Cannot use MS Paint tool - error with Vista on Satellite L40-139

I have recently reinstalled my windos vista home premium from the back up disk as my laptop refused to start up and the start up recovery file was not found...
Since this i have tried to load the Paint application and got an error: microsoft paint has stopped working,
When i tried to access the event viewer to check for erros i get another error...
Microsoft Management Console has stopped working...
iI dont know what to do i need paint as i have no office programs and having problems accessing a link from a site.
I use regularly and need to send in a screen shot....
Any help would be highly appreciated, i
toshiba satellite l40-139
windows vista home premium SP2 32bit,
1gb ram
31.1gb free o 55.6gb (C:) ,
54gb of 54.6gb free on (E:)

Hi
Just one tip;
If you need an office application then I recommend OpenOffice.
Its open source software similar to MS Office and you can use and download it for free!
Back to your Pain issue;
Paint is a part of the OS Windows. Its not possible to uninstall this.
The paint.exe file is placed in c:\windows\system32\ folder
It seems to be an OS error.... possibly the system is muddled up....
try to clean the OS using the CCleaner...
it cleans the registry and maybe it helps to get rid of this error...
otherwise you will need to reinstall the OS...

Similar Messages

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live were we only have dial-up and the Apple Store said this is what I need.

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.

Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.

I use photoshop CS3. Shortly, when I try to use one of the tools, they react only with the eraser. So I cannot use the other tools. I tried to reset in general preferences all warnings. Then I can use the tools again, but with the next picture I get stuck

I use photoshop CS3. Shortly, when I try to use one of the tools, they react only with the eraser. So I cannot use the other tools. I tried to reset in general preferences all warnings. Then I can use the tools again, but with the next picture I get stuck with the eraser again. What can I do? Joost van Santen

Have you tried resetting all tools?

Hi, i am working on photoshop CC classroom in a book, and i find that i cannot use clone stamp tool, why ?

hi, i am working on photoshop CC classroom in a book, and i find that i cannot use clone stamp tool, why ?

Good day!
What kind of Layer is selected, is the Layer locked, …?
Could you please post a screenshot with the pertinent Panels (Layers, Channels, Options Bar, …) visible?
Regards,
Pfaffenbichler

Satellite L40-139 - cannot use FN function with Windows 7

Hi
I have Satellite L40 - 139 PSL40E laptop, I was using windows Vista. When i was use Vista, i could use "FN" key for sound or others but then i setuped the Windos7 but now i cant use "FN" key for sound, becauze i cant find acessibility driver for Windows 7 that according to my laptop model.
what can i do ? how can i find ?
thnx

Hi Buragh,
I agree with the user above. You have to install Value Added Package and Flash Cards Support Utility. Both tools you can download here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
In forum there are many threads about FN keys. They should be useful so did you read it already? ;)

Help with circumvention of ORA-01472: cannot use connect by on view with ..

Hi,
Any help resolving the following would be v. helpful.
The Aim
Produce a hierarchical report of all users and the privileges they have via the various roles they are granted.
The SQL
select lpad(' ', level*2,' ')|| granted_role from (select grantee, granted_role
from dba_role_privs
union
select role, granted_role
from role_role_privs
union
select role, privilege
from role_sys_privs
union
select 'All users', username
from dba_users)
start with grantee='All users'
connect by prior granted_role = grantee;
The error
ORA-0147: cannot use connect by on view with DISTINCT, GROUP BY, etc.
The database
Oracle 8.1.7.4 (Yes I know ....)
The Solution
[Thanks in advance]

What if you create a table first
create table role_grants as
    select granted_role, grantee
       from (select grantee, granted_role
               from dba_role_privs
             union
             select role, granted_role
               from role_role_privs
             union
             select role, privilege
               from role_sys_privs
             union
             select 'All users', username
              from dba_users)
Then run the hierarchical report
select lpad(' ', level*2,' ')|| granted_role
   from role_grants
   start with grantee='All users'
   connect by prior granted_role = grantee

You cannot use the application "System Preferences" with this version OS X

You cannot use the application “System Preferences” with this version of Mac OS X.
I received this error message when trying to run System Preferences (SP) for the first time after running the 10.5.1 update (from the download, not software update). After the update, I repaired permissions. Did another restart. Same.
I reinstalled 10.5.1 update. Same message. Logged in as another user. No change.
I removed the com.apple.systempreferences.plist from ~/library/preferences. No change, and it did not re-create the .plist file.
Any ideas? No one else seems to be having this problem as far as I can tell.
dkrockville

I have had this problem with many applications after updating to 10.5.1, including
System Preferences, Calculator, Preview. Tried repairing permissions, and other tips from this thread. The strange thing is, the actual Leopard applications seem to have actually vanished? I don't know if this is anything to do with Time Machine; Anyway, My fix was:
Download Pacifist (if you don't already have it), locate the apps that you're having problems with on the Leopard install DVD, and copy them to the Applications Folder (Click on 'Replace Bundle')
Problem Solved for Me!
Hope this Helps!

