Cannot use subpages with WRT160n

Hi all, I just bought a WRT160N-EW and connected a computer (wired) and a laptop (wireless). But now I cannot use more than 1 (one) page at a time. More pages cannot connect to the internet.
Please help!?!
Frans

Are you getting the problem on the wired computer or on the wireless computer...or on both computers...?
Try this..
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
On the set-up tab change the MTU Size to 1300 and click Save Settings...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if it works for you...

Similar Messages

I cannot use itunes with windows 7. I think the problem has something to do with the fact that a 32 bit xp version was loaded on my machine. I can't uninstall it and the 64 bit version will not install.

I cannot use tunes with windows 7. A 32 bit xp version was loaded from my prior computer. It will not uninstall. The 64 bit version will noit install.

I cannot use tunes with windows 7. A 32 bit xp version was loaded from my prior computer. It will not uninstall. The 64 bit version will noit install.

Apple TV 1st generation cannot use AirTunes with Apple TV 2nd generation or Airport express 2nd generation

Is it normal that Apple TV 1st generation cannot use AirTunes with Apple TV 2nd generation or Airport express 2nd generation? I want to play music synced in my ATV 1st gen. to a nymber of speakers in the house. In the list of speakers I can see Apple TV itself and my two Airport Expresses 1st generation but not my Apple TV 2nd generation or my Airport express 2nd generation. For the ATV 2nd gen. I found a solution: when I enable the Airplay setting of XBMC which is installed on my ATV 2nd generation, then AirTunes in ATV 1st gen. sees the speaker "XBMS (Apple-TV)". Itunes can in my Macbook pro can use Airplay with all my speakers, i.e. ATV 1st gen., ATV 2nd gen., Airport Express 1st gen., Airport Express 2nd gen.

Last time I checked ATV1 could not use Airtunes to send audio to an AppleTV 2 or 3 - highly annoying as you think they would have kept backwards compatibiility for audio, but it seems Airplay is more than a superset of Airtunes.
AC

Cannot use comparisons with column column references in pool and cluste

Hi Experts,
I am facing an issue in a select statement written in 4.6 version and in that the table is a transparent table but when porting it to ECC6.0, it gives the follwing error:
You cannot use comparisons with column column references in pool and cluster tables:'A~MATNR'. refe
The select statement is as below:
SELECT akschl alifnr amatnr aekorg awerks aesokz
         aknumh adatbi a~datab
         bmtart bmatkl
        b~yybcezndr " Commented as not required(IDE)
         cwerks cmmsta c~herkl
            INTO CORRESPONDING FIELDS OF TABLE gt_a017
            FROM a017 AS a
           INNER JOIN mara AS b
            ON bmatnr = amatnr
             INNER JOIN marc AS c
               ON cmatnr = bmatnr
              AND cwerks = awerks
             INNER JOIN lfa1 AS d
             ON dlifnr = alifnr
            WHERE a~kappl = 'M'           AND
                  a~lifnr IN s_lifnr              AND
                  a~matnr IN s_matnr        AND
                  a~ekorg IN s_ekorg        AND
                 a~kschl = v_kschl        AND
                  a~kschl = gv_kschl       .
Kindly help me out in this as A017 is a pooled table in ECC 6.0 . Thanks in advance!!!
Thanks and Best Regards,
Sahil

Hi Sahil,
Refer below code
SELECT KSCHL LIFNR MATNR EKORG WERKS ESOKZ
       KNUMH DATBI DATAB
FROM A017
INTO IT_A017 " internal Table
WHERE KAPPL = 'M' AND
        LIFNR IN S_LIFNR AND
        MATNR IN S_MATNR AND
        EKORG IN S_EKORG AND
*         kschl = v_kschl AND
        KSCHL = GV_KSCHL .
IF IT_A017[] IS NOT INITIAL.
    SELECT MATNR MTART MATKL
          FROM MARA
      INTO TABLE IT_MARA" internal Table
      FOR ALL ENTRIES IN IT_A017
      WHERE MATNR = IT_A017-MATNR.
    SELECT MATNR WERKS MMSTA HERKL
      FROM MARC
      INTO TABLE IT_MARC" internal Table
      FOR ALL ENTRIES IN IT_A017
      WHERE MATNR = IT_A017-MATNR AND
            WERKS = IT_A017-WERKS.
    SELECT LIFNR
      FROM LFA1
      INTO IT_LFA1" internal Table
      FOR ALL ENTRIES IN IT_A017
      WHERE LIFNR = IT_A017-LIFNR.
    ENDIF.
After this use READ statement and fill the data in final internal table..
Please search on SCN for more information about how to use FOR ALL ENTRIES..
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

