Cannot use my iphone 3gs after update to iOs 6

hey i m havin an iphone 3gs 32GB which i tried updating to iOs 6 and i was able to update my device but then its saying failed to activate your iphone install sim and all dat i have a sim installed n ive tried both the methods of activation i.e through wifi and by itunes didn help so i tried DFU thing and restartd the whole procedure ...i have 3 iphones 3gs 4 and 4s i was successful in updating 4 and 4s it was fluid but this is not working in my 3gs it says contact apple support

Did anyone figureout how to fix this issue? Please let me know.

Similar Messages

  • HT4623 i cannot activating my iphone 3gs after update

    i cannot activating my iphone 3gs after update?

    That's because it was jailbroken, either now or in the past.  We cannot provide support for jailbroken phones here.

  • How im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

    how im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

    What "auto shutdown problem" are you talking about?

  • I have no service and i cant activate my iphone 3gs after update to ios 5.0.1 can anyone help ??

    i have no service and i cant activate my iphone 3gs after update to ios 5.0.1 can anyone help ??

    touch me wrote:
    it says ICCID: unknown
    Not a good sign. Try forcing the phone into recovery mode & restoring it. If this fails, make an appointment at an Apple store:
    Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • HT4623 i cannot activate my iphone 3gs after upgraded to ios 6.1

    i cannot activate my iphone 3gs after upgraded to ios 6.1, please help!

    read http://support.apple.com/kb/TS3424

  • Why I cannot use SIRI in Japanese after updated to ios 5.1?

    Why I cannot use SIRI in Japanese after updated to ios 5.1?
    I can see the language is there but it doesnt work

    Check your settings to make sure Siri is actually enabled.  Sometimes I find that Siri will disable during the updating process.  Oh, and it should be iOS 6.0 not 6.1.  6.1 doesn't exist...yet.

  • Cannot charge my iphone 6 after updating to ios 8.3

    Dear Sir/Mdm
    After updating my iphone 6 to ios 8.3, and also updating the carrier setting, now, I cannot charge my phone.  I have tried so many different USB cables, all failed.
    Now, I unplug the cable, the phone will show the battery icon with the charging cable.  When I plug the cable in, only the battery icon without the charging cable.
    May I know what happen?  The phone like short circuit.
    What should I do now?
    Thank you

    Greetings thmejlfm,
    After reviewing your post, it sounds like the iPhone is not charging anymore. I would recommend that you read this article, it may be able to help the issue.
    If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Take care,
    Mario

  • Can't activate the iPhone 3GS after updating to iOS 5

    Hi All,
            I updated my iPhone 3GS to iOS 5 and i got the setup screen for the language and region and eventually i can't activate the iPhone
    as the iTunes says " there is no sim card installed in the iphone that you are attempting to activate "
    However the iPhone is already unlocked and i've been using it with 4.3.3 and also 4.3.5 and it was absolutely fine.
    Now i keep rebooting it and removing the sim card (which is working on another handset alreay) and it says the same msg
    PLEASE HELP !!

    First off, if you're using stuff like Redsnow and Ultrasnow you have violated any kind of warranty you had. This is no longer Apple's problem so look for help elsewhere. Second, you should have known that if you try to upgrade an illegally jailbroken or unlocked phone with the stock apple update, you would lose both the unlock and jailbreak. Obviously you're baseband is messed up and if you flashed it with the iPad 6.15 baseband you're out of luck ever trying to update the iOS version legitimately since you can't undue a baseband flash. You should have known that before you started messing with it. So either get a legit contract with AT&T, sprint or Verizon or try to salvage your mess through a jailbreaking/unlocking forum. You won't get any help here my friend.

  • Unable to restore iphone 3GS after updating with iOS$

    I have a 32GB iphone 3GS purchased online in hong kong and therefore fully unlocked. I updated the software with iOS4 and now it will not fully restore and the error message is "error 29". The phone serial number, phone name etc have all been deleted.

    OK, so nothing else was working so I took my phone into the Genius bar and explained what had happened. The Genius said He was unsure what error 1013 was so he looked it up and explained "It's an error related to the baseband and that more than likely the phone was unable to communicate with Apple servers as Apple had the phone marked as non existent"
    He continued to explain that there was a fix he could do but would be quicker and easier to replace my phone. He did so and I left happy.
    I recomend you just take your phones in if you are having this same issue!

