Cannot use seconf graphics card with Hp envy Recline

The HP recline has 2 display adapters , INtel integrated 4600 and Nividia Gt730A. I tried to force use of the Nividia card by selecting it in the nividia control panel as the default card but it does not work. I ran dxdiag and it still show intel as the default card.
I tried to run 3DMark11 buy selecting Nividia but it wont run and I gethis error message:
"Workload Single init returned error message: No outputs found on DXGI adapter"
3Dmark11 will run with either Auto or Intel graphics card selected (but with very poor frame rates )
So now I am not sure whether the GT730 is working of not or is there something wrong with DXGI? , DX11?
Advise please.

The 3D mark11 support forum informed that this is normal. Explanation is as follows:
Quote:
"This is due to how your system is set up. The dedicated video card has no outputs - it isn't connected to a monitor. Instead your system uses some fairly elaborate gaffer tape in the video driver to render things in the dedicated card, then copy them to the integrated card video buffer which then displays them to the monitor.
In systems like this only "auto" will work. It should still use the dedicated card (score should be different from using just the integrated one forced). "
End Quote:
At end of the 3DMark 11 Tests , the summary did indicate that GT730A was used . So it's not really an issue but rather the way the dual graphics cards work in the HP Envy Recline.

Similar Messages

Use of graphics card with core install

Hi,
We have a sun sparc server that has the solaris core installation. We run our Jrun application server on this machine. We would like to use a mapping software called Mapxtreme that needs a graphics card on the server. Can I use a graphics card without upgrading the core Solaris OS installation.
Thanks,
Sreeni

Well first the limit for the device is 1GB SD Card.
You can store music, videos, pictures, documents (word files, books and pdf files to name a few) and programs.
Message Edited by IrreducibleM31 on 03-13-2009 08:19 PM

I cannot use my pci5112 card with LV ver. 6.0

I'am trying to use my pci5112 card with LV 6.0 using the DAQ solutions. I get a message saying that I have not configured any DAQ devices. When I launch MAX I see the card there and the test panels are ok.
I have the niscope1.6 driver installed.
Any ideas?
Thank you in advance.

The PCI-5112 can only be programmed with NI-Scope. That's why the PCI-5112 does not work with the DAQ Solution Wizard.
Fortunately, there are lots of good examples for NI-Scope in LabVIEW. You can find these in the C:\Program Files\National Instruments\LabVIEW 6.0\examples\instr\niScope directory. I would recommend starting with the Configured Acquisition example and then going from there depending on the needs of your application.
Hope this helps,
Jack

Can I use this graphic card with P35 V1.0

http://www.falconcomputers.co.uk/generic/website.asp?dept=63&page=productDetail&liwCode=100018024
It says PCI express 2 will it work with my P35 MS-7360 V1.0 ?
Thanks

Quote from: Henry on 17-December-09, 07:50:46
If you're referring to the one with 2 wires it is for connecting MB S/PDIF pinheader out to the VGA in S/PDIF for HDMI sound.
Yes thanks.

Usb mouse auto disconnect time and time,Screen flash and flash when I use discrete graphic card

as title
My usb mouse auto disconnect and reconnect time and time,
no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
Mouse: Logitec G400/G1
Display:Lenovo D2081WIDE
machine:T430 2349 CTO

system info:
machine TYPE: THINKPAD T430 /2349CTO
operating system :Lenovo OEM ultimate X64 SP1
mouse type:Logitech G400 and Logitech G1
time:from 2012-10 to now
threat NO.1
USB mouse auto disconnect and reconnect time and time,no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
every time when the mouse disconnect I heard the sound which like USB DEVICE unplug,and when it reconnected I heard the sound which like USB DEVICE plug in.
threat NO.2
Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
threat NO.3
the battery auto losing capacity!!!!!!
1% everyday about 0.2Wh
since I bought to now,
the Design capacity has losing from 57.XX Wh to 47.52Wh
and full charge capacity is 48.68.
the battery info:
cycle count is 18
Bar-Code number 1ZKFD27S1RF
SerialNumber 1896
First used date 2012-09
FRU 45N1001
Firmware 0003-0080-0100-0165

What is the safest way or software to use to flash graphic card with ?

