Cannot use keyboard or remote to enter Netflix info

I have a problem with my TV (model 55L7200U). When I get to the Netflix sign in page, I can't use the keyboard or the remote to enter my information. There is no on-screen keyboard that pops up. I have pressed all of the buttons on the remote and only certain characters get typed.

I had the same problem. Press the enter key (OK?) on the blank input field. A keyboard will come up.

Similar Messages

Cannot use Keyboard and touchpad at the same time? Twist

Hi,
I have the lenovo twist with the i7 processor and a 500GB hard drive (8GB ram). I have noticed that when using the keyboard, you cannot use the touchpad. Although you can use the trackpoint? I know this is a minor issue but can it be updated to fix?

Gamloi7 wrote:
Hi, Kyleosipad
You should be able to do this; it just requires the changing of a setting. If you navigate to Control Panel ► Mouse ► UltraNav ►Settings ► Smart Check Notices ► PalmCheck, you can adjust the PalmCheck sensitivity. PalmCheck is a feature that helps reduce misclicks and touches of the TrackPad. If you uncheck the box that says Prioritize for keyboard and touch input, and click Apply, then you should be able to type and use the TrackPad simultaneously.
Best,
Adam
Yes, that's true - you can disable the "Prioritize for keyboard and touch input," but then you lose Palm Check ENTIRELY even though it's still "set" to its default position. Mine is set one setting from the red setting, so the Palm Check should be active and working as normal. However, when I start typing it goes nuts and my mouse pointer jumps all over the place. The only way I can get it to behave is to again enable "Prioritize for keyboard and touch input."
Can you confirm this?

Cannot use keyboard file(urgent)

i am going to use keyboard.readInt() in my program, but it cannot recognize.
i use Jcreator to run my program.but i am sure that i open the keyboard file under the same directory and run it , it does not contains any error.

Hi,
I think you might need a special keyboard class for that. I am new to programming and did have a problem with that until I installed two special classes in the JDK bin directory. I'll look them up and can mail them to you if required. Maybe they are not what you are looking for at all!!!, just hope I can assist.

Can't adust the volume using keyboard and remote control

Hi
i have macbook Pro like two weeks and a strange thing happened today. I just can not adjust volume up or down using the F3 F4 F5 keys, must go to preferences and adjust manually. The apple remote control does not change the volme neither. When pressing the relevant key the pop up window appears but nothing happens it does not react and a small not available - restricted icon appears in the bottom of pop up. Please help.

Reset PRAM:
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound (bong) for the second time.
6. Release the keys.
Reset your SMC >>
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 

Cannot use wifes email account to enter apple account

I just bought my wife an Ipad Mini. Trying to set it up. I do not know if she has a an account with Apple. When I try to enter her email address with her name I get this: "This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID". When I try to recover password I get, email sent. but it not coming to her address, because I think I screwed up when the email was sent to her address using Mozilla a POP up showed at right lower of screen saying something like accredited sites do not this or something to that effect. I refused without reading full message. Now when Apple sends confirmation of reset, I do not get anything.
Sure could use some help with this problem.
Thanks in advance

Got it Thanks

I cannot use keyboard shortcut to quit Safari after Java update

I don't seem to be able to use the quit function (cmd+q). Only if I turn off Java again. I have updated it a few minutes ago, can't see which version it is. 14?
Does anyone else have this problem?
Klaus

Derek Masterson wrote:
I see it has been two months since your post with no solution. I hope you already did this...
Also, go into System Preferences->Keyboard & Mouse->Keyboard Shortcuts and click the "Restore Defaults" button. See if that helps.
Derek Masterson wrote:
Drag the "com.apple.finder.plist" file to your desktop and then restart.
It's in the YOURNAME/Library/Preferences/ folder. Hopefully that fix will stick.
Note: That won't do what you think it does. See http://discussions.apple.com/message.jspa?messageID=6521022 for a (long) explanation. Force quitting the Finder after blowing away com.apple.finder.plist will do what you want.

Cannot use keyboard shortcut to adjust volume in iTunes

Before version 10.2, I could use the Command Up/Down combo to adjust the volume in iTunes. As of 10.2.1, I can use Command Up, but when I use Command Down, it does not control the slider, it moves my library selection from Music to Movies, Podcasts, etc. as if I was just pressing the Down arrow. How can this be fixed?

