Cannot use HDMI port on my Satellite P855-108

Hi all,
I have a problem with my Toshiba Satellite P855-108.
When I connect the computer to a external monitor, this works perfectly with VGA but this does not work with HDMI (see error message here: [http://s4.postimg.org/5mzl8adnx/Erreur.jpg]).
I tested on 1 computer screen and 3 TV (with the certainty that the HDMI cable is ok).
One of these TV is a Toshiba TV with REGZA-Link.
Normally, the drivers are updated.
Thanks a lot for your help

Thank you for your feedback.
Hey ! I don't know how that is possible but *I just tried again now to answer your question and it works on my screen here !*
I will try on my TV this evening and I come back to you...
Maybe an automatic Windows update solved the problem...
Keep fingers crossed for the same result with my TV ;).

Similar Messages

  • Using just the TV screen when using HDMI port?

    Hi,
    I have the Macbook Pro with retina display and I was wondering how I could use just the TV screen when using HDMI port. I don't want mirroring displays, just one on the TV.

    With the TV connected and the MBP plugged into the mains (i.e. not running on battery power) close the lid.  The MBP will go to sleep, wake it up with an external keyboard or mouse - which must be connected in advance, or paired in advance if a bluetooth keyboard/mouse.

  • I can not conect to my TV using HDMI ports.

    ?i can not conect my touchsmart 600 to my TV using HDMI ports. Do anyone knows how to fix the problem?

    HP TouchSmart 600 refers to over 200 different computer models.
    When requesting assistance, please provide the complete model name and product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the back or bottom of your computer. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
    Most HP TouchSmart computers do not have HDMI inputs or outputs. Typically, the few that have an HDMI port have an HDMI input for video player or game console input. You may need to purchse and use a USB-to-video adapter such as the EVGA UV Plus+ UV39 (or any of the many other adapters on the market) to connect an external display to your computer. I personally use and recommend the EVGA UV Plus+ UV39.
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Macbook Pro 13 (June 2011) and Sony Bravia connectivity using HDMI port.

    Hi,
    I have searched many forums and posts here and there, but no where got the perfect solution, also most of the places people are misxing the problems with other problems.
    My Problem: I am not able to see even Sovy TV in my MBP display page, and hence not able to connect to Sony Bravia to my MBP.
    What I am using: Macbok pro 13 June 2011, Lion 10.7.2, Sony Bravia 40EX550, DVI Mini Adaptor for Mac (at one side DVI male connector and other side female HDMI connector) and one HDMI cable (the cable which comes with my DTH provider both ends are for Male HDMI pin)
    I do not think i would require anything more in this.
    Now after connecting with Adaptor to my MBP i connected the other end to HDMI cable which was already connected to HD TV HDMI port (there are 4 ports and i tried all the ports)
    When i opened the System Pref -> Displays I got below screen
    Here in above screen I clicked on Detect Displays but nothing happens, actually it should detect the Sony Tv and there on I sohuld do some settings.
    Please any one can help on that. Sorry for this repeated kind of problem , but I have searched in many forums and here on discussion.apple.com also , but evywhere people are mixing 2 different problem into one, some people are not getting the display and few of them not event getting the detection of the HDTV. So I posted here for the later one.

    Right now your MBP is not recognizing the TV.  You should get a display in SYSTEM PREFERENCES>DISPLAYS similar to this.  Note the 'Arrangement option in the menu bar.  Your connections are bad or you have a faulty cable and/or adapter.
    I assume you are using a MINI DISPLAY PORT/HDMI adapter, not a DVI adapter.
    Ciao.

  • Can I use HDMI port on my Macbook Pro for digital audio INPUT?

    Trying to find a way to get digital audio input to my new MBP with retina.  HDMI supports audio and video, so can I use that port as an input?

    It is not recommenced to use TimeMachine in a partition, either on the boot drive or externals because of problems in the past with that arrangement.
    You also need hardware protection in addition to software protection.
    If you want to do what I do, which is have a second 50% partition bootable clone of the first.
    1: Use BootCamp software to create yourself a 50% sized partition, then exit the program. (you also can do it in Disk Utility, but it's tricky)
    2: Head to Disk Utility and select the BOOTCAMP partition and change it's name and format to OS X Extended Journaled.
    (To map off bad sectors in advance, use Disk Utility Erase with the next to last on the right selection, improves reliability and makes for faster reads)
    3: Download Carbon Copy Cloner, now select your Macintosh HD partition and clone it to the second partition.
    4: Whenever you want to boot from the second partition, just hold the option key down on the keyboard to select it to boot from.
    You can access the folders on the second boot partition as well, to grab deleted files you accidentally erased (which is a rare thing for most to occur) however you should leave it alone and as a clone.
    You can update the clone when you need to, or schedule it to run automatically.
    You should also do this occasionally with a external drive, as the internal drive can die and take both partitions with it.
    I currently do this with my laptop, that way if I'm mobile and have a serious issue, I can boot from the cloned partition in seconds without carrying a drive around. If I need large space for something I wasn't aware of, I can erase the clone partition and later clone it again.
    Software does all the work, just pick a time your not using the machine and let it work. Painless really.
    Most commonly used backup methods

