Cannot use internal microphone after upgrading Win 10 Home 64bit

After upgrading from Windows 7 Home Premium 64 bit to Windows 10 Home 64 bit on my laptop HP 1000 Notebook PC, Windows cannot hear the internal microphone, I think the mic signal is too small. I cannot use Cortana, Skype chat or Hangout. Windows says that the recording driver is still available and connected but there's no recording signal. I already uninstall and reinstall driver from Realtek and HP website  but no effect. Also I used Windows Troubleshooting and HP Support Assistant but it is still not normal.Some one can help me to solve this problem. I really want to use all the function of Cortana.

Thank you very much for your attention! I checked the BIOS, my Production number: C9M71PA#UUF, HP 1000 Notebook. Also, when I tested with 1 external microphone (run normally with other computer), my latop can recognized the sound and I can use the Cortana, but I have to maximize the the Microphone Boost.I guess that windows driver lower the voice sound too much; because when I followed the instruction get started calibrating the microphone in the thread dv7t-7200: Microphone not compatible with Windows 10, it had improvement but not too much. Please help me to deal with this problem. Thank you again.

Similar Messages

  • Cannot use WLAN card after upgrade to WXP SP3 on Satellite Pro 4600

    Hello,
    This is my configuration
    Computer: Satellite Pro 4600 model ps460e 02hyt fr
    Operating system: Windows XP SP3
    Wireless lan mini pci card: pa3070u - 1mpc mpci3a-20
    My problem:
    The operating system has been upgraded from win 98se to windows XP SP3.
    The wireless lan mini pci card do not works I attempt to download the good drivers but I have a big problem all the downloads drivers does not work. I dont know the name of these physical board.
    Where can I find a solution for update these driver? Is it possible that the wireless lan mini pci card does not work with windows XP SP3?
    Please I wait for your help
    Thanks
    [email protected]

    I can imagine it will works with SP2 well. Can you test it please and post the result?

  • I am unable to update my album art since I commenced using match (and after upgrading to Yosemite).  How can I 'unembed' old cover art and replace?

    I am unable to update my album art on my iMac since I started using Match (and after upgrading to Yosemite 10.10.3).  A message advises that it's not possible to removed old artwork if it's embedded.  How can I 'unembed' old cover art and replace?

    Normally artwork recovered with iTunes is stored as a separate artwork file and iTunes refers to that file to display artwork when you click on a track.  However, if you then copy the file to another player the artwork file is left behind and the track will not display the artwork on the other player.  To get around this it is possible to embed the artwork in the music file itself so it always travels with the file.  Artwork can be embedded by you or files from third party sources may arrive with embedded artwork.  iTunes apparently now won't replace artwork for such files.  You can accomplish this by completely deleting artwork for a file or set of files in Get Info, then getting iTunes to fetch artwork which will then be set as a reference file rather than being embedded.
    I use an old iTunes so unless you are using an ancient iTunes it won't help for me to give you great details.  To erase artwork I simply get info on a series of files and check the box next to the artwork box without adding any artwork and close.  To do it for  single file I Get Info, go to the artwork display tab and click delete.  Here's a Windows reference for a newer iTunes (but the "old Get Info" reference is for early iTunes 12 and no longer works with newer):I cannot delete embedded album artwork in iTunes 12

  • How itunes cannot sychrnoise with iphone after upgrading latest IOS

    why itunes cannot sychrnonise with iphone after upgrading the latest IOS?

    Sounds like your iPhone was previously hacked/jailbroken. If true, try using google.

  • After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

    After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

  • I cannot view my videos after upgrading to OSX

    I cannot view my videos after upgrading to OSX. Each video I try to open the message on the black background is Blocked Plug-In. In system preferences I have the latest Java but Flash Player does not upgrade to Flash 12 after numerous attempts.

    HI MortenEJ,
    Thanks for your responce.but already done doing "Restore factory settings" .. and when Im doing "back up from" ..
    I still encounter the same problem. I have important messages in my inbox I want to keep. 
    I even try to upgrade to the newest version. IOS 5.0.1. but still the same..My main problem is my contacts. I dont have "+" add contact button and inside each contact.. I dont have the "edit" button..

  • I cannot edit my contacts after upgrading to IOS5 .

    I cannot edit my contacts after upgrading to IOS5 . I can restore to factory settings but I want to keep my messages as they were.. what can I do? please someone help.. thanks in advance.

    HI MortenEJ,
    Thanks for your responce.but already done doing "Restore factory settings" .. and when Im doing "back up from" ..
    I still encounter the same problem. I have important messages in my inbox I want to keep. 
    I even try to upgrade to the newest version. IOS 5.0.1. but still the same..My main problem is my contacts. I dont have "+" add contact button and inside each contact.. I dont have the "edit" button..

  • Cannot use PhotoShop CS6 after trial expired, even after purchasing Creative Cloud Student Edition

    Hi.
    I had PhotoShop CS6 trial, which expired.
    I have purchased Creative Cloud student edition, I receive a message that my PhotoShop trial has expired.
    I am prompted to purchase the product to extend it, or type in the product's serial number
    (I never received a serial number.)
    I paid for Creative Cloud and have an order number, I should not be having this issue. 
    I have uninstalled and reinstalled PhotoShop CS6 multiple times, I also use DreamWeaver and am fearful that I will encounter the same issue. How can I use the Photoshop CS6 after I have paid for it?
    Curonda in Milwaukee, WI.