I noticed that my volume was really low in itunes even though the keyboard volume was up all the way and the volume slider in itunes was up all the way too.
So, I went into System Preferences and reset the volume from the slider in there.
I shudder to think how that got as low as it was set, because I didn't do it.
Thats when I realized I can no longer control the volume of itunes from my keyboard or the menu icon.
I can however adjust it in itunes.
But were's the fun in that?
None of the remedies I have read about so far have worked.
What next?

Cannot use keyboard with iPad air

HHow to link keyboard to iPad Air?

Hi Infinitepatience,
Welcome to Apple Support Communities.
It sounds like you’re running into an issue pairing your iPad with your bluetooth keyboard. Take a look at the article below, it will walk you through the pairing process and ensure the devices are setup correctly.
iPad: Using Bluetooth headsets and keyboards
I hope this helps.
-Jason

Hi. After I have loaded a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cut, for instance I cannot use Ctrl T to enter free transform mode. Also the toolbar is so small I cannot see the icons without ge

Hi. After loading a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cuts, for instance I cannot use Ctrl + T for free transform, how do I resolve this problem. In addition the tool Icons are so small I have to get close to the screen to see them, is there anyway the Icons can be made bigger without reducing the resolution of the screen.
Thanks
Derek

Are you working on a background layer? If so, Ctrl + T will not work. Press Alt and double-click your background layer to convert to a normal layer (or right-click BG layer and select Layer from Background) and try again.
If you're working in Photoshop CC 2014 you can go to Preferences > Experimental Features and tick "Scale UI 200% for high-density displays" to make your buttons and icons larger.

How do I submit netflix ID using Apple TV remote

How do I submit the Netflix ID using Apple TV remote?

Welcome to the Apple Community.
just use the up, down, left and right buttons to navigate to each letter or number, pressing enter when the selection is correct, when complete navigate to and select the submit button.

You cannot use a remote location as a project cache folder.

I keep getting this message when trying to enable SCORM in my project, how do I publish?
You cannot use a remote location as a project cache folder. Please enter a valid location to continue.
Any ideas are appreciated!!!

Hi there,
Can you check edit > preferences > general settings.
and check the loaction of Project cache and preferences folder.
that location by defalt is: C:\Users\ current user\Documents\Adobe Captivate Cached Projects
Please check this and reply
Thanks.

Captivate 6 - I cannot confirm popup messages using mouse. Must use keyboard shortcuts. Why?

When a confirmation window appears, I cannot use the mouse to click on Ok, Cancel, Yes, No, Save. I must use the keyboard shortcut key, such as Enter, Y, N, S, C. This is extremely frustrating. Is there an update available that corrects this problem?
Thank you,
AT&T Captivator

Hi tjatt,
Is your default text size in windows is Larger -150%? Can you make it smaller - 100% or medium -125% and restart machine? Check whether you can use mouse for confimation windows?
Text size can be found at Windows Start --> Control Panel -->Appearance and Personalization --> Display
Thanks,
Sankaram.

Early 2009 MacBook Air. On startup no keyboard or mouse me to login. Neither is the USB working so I cannot use an external mouse or keyboard either.

Early 2009 MacBook Air. On startup no keyboard or mouse me to login. Neither is the USB working so I cannot use an external mouse or keyboard either. If I keep restarting the machine suddenly sometime I get mouse and keyboard control and I am able to login and work. After sometime though mouse and keyboard Control is lost again and the machine hangs.
Lately another problem has cropped up. Now the machine starts up and seems to work for longer time but I have no 0 key and USB everything else is fine.
What could be the issue

1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

Cannot use Remote Desktop host on Windows 8.1 Pro, termsrv corrupted?

