Cannot use GPU acceleration with 64 bit CS5 under 64 bit Windows 7 with two cards ATI & nVidia

Subject sums up the problem, but here are the details:
My ATI is a 5850, and I have drivers 10.6 installed. That's my primary card connected to my main monitor.
The second card is an nVidia GTS 250 connected to my second monitor with 258.96 drivers.
CS5 does not detect my GPU(s), hence, does not enable GPU acceleration. It says:
"Graphics hardware acceleration is unavailable. You will need to upgrade your video driver and possibly your video card" both of which are obviously wrong, since I have the latest CS5 supporting drivers installed for two cards that can run GPGPU applications!
Any suggestions?
Thank you.

function(){return A.apply(null,[this].concat($A(arguments)))}
nzkiwi wrote:
I'm curious about whether the requirement to support HLSL Shader Model 3.0 is a big part of what is holding back GPU acceleration support for ATI cards in Adobe products. It seems that HLSL Shader Model 3.0 is NVidia/Intel proprietary, whereas GLSL is an open standard like OpenGL.
What ATI support do you find being held back? Just curious. I ask because I have a 2 year old ATI 4670 card that supports Photoshop nicely. The Catalyst software seems to have embraced whatever's necessary to run Photoshop.*
-Noel
* That said, I see a specific bug where sometimes the 32 bit drivers on my x64 system will not be recognized by Photoshop 32 bit as OpenGL-capable at Photoshop startup. I've reported it to ATI, and they seem to have taken it seriously, so I expect a fix in a future version. The 64 bit drivers always satisfy Photoshop's needs, so I'm sure it's not a design deficiency but just a lil' ol' bug.

Similar Messages

How did I get better compression when using GPU acceleration?

Hello,
I was just making a short, 1:12-long video encoded as H.264 in an MP4 wrapper. I had edited the video in Premiere Pro CC, and was exporting through Adobe Media Encoder at a framerate of 29.97 FPS and a resolution of 1920x1080. I wanted to do a test to see how much GPU acceleration benefits me. So, I ran two different tests, one with and one without. The one with GPU acceleration finished in 2:09. The one without it took 2:40, definately enough to justify using GPU acceleration (my GPU is an NVidia GTX 660 Ti which I have overclocked). I am sure my benefits would be even greater in most videos I make, since this one had relatively few effects.
However, I checked the file sizes out of curiosity, and found that the one made with GPU acceleration was 175 MB in size, and the other was 176 MB. While the difference is pretty small, I am wondering why it exists at all. I checked the bitrates, and the one made with GPU acceleration is 19,824 KB/s, whereas the other is 19,966 KB/s. I used the exact same presets for both. I even re-encoded the videos again just to test it and verify the results, and the second test confirms what the first showed.
So, what I am wondering is: What is it that made this possible, and could this be used to my advantage in future productions?
In case it is in any way relevant, these are my computer's specifications:
-Hardware-
Case- MSI Interceptor Series Barricade
Mainboard- MSI Z77A-G45
Power Supply Unit- Corsair HX-750
Processor- Third-Generation Quad-Core Intel Core i7-3770K
Graphics Card- ASUS NVidia GeForce GTX 660 Ti Overclocked Edition (with two-gigabytes of dedicated GDDR5 video memory and the core overclocked to 1115 MHz)
Random Access Memory- Eight gigabytes of dual-channel 1600-MHz DDR3 Corsair Dominator Platinum Memory
Audio Card- ASUS Xonar DSX
System Data Drive- 128-gigabyte Samsung 840 Pro Solid-State Drive
Storage Data Drive- One-terabyte, 7200 RPM Western Digital Caviar Black Hard Disk Drive
Cooling System- Two front-mounted 120mm case fans (intake), one top-mounted 120mm case fan (exhaust), and a Corsair Hydro H60 High-Performance Liquid CPU Cooler (Corsair SP120 rear exhaust fan)
-Peripherals-
Mouse- Cyborg R.A.T. 7
Keyboard- Logitech G110
Headset- Razer Tiamat Elite 7.1
Joystick- Saitek Cyborg Evo
-Software-
Operating System- Windows 8.1 64-bit
DirectX Variant- DirectX 11.1
Graphics Software- ASUS GPU Tweak
CPU Temperature/Usage Monitoring Software- Core Temp
Maintainance Software- Piriform CCleaner and IObit Smart Defragmenter
Compression Software- JZip
Encryption Software- AxCrypt
Game Clients- Steam, Origin, Games for Windows LIVE, and Gamestop
Recording Software- Fraps and Hypercam 2
Video Editing Software- Adobe Premiere Pro CC
Video Compositing/Visual Effects Software- Adobe After Effects CC
Video Encoding Software- Adobe Media Encoder
Audio Editing/Mixing Software- Adobe Audition CC
Image Editing/Compositing Software- Adobe Photoshop CC
Graphic Production/Drawing Software- Adobe Illustrator CC

As I said in my original post, I did test it again. I have also ran other tests, with other sequences, and they all confirm that the final file is smaller when GPU acceleration is used.
Yes, the difference is small but I'm wondering how there can even be a variable at all. If you put a video in and have it spit it out, then do that again, the videos should be the same size. It's a computer program, so the outputs are all based on variables. If the variables don't change, the output shouldn't either. For this reason, I cannot believe you when you say "I can, for example, run exactly the same export on the same sequence more than once, are rarely are they identical in export times or file size."