  • Cannot use VGA output on my Satellite A100

    I have Satellite A100 laptop and when I use the VGA output my monitor informs their is NO signal. I have checked my monitor and it does work.
    What I would like to know since their is no signal output from my VGA does this also mean that the *S-Video* will not have any signal either?
    I dont have a S-Video >> VGA adapter as present trying to save the cost of buying one if it does not work...

    I really don't know what are you doing wrong?
    Is your notebook connected with VGA cable or with some adapter to the VGA port on your notebook?
    When monitor is connected please use FN+F5 key combination to switch between LCD display and connected monitor.
    Does this work?

  • Cannot use WLAN connection with my Satellite Pro A100

    Toshiba Satellite Pro A100-830
    Netgear DG834G
    Can not use wireless connection. While using "Config Free" to find wireless device the popup 'this connection is controlled by other software'. I do not know what it means and which software controls the connection. I have other laptop which is duly connected by wireless connection. I am ok with wired connection.
    I do not know much about technicalities and thus seek help if any reader can.
    Thanks
    Kris

    >Can not use wireless connection. While using "Config Free" to find wireless device the popup 'this connection is controlled by other software'
    You should not use the ConfigFree for the Wlan configuration but either the own Vista configuration options or the WLan configuration tool like Intel ProSet Utility or Atheros Clint Utility. It depends on the WLan card what utility can be used.
    Intel card -> Intel ProSet Utility; Atheros WLan card -> Atheros Clint Utility
    I assume the message +this connection is controlled by other software+ appears because one of the options mentioned above controls the WLan.

  • Cannot use Wi-Fi on my Satellite Pro L500D

    Hi,
    I have Toshiba Satellite Pro L500D-137 part NO PSLT7E-001004GR AND I CAN'T USE WIFI.
    W7 Home Premium. Can you help me?
    http://forums.toshiba.com/tshb/attachments/tshb/brd_network/14880/1/Device%20Manager.jpg
    http://forums.toshiba.com/tshb/attachments/tshb/brd_network/14880/2/Laptop%20back.jpg
    Better ,or toshiba cant show pictures ?

    Hi
    According notebook specification your notebk has Realtek 802.11bgn RTL8191SE WLAN card inside and it is confusing that this WLAN card is not listed under network adapters in device manager.
    I presume you have german machine. Have you installed own OS on English using Microsoft installation disc.
    Have you installed WLAN card driver?
    Please do it. Latest driver you can find on Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/

  • Cannot use Intel widi with my Satellite L50-A-11T

    Hi,
    I have a Satellite L50-A-11T and i've tried to use Intel widi with Windows 8.1 and doesn't work, it says that the system is not compatible.
    With Windows 8 it was ok and worked fine, but in the instruccions for upgrading it said to remove Intel widi.
    Why is that?
    Thanks in advance.

    You misunderstood this info.
    Intel WiDi isnt supported in Win 8.1 on Toshiba notebooks BUT instead of Intel WiDi you can use Miracast.
    But Intel WiDi is not Miracast.
    Intel WiDi was developed by Intel.
    Miracast is an standard supported by developed by WiFi Allianz and Intel is a part of this Allianz
    Windows 8.1 as well as Android 4.2 support the Miracast standard.
    But this does not mean that you can use it always you need the compatible hardware parts.
    In case your TV would not support Miracast standard, you will not be able to use it

  • Can I use HDMI port to take signal in and pass thr...