Hello,
Few days ago I upgraded my home desktop machine from Windows 8.1 to Windows 8.1 Professional so I can use the Remote Desktop feature.
I enabled everything needed, checked "Allow computers to connect to this computer" from the Remote Settings, forwarded the port 3389 in my rounter and allowed it in my firewall etc...
But I still can't connect to this computer from outside my home network or inside it. The error I get trying to connect is this:
(For some reason i still can't post images in this forum...) So I posted a link below to my original thread with the images
I'm trying to connect using a laptop running Windows 7 Home Premium.
After searching around I found out that the service responsible for the RDP is called "TermService", I found it on my services but was unable to start it:
(For some reason i still can't post images in this forum...) So I posted a link below to my original thread with the images
Also, notice the description of the service. So I tried to run a System File Checker on the service's DLL (sfc /scanfile=c:\windows\system32\termsrv.dll) and got this log:
2014-10-05 14:20:41, Info CBS TI: --- Initializing Trusted Installer ---
2014-10-05 14:20:41, Info CBS TI: Last boot time: 2014-10-05 13:56:05.492
2014-10-05 14:20:41, Info CBS Starting TrustedInstaller initialization.
2014-10-05 14:20:41, Info CBS Ending TrustedInstaller initialization.
2014-10-05 14:20:41, Info CBS Starting the TrustedInstaller main loop.
2014-10-05 14:20:41, Info CBS TrustedInstaller service starts successfully.
2014-10-05 14:20:41, Info CBS No startup processing required, TrustedInstaller service was not set as autostart
2014-10-05 14:20:41, Info CBS Startup processing thread terminated normally
2014-10-05 14:20:41, Info CBS Starting TiWorker initialization.
2014-10-05 14:20:41, Info CBS Ending TiWorker initialization.
2014-10-05 14:20:41, Info CBS Starting the TiWorker main loop.
2014-10-05 14:20:41, Info CBS TiWorker starts successfully.
2014-10-05 14:20:41, Info CBS TiWorker: Client requests SFP repair object.
2014-10-05 14:20:41, Info CBS Universal Time is: 2014-10-05 11:20:41.783
2014-10-05 14:20:41, Info CBS Loaded Servicing Stack v6.3.9600.17246 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.17246_none_fa4ae8e99b1f603c\cbscore.dll
2014-10-05 14:20:41, Info CSI 00000001@2014/10/5:11:20:41.786 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffee15c60e5 @0x7ffeeace2e53 @0x7ffeeace24ac @0x7ff69a94d2df @0x7ff69a94dc97
@0x7fff02912225)
2014-10-05 14:20:41, Info CBS SQM: Initializing online with Windows opt-in: True
2014-10-05 14:20:41, Info CBS SQM: Cleaning up report files older than 10 days.
2014-10-05 14:20:41, Info CBS SQM: Requesting upload of all unsent reports.
2014-10-05 14:20:41, Info CBS SQM: Queued 0 file(s) for upload with pattern: C:\Windows\servicing\sqm\*_std.sqm, flags: 0x2
2014-10-05 14:20:41, Info CBS SQM: Queued 0 file(s) for upload with pattern: C:\Windows\servicing\sqm\*_all.sqm, flags: 0x6
2014-10-05 14:20:41, Info CBS NonStart: Set pending store consistency check.
2014-10-05 14:20:41, Info CSI 00000002@2014/10/5:11:20:41.801 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffee15c60e5 @0x7ffef3637fc0 @0x7ffef36380f2 @0x7ff69a94ca25 @0x7ff69a94dcae
@0x7fff02912225)
2014-10-05 14:20:41, Info CSI 00000003 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDisposition = @0x559943db20
2014-10-05 14:20:41, Info CSI 00000004 Creating NT transaction (seq 1), objectname [6]"(null)"
2014-10-05 14:20:41, Info CSI 00000005 Created NT transaction (seq 1) result 0x00000000, handle @0x26c
2014-10-05 14:20:41, Info CSI 00000006 Poqexec successfully registered in [ml:26{13},l:24{12}]"SetupExecute"
2014-10-05 14:20:41, Info CSI 00000007@2014/10/5:11:20:41.999 Beginning NT transaction commit...
2014-10-05 14:20:41, Info CSI 00000008@2014/10/5:11:20:41.999 CSI perf trace:
CSIPERF:TXCOMMIT;143
2014-10-05 14:20:42, Info CSI 00000009 CSI Store 367642371808 (0x00000055993166e0) initialized
2014-10-05 14:20:42, Info CSI 0000000a [SR] Verifying 1 components
2014-10-05 14:20:42, Info CSI 0000000b [SR] Beginning Verify and Repair transaction
2014-10-05 14:20:42, Info CSI 0000000c [SR] Verify complete
2014-10-05 14:20:52, Info CBS TiWorker: Client requests SFP repair object.
2014-10-05 14:20:55, Info CBS TiWorker: Client requests SFP repair object.
2014-10-05 14:20:55, Info CSI 0000000d [SR] Verifying 1 components
2014-10-05 14:20:55, Info CSI 0000000e [SR] Beginning Verify and Repair transaction
2014-10-05 14:20:55, Info CSI 0000000f Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000010 [SR] Cannot repair member file [l:22{11}]"termsrv.dll" of Microsoft-Windows-TerminalServices-RemoteConnectionManager, Version = 6.3.9600.17095,
pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-05 14:20:55, Info CSI 00000011 Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000012 [SR] Cannot repair member file [l:22{11}]"termsrv.dll" of Microsoft-Windows-TerminalServices-RemoteConnectionManager, Version = 6.3.9600.17095,
pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-05 14:20:55, Info CSI 00000013 [SR] This component was referenced by [l:154{77}]"Package_3_for_KB2959626~31bf3856ad364e35~amd64~~6.3.2.0.2959626-3_neutral_GDR"
2014-10-05 14:20:55, Info CSI 00000014 Hashes for file member \??\C:\Windows\System32\termsrv.dll do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000015 Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000016 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:22{11}]"termsrv.dll"; source file
in store is also corrupted
2014-10-05 14:20:55, Info CSI 00000017 [SR] Verify complete
2014-10-05 14:20:55, Info CSI 00000018 [SR] Repairing 1 components
2014-10-05 14:20:55, Info CSI 00000019 [SR] Beginning Verify and Repair transaction
2014-10-05 14:20:55, Info CSI 0000001a Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 0000001b [SR] Cannot repair member file [l:22{11}]"termsrv.dll" of Microsoft-Windows-TerminalServices-RemoteConnectionManager, Version = 6.3.9600.17095,
pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-05 14:20:55, Info CSI 0000001c Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 0000001d [SR] Cannot repair member file [l:22{11}]"termsrv.dll" of Microsoft-Windows-TerminalServices-RemoteConnectionManager, Version = 6.3.9600.17095,
pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-05 14:20:55, Info CSI 0000001e [SR] This component was referenced by [l:154{77}]"Package_3_for_KB2959626~31bf3856ad364e35~amd64~~6.3.2.0.2959626-3_neutral_GDR"
2014-10-05 14:20:55, Info CSI 0000001f Hashes for file member \??\C:\Windows\System32\termsrv.dll do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000020 Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000021 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:22{11}]"termsrv.dll"; source file
in store is also corrupted
2014-10-05 14:20:55, Info CSI 00000022 [SR] Repair complete
Since it's the first time I use this tool I'm not familiar with this log file, but what I managed to figure out from it is that termsrv.dll is corrupted and windows cannot repair it for some reason.
My question is:
How can I repair this file? Is this even the problem preventing me from connecting to this computer via Remote Desktop?
Here's a link to my original question which contatining the images.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-system/cannot-use-remote-desktop-host-on-windows-81-pro/e4776239-4d9e-4934-ae2d-b87cc09f7ade

