Cannot use scanner with WLan with Advent AW10 printer

I have a Satellite L500D-11R using Windows Vista.
I have purchased an Advent AW10 printer with wi-fi functionality.
I am able to print documents and photos with no problem, however I cannot use the scanner with wi-fi.
After several lengthy talks with Advent support, not very useful, I was asked if I had Twain_32 on my laptop.
I have searched my machine and there is no trace of Twain.
I need to download a current version of Twain_32 and have been told to get this from the supplier of my laptop.
The web, I have learnt, is not the safest way to download Twain_32 due to security issues.
I have looked for a Toshiba and Microsoft download with no luck.
Can anyone help?

Hi mate
I think this is not a Toshiba issue but this question should be addressed to the manufacturer support of printer.
However, our community tries to help everyone as good as possible
I searched a little bit and found this youtube video how to repair TWAIN_32.DLL error
http://www.youtube.com/watch?v=H6nLWR9TLgY
Otherwise you will need a support from printer manufacturer

Similar Messages

  • I get the message "You cannot use the application "AdobeApplicationManager" with Mac OS X

    I get the message "You cannot use the application "AdobeApplicationManager" with Mac OS X

    Hi LegallyArmedAm,
    Are you still getting the message?
    -Dave

  • Cannot use the application "Safari" with Leopard

    When I try to open Safari in my non-admin account I get an error message reading 'You cannot use the application "Safari" with this version of Mac OS X'.
    Bizarrely, if I logon as the admin account it works perfectly.
    I have repaired permissions, run software update, repaired permissions again, logged in as SU and fscked and still the same thing. I discovered that Omni Outliner would open the plist but I don't have the knowledge to interpret that.
    I think I have used Safari on this laptop since upgrading to Leopard. Most of the time I use Firefox so it hasn't been an issue anyway. The really bizarre thing is it works normally in the admin account.
    All suggestions welcome.

    Thanks for that. Tried it to no avail
    I have found out what has gone wrong but I have no idea how.
    I keep all my browsers in a subfolder of the applications folder. I trashed Safari with the intention of downloading a clean version from the Apple website. When I got there I couldn't find a version for OS X (there may be one, it just isn't obvious). So I thought I'd just try Safari one more time from my admin account. Of course the app wasn't in the browser folder. So I went to put it back in the applications folder with the intention of moving it from there to the browsers subfolder.
    But no. There was already a newer version in the applications folder. How did it get there? I have no idea. But it opens. So I've moved it to the browsers subfolder and it still works.
    So problem solved. I don't understand how it happened. And especially why it worked all along in the admin account.
    Thanks to everyone who suggested solutions.

  • "YOU CANNOT USE THIS APPLICATION SAFARI WITH THIS VERSION OF MAC OS X"

    hi, just downloaded the update for mac 10.5.1 - all went well - then tried to open Safari and received this message "YOU CANNOT USE THIS APPLICATION SAFARI WITH THIS VERSION OF MAC OS X" - I have tried downloading Safari again through netscape but that does not seem to work either - ANY IDEAS???? Thanks

    It sounds likely that you have more than one copy of Safari on your hard drive. The one in your Applications folder is the one you should have. The one you're trying to launch is an older version that somehow got moved somewhere else, so that the new version got installed in your Applications folder (where it should be) while the old version is running (or trying to run) from another location.
    First, double-click on the Safari application file that you have in your Applications folder. Does it run properly, without error messages? If so, everything is fine. You just need to get rid of the old version of Safari and set it up so you can easily launch the new version that is in your Applications folder.
    Are you clicking on the Safari icon in your Dock when you see the error message? If so, do this: Control-click on the Safari icon in your Dock and select "Show in Finder" from the contextual menu. A Finder window should open showing the location of that copy of Safari. If that Finder window is any location other than the Applications folder, delete the Safari file that is in that folder. Then drag the Safari icon out of your Dock. Navigate to your Applications folder and drag the Safari file from the Applications folder to your Dock.
    You should be all set, but click on the new Safari icon in your Dock to make sure it is the correct version and runs without problems.
    Message was edited by: Rachel R

  • " You cannot use the application "iTunes" with this version of MAC OS X."

    I am getting the response " You cannot use the application "iTunes" with this version of MAC OS X." How do i get Itunes on my Mac. I tried to download the newest version but it won't let me do that either.

    What operating system version are you using on your Macbook?  If you are still using Tiger 10.4 the new iTunes requires Leopard (10.5) or higher.

  • I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

    I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. You can get the latest version of Firefox 3.6 which works on OS X 10.4 from http://www.mozilla.com/en-US/firefox/all-older.html

  • I am trying to print off some work on my advent AW10 printer by connecting it with a usb cable to my macbook pro 13" 2011. On my laptop it keeps on saying printer failed. What do i do??