Does LR2 use GPU acceleration? Other system requirements?

Does LR2 use GPU acceleration as Photoshop CS4 does?
Do you think this machine will run LR2 for some time to come:
Dell Studio with Intel Q9400 quad core; 8GB RAM; 750GB hard disk.
Currently using integrated graphics, but there is a PCI x16 slot available.

>Does LR2 use GPU acceleration as Photoshop CS4 does?
No
>Do you think this machine will run LR2 for some time to come:
Yes that's more than beefy enough. To use that 8 gigs, make sure you run 64-bit windows vista on it.

AME takes a long time to start encoding when using GPU Acceleration (OpenCL)

Have had this issue for a while not (current update as well as at least the previous one).
I switched to using GPU Hardware Acceleration over Software Only rendering. The speed for the actual encoding on my Mac is much faster that software only rendering. However, more often than not, the encoding process seems to stick at 0% waiting to start for a long time, say anywhere from 1 minute to several minutes. Then it will eventually start.
Can't seem to find what is causing this. Doesn't seem related to any particular project, codec, output format or anything else I can see. I'd like to keep using GPU Acceleration but it's pointless if it takes 5 times as long to even start as rendering by software-only would. It doesn't even pass any elapsed time while it's hanging or waiting. Says at 0 until it starts. Like I said, once it starts, it's a much faster render than what the software would take. Any suggestions? Thanks.
using an iMac, 3.4Ghz, 24GB RAM, AMD Radeon HD 6970M 2048 MB

Actually, I just discovered it doesn't seem to have anything to do with OpenCL. I just put the rendering back to software only and it is doing the same thing. hangs for a long time before it starts to run. Activity monitor shows it running 85-95% CPU, 17 threads and about 615 MB of memory. Activity Monitor doesn't say its not responding, it just seems kind of idle. It took almost 7 minutes for it to start rendering.
1- Running version 7.2.2.29 of Media Encoder,
version 7.2.2 (33) of Premiere.
2- Yes, a premiere project of HD 1080 source shot with Canon 60D, output to H.264 YouTube 720, fps 23.976
not sure what you are referring to by native rendering. The rendering setting i tried now is Mercury Playback Engine Software Only if that is what you are referring to. But OpenCL gives me the same issue now.
3- H.264 YouTube 720, 23,976 - seems to happen on multiple output types
4- In Premiere, I have my project timeline window selected. Command-M, selected the output location I wanted and what output codec, selected submit to Queue. Media Encoder comes up, the project loads and I select the run icon. It preps and shows the encoding process setup in the "Encoding" window, then just sits there with no "Elapsed" time occurring until almost 5-6 minutes later, then it kicks in.

Premiere Pro CS6: GPU acceleration with GeForce GTX 600 series video cards?

Anyone know if Premiere Pro CS6 support GPU acceleration with the new GeForce GTX 600 series video cards?

1 - check the results at http://ppbm5.com/ to see which models are listed
2 - For "some" others, with at least 1Gig of video ram, use the nVidia Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a "supported cards" file

HT204291 Help! I cannot see the Airplay symbol on any of my devices anymore! I have tried following all guides and troubleshooting, but to no avail. Just cannot use the AppleTV with any of my devices.

Help! I cannot see the Airplay symbol on any of my devices anymore! I have tried following all guides and troubleshooting, but to no avail. Just cannot use the AppleTV with any of my devices.

Thanks for the link. It didn't work at first on any of the devices but then I decided to enter a manual DNS instead of an automatic configuration. Then followed the steps again from your link and it worked.
It is not stable though as I need to reset the device for it to see the airplay. But when it is connected it stays connected for 30 minutes approx.
Any other suggestions to keep it stable would be fantastic but at least in the meantime I have a workaround.
Thanks

I cannot use downloaded ringtons with my Contacts.Ringtones downloaded by programme Ringtones

I cannot use downloaded ringtons with my Contacts.Ringtones downloaded by programme Ringtones

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

GPU acceleration with the nvidia 680M card?

Should i have GPU acceleration with the nvidia 680M card? i believe the 680 is supported but is the 680M supported? If not, any plans to support this card in the next update?