Cannot use Safari with this version of OSX??

I recenlty installed Leopard on my G5 (pre-Intel but with 2GB). I have iLife 08 and Safari 3.
On one of the Account windows I get the message that "You cannot use the application Safari with this version of Mac OS X".
It works fine on my (administrator) account.
Any thoughts on this one please.
BTW, it is my children's account and I have some (but not stringent) parental controls.

Alternatively, see the steps I posted for resolving conflicts/corrupt plists within an account at:
http://discussions.apple.com/thread.jspa?messageID=4703015

Cannot use scanner with WLan with Advent AW10 printer

I have a Satellite L500D-11R using Windows Vista.
I have purchased an Advent AW10 printer with wi-fi functionality.
I am able to print documents and photos with no problem, however I cannot use the scanner with wi-fi.
After several lengthy talks with Advent support, not very useful, I was asked if I had Twain_32 on my laptop.
I have searched my machine and there is no trace of Twain.
I need to download a current version of Twain_32 and have been told to get this from the supplier of my laptop.
The web, I have learnt, is not the safest way to download Twain_32 due to security issues.
I have looked for a Toshiba and Microsoft download with no luck.
Can anyone help?

Hi mate
I think this is not a Toshiba issue but this question should be addressed to the manufacturer support of printer.
However, our community tries to help everyone as good as possible
I searched a little bit and found this youtube video how to repair TWAIN_32.DLL error
http://www.youtube.com/watch?v=H6nLWR9TLgY
Otherwise you will need a support from printer manufacturer

Cannot use Chess with this version of Mac OSX...?

When I first installed Leopard, Chess (the Apple app) worked fine. Now, after updating to 10.5.1 I get a message saying I can't use it with this version of OSX when I try to open it. Any idea why? Can I get Chess back? Is it just me?

Andrew Butterfield wrote:
Obviously some little glitch, but now it's working fine. Just wish I could beat it occasionally. Still, hope lies eternal...
It is likely that in the Dock, you had a pointer to the pre-Leopard version of Chess left over from an upgrade or archive & install, so that version was trying to launch from the Dock. "Get Info" tells me that Leopard's Chess is version 2.3 & it even has a checkbox for "Open in 32 bit mode" -- something I haven't seen before.
If you have any other similar Dock-related glitches, use the "Show in Finder" Dock menu option to find the app & see if it looks like a Tiger "leftover."

Cannot Use ichat with this version of OSX

Please help!
I installyed leopard and now when I try to use ichat I get the a message saying I can not use ichat with this version of OSX. What can I do to try to fix this?
Thanks!

Also Click and hold the icon in the DOCK and Use Show In Finder.
When you get to the folder that the version of iChat the DOCK is linked click on the title of the Window to see the path to the Folder.
An Archive and Install may include a Previous System part.
You should see
Applications
Hard Drive (name)
Computer (Name)
NOT
Applications
Hard Drive
Previous Systems
Hard Drive
Computer
3:20 PM Saturday; December 29, 2007

Cannot use Battery with Logic pro

An Know how to use battery2 with logic
because seems the logic au managerr can't find battery

hi
did you run the au validation programm? maybe if the validation crashed or didnt work you should update battery with the au hotfixes. battery 1 and 2 working for me since first installation.
if the registration of battery or other plug-ins expired they will also crash in the au manager.
best
marc

Cannot use 3G with macair since upgrading

cannot use my 3G since upgrading to Yosemite

You may need updated drivers. Since you've provided no details on the maker, I'll just say "Google it."

