Cannot use Ipod with my USB Network Adapter

it seems my PC can only recognize my ipod or my USB Network Adapter without the other. if i only have one plugged in it works fine. but if i plug in the 2nd 9order doesn't matter0 my PC can't recognize the 2nd one. plz help. i need to be able to use the internet and my ipod at the same time. and no it has never done this before until recently.
if u can or wish to IM me through MSN or AIM so we can discuses this
my msn and aim id is mistyshadow6969
ty everybody

had same problem. it seems to be a power issue with the usb ports when pc is plugged into a surge protector. try plugging pc directly into outlet then plug ipod into usb port. do a normal restart first. im at [email protected] let me know if it worked; it did for me. later

Similar Messages

[SOLVED] Using a NETGEAR WN111v2 USB network adapter with Arch Linux

Hello!
I just recently bought the adapter mentioned in the subject, and hoped to get it working with my lovely Arch Linux OS. (I had read somewhere online that it should work some way or another; ndiswrapper or a kernel driver). However, I've yet to get it working. I tried the tips I found:
Here:http://ubuntuforums.org/showthread.php? … ht=WN111v2
which links to here: http://ubuntuforums.org/showthread.php?t=885520
Basically, it tells me that I should use ndiswrapper with the arusb_xp drivers provided by NETGEAR. So I place the three files arusb_xp.inf, arusb_xp.sys and arusb_xp.cab in a folder, and run:
sudo ndiswrapper -i arusb_xp.inf
ndiswrapper -l
arusb_xp : driver installed
device (0846:9001) present
sudo ndiswrapper -m
sudo modprobe ndiswrapper
This should install my drivers, add an alias in modprobe.d/ndiswrapper saying "alias wlan0 ndiswrapper" and load ndiswrapper in itself... right?
But after a iwconfig I can still see only eth0 and lo, no wireless interfaces at all. I checked lsmod, but couldn't find any conflicting drivers loaded.
Anybody got an idea why it worked for the people with Ubuntu and not me? Any and all help greatly appreciated!
Cheers
EDIT: For some magical reason, the drivers that came with my adapter did NOT work, while the drivers on the second link, named the same, DID. I have not inspected how they differ, but luckily, they work. Yey!
Last edited by mariusmeyer (2009-05-07 08:52:21)

i have the same computer and the same os, and i want to do the same thing. have you figured out if this works yet?
i was told that the new airport extreme cards wont work in older computers. and that id have to find an older airport card on ebay because they dont make them anymore
Message was edited by: xacharias

I got lightning to usb camera adapter but get fault message on ipad mine "cannot use device" the connected usb device requires too much power

I tried to use lightning to usb camera adapter but every time I plug it into my ipad mine it give cannot use device. the connected usb device requires too much power. how could I use this attachment.

Or use the camera's SD card instead.
 Cheers, Tom

G4 Won't Boot after Tiger install and Belkin USB Network Adapter install.

I'm sure this would apply to my G5 as well.
I installed Tiger on my G4 and it restarted and opened to desktop. Great!
Next, installed software drivers from Belkin USB Network Adapter.
Restarted computer,
Screen has firmware 'like" look asking me to type mac_boot.
I do this and the next screen is all grey with two small purple folders in the corner. I believe one was flashing!
Nothing happens just stays there.
How can I get back to normal boot mode?

tigerswim, welcome to Apple Discussions.
Did you already have Tiger installed or did you have Panther 10.3 installed? Tiger is not a free upgrade; you have to buy it & then update (for free) using the download updates from Apple. Also, you have to use a universal/retail install DVD (or CDs) to install Tiger. You cannot use the install DVD from another model Mac.

Charge iPod with the USB cable

When I connect my iPod to a computer whithout iTunes installed, I get a new drive in windows. But on my iPod I get symbol in the display that says that I should not remove the cable before I disconnect the iPod in windows.
In this case the iPod charge until I disconnect the iPod in windows.
When I use iPod with my computer where iTunes is installed, I can press the Eject iPod button in iTunes and the iPod still get power from the USB cable, and the iPod still charge.
Is there any software so can do the same job as in the iTunes for eject iPod? Beacuse then I can charge the iPod with only the usb cable and still listen to the music.
iPod U2 SE Windows XP Pro
Windows XP Pro

I would try here first.
iPod touch: Hardware troubleshooting
Then to the Apple store.

