Cannot use red button when calling a busy number o...

On my 5800, when I call someone, and it gives the characteristic sound and screen message that the number I have dialed is currently busy, the usual function of the red button suddenly fails. Its attributed function, as told on the screen, has apparently been turned into a "Dialer", which, when I click on it, gives the message "Not allowed" after a couple of seconds in 100% of cases. Therefore, I'd highly appreciate if the usual function of the red button would remain, that is, to quit everything and bring me back to the home screen right away so that I could do something else. As it is now, my 5800 wastes several seconds of my life everytime I call a busy number. So, how to avoid the red button failing when calling busy numbers?

Um, I'd like to inform you that from my experience, this is the same on ALL s60v5 phones. Its not a 5800 only thing. Plus, it wont change. Nokia's not gonna change it. They may change it for other phones but not the 5800. That phone's already past its lifespan in terms of updates.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

Cannot use any buttons or controls when runnning program

When i run my program i cannot use any buttons (e.g. while loop stop,pause, ...) or any numeric controls.
Also i cannost scroll or use tab controls. But the program itself is running normally.. i can see normal results as before.
Problem is it used to work just well before. So i have no idea what happended or if i did something wrong ... but its not working anymore.
Any idea what might be the problem here?

Petricek wrote:
When i run my program i cannot use any buttons (e.g. while loop stop,pause, ...) or any numeric controls.
Also i cannost scroll or use tab controls. But the program itself is running normally.. i can see normal results as before.
Problem is it used to work just well before. So i have no idea what happended or if i did something wrong ... but its not working anymore.
Any idea what might be the problem here?
I guess the doohickey is no longer connected to the whatchamacallit.
Your time would probably be better spent playing detective and trying to figure out what happened to make it get to that state. Does this VI read any sensors or equipment? Maybe the equipment is turned off, causing the VI to become non-responsive until the timeout (and you were just never patient enough for it to reach the timeout before aborting?) It's probably not a LabVIEW issue, but to be safe, check the dates on the files to make sure no one was futzing with it.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Cannot use back button in IE

Dear Sir,
We upgrade from EP6 SP2 to EP6 SP14 , we have the problem that we cannot use backup button in Internet Explorer menu , when clicked , it showed " The paged has been expired" .
Do you have any suggestioned?
THanks and best regards,
Vimol

Hi Vimol,
There are two ways to solve this:
1. SP14 provides a feature called LightWeight Framework Page which supports the Back functionality (from Browser).
2. You may use Breadcrumbs. To set/enable this
i> Navigate to Portal Content -> Content Provided by SAP -> End User Content -> Open the Default Framework Page
ii> Select Page Title Bar and click Properties.
Choose "Show all" in its Property Editor and enable "Show Breadcrumb"
iii> Lastly Save all changes.
Warm Regards,
Ritu
PS: If this answers ur query, kindly provide points.

I cannot use any buttons on the display panel. The power is on and the display is lit up

All-In-One Printer L7780 Windows 7 64-bit
I cannot use any buttons on the display. The power is ON and the display is lit up. I have pulled the plug and waited a while and plugged it back in (several times over two days) but nothing changes.
The diagnostics from the computer don't help. I can see the ink level and I can print a test page but the scanner does not work.
This Printer just works when it wants to. The wireless connection only worked once in a while.
Any help would be appreciated. Thanks! Benno Wallé

This may offer some help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02716671&tmp_task=solveCategory&cc=us&dlc=en&la...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

HT4437 I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

Welcome to the Apple Community Willy.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

I have assisive touch so I cannot use power button on top but my phone wont turn on I tried plugging it in and pressing the home button but nothing is working?

I have assisive touch so I cannot use power button on top but my phone wont turn on I tried plugging it in and pressing the home button but nothing is working?
please help

- Connect to computer and it it shows in iTune restore via iTunes
- Then try letting the battery fully drain. After charging for an hour try the reset (both buttons) and connecting to computer and restore.

HT2417 i cannot use my iphone to call my wive's iphone when i call i receive the message this number is not available

i cannot use my iphone 4s to call my wive's iphone 4s i always receive the message this number is not available

Contact your carrier. It's a routing problem in their system.

Error message when calling a Business Connector RFC destination from SRM

Hello all,
We are facing one problem with data Purchase Order transmission between SRM 5.0 (SRM_SERVER 5.5, extended classic scenario) and Business Connector 4.7.
We made needed customizing in order to have "XML / XI" output medium available in tab 'Company Data' in "Manage Business Partners" web transaction (by updating BBP_USE_AI table in SM30 transaction).
Then, we implemented BAdI definition BBP_EBPXML_OUT_BADI with method PURCHASEORDER in order to change XI system type to Business Connector.
In this way, PO transfer data between SRM and BC is done using BC Module Function BAPI_POEC_XML_SEND (TCP/IP RFC connection was defined for Purchase Order in BBPC_RFCDEST table).
Nevertheless, even if method BBP_PO_SEND_XML is correctly triggered when PO is created with a vendor with XML output medium, we have in the document output log ("Process Purchase Order" web transaction) an error message:
' Error (Unknown Partner and Message Type. Routing Rule created. Sender: SMR Receiver:) when calling RFC destination BC '
where SRM is the SRM log. sys. and BC the Business Connector log. sys.
Our EAI team is working on it, but if you have any idea, your are welcome !
Thank you in advance.
Regards.
Laurent