I navigated to the cuda support folder and added the Nvidia 680M to the list. The i went to the Nvidia settings and changed the Adobe premiere setting to compatibility mode. Opened my project and began editing. It crashes after a few seconds.
I'm also getting this full screen issue that people are talking about. For example, when I minimise premiere to work in another program and go back to premiere when i'm done I get a full screen display of the frame currently in the preview window. This also happens when the computer is inactive for a time. I'll came back to the computer after a few minutes to find the view in full screen. Sometimes a double clip it and it brings back the standard editing workspace but sometimes I have to 'control, alt, delete' to start task manager, open a new window (can be anything) and navigated to that window then back to premiere. It's as if Premiere has frozen.

"You cannot use this application with this version of OS X"

Hi,
I'm getting this message when I try to open .AVI files that I uploaded from my digital camera, but I'm posting it here instead of in the Quicktime section because I believe that the cause of the problem is more general. When researching this problem, I looked at the info panel for these .AVI files, and the app listed to open them was "Quicktime Player (default) (7.1.3)". But the actual version of Quicktime that I have installed is version 7.4. If I set the file's "Open With" app to be "Quicktime 7.4", it opens fine, but the "Open With" app reverts back to "Quicktime Player (default) (7.1.3)", making the problem come back. I've also noticed that if I right-click on other apps (a PDF file, for example), and choose "Open With" from the popup menu, that I see other versions of apps that no longer exist on my machine (Safari 2.0.4, for example). I think that files associated with these older app versions may be the cause of many of the "You cannot use this application with this version of OS X" issues that have been reported here. My question is where is this list of "installed" products maintained in OS X, and is there a way that I can edit it to remove those product versions that no longer exist on my system. In my particular instance, I'd like to remove "Quicktime 7.1.3" which should allow me to set the associated app for my .AVI files to be Quicktime 7.4 with no possibility of the association reverting to an earlier version that's not only incompatible with Leopard, but also not installed on my system.
Thanks,
Ken

When you associate a file with an application, are you then clicking the "Change All" button? You can rebuild the LaunchServices database. Evidently the location of the command and the database have changed slightly in Leopard from what they were in Tiger. See this thread for the updated instructions:
http://discussions.apple.com/thread.jspa?messageID=5730491
Also, make sure you don't have the old applications archived somewhere. I've been astonished in the past at just how enterprising the system can be in finding some program squirreled away in an obscure backup folder and listing it as an option to open something.
Francine
Francine
Schwieder

Cannot use push notification with Whatsapp

Cannot use push notification with Whatsapp and pop up "Connect iTune for Push Notification" when open Whatsapp

http://www.whatsapp.com/faq/en/iphone/20950116
 Jackson

I have license for cs5.5 for mac - can I also use this same license to install cs5.5 on a windows pc?

I have license for cs5.5 for mac - can I also use this same license to install cs5.5 on a windows pc?

No. Serial numbers are platform specific and you can't have both with a single license. Only Creative Cloud is cross-platform.
Mylenium

How can I use an iPad with two itunes accounts?

How can I use an iPad with two itunes accounts?
Hi there
My partner has a works iPad, which has her works Apps on (ones that are specifically made by her company and are NOT available in the App store).
What I want to be able to do is to ALSO have my itunes account on there so that I can put all the apps I have purchased previously from my iPhone on it.
This is so I can put on VLC player (thats already in my itunes account) so I can add videos to the iPad.
How do I do this please?
I tried it before by connecting it to my mac, but it wiped everything off the iPad completely and also deleted the data settings for using 3G.
So I want to avoid this happening again the future as it had to be sent back to her head office to be sorted again.
Any advise please?
Thanks

You can't. The iPad is desgined to be a 'one user' device and only really works with one apple ID at a time.
The only way would be if she, at work and with her work apple id, downloaded your apps (repurchasing them of course).
It's not meant to be a multiple user/multiple ID device.

How do I use Home Sharing with two different apple accounts?

How do I use Home Sharing with two different apple accounts?

Morning Saintine,
Thanks for using Apple Support Communities.
Home Sharing enables you to stream or transfer music, movies, TV shows, apps, and more among up to five authorized computers in your household. To do so, you will need to Turn on Home Sharing on each computer using the same Apple ID.
Understanding Home Sharing
http://support.apple.com/kb/HT3819
Hope this helps,
Mario

How can one use Mission Control with two monitors? Please bring Spaces back

How can one use Mission Control with two monitors. With Spaces I could treat each space as a single desktop.
SyBB

I use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3.
Two things that may help you. In System Preferences > Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous.

Using a ipod with two different computers...

I just bought a new laptop and had to download itunes again but when i hook up my ipod it tells me that that ipod is already synced with another computer (my main desktop comp.). Is there a way to use my ipod with two different computers, or can you just use one computer at a time?
thanks!
Dell Inspiron 1505 Windows XP

You can use more than one computer, but you'll have to load your iPod MANUALLY if you do, otherwise it will keep erasing things to match the library it's hooked up to.
http://docs.info.apple.com/article.html?artnum=304711

Cannot use GPU acceleration with 64 bit CS5 under 64 bit Windows 7 with two cards ATI & nVidia

Similar Messages

Maybe you are looking for