I cannot use itunes with windows 7. I think the problem has something to do with the fact that a 32 bit xp version was loaded on my machine. I can't uninstall it and the 64 bit version will not install.

I cannot use tunes with windows 7. A 32 bit xp version was loaded from my prior computer. It will not uninstall. The 64 bit version will noit install.

I cannot use tunes with windows 7. A 32 bit xp version was loaded from my prior computer. It will not uninstall. The 64 bit version will noit install.

Can you connect a usb SuperDrive if you use a lightning to usb camera adapter and a usb hub?

I was just wondering if ypu could connect a usb SuperDrive if you use the lightning to usb camera adapter, a usb hub, and then plug the SuperDrive into the hub. Will it work to play disks, or movies, or something?

No, drive consume too much power.
Try using a wireless flash drive.

Apple TV 1st generation cannot use AirTunes with Apple TV 2nd generation or Airport express 2nd generation

Is it normal that Apple TV 1st generation cannot use AirTunes with Apple TV 2nd generation or Airport express 2nd generation? I want to play music synced in my ATV 1st gen. to a nymber of speakers in the house. In the list of speakers I can see Apple TV itself and my two Airport Expresses 1st generation but not my Apple TV 2nd generation or my Airport express 2nd generation. For the ATV 2nd gen. I found a solution: when I enable the Airplay setting of XBMC which is installed on my ATV 2nd generation, then AirTunes in ATV 1st gen. sees the speaker "XBMS (Apple-TV)". Itunes can in my Macbook pro can use Airplay with all my speakers, i.e. ATV 1st gen., ATV 2nd gen., Airport Express 1st gen., Airport Express 2nd gen.

Last time I checked ATV1 could not use Airtunes to send audio to an AppleTV 2 or 3 - highly annoying as you think they would have kept backwards compatibiility for audio, but it seems Airplay is more than a superset of Airtunes.
AC

Cannot use comparisons with column column references in pool and cluste

Hi Experts,
I am facing an issue in a select statement written in 4.6 version and in that the table is a transparent table but when porting it to ECC6.0, it gives the follwing error:
You cannot use comparisons with column column references in pool and cluster tables:'A~MATNR'. refe
The select statement is as below:
SELECT akschl alifnr amatnr aekorg awerks aesokz
         aknumh adatbi a~datab
         bmtart bmatkl
        b~yybcezndr " Commented as not required(IDE)
         cwerks cmmsta c~herkl
            INTO CORRESPONDING FIELDS OF TABLE gt_a017
            FROM a017 AS a
           INNER JOIN mara AS b
            ON bmatnr = amatnr
             INNER JOIN marc AS c
               ON cmatnr = bmatnr
              AND cwerks = awerks
             INNER JOIN lfa1 AS d
             ON dlifnr = alifnr
            WHERE a~kappl = 'M'           AND
                  a~lifnr IN s_lifnr              AND
                  a~matnr IN s_matnr        AND
                  a~ekorg IN s_ekorg        AND
                 a~kschl = v_kschl        AND
                  a~kschl = gv_kschl       .
Kindly help me out in this as A017 is a pooled table in ECC 6.0 . Thanks in advance!!!
Thanks and Best Regards,
Sahil

Hi Sahil,
Refer below code
SELECT KSCHL LIFNR MATNR EKORG WERKS ESOKZ
       KNUMH DATBI DATAB
FROM A017
INTO IT_A017 " internal Table
WHERE KAPPL = 'M' AND
        LIFNR IN S_LIFNR AND
        MATNR IN S_MATNR AND
        EKORG IN S_EKORG AND
*         kschl = v_kschl AND
        KSCHL = GV_KSCHL .
IF IT_A017[] IS NOT INITIAL.
    SELECT MATNR MTART MATKL
          FROM MARA
      INTO TABLE IT_MARA" internal Table
      FOR ALL ENTRIES IN IT_A017
      WHERE MATNR = IT_A017-MATNR.
    SELECT MATNR WERKS MMSTA HERKL
      FROM MARC
      INTO TABLE IT_MARC" internal Table
      FOR ALL ENTRIES IN IT_A017
      WHERE MATNR = IT_A017-MATNR AND
            WERKS = IT_A017-WERKS.
    SELECT LIFNR
      FROM LFA1
      INTO IT_LFA1" internal Table
      FOR ALL ENTRIES IN IT_A017
      WHERE LIFNR = IT_A017-LIFNR.
    ENDIF.
After this use READ statement and fill the data in final internal table..
Please search on SCN for more information about how to use FOR ALL ENTRIES..
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

Cannot sync ipod with itunes after setting up new computer with newest version of itunes

Cannot sync ipod with itunes after setting up on new computer, only songs which tansferred were songs bought on new computer after set up, tried to sync songs and it deleted old songs from ipod. How can I get them back on ipod?? They are showing in music library on itunes still.