managed to figure out from it is that termsrv.dll is corrupted and windows cannot repair it for some reason.
So, the next step supposedly is
using DISM.
Coincidentally I reached that page last night from
this one, which I thought gave me a better awareness of how much manual repair might be possible. E.g. maybe the WinSxS isn't quite as fragile as we are being led to believe? (It's making me feel sort of like how I used to feel about the
registry when seeing all the caveats about using RegEdit before I got used to that tool.)
Advanced guidelines for diagnosing and fixing servicing corruption
http://technet.microsoft.com/en-us/library/ee619779(v=WS.10).aspx
Something else that I became aware of yesterday serendipitously is SxStrace.exe. I have never seen it used but it sounds useful. E.g. perhaps easier to interpret for supplemental clues than the ProcMon trace that I usually advocate.
Or perhaps use both and see in ProcMon when the SxStrace is writing. E.g. filter with Operation Is WriteFile.
However, what I would do first is find out what the state of your system is regarding that module. E.g. try this Powershell pipeline to list what you have.
PS C:\windows> dir -R -Fil "termsrv.dll" | sort-object FullName | ft Length, FullName -AutoSize
Note that I am giving you the whole command line, including prompt to show where the command should be started from.
C.f. another thread where doing the same diagnostic procedure seems to be finding more a problem with the Windows Update software than with the user's WinSxS cache.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_store/windows-81-store-error-0x80070002-comprehensive/2b0ed3e1-1835-4517-97dd-0a7abb6ef74c?page=3#LastReply
HTH
Robert Aldwinckle

TS1741 I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Cannot use keyboard or remote to enter Netflix info

Similar Messages

Maybe you are looking for