
    Message was edited by: kr and cr

    Yes, it's possible to do.
    You setup one of the Macs to act as a base station of sorts. If you've got the AirPort Status menu shown you can just use the 'Create Network…' option in that menu to create a new wireless network hosted on this Mac. Just tell the other Mac to connect to that network using the name and security credentials you specified when you created the network, and you're done.

  • TS2972 is it possible to use home sharing between two users on the same computer?

    My wife and I have itunes accounts and want to be able to share music we have each bought on our accounts. We have tried setting up the home sharing on our PC but it doesn't show up on the screen. Can anyone please help?

    "Is it possible to use home sharing between two users on the same computer?"
    No. Home sharing is used to connect two running instances of iTunes across a network. When you switch users on the computer all applications running on the other profile are suspended.
    You can however share your respective media folders so that they are visible in either profile and then copy over any content that you want, or you could create a single joint library which you use when either user is logged in.
    tt2

  • Can I create a wireless LAN and file sharing between two household Macs?

    I've got an iMac G5 running 10.4.11 and an Intel iMac running 10.5 and was wondering if I create a wireless Local Area Network and file sharing between my two household Macs?

    I have a network set up for my mom using an old blue iMac with an airport card as the base station. I'm using Tiger on the machine, but you should be able to do this on Leopard, too. She's 700 miles away, and I did it quite a while ago, but it seems I set everything up using the Airport Utility. At one point I think I had Internet Sharing on, too, but I don't remember if that's still on. Haven't needed to use file sharing on the network, but my G4 and her boyfriends MacPro happily use the network via Airport. I'm guessing you could share files that way. If it doesn't work, an Airport Express is a less expensive option for the router, at least cheaper than an Extreme.

  • File Sharing creamed two Macs

    How we creamed two Macs running Leopard, and how we got them back.
    My husband got a new early 2008 MacPro and gave me his iMac. Initially we tried to use the Migration Assistant to move his data, but that hung, and caused us to have to start over. Then we moved over mail and other files, booting the iMac in transfer mode. But, after the majority of the data was moved, I wanted to move the iMac to a different room. So, I had the bright idea to share the Macintosh HD on the iMac, so he could see what applications he used to have, and move over any data files he needed. For some reason, I also decided to share the MacPro HD. The share access was read only.
    Then I read that it was not a good idea to share the HD, as someone coming in over the Internet could gain access. We do have a router, but I like to be safe. So, I took the sharing off the iMac. I unclicked sharing, and removed "Everyone" from the sharing and permissions. I put the iMac to sleep that night, and it woke up fine the next day. I did notice the printer wasn't working, and the scanner, but thought it was something I did not understand about Macs. So, thinking everything was okay, I did the same thing to his machine.
    He came in and immediately noticed some USB devices had been dropped, so rebooted. Or tried to. The MacPro would not reboot. About this time, I tried to run Repair Disk Permissions on the iMac and it hung for over an hour. We called Apple Support on the MacPro. They had us try resetting the pram and several other things and nothing worked. Then they told us to do an archive and restore. This has never worked for us. We had previously tried it many times with the iMac (later zeroed the disk and all was fine from then on). The support person knew we had a disk clone about 4 days old and Time Machine, but did not suggest using them. When the archive and restore failed, we went to Time Machine. We did not do it in the most efficient manner, but did get it done, and everything now appears to be fine, except, of course, we still have file sharing on both the Mac HDs. * And the Apple Support person insisted that changing the file sharing could NOT have caused this problem. Said he had many customers do it. This was the only thing we had done, and for both machines to fail in almost the same way...we are SURE it was the file sharing.
    I also ordered a new external firewire disk drive so that I would have a clone as well as Time Machine. I have also turned on the firewall.
    If someone has had the same problem, and solved it, I could try it on the clone.
    The morals to this story: 1) if you get a new Mac, and need to transfer data, don't be in too big a hurry to give up transfer mode 2) Don't share your HardDisk, or if you do, don't unshare it 3) Have a plan restore plan in place - know how you are going to use Time Machine to recover from a catastrophic failure 4) Use Time Machine, it is wonderful!