    Hi.
    The trial expired 2 weeks ago - Monday.
    I purchased the Cloud Yesterday, also 2 weeks ago Monday 10/15/2012.
    I purchased it twice thinking 1 purchase did not complete.
    I still will need to request a refund for 1, I've been too busy between, work, school, and kid. I'm at work now.
    Miss Curonda
    ...Remember, happiness is not a mood its a decision.
    Date: Thu, 25 Oct 2012 05:59:51 -0600
    From: [email protected]
    To: [email protected]
    Subject: Cannot use PhotoShop CS6 after trial expired, even after purchasing Creative Cloud Student Edition
    Re: Cannot use PhotoShop CS6 after trial expired, even after purchasing Creative Cloud Student Edition created by Nikhil Bisne in Trial Download & Install FAQ - View the full discussion
    Curonda,
    Can you let us know the date when your trial expired and when you bought the Creative Cloud Subscription?
    Thanks
    Nikhil
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4799512#4799512
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4799512#4799512
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4799512#4799512. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Trial Download & Install FAQ by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Cannot use photoshop cs6 after trial expired, even after purchasing creative cloud

    cannot use photoshop cs6 after trial expired, even after purchasing creative cloud

    Hi Rshmaine,
    please follow the steps provided on the link mentioned below and let us know if that resolved the issue or not .
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Kartikay Sharma

  • Cannot use face time after upgrating to ios 6 .password is not recognisible.pls help urgently

    I cannot use face time after updating to IOS 6'password  is not recognisible here nor to imessage pls help urgently

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • I am using macbook air, after upgrading to os x mavericks, i am not able to mount my 1 tb seagate go flex hard drive , any solutions , also iPhoto is not upgrading , every time i try to upgrade, it shows an error.....

    i am using macbook air, after upgrading to os x mavericks, i am not able to mount my seagate 1 TB go flex hard drive, also iphoto upgrades crashes mid way ... what to do ?

    What exactly crashes?  iPhoto upgrades to a library or the application? 
    What format is the external HD?
    OT

  • Cannot open aperture v3 after upgrading to  OS 10.6.8.  Bought the upgrade online so cannot reload the software.  Can you help?

    Cannot open aperture v3 after upgrading to  OS 10.6.8.  Bought the upgrade online so cannot reload the software.  Can you help?

    How did you buy it online? Did you buy a registration number from the Apple Store?
    Then you can download the Trial version from this link:
        Aperture 3.1 Trial 
    and run Software Update immediately after installing.
    Go to the Applications folder and delete Aperture.
    Download the Aperture 3.1 Trial.
    Open the Aperture Trial disc image.
    Double-click the "Aperture Trial.mpkg" file.
    Follow the onscreen instructions to install Aperture.
    After the installation completes, choose Software Update from the Apple () menu.
    Cannot open aperture v3 after upgrading to  OS 10.6.8. 
    But what exactly is the error you get, when you try to launch Aperture? Maybe you need to do more than updating.
    Regards
    Léonie

  • W8-Display too bright on lowest level after upgrade to windows 8 (64bit)

    Display is too bright on lowest level after upgrade to windows 8 (64bit)
    Hello,
    does anyone know how to get the old drivers for w7 to work?
    or is there another solution?
    My installed driver:
    Mobile Intel series 4 express chipset family MS corp. -WDDM 1.1
    8.15.10.2702
    even on cloudy day it hurts my eyes... (my temp solution is dimScreen app- black filter on top of all windows)
    Fn+Home/End
    funny thing is that the scale which shows on top left corner has like 11 steps but only top 8 works
    also the old bottom page brightness scale (15 steps) disappeared.
    background info:
    X301-2776 so IMO it is GM45
    i had w7pro i i have over installed it with w8pro both 64
    thanks ahead for any ideas

    success
    this makes the trick - old drivers for win vista 64bit
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7xd649ww.exe
    and for 32-bit
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7xd549ww.exe

  • Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit)

    I can't reinstall Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit).  When I went to Linksys site for solution for new drivers, it asked me for Hardware Version Number.  This model doesn't show one.  Any thoughts?
    Thanks!

    Sabertooth is right. If you are able to go online from your Router then you don't need to install LELA software on your Computer.

  • PSE 10 crashed using Photomerge after Upgrade WIN to 8.1

    Used PSE10 on WIN 8 64Bit CPU well.
    After upgrade WIN8.0 to 8.1 i allways get an Error (PSE 10 did not function properly. Program will be closed and you will be informed if there is a solution available   = in German: Adobe Photoshop Elements 10 funktioniert nicht mehr.  Das Programm wird geschlossen und sie werden benachrichtigt wenn eine Lösung verfügbar ist). Re-Installing PSE10 did not solve the Problem.

    I found the solution:
    It was a parsing bug in Oracle client, with the most recent version 9.2.0.7 it works.

Maybe you are looking for