Cannot use 1Password with Portable version of Firefox 11 or later

FF10 Portable and the old 1Password Extension for FF10 are the last versions that will work together (there is a small Firefox INI file hack needed to get it to work). 1Password will not work with FF11 Portable or later, even with the FF hack. This is supposedly due to the new security model introduced in FF11.
I really prefer the security of using portable versions of browsers where all browser data (files, history settings, cookies, cache, etc) is contained within a single base folder that can be located on an encrypted (TrueCrypt) drive.
'''So I am stuck with FF10 Portable and the old 1P extension, and cannot upgrade either unless someone knows of a new hack. ''' If not, I will probably have to switch to LastPass.

Reading the description of how their new add-on works, I think you might need to talk to the Firefox Portable people about whether it can be supported (I'm sure this won't be the last extension to make this kind of change):
"...we changed it to use a websocket connection, which creates a localhost connection (internal system, no internet/network connection is used) between the 1Password extension and the 1Password app."
See: Comment #12 in [http://support.agilebits.com/discussions/1password-for-windows/715-firefox-warning-1password-incompatible-with-firefox-11#comment_14705977 Firefox warning 1Password incompatible with Firefox 11 / 1Password for Windows / Discussion Area - AgileBits Support]

Cannot use gmail with thunderbird , with recent: mode enabled (gmail service issue)

Up until this morning I was using recent: mode for my gmail account to download mail over pop3.
No when the username is recent:[email protected] I cannot auth anymore. (wrong password message appears)
If i remove recent: from within the username it works perfectly.
Anybody experiencing the same issue ?
For now, I switched to imap to my other mobile devices and only use one account with pop3 (computer).

Matt,
First I checked with Gmail forums and there is already a thread there about this issue. I also created a new profile on Outlook 2010 with "recent:" mode and it works. So, this leads me to think it is thunderbird specific? Adding to what xjust explained, I am using "recent:[email protected]" in the username field on Account settings/server settings. This way I can get all the emails on all devices I setup regardless of whichever grabs it first. "[email protected]" as username works. So a wild guess, maybe there is a check/truncation for ":" character in username field on 24.4 update?

Cannot use Airport with my Windows partition

I have an Airport that I use with my iMac and never had problems.
But I cannot get Airport to work with my Windows partition installed with Bootcamp (Windows XP SP2).
My wireless network appears in the window among others, but when I choose it, I cannot connect. And the Airport utility also cannot detect my wireless network.
How do I fix this?

Kindle works just fine on my AirPort Extreme.
You do not have an apostrophe or other type of thing like this in the name of your wireless network, do you?
Is the name of your wireless network a single word or phrase comprised of letters and/or numbers with no spaces?

Use WRE54G with WRT160N

I have WRT160N, v1.02.2. Still have weak zones, need range entender or additional access point. Can I use the WRE54G? Is there a better option

Well the Range Expander doesn't work with the N-router.Its not compatible.Would suggest you to get the G-series router in order to make the Range Expander work.

HT201394 cannot use bluetooth with my new nissan altima since I updated to 8.0.2. I am very disappointed is there a fix for this?

A Month ago I purchased a new Altima and I was able to connect with my iPhone to the car and take and answer calls. Since the update I can no longer use my bluetooth to answer, make or hear calls on my car.
My car also uses Nissan connect. I was able to use it just fine with the previous iphone OS versions. My husband has the same iPhone that I have and it works perfectly on the car. He hasn't upgraded it to 8.01 nor 8.02. He is on version 7.1.2
I hope Apple can address this. Or maybe there is a way to undo the updates and go back to 7.1.2 on my phone. We both have iphones 4s 32 gb. I will address this with Nissan as well and its syste on the altima (2014 nissan connect).
Has anyone else encountered this problem and found a solution. I tried restarting the car and the phones. I tried erasing the phone from the car and re-installing it.
Well if anyone gets a solution, please let me know. Thanks to anyone who takes the time to read this.
Josie

If you can’t use a Bluetooth accessory or car kit

Cannot use subpages with WRT160n

Similar Messages

Maybe you are looking for