Cannot use HP scan with 7520 on OSX Mavericks
I have added a new computer to the household---a 2014 macbook air. I currently use my 7520 to print and scan without any problems on our other home computer (2011 macbook pro). I just installed the latest drivers and software (for Mavericks 10.9) and software, and I can print just fine using any print dialog. I can also scan documents if I use Apple's built-in scanning software from the system preferences menu.
BUT: I cannot use HP scan at all! Every time I attempt to scan a document, it tells me a dialog that says:
"HP Photosmart 7520 series-AirPrint is currently unavailable. Please check if it is turned on and connected, or try again later."
I don't get it---I can connect and scan just fine using NON-HP scan software, and this is the latest software/driver kit. I really like HP scan for its wireless and editing abilities, and am very frustrated! How can I fix this?
Thanks!
SunShyne
I think that did it! I missed a step in your previous explanation. Will see if it holds. I'll report back here if it loses it again, bot all good for now.
Thanks
Similar Messages
-
Anyone using FCP 7 with the new OSX Mavericks?
Has anyone updated to the new OSX Mavericks and is using FCP 7 without problems? Any plugin malfunctioning?
Nevermind I fixed it. Atleast I think I did, I just set my audio to 24-bit and 9600khz or whatever its called and it sounds clear now. At least I hope that fixed the problem.
-
Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions. I downloaded the most recent driver! Any help would be appreciated.
HP says that the drivers for your all in one print/scanner are downloadable from apple. For the scanner to use preview. image capture or the scan icon from the print driver queue. I don't know how old your HP is, but I know that the newer Os from apple don't support a lot of older printers. You might be able find a third party driver that could work.
-
Help! I cannot see the Airplay symbol on any of my devices anymore! I have tried following all guides and troubleshooting, but to no avail. Just cannot use the AppleTV with any of my devices.
Thanks for the link. It didn't work at first on any of the devices but then I decided to enter a manual DNS instead of an automatic configuration. Then followed the steps again from your link and it worked.
It is not stable though as I need to reset the device for it to see the airplay. But when it is connected it stays connected for 30 minutes approx.
Any other suggestions to keep it stable would be fantastic but at least in the meantime I have a workaround.
Thanks -
I cannot use downloaded ringtons with my Contacts.Ringtones downloaded by programme Ringtones
I cannot use downloaded ringtons with my Contacts.Ringtones downloaded by programme Ringtones
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
"You cannot use this application with this version of OS X"
Hi,
I'm getting this message when I try to open .AVI files that I uploaded from my digital camera, but I'm posting it here instead of in the Quicktime section because I believe that the cause of the problem is more general. When researching this problem, I looked at the info panel for these .AVI files, and the app listed to open them was "Quicktime Player (default) (7.1.3)". But the actual version of Quicktime that I have installed is version 7.4. If I set the file's "Open With" app to be "Quicktime 7.4", it opens fine, but the "Open With" app reverts back to "Quicktime Player (default) (7.1.3)", making the problem come back. I've also noticed that if I right-click on other apps (a PDF file, for example), and choose "Open With" from the popup menu, that I see other versions of apps that no longer exist on my machine (Safari 2.0.4, for example). I think that files associated with these older app versions may be the cause of many of the "You cannot use this application with this version of OS X" issues that have been reported here. My question is where is this list of "installed" products maintained in OS X, and is there a way that I can edit it to remove those product versions that no longer exist on my system. In my particular instance, I'd like to remove "Quicktime 7.1.3" which should allow me to set the associated app for my .AVI files to be Quicktime 7.4 with no possibility of the association reverting to an earlier version that's not only incompatible with Leopard, but also not installed on my system.
Thanks,
KenWhen you associate a file with an application, are you then clicking the "Change All" button? You can rebuild the LaunchServices database. Evidently the location of the command and the database have changed slightly in Leopard from what they were in Tiger. See this thread for the updated instructions:
http://discussions.apple.com/thread.jspa?messageID=5730491
Also, make sure you don't have the old applications archived somewhere. I've been astonished in the past at just how enterprising the system can be in finding some program squirreled away in an obscure backup folder and listing it as an option to open something.