If the iPod database gets corrupted, it will add files to "Other" instead of where they really belong.
Restoring the iPod will erase this database and recreate it.
And if I do this, won't I just have the same issue when my iPod is re-updated to the most recent version again?
No, it shouldn't. This is why you Restore the iPod. It erases the corrupt database.

Using USB Network Adapter

I got a blu-ray player for Christmas, and it has a USB port. Can I use Qwest - Wireless-N USB 2.0 Network Adapter to connect to my wireless network set up with an Airport Extreme? Thanks!

Katherine Schmidt wrote:
I got a blu-ray player for Christmas, and it has a USB port. Can I use Qwest - Wireless-N USB 2.0 Network Adapter to connect to my wireless network set up with an Airport Extreme?
If your blu-ray player's USB port supports a Wi-Fi adapter, I'd guess it would work. You should check for that compatibility with the blu-ray vendor.

Can I use the lightning to USB cord with any USB/AC adapter?

Just got a new IPhone 5. Can I use the lightning to USB cord with the AC adapter I had for my IPhone 4 (or any other USB to AC adapter)?

Yes I just check and the one for my MacBook fits my 12 Watt iPad charger.

Using Old First Generation Firewire iPod With Laptop USB

I was hoping that someone could help me out here.
I have an old 1st generation iPod that I bought back in 2003. It holds 10G. It used the Firewire cable, but now I have a Dell Inspiron laptop that has only USB. I tried to plug in this iPod using a USB/Firewire hub, but the device is not recognized by iTunes and furthermore, the iPod does not seem to respond with the "Do Not Disconnect" message. It seems like there's no communication at all. My questions are the following:
1) Can a 1st generation iPod be recognized in iTunes?
2) Can I use a USB/Firewire hub to connect my iPod to the USB?
I really don't want this 1st generation iPod to go to waste! I hope I can still use it with up-to-date technology.
Anyone care to lend me some assistance as to what I can do to make it work with USB?
Thanks a lot for your support.
Dell Inspiron B120 Windows XP 1st Generation iPod

A firewire iPod isn't going to work with USB so you
can drop that idea. However, your notebook has a PC
Card slot, right? If so, you should be able to find a
FireWire PC Card which will let you sync your iPod
with the notebook.
Thank you Chris and dwb. Your feedback is very valuable. Chris, thanks for reassuring me that iTunes will still recognize my OOLLLDDD iPod. Dwb, thanks for referring me to the PCMCIA Firewire card.
Take care.

Bought a used ipod touch 2g its stuck in recovery and I can't get it to restore comes up cannot restore ipod with and unknown error (1)

I bought a used Ipod touch 2gen its stuck in recovery mode. I tried to restore it but it keeps saying the ipod "ipod" cannnot be restored. Unknown error (1) HELP!!! I have updated Itunes and I have restarted the computer and ipod more than once! Anyone have any suggestions???

ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- Also, confirm your security software and settings are allowing communication between your device and update servers.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Used Ipod with no Installation CD

I bought a used Ipod 4th generation 20 gb with a click wheel i guess... Reading the manual apparently in comes with an installation cd origanally but I do not have it and my computer keeps saying ... USB Device not recognized ,,, Blah blah blah ... Help!! I have itunes 8 loaded on my puter and the device works and all sounds great but i cant get it connected so I can add songs what can I do? anyone??

You no longer need an install CD as the iPod software is now contianed in iTunes.
If the computer is not recognizing that your iPod is connected, try the suggestions in these articles.
Windows XP cannot detect an iPod.
USB drivers are not installed properly or are out of date.
iTunes 7 or later doesn't recognize the iPod.
Your Windows PC doesn't recognize iPod
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Windows confuses iPod with network drive

Cannot use Ipod with my USB Network Adapter

Similar Messages

Maybe you are looking for