Hello I need UEFI GOP VBios for this card.
S/N: 602-V284 46SB 1307001929
Bios: 80.01.BF.00.30 (P2004-0010)
MotherBoard: Asus X99A - Latest Bios Installed - Version 1203 (12-2014)
If you can provide the rom:
What is the safest way or software to use to flash graphic card with ?
Thanks.

Hello, thank you for all these informations.
Right now my graphic card current Bios Version is 80.04.00.2F (P2004.0010). Is it the good one ?
I've found out yesterday evening about the GPT Drive, when I saw it on my laptop which works fine with UEFI fastboot mode.
For the moment the main drive on my desktop is MBR formated SSD.
Is it safe to clone the MBR SSD Drive to another GPT formated SSD Drive ?
In my Partition soft I saw that it can convert MBR Drives to GPT without data loss. Could this work ?
Thanks for reading me.

Can I use 2 graphic card for optimisation in adobe?

Hi, I am using Adobe CS6, Premiere pro, After effect, Photoshop, InDesign.
Current set up is Dell XPS 8700, GTX 650 Ti, 128gb Plex SSD, 2TB 72krpm HDD, 16DDR3 non-ECC ram.
I am looking to build a LGA 1366 dual xeon processor workstation.
Plextor M5 Pro as main hardisk for application cache
2x Intel Xeon X5570
16ddr3 10600Registered/ECC ram
SAS 10k rpm HDDs support 6gbps but I only using 3gbps controller (media drives)
Graphic cards:
1x Nvidia Geforce GTX 650 Ti
1x Nvidia Quadro FX 1800
Need advice on the possibility of using both graphic cards in my upcoming set up.
eg, ulitilising the Cudas on my GTX while still enabling the use of quadro fx 1800. (not sure if Quadro fx1800 can enhance the flow..)
If able, pls share some light on how to go about enabling both graphic to use in adobe
My work is mainly, photo and video editing.

Hi Stormancer,
You cannot use two different graphics cards in SLI which is the main benefit of having two cards.
As far as I am aware the FX1800 is optimised for CAD use when you state mainly editing photo and video so I can't see that card being particularly beneficial to you.
If you can afford it why not just buy a better spec single card either the Quadro or GTX?
I currently run a Windows 7 64-bit system with an i7 3700k, three SSD 6/Gbps, RAID 6/Gbps and 2300 Mhz memory with a recently upgraded GTX 680 and find it more than capable of both photo and HD video editing plus some After Effects work. I would class myself as a serious Hobbyist (with 30 years PC experience) and suspect that yes you need the latest kit if you are editing professionally because of the deadlines and high quality required but once you reach a certain level, the gains are very negligible.
While I was looking to upgrade my card, people on here suggested the Quadro K5000 mainly because I have a 10-bit NEC PA301W (25th anniversary present off hubbie) but this card was out of my budget so I settled on the GXT680 and find it more than capable for my needs. It is much faster than the old Radeon 5770 I had. However, while researching I came across this site which explains the way Mercury GPU is utilised, you may find it helpful:
http://blogs.adobe.com/genesisproject/2011/10/diving-into-nvidia-gpus-and-what-they-mean-f or-premiere-pro.html

Please help - Motion trial checker says motion cannot .. graphics card...