    HI Alex are you
    sharing these two MACS over ETHERNET , WIFI, BTooth , FWire or other?
    using the default AFP or possible SMB/CIFS (wondoze fs) to share. You would have had to specifiy this.
    can you log into the users on each of the MACs individually - resolve that you access is correct
    By default if each mac's users  that you need are SHARED theough their individual SYSTEM PREFERENCES/SHARING/ FILE SHARING = ON, then they will appear vua BONJOUR (.local) on the local LAN and in each othes FINDER. You should see it also in the OSX 10.5.8 systems's finder.
    If the above is true, each mac should be able to DROP items in the other mac users on the others HOST's PUBLIC/Drop Box folder in their home directory  (~/Public/Drop Box). There is no need to log into each others user. Simply drop the objects in to the others PUBLIC/Drop Box folder
    This works simply and is also no need to go to any extremes to set up.
    That user can then access it in r/w mode.
    Anyway post back on the above. Lts see if we can resolve it.
    Post your results for others to see.
    Warwick

  • File Sharing between 2 macs

    I am trying to enable file sharing between my new iMac and my (2007) model Macbook Pro. I am succesfully able to share files from the old mac to the new one, as I can connect via the macbook,  but when I try and connect from the new Mac it "fails".   Everything is set up in System Preferences ok (I think) and I have restarted both macs, but still not conecting via the new mac. Any ideas on why this is happening?
    iMac, Mac OS X (10.7.5)

    How does if 'fail'?

  • Using file sharing between iMac and Macbook Air

    I have been trying to use file sharing but do not have admin password or disc..When I try to access the iMac from my Air it give the option of using my Apple ID but no password field comes up...I press enter and get the Dialog Box wobble...

    I have tried using the guest login but get the message "Access denied to this server, contact administrator". I can access the Air from my iMac but even though they are both running Mavverick some of the dialog boxes appear different. And thats even though I have enabled guest login on the iMac

  • How do you turn off sharing between two macs?

    How do you turn of sharing between to macs ?

    Don't choose the apps to sync and turn off automatic downloads.
    iTunes Store: How to enable Automatic Downloads - Support - Apple

  • Leopard cannot see hard drive on any Mac running Tiger.

    Running Leopard 10.5.2 on a Mac Pro 3GHz 4-core w/6GB RAM. I cannot connect to any hard drive / root directory on any Mac on my network running Tiger (10.4.9, .10 or .11) or OS9. Yes I have an Avid Meridian in the edit suite runing OS 9.2.2. No laughing please...
    I can connect to the User folder on any Mac running Tiger but not any hard drives on any Mac running Tiger from a Mac running Leopard. The hard drive cannot be accessed from a User folder even if an alias of the Tiger drive is placed in the ~/User/Public folder.
    The reverse works as usual. Any Mac running Tiger can see any hard drive on any networked Mac including Macs running Leopard.
    Has anyone else encountered this issue &/or found a workaround? I spent almost 2 hours with Apple Tech Support including a system specialist. They confirmed this behavior in Leopard connected to Tiger OS Macs. Hard drives can be seen between all Macs running Leopard. It was theorized by one of the Apple techs that the behavior was engineered to encourage upgrading all Macs to Leopard. BAD idea! I requested this be reported to Apple engineering.
    Tiger can see any drive on the network back to OS7. Leopard cannot see previous OS version hard drives.
    TIA for replies.

    I suggest that you repeat the external boot process with your MBP.  If it boots the MBP, the internal SATA cable probably is faulty and should be replaced.
    Ciao.