Hello Christian,
Thank you for your help. However, we abandoned this solution between SRM and Business Connector.
So, we followed instructions indicated in OSS note 883693 - "ECS: PO output determination in R/3".
Nevertheless, in order to restrict this behaviour for specific vendors and purchasing organizations, we added some filters.
It is working fine.
However, when the PO is modified in SRM, then order again, PO is modified in R/3 (by the RFC user from SRM) more than once.
As a consequence, we have as much messages as modifications of the order in R/3 (due to multiple RFC access with the SRM RFC user).
Does anybody have an idea to have only one R/3 output message when the PO is modified in SRM ?
One solution could be to check in the NAST table if the time creation of the last output message is lower than, for example, one minute.
If it is the case, we do not allow R/3 ouput message.
Any suggestions is welcome.
Regards.
Laurent.

How can use a button when a validation fail

Hi,
This is my 'scenario'
In a form I have a button that call a LOV and an Item_code field.
The Item_code field is validated from a trigger with a code like this:
select Desc into Item_desc from Table1 where Table1.Id = Item_code;
exception when no_data_found then
DISPLAY_MESSAGE('Error Code', 'Not Found') ;
raise form_trigger_failure;
All work fine, but I am not be able to use the Search button. The focus is on the Item_code field and if I try to click on the button a message error is displayed.
Please, how can resolve this problem ?

Just do the following:
If :Item_code is not null then
select Desc into Item_desc from Table1 where Table1.Id = :Item_code;
end if;
exception
when no_data_found then
:Item_code := NULL;
:Item_desc := NULL;
DISPLAY_MESSAGE('Error Code', 'Not Found') ;

Text Message- Cannot use Send button

I have the original iphone and since the new upgrade, I cannot use the send button when responding to a conversation. Is anyone else having this trouble? Can anyone else help me resolve this?

Yes absolutely, exactly the same. No solution, sorry.

Red button when?

Dose anyone know how long before full red button services on new vision box will be active?

AllanQuatermain wrote:
I seem to recall Keith [Beddoe] posting a Q about the use of the red button fairly recently. He uses BTV, so I couldnt quite understand that at the time.
Ive tried to find the post, but Keith has more than a few posts under the bridge, and cant. [Perhaps if/when he reads this, he might post a link].
I was trying to disable it on the original BT Vision service, as it kept popping up. It turned out that there was no way to stop it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Does anyone else hate Audio-mercials when calling a business?

Nothing angers me more than trying to call a business and not being able to bypass the stupid automated audio-mercial, especially when it's longer than 10 seconds. Oh and then they say you can go online and do yadda yadda yadda, if I could, I wouldn't be calling.

Hi there
I understand your concerns regarding recorded messages via support lines. Any use of recorded content via our channels is intended to be informative and helpful, though we do understand that these messages can be frustrating when used too often or are too long so we limit their use and length. Thank you for providing this valuable feedback!
Thanks,
Charise

Satellite A300 and WIn7 - cannot use media buttons

I have Satellite A300 laptop.
Recently I reinstalled my Windows 7 Pro x64 using update option (not clean install). So I kept my program and settings. However the media player panel (or whatever it is called) that lets me play, stop music, change songs etc. is not fully working. I can't use 2 "buttons": one that lets me turn on/off highlighting and the other one that turns media player on.
I need them working. I tired Toshiba button support, but I don't know what to do there.

Hello
What you must install is Toshiba Value Added Package. I use Win7 on my A300 and all buttons work perfectly. But I use 32bit version.
I dont know if your A300 is supported for Win7 64 bit but you can try to use THIS version.
Before you start installation remove old version, if exist, restart notebook and install this version.
I hope this will help you.

How to use same transaction when calling CMP entity beans and DAO (JDBC)