    I am trying to print off some work on my advent AW10 printer by connecting it with a usb cable to my macbook pro 13" 2011. On my laptop it keeps on saying printer failed. What do i do??

    Hello molad,
    Welcome to Apple Support Communities.
    Take a look at the article linked below, it provides troubleshooting tips that can help you solve the issue printing from your MacBook Pro. 
    Troubleshooting printer issues in OS X - Apple Support
    So long,
    -Jason

  • How to use "scanner advanced" signal with DMM 4060?

    Hi!
    We're using SCXI-1128 switches with 1331 terminal blocks. The switches should communicate with the PCI DMM 4060 via the SH9MD cables.
    Does someone know if there is a possibility to use the scanner advanced signal from the switch over these cables (for handshaking)? The documantation says the signal is only available on the front connector (1331) which does not make much sense in my eyes...
    I'd be glad if someone could help me here.
    Best regards,
    Jan

    When you are using the SH9MD to communicate from the 4060 to an 1128, you are using the cable for SCXI communication. You are connecting this cable to the back of the 1128 and the only signals it can carry are SCXI communication and the Measurement Complete (MC) from the DMM to the Switch. The 1128 cannot route his Scanner Advanced (SA) signal to the back where the SH9MD connects, and there are not any available PIN to carry it.
    If you want to use handshaking with a PCI 4060 and a 1128, you will need to control the Switch using a different controller than your PCI 4060 (another 4060/4070/4021) connected to the back of the 1128 using the SH9MD cable. You will also need to get the "trigger cable" for your PCI 4060 (available page 298 in 2002 NI catalog). This cab
    le splits the SH9MD into 2 BNCs; EXT TRIG IN and MC. These BNCs need to be connected to the SA screw terminal and to the EXTRIGIN screw terminal respectivelly on the 1331 terminal block.
    The DMM will need to be set to external for both the Trigger/Sample trigger and the MC destination. The Switch would also have its SA destination and input trigger set to "front of module X".
    A very good source of information in the "NI digital multimeter help" available on the Web. Check out the Triggering section under the Programming heading.
    Good luck.

  • Cannot use IP-phone-7921 with EAP-Fast using internal WLC Radius

    Hello,
    I Cannot authenticate IP-phone when I use internal WLC-radius with a profile "eap-fast"
    The eror message I recieved on a debug is:
    *Mar 09 03:15:09.765: Unable to find requested user entry for anonymous
    But of course there is a user configured on my ipphone !
    Note1 : I use a WLC with version : AIR-4400-K9-5-1-163-0 (AES)
    Note2: When I use LEAP it is OK
    Note3: When I try with my PC to autenticate in eap-fast with internal WLC radius, it is OK.
    See attacehement for more detail.
    Many thanks in advance.
    Michel Misonne
    *Mar 09 03:15:09.765: Unable to find requested user entry for anonymous

    ABSOLUTLEY DO NOT DO THIS!
    config advanced eap identity-request-timeout 120
    config advanced eap identity-request-retries 20
    config advanced eap request-timeout 120
    config advanced eap request-retries 20
    This can cause you issues for up to 40 minutes. 20 attempts * 2 minutes apart
    Please take a look at
    https://supportforums.cisco.com/docs/DOC-12110
    config advanced eap identity-request-timeout 5
    config advanced eap identity-request-retries 12
    config advanced eap request-timeout 5
    config advanced eap request-retries 12
    would be much better, as it is only 60 seconds.  No device should take longer than 5 seconds to respond, but sometimes the phones need more than the 1 second default.
    HTH,
    Steve

  • I cannot use my pci5112 card with LV ver. 6.0

    I'am trying to use my pci5112 card with LV 6.0 using the DAQ solutions. I get a message saying that I have not configured any DAQ devices. When I launch MAX I see the card there and the test panels are ok.
    I have the niscope1.6 driver installed.
    Any ideas?
    Thank you in advance.

    The PCI-5112 can only be programmed with NI-Scope. That's why the PCI-5112 does not work with the DAQ Solution Wizard.
    Fortunately, there are lots of good examples for NI-Scope in LabVIEW. You can find these in the C:\Program Files\National Instruments\LabVIEW 6.0\examples\instr\niScope directory. I would recommend starting with the Configured Acquisition example and then going from there depending on the needs of your application.
    Hope this helps,
    Jack

  • Satellite Pro L300 - Cannot use Intel ProSet WLan tool with Win XP

    Hi! I have same problem. I have installed an XP SP3 and I can't use the *Fn+F8* hotkey to switch on/off the WLAN function. Other Fn keys operate properly. The wlan also operates, but it can be used only by windows built-in function. The Intel ProSet or Atheros programs don't work. It seems "no wlan driver installed". The card is a Realtek 8187B, downloaded the driver from Toshiba original support site.What can I do?