  • My iPhone 3Gs, after update to iOs 5.1, will not connect properly to the Alpine Bluetooth.

    Now My iPhone will send only phonebook via Bluetooth, but not dialed calls or missed calls. Please help me!

    touch me wrote:
    it says ICCID: unknown
    Not a good sign. Try forcing the phone into recovery mode & restoring it. If this fails, make an appointment at an Apple store:
    Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • TS1702 i updated to ios 6.1.3 and now i cant use my iphone 3gs after the update it keeps asking me to setup the phone as a new iphone and register on apple afresh but when i try following the steps they keep telling me they are unable to continue with the

    please can someone tell me what to do so i can be able to use my iphone again after updating the ios 6.1.3 software i cant do anything with mt phone again apart from being able to make emergency calls. please help. at first it was a hearing problem when i recieve or make a call after the software update and now there is no way i could even do anything with it.

    Is there a sim in the iPhone?
    Has the iPhone been jailbroken or modified to work with other
    than the original wireless provider?
    If you can get that far, what does it say when you look at
    Settings=>General=>About=>Carrier?

  • TS1567 I cannot activate my iphone 3gs after I updated to ios 6.

    I cannot activate my iphone 3gs after i updated to ios 6.0.1 and all it shows when i start the phone is connect to itunes. I have tried
    several time to get it back as normal but its the same all the time. Can someone please help...
    Thanks

    The typical cause is that the device has been hacked or jailbroken.

  • IPhone 3GS after updating Ios 6.1.3 cannot be activated

    iPhone 3GS after updating Ios 6.1.3 cannot be activated. When I connected my iPhone to iTunes on PC, iTunes said that there was no SIM card on iPhone. I also took out the SIM Card and took in the SIM Card, but it wasn't working. I activated iPhone through WIFI but it said that the server was temporarily not available. I tried again more and more times but nothing's changed. Please help me.

    See here  >  http://support.apple.com/kb/TS3424
    Also see this discussion.
    https://discussions.apple.com/message/21189708

  • Cannot activate iPhone 3gs after update

    May someone please tell me that why I cannot register my iPhone 3GS after upgraded to 6.XX iOS version? I tried and could not. The other problem I have is I am not is USA. The only way I can get this activated is by iTune, it keeps failing over and over.
    Anyone have idea how can I get this done please? It is very frustrating seeing i ca't use my phone even though it works very good.

    Yes but it is not ATT. I am overseas and I cannot connect to ATT Cell Tower. Moreover it iTune does help also. It seats and times out.

  • HT4623 i use iPhone 3gs, after updating am unable to activate my iPhone how do i go about it

    i use iPhone 3gs, after updating am unable to activate my iPhone how do i go about it

    That's almost always because the phone was hacked or jailbroken to unlock it.

Maybe you are looking for

  • Error in SRM iView calling https screen from R/3 backend.

    Hello All, I have deployed on SRM Bussiness Package on EP and connected R/3 SRM Server with Ep vis system. When i check connection test for system it shows connectioin successfull, But when i navigated to one of the Role present in BP and tried to a

  • WebHelp compile crashes in RH8 and RH6

    I am currently evaluating Version 8 of Robohelp and would like to get all my projects on the same version of Robohelp. Most of my projects are at Version 6. I have another project that is currently at Version x.41 that I would like to upgrade and was

  • DI installation on NW04S

    Dear Gurus, i have installed Central system on NW04S with components 1. Engine - AS ABAP and AS JAVA 2. PI(XI) 3. EP(PortalKMGuided Procedure-CAF+Visual Composer ) 4. BI(Business Intelligence) 5. BI Java Components Server is running fine. But i dont

  • My back camera is blury every time I try to take a picture.

    It it really bothers me that I can't take a clear picture. I tried focusing the camera but it doesn't help at all.

  • "Extendscript.dll was not found" at startup

    Just bought and installed Photoshop and Premiere Elements 12 on my PC running Vista 64 bit. Now everytime I boot up my PC I get an error box titled "Elementsautoanalyzer.exe - Unable to Locate Component" and a message that says ExtendScript.dll was n