We are currently using Weblogic 8.1 SP2 with an Oracle 10g database (using XA thin and non-XA drivers).
We have a session bean that invokes an entity bean and a DAO (data access object pattern) in order to add data in 2 separate tables (account and history). Rows are added to the first (account) table using a CMP Entity bean while inserts are done in the 2nd (history) table using a DAO. Here is some pseudo code:
addHistorySessionBean (trans-attribute="Required")
begin
Step #1 - call addAccountEntityBean (trans- attribute="Required")
Step #2 - call addHistoryDAO (get datasource, connection)
end
The 2nd table (history) has a foreign key constraint to ensure that the corresponding key exists in the first (account) table. Unfortunately, DAO inserts on the 2nd (history) table fail with a foreign key constraint violation (INTEGRITY CONSTRAINT VIOLATION - PARENT KEY NOT FOUND!) since they cannot see the row added to the 1st (account) table in step #1 by the CMP entity bean.
How does one ensure that all this is done in a single transaction ? It appears that the app server creates two seperate transactions (one for the session bean facade and the entity bean and a 2nd transaction (when we retrieve a connection using the same data source JNDI name) for the DAO.
A post on server side suggested using a "<resource-ref>" in the session bean to tie the two potentially separate transactions together, but that does not work for us. However, I am not sure if we are doing that correctly. After we define the resource ref in the session facade bean, do we use the resource ref "name" attribute to lookup the datasource or do we still lookup the datasource by JNDI name ? Do we need to define the resource-ref tag in the entity bean also ?
Does Weblogic allow using a single transaction for this type of a scenario ? How does one specify within Weblogic that the same transaction should be utilized by the entity bean and any subsequent DAOs?
People have also suggested that we defer constraint checking until the transaction(s) are committed but that sounds like a work acount without addressing this issue. Would postponing the constraint checking in Oracle cause any additional overhead ?
Any suggestions with specific examples or documentation on how to address this issue will be gratefully appreciated.

Thanks for your suggestion. Unfortunately, this does not work since it appears that there are 2 separate transactions going on here. One, the original one initiated by the session bean and used by the entity bean and the other initiated by the DAO. Any other ideas appreciated.
Hi,
Try setting the delay-database-inserts tag to
ejbCreate in RDBMS descriptor file.
http://bernal/stage/wls/docs81/ejb/DDreference-cmp-jar
.html#1113981
vasanthi ramesh

Using a button to call a method

I am trying to get the button actionPerformed to call the connect method. But I get this error message on compile:
ras@2[nuvu]$ /usr/jdk/jdk1.6.0_04/bin/javac MonitorView2.java
MonitorView2.java:77: connectPort(java.lang.String) in MonitorView2 cannot be applied to ()
connectPort();
Can someone decipher this for me? Why can't this be done? thx
public class MonitorView2 extends JFrame {
 static SerialPort serialPort;
 ByteArrayOutputStream asciiStream = new ByteArrayOutputStream();
 public MonitorView2() {
 super("Monitor View 2");
 JPanel pane = new JPanel();
 setContentPane(pane);
 JButton testButton = new JButton("Test Comm On");
 pane.add(testButton);
 setSize(600, 300);
 setVisible(true);
 setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 class TestButtonHandler implements ActionListener {
 public void actionPerformed(ActionEvent e) {
 System.out.println("Test button action works!");
 try
 String a = "33, 48, 48, 66, 67, 78, 49, 13"; //comm on;
 //ByteArrayOutputStream asciiStream = new ByteArrayOutputStream();
 byte[] buf = a.getBytes();
 asciiStream.write(buf);
 System.out.println("Buffer as a string");
 System.out.println(asciiStream.toString());
 System.out.println("Into array");
 byte[] b = asciiStream.toByteArray();
 for (int i=0; i<b.length; i++) {
 System.out.print((char) b);
 catch (Exception ex)
 System.out.println("Exception has been thrown :" + ex);
 connectPort();
 testButton.addActionListener( new TestButtonHandler());
 public void connectPort ( String portName ) throws Exception {
 String defaultPort = "/dev/ttyS0";
 String asciiString;
 Charset asciiCharset = Charset.forName("US-ASCII");
 CharsetDecoder decoder = asciiCharset.newDecoder();
 //byte[] b = {33, 48, 48, 66, 67, 78, 49, 13}; //comm on
 byte[] b = asciiStream.toByteArray();
 ByteBuffer asciiBytes = ByteBuffer.wrap(b);
 CharBuffer bChars = null;
 try {
 bChars = decoder.decode(asciiBytes);
 } catch (CharacterCodingException e) {
 System.err.println("Error decoding");
 System.exit(-1);
 System.out.println(bChars);
CommPortIdentifier portIdentifier = CommPortIdentifier.getPortIdentifier(portName);
if ( portIdentifier.isCurrentlyOwned() )
System.out.println("Error: Port is currently in use");
else
CommPort commPort = portIdentifier.open(this.getClass().getName(),2000);
if ( commPort instanceof SerialPort )
SerialPort serialPort = (SerialPort) commPort;
serialPort.setSerialPortParams(4800,SerialPort.DATABITS_8,SerialPort.STOPBITS_1,SerialPort.PARITY_NONE);
InputStream in = serialPort.getInputStream();
OutputStream out = serialPort.getOutputStream();
(new Thread(new SerialReader(in))).start();
(new Thread(new SerialWriter(out))).start();
 out.write(b);
 out.flush();
else
System.out.println("Error: Only serial ports are handled by this example.");

Seriously, learn the basics.
Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806]. Gosling is
the creator of Java. It doesn't get much more authoratative than this.

Cannot use red button when calling a busy number o...

Similar Messages

Maybe you are looking for