  • Problem conecting  and  file-sharing between two net-worked macs

    I have a Mac Pro (in an out-building in my back-garden) and an Imac (in the house) connected by a long ethernet cable (must be at least 20 metres).
    I used to have no trouble connecting one to the other till recently. I still usually have no trouble connecting to the Internet from the Mac Pro using the Imac's internet connection (wireless). The problem is in clicking on the Imac connection to open it in order to share files (also using "connect to server" in Go menu).
    Much of the time (but not absolutely always), it refuses to connect, and I get a "failed connection message" (or something like "server does not exist" if using other method).
    Sometimes, I can connect successfully, not just as a guest but after entering admin password, and then short time later the connection will disappear. When this happens, the Imac icon previously visible in the finder window also disappears. Unplugging and replugging the ethernet cable has no effect. Once I was using Itunes shared library to play a song on the Imac, and the song just suddenly disappeared.
    Just now, after the Mac Pro-to-Imac conection failed again, I substituted my Ibook for the Imac in the house, and there was no problem at all connecting both ways between it and the Mac Pro. I then reconnected the Imac to the Mac Pro and it too connected fine. This proved at least that the ethernet cable was not at fault, but no doubt the problem will re-occur.
    I have tried experimenting with the Firewall settings on the Imac, e.g. to "allow all incoming connections" or to "set access for specific services"( the latter is my usual setting on the Imac), but it made no difference. Also, the Ibook has no trouble at all connecting to the Imac when the Imac firewall is set to "specific services" so why should the Mac Pro have a problem (I admit I am a little uncertain about the best setting for the Firewall, but believe "specific services" to be correct).
    File-sharing options in system prefs on the Imac are clearly properly set-up or there would never be any connection at all.
    Often, although the Mac Pro to Imac connection will not work, the Imac to Mac Pro will, although not today, when the Mac Pro icon similarly was not present on the Imac.
    As stated, I am pretty sure that all the time the internet connection from Mac Pro to Imac still works (Mac Pro shares Imac conection).
    None of this appears to make much sense and am wondering if anyone has advice.

    Hi,
    It might be me but I don't think I have fully understood the "My Name's iMac" bit.
    If you mean (my Name) iMac as opposed to (My Name) iBook or Shed computer then that is a separate issue I will describe below
    Does the "My Name" bit mean like mine does in this pic ?
    As you can see I have used the Edit Button to change the Name of this G4 to RalphG4
    In System Preferences > Network > (Connection method) > Advanced Button > WINS tab I see this on my G4
    I have in fact used the same "Computer name" here (As in RalphG4)
    My MacBook Pro has had the Netbois Name changed to Macbook Pro
    It shows in the G4 Shares as that.
    The Finder's Preferences are set to Display the Bonjour and SMB shares that I can see as I have a Mixed PC and Mac Network here
    (Currently only the MacBook Pro is On as well)
    SMB Shares are not on in the MacBook Pro settings so it shows as a Mac Server (Highlight and do a Get Info)
    Two Computers with Same Name
    In Bonjour when two computers end up with the same name (As my two did originally) these double name issue cannot be resolved and the computer may be "Seen" briefly before it then disappears
    I have not tried it with SMB shares on my two Macs having had issues with Bonjour.
    (Note: iChat goes one step further.
    Even if the computer names are different iChat uses the Name in the My Card spot in the Address Book to show as the Buddy Name in the Bonjour Buddy List.
    It cannot resolve this if both computers are logged in as the same Person.)
    Another reason why a computer may show up twice is how it or they are connected.
    Lets say that all are connected to a router either by Wifi or Ethernet.
    They will be then seen once.
    If one computer is connected by Ethernet and Wifi at the same time then it will be shown twice as each appearance is linked to the Media Access Card it is using and the IP it uses for each connection.
    This can also happen if one is linked directly to another with an Ethernet connection or Wifi whilst doing the other to the router.
    Back to the naming thing again.
    It is better to use the Edit Button (Arrowed in Blue above) (.Local Name) rather than trying to change the computer's Name (Ralph Johns's Computer) as this is less reliable in later versions of the OS.
    8:52 PM Sunday; August 29, 2010

  • Microsoft files Read-only when sharing between two Macs

    I'm trying to share Excel files between my Macbook and my iMac. The files are located on my macbook and I've given read/write permission to the folder containing the files. When I try to open the files on my iMac they open as read only. This happens with Excel, Word and Power Point files.
    How do I configure the file sharing so I can open Microsoft files without them being Read only.
    I'm using Office:mac 2004 and both the Macbook and iMac are running OS X (10.5.6)

    There have been occassions where I have wanted to transfer something from the MBP to the Mini or vice-versa over wi-fi and have encountered problems. I suspect this is because I am using the same user account and they get confused.
    Could you please explain, what kind of problems exactly you encountered? Error messages? Corrupted files? And why do you think the problem is caused by the same user profiles?
    Like markwmsn I have no problem with sharing using the same account name on all my macs. Only since upgrading to Mt. Lion I usually use AirDrop to send single files. That saves the trouble to copy the files to a public folder.
    Do both your macs support Air Drop?
    OS X Lion: Share your files with others near you
    and the requirements:  HT5444
    Regards
    Léonie

Maybe you are looking for