Francine
Francine
Schwieder -
Cannot use push notification with Whatsapp
Cannot use push notification with Whatsapp and pop up "Connect iTune for Push Notification" when open Whatsapp
http://www.whatsapp.com/faq/en/iphone/20950116
Jackson -
I installed the latest HP LaserJet SW OSX Maverick v.12.34.45, which supported OSX 10.10 in theory. I started the HP Utility scan but the printer did not show. I tried to installed it manually using the IP address from the printer, nothing.
Is there a solution already available?@YDNA1958
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP -
Cannot print or scan with USB printer over wifi from airport express / time capsule wifi
Hi everybody,
I have recently set up time capsule connected to the router from the telephone company but created a new wifi network for the time machine to better work. Now I have bought an airport express to be able to use my USB printer over the WIFI network. I have to laptops, the printing works fine over the mac book air but not over the macbook pro. On top of that I cannot scan with either of the devices.
I have scanned most of the information out there but this issue seems not to be addressed properly anywhere. Advices given do always repeat itself but no solution worked for me.
Now I have plugged the usb from the printer directly back into mac book pro and the problem seems to persist here too. The message I receive everywhere is this one:
The software for the printer was installed incorrectly.
Would you like it to be repaired?
When I hit the Repair button a notice says 'repairing permissions' but nothing really happens. In the end nothing has been printed.
Resetting the printing systems has not really changed anything either. The problems persist.
This is the screen I get when the printer is directly plugged in through USB:
Result: printer recognised and installed, I cannot print (The software for the printer was installed incorrectly), but I can scan (probably because of the hint ('multifunction')
When I try to install the printer through the network connection (wifi network over time capsule and airport express) I get this image:
Result: printer recognised over bonjour but without multifunction (in other words without scanning), I cannot scan nor print (The software for the printer was installed incorrectly)
As I already mentioned any solution I found online would not work. Now the qustions are:
1) why can't I print? The drivers seem to be there but somehow broken, and I don't know how to repair it
2) why can't I scan over wifi? It sould possible that any function that can be performed over cable should also be able to performable over air, right?
I would very much appreciate any kind of help.
Thank you in advance,
CrisWhat's up doc?
HP has not provided "network" drivers to allow advanced features when the the All-in-One is connected to the USB port on the Time Capsule.
Therefore, only the printing function is supported when the All-in-One is connected to the Time Capsule's USB port.
If you need advanced features like fax, copy, scan, maintenance etc., you will need to connect over the WiFI network, or connect the All-in-One directly to your computer. -
Cannot use isight camera with Windows 7 x32 on Macbook mid-2009
Very very weird,
it worked until bootcamp was upgraded mid next year.
I have been looking for a solution siunce then.
Wife is using the notebook and she is mad every time she is answering call from Skype or MSN Messenger she needs to reboot into Lion.
She uses Windows 7 x32 on bootcamp most of the time yet she cannot use the camera.
The camera shows grey and freezes wiuth busy mouse cursor.
booting intro Lion works so it is something with the drivers.
Can anyone help?
I have looking for months already and I did not see solutions...
AndreaIssue Fixed.
BootCamp 3.2 - 3.3 breaks the functionality with Windows 7 at the latest patch level.
The fix has been:
upgrading OSX to Lion
Patch to latest release
Go To Boot Camp Assistant
Download Windows Support Files to Jump Drive (second option I believe it is)
Reboot into Windows 7
Run Setup - BootCamp 4.0 will install
Reboot
Launch Skype or MSN Messenger - ISight will magically work again! -
I tried to update my iphone,,ran downstairs ot garden since it took 30 minutes. I cam e back with an itunes logo and plug on the front cannot use my phone or call it....apple's store in tampa is close...I will probably get in a car accident on my way to the store 1 hour and 30 minutes away after I get pulled over for speeding after I get a flat tire(;
Hello hstacy
Check out the articles below to troubleshoot issues with resolving issue with issues updating your iPhone. If you are having issues with it not being seen, pick one of the two articles that goes with the type of computer you have.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Regards,
-Norm G. -
Cannot Use Rollover Functions With Templates
I'm surprised that you do not hear anything about this, but
if you create a template in Dreamweaver 8, your buttons will work
but you cannot use rollover effects. That stinks! Does anyone know
of a hack, plug in, etc. to get around this bug? It seems like i
always find the bugs for some reason.