    > The WLan also operates, but it can be used only by windows built-in function. The Intel ProSet or Atheros programs don't work
    If the WLan works fine using the Windows zero configuration then the WLan card is enabled and dont need to use the FN+F8.
    The point is that your 3rd party WLan configuration tool doesnt work because your WLan card is *Realtek!!!!*
    The Intel ProSet works ONLY with Intel WLan card and the Atheros Wlan configuration tool can be used ONLY if your have got a Atheros Wlan card.
    Youve got Realtek so use the Windows own zero WLan configuration!

  • Cannot use Western Digital HDD with Pismo?

    Good evening,
    I am trying to use a Western Digital Passport 250GB external HDD USB with my Pismo, but it mounts the HDD, but says it is unreadable and then forwards me to the Disk Utility. It seems the HDD but I can't partition it or anything. So, I partitioned it on my G4 iMac, on which it works perfectly, and then removed it and tried to use it on the Pismo; again, no luck! Is this a fool's errand or am I doing something wrong? Please advise as I need more than the 20GB internal HDD.

    spcmiller,
    I am sorry the suggestion did not work but underpowered USB ports on Mac portables is an issue with external USB HDs. You have something else going on which I cannot answer.
    I would suggest posting in the Powerbook G4 (15-inch Titanium):
    http://discussions.apple.com/category.jspa?categoryID=129
    The Titanium also has USB 1.1 ports, has issues with USB HDs, and the forum has more activity than the Older Powerbook Computers. Also, if you wish, perform a search in the Titanium forum for 'USB western digital' for many posts. I saw none that matched your experience. When you post, I would explain that you have a Pismo and were sent to this forum for the reasons I mentioned; you can even link to this thread if you wish.
    Sorry I could not solve your issue.
    Message was edited by: jpl

  • Cannot use the recovery disc with my Satellite A100

    I have Satellite Pro A100 Series, when I boot it up it tells me "Windows could not starte because the following file is missing or corrupt" \WINDOWS\SYSTEM32\CONFIG\SYSTEM
    I have tried to reboot with the recovery disc in and pressed F12 for the boot menu, selected CD/DVD and nothing happens.
    Any help or ideas would be great,.

    Hi!
    This is strange but if you have tested different disks on your notebook it seems that your CD/DVD drive is faulty and must be replaced.
    How do you think about this?
    If you have Windows Vista on your notebook you can use the HDD recovery function. Go in the advanced boot menu, select repair my computer and follow the screen instructions.
    Anyway, I think you must replace the CD/DVD drive to solve the issue.
    Bye

  • I cannot use Google Maps directions with Firefox. I get java void when I click on directions in Google Maps.

    I can use Internet Explorer to get directions with Google Maps but when I use Firefox 3.6 the task bar reads java void and no directions are displayed. How do I fix this?

    FF 7.0.1 SafeMode
    Mac OS 10.6.8
    Search for one location, Directions, enter 2nd location, Get Directions.
    Map shifts & displays correct area for route, but Loading appears and stays, route never appears.
    Works correctly in Opera, Safari & Chrome on same machine.

  • Cannot use seconf graphics card with Hp envy Recline

    The HP recline has 2  display adapters , INtel integrated 4600 and Nividia Gt730A. I tried to force use of the Nividia card by selecting it in the nividia control panel as the default card but it does not work. I ran dxdiag and it still show intel as the default card.
    I  tried to run 3DMark11 buy selecting Nividia but it wont run and I gethis error message:
    "Workload Single init returned error message: No outputs found on DXGI adapter"
    3Dmark11 will run with either Auto or Intel graphics card selected (but with very poor frame rates )
    So now I am not sure whether the GT730 is working of not  or is there something wrong with DXGI? , DX11? 
    Advise please.

    The 3D mark11 support forum informed that this is normal.  Explanation is as follows:
    Quote:
    "This is due to how your system is set up. The dedicated video card has no outputs - it isn't connected to a monitor. Instead your system uses some fairly elaborate gaffer tape in the video driver to render things in the dedicated card, then copy them to the integrated card video buffer which then displays them to the monitor.
    In systems like this only "auto" will work. It should still use the dedicated card (score should be different from using just the integrated one forced). "
    End Quote:
    At end of the 3DMark 11 Tests , the summary did indicate that GT730A was used .  So it's not really an issue but rather the way the dual graphics cards work in the HP Envy Recline.

Maybe you are looking for