I cannot use my Acrobat XI downloaded with my one year subscription. It tells me my trial has expired and i need to license it. but I have no serial number.

I cannot use my Acrobat XI downloaded with my one year subscription. It tells me my trial has expired and i need to license it. but I have no serial number.

Rave,
I have the same problem. It says trial is expired, so I select the "sign in now" button. After sign in, it comes up with a place to enter a serial number. The only two other options are "back" and "next".
-Radfuehrer

You Cannot Use This Version of iMovie With This Version of Mac OS X

+*Cannot Use This Version of iMovie With This Version of Mac OS X*+
Yes, I can. iMovie just doesn't want to cooperate. I checked the requirements, it says:
an Intel-based Mac, a Power Mac G5 with dual 2.0 GHz or faster processors, or an iMac G5 at 1.9 GHz or faster.
Well, I meet the requirements, I have an iMac G5 with 2.0 GHz, also with Leopard.
Why can't I use iMovie.
Message was edited by: Qwedgeonline

Oh, NVM I had to download the newest update!

I cannot use the type tool in Photoshop CC it goes black. Why?

I cannot use the type tool in Photoshop CC it goes black. Why?

What goes black?
What OS version are you using?
And have you updated your video card drivers from the GPU maker's website? (bugs in video drivers being the most common cause of display issues)

Cannot use the CS6 blur filters with Mountain Lion

Cannot use the CS6 blur filters with Mountain Lion since I cannot see the circle and other adjustement lines of the UI. I had no problems using these filters with Lion. Could you help.
Thanks

Slateskies wrote:
... I'm doing this because of a new game that requires OS 10.6.8. ...
Why not just Upgrade to 10 6 8 which is Snow Leopard...
First you need to check that your current Mac meets the System Requirements for Snow Leopard...
Snow Leopard Specs:
http://support.apple.com/kb/SP575
If it does... then you need to Purchase and Install Snow Leopard Disc,
Mac OS X 10.6 Snow Leopard
( It should be noted that Apple will send paid MobileMe members the Mac OS X 10.6 DVD for free.)
Would Also Recommend that you do a Bootable Clone Backup of your current Hard Drive Before attempting any Major Upgrade...
By far the easiest way to make a Backup, is to use something like
SuperDuper http://www.shirt-pocket.com/
or CCC http://www.bombich.com/

'You cannot use the application ical.app with this version of Mac OS X'

When I first upgraded to 10.5 ical and calculator both crashed when starting and now after upgrading to 10.5.1 I get the following message - 'You cannot use the application ical.app with this version of Mac OS X'
This is only on my G4 powermac. No problem with Intel MacBook.

Are you, by any chance, one of "those people" that move applications to something other than the default location?
I know I am.
When I upgraded, I saw the same problem - I had moved iCal (among others) outside of "applications" to something like "Applications/Business Apps"
The version in "Business Apps" was the Tiger version, and it wouldn't run. However, the Leopard version (Installed to /Applications) worked fine.
So, I deleted the "Tiger" version, moved the iCal to where I wanted it, and all was well.
In a similar note, I put a number of iLive apps in a different folder -- and OS X software update stopped finding updates for those apps. I had to move them back to /Applications in order to get OS X software update to run them.

Brush Tool Error with Layer Masks

I've identified a layer mask bug in Photoshop 14.2.1 for Mac. When working with non-vector layer masks, the brush tool will not paint a darker value than the white level present in the mask. For instance:
when a layer mask is created from the icon at the bottom of the layers window, the mask itself is white, representing full visibility in the masked layer. If you attempt to use the brush tool with 100% black (to actually mask something in the applicable layer), it does not function. I am able to use the paint bucket tool and the pencil tool to fill black in the mask, but not the brush tool. If the mask is 67% grey, and my brush tool is set to 66% grey, it still will not affect the mask; the white level cannot be decreased, only increased with the brush tool. Bug!