Thanks for any help.They have always worked in every version from DW2 through the
current CS3,
which is what I am using.
Show me a child page where they are not working, please, by
posting a link
to one.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"dsmflash" <[email protected]> wrote in
message
news:fakq86$6a$[email protected]..
> Well, something must be up with my version of Dream 8
because mine do not
> work
> and I have created my temps to the letter. So what
version of Dream are
> you
> using and how do you get rollovers to work? How can a
rollover effect
> work
> when the template is locked?
> -
Cannot use Intel widi with my Satellite L50-A-11T
Hi,
I have a Satellite L50-A-11T and i've tried to use Intel widi with Windows 8.1 and doesn't work, it says that the system is not compatible.
With Windows 8 it was ok and worked fine, but in the instruccions for upgrading it said to remove Intel widi.
Why is that?
Thanks in advance.You misunderstood this info.
Intel WiDi isnt supported in Win 8.1 on Toshiba notebooks BUT instead of Intel WiDi you can use Miracast.
But Intel WiDi is not Miracast.
Intel WiDi was developed by Intel.
Miracast is an standard supported by developed by WiFi Allianz and Intel is a part of this Allianz
Windows 8.1 as well as Android 4.2 support the Miracast standard.
But this does not mean that you can use it always you need the compatible hardware parts.
In case your TV would not support Miracast standard, you will not be able to use it -
Cannot use edit mode with zebra layout in alv
Hi,
I am using 'REUSE_ALV_GRID_DISPLAY' for the ALV genration,
I found that I cannot use
it_layout-edit_mode = 'X'.
it_layout-zebra = 'X'.
simultaneously..
Only zebra layout come up and not the edit mode...
Is there a wrk around to solve this
Thank you,
Arjun.Gtry removing
it_layout-edit_mode = 'X'.
from ur code..
and add
is_fieldcat-edit = 'X' " for all columns... -
Problems scanning with HP printer and Mavericks
I recently installed the GM version of Mavericks and tried to scan some stuff and it came up with this error "An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only." I tried repairing permissions and reinstalling the scanner software, but to no avail.....I'm not certain if it is because of Mavericks or something unrelated to that...any suggestions?
Hi burdell1,
As I am sure you know, OS X Mavericks has not yet been released by Apple. Gold Master is only a version of the Mavericks and was released to developers but not yet to the public. The HP software you are using is not compatible with the OS X 10.9, it was designed for the 10.8. This is likely why you are experiencing the issues you are having.
Maybe try scanning with he system preferences rather then the HP Scan software. How to Scan without HP Software.
Method one: Scan from Apple Preview
Method two: Scan from Apple Image Capture
Method three: Scan from Print & Scan
With any luck on of the above options will enable you to start scanning again. Hope the information I have provided is helpful!
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP
Maybe you are looking for
-
i tried to reinstall the smc from the list apple provides, http://support.apple.com/kb/HT1237 but the install says i dont need too wont even let me reinstall, yet the console has many smc errors, i know my hardware is fine ive tried removin any softw
-
The top button on my phone recently stopped working. Well sometimes. Majority of the time if I click it hard enough on the left side of the button it will lock the screen... Otherwise it doesnt work at all anymore. Also the camera appears to be placi
-
How to pass variables between loaders
Hi, I am trying to load an image, with descriptive text and a back button on the click of a thumbnail of the image. I am using a MovieClipLoader instance to do this. Here are my problems: 1. I tried loading the image, with the text(which is within an
-
How to copy net price of the Contract to Valuation price.
Dear All, I have a requirement to change the valuation price when raising purchase requisitions (ME51n). when selecting source of supply (Contracts), i want to copy the Net price of the selected contract to the Valuation price of the Purchase Requisi
-
Using Profit Center Accounting for balance sheet reporting on various plant
Hi Gurus, Can anyone please tell me the steps I need to take to use PCA for balance sheet reporting on various plants under one company code. If there is a better way then please let me know. Thanks