Motion trial checker says motion cannot be installed graphics card... I have 2 graphics cards: both NVIDIA Geforce 7300 GT in my Macpro 3Ghz... I am using only 1 card with a vga monitor. It says my graphics card does not meet the minimum requirement for motion. but it does. I tried it with a different monitor but I get the same error please help

Welcome to the discussions!
Motion compatibility checker...well, that's an old app!! You're probably looking at the wrong place-at the Motion for PowerPC pages.There used to be a trial for Motion version 1 and/or 2 but both will not work in an Intel processor Mac. The Universal binary version ( 2.1 and later ) has been integrated into Final Cut Studio and there's no trial or checker for Motion since then.
For specs-that you definitely meet-look here: http://www.apple.com/finalcutstudio/specs.html

Do I need to tell Lightroom to use the Graphics Card in my new laptop?

HI!
I have a new laptop and have successfully transferred my pics, catalogue and LR settings across.
It has better specs than my last one, including a decent (I think!) dedicated graphics card. I have always had integrated graphics before so am not sure how this works. Do I need to tell applications, such as Lightroom, to use the graphics card, or will this be automatically be done by the software/operating system? If I do need to do anything, is this in each software (like Lightroom), the computer settings, or in some third party control software?
Thanks for your thoughts.

Thanks for that. That seems a shame, although hopefully the increased CPU will help it run more smoothly anyway.
Do you know off hand whether I would need to do anything for other programs with regards to the graphics card or is everything automated?
thanks again

Imac Graphics cards with Premiere Pro cs6

Hello
I just changed over to Premiere Pro cs6 from avid and fcp 7/x. I am already sure i made the right decision. I love the interface, i really love it! and cant wait to get stuck into it properly.
I just bought a brand new, all singing all dancing 27 inch imac full spec 32gb RAM with a NIVIDA Geforce GTX 680MX 2048mb card. However pro cs6 by default is using the “Mecuary playback engine sofware only” instead of the “Mecuary playback engine Acceleration [CUDA] and i cant change it. Does it cs6 not support this card and if so will it in the future?
Any help would be greatly apericated!
Kind regards
Philip

Hi Paul
You mention last week that you had the same problem as me with your new iMac and graphics card with cs6.
I was just onto Adobe and they told me that they could not assist.
Can you tell me who you death with?
I am really keen to get this card running!
R
Philip

Can I use ATI graphics cards in SLI in MSI-7100?

My stupid-question-ometer is going off the scale, but I don't know the answer; can I use ATI graphics cards in SLI in my machine?
Also, whilst I'm at it, according to my knowledge, AMD are considered, in general, the lowest cost per unit power. Is it the same with ATI or nVidia - which generally offers best value?

And can you refine your other question, please. For one, ATI and AMD is one company now. Intel and AMD/ATI mostly have processors that in normal run are equal, but Intel has more refined top-end processors. In benchmarks Intel's normally score higher.

HT1904 I recently received a substantial refund from purchases my grandson of 8purchased. I tunes graciously refunded the money. However now I cannot use my credit card to make purchases for thr game I play.

I recently received a refund from I tunes which I appreciated. My little grandson who is 8 made $460 worth of purchases without my knowledge. However now I cannot use my credit card for further purchases on the game I play. Getting itnacross to ITunes is difficult.