Sure. A mask is just a greyscale image and the blending mode is a property of the brush tool not the mask.
It is actually a very useful feature especially for extracting hair. When painting with black/white in overlay mode you can easily clean up the edges without affecting the pure black/white parts of the mask.

Cannot use duplicate table name error in AMDP

Hi Experts,
I'm developing an application which has the following architecture
SAP UI5->Gateway->ABAP Managed DB procedures(AMDP)->HANA SP(Stored Procedure)
We are having a very peculiar problem where the gateway service works inconsistently for the same input data.
i.e If I execute the same service n number of times, I get the results successfully for say n-3 times but the other 3 times I get a "RFC Error :Error while executing Database procedure"
There is no change in the input data or DB table data during all the executions.
Running the stored procedure stand alone in HANA studio works all the time.
We tried executing the AMDP from SE24 and the same behavior occurred.
When trouble shooting we found that the exception occurs inside the AMDP when the call db procedure statement is executed.
Could you please advise what could be the possible reason for this any tuning parameter/unavailability of db connections?
Or could you please suggest some other troubleshooting mechanism by which we can zero in on the cause?
When I go in the debug mode I can see the exact error as
cannot use duplicate table name: [288] SAPXXX.ZCL_PLAN_MAINTENANCE=>GET_COMP_TYPE#stub#20140905055908: line 15 col 3 (at pos 492): cannot use duplicate table name exception:
where ZCL_PLAN_MAINTENANCE=>GET_COMP_TYPE is the AMDP class and method. SAPXXXis the schema.

I reported this to Adobe customer support on 11/29, and here is their response:
Wednesday, December 5, 2007 12:51:27 PM PST
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop Elements® 6.0.
I understand that images are deleted if you accidentally try to move
them to a folder that already includes a file of the same name.
Thank you for bringing this to our attention. I was able to replicate
this behavior as well. The best method to report errors of this nature
is using the following form on our website:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
I will report this to the product team through my channels. You may want to submit this issue through the web form as it goes directly to the product development team.
I hope this information helps to resolve your issue. If you require
further assistance with this issue, please update your web case with
complete details, including what steps you have applied and any error
messages you are receiving.
You may also call Technical Support at (800) 642-3623. We are available from 6:00 am to 5:00 pm Monday - Friday, Pacific Time.
Kind regards,
Alan C.
Adobe Web Support

Cannot add/ change user account - error with Microsoft-Windows-User Profiles Service

Hello
A few days ago my computer went wierd.
I cannot update windows because I get no results when I use "Windows Search"
My metro UI doesnt work properly. I cannot use it.
Somebody said that it could be that my User Account could be corrupted.
I tried to create I new one, but I could do the first steps, because the computer doesnt respond when I click "Change my account" in controlpanel.
I get errorlogs like this:
Loggnamn: Application
Källa: Microsoft-Windows-User Profiles Service
Datum: 2015-04-29 12:03:16
Händelse-ID: 1542
Aktivitetskategori:Ingen
Nivå: Fel
Nyckelord:
Användare: SYSTEM
Dator: Baddarn
Beskrivning:
Det går inte att läsa in registerfilen för klasser.
INFORMATION - The system cannot find the file specified.
Händelsens XML-data:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-User Profiles Service" Guid="{89B1E9F0-5AFF-44A6-9B44-0A07A7CE5845}" />
<EventID>1542</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-04-29T10:03:16.571099200Z" />
<EventRecordID>91382</EventRecordID>
<Correlation />
<Execution ProcessID="1128" ThreadID="2524" />
<Channel>Application</Channel>
<Computer>Baddarn</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="Error">The system cannot find the file specified.
</Data>
</EventData>
</Event>
What can I do?

Hi Intesabra,
Have you made any modifications to the machine before the issue?
First of all ,I would suggest you to update the machine manually.
Control Panel\All Control Panel Items\Windows Update\Check for updates.
I also suggest you to perform a full scan with the antivirus software to eliminate the virus issue considering this issue is a little wierd. We can do this in safe mode to improve the scanning quality.
Run "services.msc" to check the status of "User Profiles Service" and ensure it is running.
Run "dism /online /cleanup-image /restorehealth" or "sfc /scannow" to check the health of the whole system files.
Considering this issue occurred recently, we can perform a system restore to recover the machine to a previous point.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Cannot use MS Paint tool - error with Vista on Satellite L40-139

Similar Messages

Maybe you are looking for