    Hi, I've got the black Vision Box (ie, second generation), an old DVD (that I wish to replace) and an old (but perfectly good) CRT TV (that I wish to keep - for a while longer)
    I have decided not to buy any more DVD disks as that is old technology and plan on using my Sony beat points to get their latest Blue Ray (BR) player. My TV obviously does not have any HDMI input and the BR player does not have any SCART output.
    So, I am looking for a HDMI --> SCAT converter (probably impossible) or some other way to get the BR signal to the TV.
    I was wondering if it was possible to take the HDMI cable from the BR Player into the Vision box and then pass that signal through to the TV just as was possibly from Video Player to vision to TV (but all on SCART).
    Any suggestions would be great - though buy a new TV not an option
    Thanks in advance,
    David

    Well done on the 1000th post...
    I probably would not be looking at using the "points" right now, but the scheme changed and they run out some time next year, so I have to use them or loose them, so I might as well start looking at getting something - even if it's not a BR player in the end.
    I appreciate I haven't got the benefit of HD TV - that will come. Basically I have 2 issues, 1 the TV is perfectly OK and I can't justify ditching a working TV, and 2, I can't afford to get a new TV right now - I'm saving (yep no debt for me).
    You say, "So these HDMI to SCART leads you can buy have a very limited use". Limited may be ok if they work - I have looked but can't find any to consider buying. Found SCART to HDMI, but it sounds like they only worked one way. Any idea where to buy from?
    Thanks for responses so far.

  • Cannot use created recovery discs for Satellite A350-134

    Emm I really hope you can help me.
    The Notebook said that you have to create the Recovery Disk by yourself and thats what I did ( on 2 Cds)
    So i wanted to reinstall my Notebook and put in the first cd and booted from CD. So i came into the Menu.
    Then after a while it asked me to put in the second CD and I did it. Then it said there was a error copying the last 2 files needed.
    So now i cant create the Recovery Disk again because I already started the reinstalling. now i have a few questions
    What can i do generally ? Because I really dont want to buy for 35 euros a new Recovery Disk :S
    I thank everyone who helps me :D

    If you want to have factory settings you must install recovery image from recovery disc.
    If your discs dont work you must use original Toshiba recovery disc.
    My opinion is that you should install Win7 32bit on this machine. I do it on friends A350 and it runs perfectly.

  • Cannot use touchpad on my new Satellite L500

    brand new L500, downloaded a few programmes, all of a sudden, cant use the touchpad at all
    i can use external mouse no prob
    Thanks

    Hi,
    As said as***, check if it is enabled (FN+F9). if doesn't solve your issue, maybe you need to reinstall (touchpad drivers)

  • Cannot use Standby option on my Satellite Pro P200

    Hi
    I have installed XP SP2 on my P200, but it can not go into standby, it says something about RAM parity check or something?
    What can be wrong?
    Standby in Vista works fine.
    *Hardware malfunction*
    *Call your hardware vendor for support*
    *nmi: parity check / memory parity error*
    *The system has halted*

    An NMI error can be caused by a number of things.
    Bad memory, did you install any memory modules recently?
    Faulty hardware
    Bad driver
    Read this Microsoft KB for a solution:
    http://support.microsoft.com/kb/315223
    If the RAM passes, I would run recovery to rule out a software problem. If it still happens after that, take it to a repair center.

  • Satellite P855-108 - PC health Monitor fails to update - Windows 8.1 update

    Hello,
    today updated to win 8.1 from a one year old windows 8, everything went fine
    Then I followed Toshiba recommendations for updating the tools but despite doing exactly as explained the flash cards(and the functions buttons) are not functioning, they worked perfectly in win 8!
    _The only utility that fails to update is PC health monitor,_ the version installed is 1.9.04.6402 and the one from support site for win 8.1 is 1.9.09.6400, when trying to install it fails with error message "not support"
    When trying to open the installed health monitor there is also an error message "can`t get the bios type".
    This is strange and every other utility recognizes the latest bios version 6.70 an the laptop`s details an serial
    I tried all I could think about, installed flash card support tool from win 8, enabling and disabling in the bios, even installed VAP for win 8 but no change
    Any help would be highly appreciated
    Latest system driver and other tools are installed
    Thanks in advance

    Sorry for taking space on the forum,
    _In case anyone is facing the same problem I managed to find a solution by my self,_
    *it was caused by the old version of PC health monitor,*
    uninstalled, updated to latest version
    Now Function key utility and everything works as supposed, _the latest Health monitor also works fine_

  • Connect TV(HDMI) using laptop HDMI port

    Hello,I have HP 15 Notebook PC.And I need to connect my laptop to TV using HDMI port.I connect both using HDMI cable,But nothing shows on TV.How do I do it???? 

    When on the first picture panel, click on the "Detect" button.  It should then see the TV as a monitor, assuming the TV is on and the HDMI input that the laptop is connect to is selected.Then that same picture panel showed show the TV as "2"

Maybe you are looking for