dawnfromcabot wrote:
ITUNES HAS CHARGED MY DEBIT CARD $99.99 FOR GLOBAL WAR RIOT-SOME GAME I DID NOT KNOW WAS LOADED ON MY OTHER PHONE; HOWEVER, WHEN I PULLED UP THIS APP TO SEE EXACTLY WHAT IT WAS WAS I SURPRISED TO SEE I COULD DOWNLOAD IT FOR 'FREE'. I HAVE CONTACTED ITUNES THROUGH THIS REDICULOUSLY CHICKEN SH_T SYSTEM THEY USE SO THEY DO NOT ACTUALLY HAVE TO HEAR HOW UPSET A PERSON IS NOW THAT THEY CANNOT BUY FOOD FOR THEIR CHILDREN BECAUSE OF A MISTAKE MADE ON ITUNES PART. I DID RECEIVE AN EMAILED RESPONSE FROM STEPHANIE WHO ADVISED THIS WAS PUCHARED ON A PHONE THAT HAS PURCHASED DOWNLOADS IN THE PAST. I WONDER IF SHE THOUGHT TO LOOK AT MY ENTIRE DOWNLOAD HISTORY AND DISCOVER THAT NOTHING HAS EVER BEEN PURCHASED ON MY ITUNE ACCOUNT IN THE AMOUNT REMOTELY CLOSE TO WHAT THEY ARE CHARGING ME NOW. THAT IS BECAUSE I DO TRY TO MONITOR THIS ACCOUNT AND OBVIOUSLY THIS LAST PURCHASE WAS DONE WITHOUT MY KNOWLEDGE UNTIL I CHECKED MY ONLINE BANKING ACCOUNT, WHICH I DO EVERY DAY. TO MAKE MATTERS WORSE THE APP STATES IT IS FREE TO INSTALL WHEN YOU PULL IT UP SO NO ONE HAS CLARIFIED TO MY WHERE THE $99.99 COMES INTO PLAY. I WILL NOT DROP THIS UNTIL MY BACK ACCOUNT HAS BEEN PROPERERLY CREDITED IN THE SAME TIME FRAME IT TOOK YOU TO TAKE MY MONEY. I WILL LAUNCH A COMPLAINT WITH EVERY POSSIBLE ENTITY IN THE ITUNES COMPANY AND BUSINESSES OUTSIDE THAT REGULATE THEIR BUSINESS UNTIL THIS HAS RESOLVED IN MY FAVOR AS I AM THE ONE WHO HAS BEEN VICTIMIZED BY A COMPANY I INVITED INTO MY TELEPHONE NETWORK IN GOOD FAITH!!!!!!!!!!!!
Reading that is giving me a headache, how about normal type.

Upgrading the Graphics Card in HP ENVY h8-1414 Desktop Series PCs

What are the steps you need to do when Upgrading the Graphics Card in HP ENVY h8-1414 Desktop Series PCs, with the HP M3970AM-HP (Angelica2) Motherboard. As it has no onboard video, so if the new card isn't installed correct you will not have picture on monitor.
Going to install Radeon HD 6950 / 70 2GB DDR5

Hi:
The only advice I can offer is to make sure you change the 2 BIOS settings required to be changed when you install a non-HP video card.
See this link...
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03653200&lc=en&jumpid=reg_r1002_us...
Also before you install the new video card, make sure you uninstall the driver from the old video card, shut down the PC and then install the new video card.
To uninstall the driver, go to the device manager, click to expand the display adapters category, right click on the display adapter listed there, select uninstall and check the uninstall driver box. Do not reboot as prompted, shut the PC down.
However, I have no idea if the video card you intend to install is compatible with your PC.

Graphics Card for HP ENVY TouchSmart 17

Graphics Card for HP ENVY TouchSmart 17-j017cl is 32MB and would like to upgrade to 64MB, is this possible?

Hi,
Unfortunately no, your machine uses Intel HD graphics 4600:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03908887
System will work this out and will allocate available system memory up to 1792MB total graphics memory
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I'm confused about running an external graphics card with my MBP and Thunderbolt display

I have a new MBP 13" (not retina) with these specs,
Processor 2.9 GHz Intel Core i7
Memory 8 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000 512 MB
Software OS X 10.8.2 (12C60
My radio control airplane/helicopter flight sim runs slow. Message reads "Warning FPS to low".
I've been reading about using an eGPU but the info seems to be conflicting. Can I or can I not do this? If I can, what do I need?
This is my first Mac and with this one exception I love it. Thanks for any input you folks might provide.
John

AFAIK, there are PCIe TB adapters like this - http://eshop.macsales.com/item/OWC/HELIOSTB1/ - but I don't know that you can use a graphics card in them with a MBP. You might want to give OWC a call, though, and see if they know of someway to bypass the onboard GPU through a PCIe card.
Good luck,
Clinton

Cannot use seconf graphics card with Hp envy Recline

Similar Messages

Maybe you are looking for