Cannot use System Pref's/Network -- dialog box won't go stay gone

G5 running Tiger, browsers, Mail and other internet functions (DSL, PPPoE) work fine BUT: if I boot the Network app in System Pref's, it shows a dialog box that says "Your network settings have been changed by another application." If I press OK the box goes away for a second and then returns -- there is no way to proceed, or use this app -- the only thing I can do is for Systems Pref's to quit. In other words, it won't take OK for an answer!
Some notes: 1) Network diagnostics from the Help menu says everything is normal. 2) I did move my Ethernet connection to another computer to run that one -- this Mac was off at the time. I did not change any modem or router settings, and this Mac, as I said, works fine except for the above problem. 3) an app called "Internet Connect" in the apps folder will not boot (don't know what this is); 4) the utilities Netinfo Mgr and Network Utility don't tell my anything useful or at least that I can understand. How do I reset the SystemPref's/Network app or whatever it is so I can use it? Thanks.

Hi,
Check out this thread: file:///Users/carolynssamit/Desktop/Mac%20Troubleshooting/Your%20network%20setti ngs%20have%20been%20changed...%20%20fix.webarchive
And here: http://forums.macrumors.com/showthread.php?referrerid=59552&t=592305
And more here; http://forums.macworld.com/message/666874
Carolyn

Similar Messages

  • Getting 'Password Needed - Network' dialog box

    I have a site on IIS 5.0 that is using Basic and integrated NT authentication. The site contains a page that loads an applet. Prior to upgrading to JVM 1.4.1 everything worked fine - a NT login box would pop up on connecting to the site - after a successful login the page and applet would load. After the upgrade, when the page with the applet loads I am presented with a second login box - "Password Needed - Network".
    I've tried excluding the site address from the proxy server using both the IE settings and the JVM settings, but no luck. Any ideas?
    Thanks!

    Hi, this is what I did and how it looks;
    After reading the posts I contacted NetAway, (they are a roaming pay as you go ISP, you can use local dial-up numbers world wide), they told me to type my user ID with the addition of @netaway.com. It isn't an email address although I can see why you ask. The ID with password accesses the Netaway website to check your available minutes and to buy more.
    In the Network Dialog Box (under System Preferences) the password still shows 24 dots/characters, my Netaway password is only 8, I only entered the 8 characters but after pressing 'apply' the password field changed from 8 to 24 characters?
    The Internet Connect dialog box (was automatically filled) shows 10 characters?
    After pressing 'Connect' despite the password fields (see above) both looking wrong I'm able to dial-up, authenticate account and successfully connect!
    I can see this seems illogical, as a new mac user I sometimes struggle to understand how certain areas of OSX work!
    Please feel free to ask if this is unclear.
    MacBook Pro 2GHz Intel Core Duo 1GB 667 MHz   Mac OS X (10.4.8)  

  • I would like to use the windows explorer open dialog box instead of the adobe open dialog box. How can I change that?

    I would like to use the windows explorer open dialog box instead of the adobe open dialog box. How can I change that?

    The top screenshot is the Windows Open dialog box. All File > Open... commands in all Windows programs bring it up.   Try File > Open in Notepad for example.
    It belongs to Windows not Adobe. You cannot change this because there is no such thing as an Adobe Open dialog box.
    The bottom screenshot is Windows Explorer. It is Windows' OS File Browser, not an Open dialog.  It is not called up by Photoshop or any Windows program.
    You have to click on "My Computer" or a Folder icon to get to it. You can double-click a psd, jpeg or other image file in the Explorer window so that it opens in Photoshop.
    There is Adobe Bridge and Minibridge   Alt + Ctrl + O or File > Browse in Bridge

  • How do you use the Multiple Item Information dialog box ???

    How do you use the Multiple Item Information dialog box ???
    Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
    1. The way iTunes sorts tracks and albums
    2. The reason to select a leading check box
    3. Why there are Option selections (Yes /No) and leading check boxes.
    4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
    Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
    Thanks

    As Christopher says, it's a compilation. Different tracks are by different artists.
    Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
    Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
    That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
    If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
    Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
    Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
    tt2

  • How to use the Microsoft File Copy dialog box  in Java ??

    Can anyone tell me if it is possible to use the Microsoft File Copy dialog box (the one with the animated gif of the paper flying from one folder to anaother) in a Java.
    Many thanks

    And in any case, in any version of Windows that I've looked at, the file copy animation is an AVI, not a GIF.
    db

  • Cannot use system rollback segment for non-system tablespace 'TEMP

    Hi everyone!
    I encountered this error: "Cannot use system rollback segment for non-system tablespace 'TEMP"
    So this is what I did to check if the undo stuffs are online.
    SQL> select tablespace_name,status from dba_tablespaces;
    TABLESPACE_NAME                STATUS
    SYSTEM                         ONLINE
    UNDO                           ONLINE
    SYSAUX                         ONLINE
    TEMP                           ONLINE
    LARGEDATA                      ONLINE
    LARGEINDEXES                   ONLINE
    MEDIUMDATA                     ONLINE
    MEDIUMINDEXES                  ONLINE
    SMALLDATA                      ONLINE
    SMALLINDEXES                   ONLINE
    XSMALLDATA                     ONLINE
    TABLESPACE_NAME                STATUS
    XSMALLINDEXES                  ONLINE
    XXSMALLTABS                    ONLINE
    USERS                          ONLINE
    CONVTABLES                     ONLINE
    UNDO_02                        ONLINE
    16 rows selected.
    SQL>  SELECT tablespace_name, sum((bytes/1024)/1024) free FROM DBA_FREE_SPACE gr
    oup by tablespace_name;
    TABLESPACE_NAME                      FREE
    LARGEDATA                      18.3105469
    SMALLDATA                        10.46875
    SYSAUX                           106.5625
    UNDO_02                            67.125
    XXSMALLTABS                    13.0078125
    CONVTABLES                     170.039063
    MEDIUMDATA                             22
    USERS                           37.265625
    SYSTEM                             55.875
    LARGEINDEXES                   30.5175781
    XSMALLINDEXES                    17.34375
    TABLESPACE_NAME                      FREE
    UNDO                             546.9375
    MEDIUMINDEXES                       33.25
    SMALLINDEXES                    31.015625
    XSMALLDATA                     23.6328125
    15 rows selected.
    SQL> select file#,status from v$datafile;
         FILE# STATUS
             1 SYSTEM
             2 ONLINE
             3 ONLINE
             4 ONLINE
             5 ONLINE
             6 ONLINE
             7 ONLINE
             8 ONLINE
             9 ONLINE
            10 ONLINE
            11 ONLINE
         FILE# STATUS
            12 ONLINE
            13 ONLINE
            14 ONLINE
            15 ONLINE
    15 rows selected.
    SQL> select segment_name, tablespace_name, initial_extent,status
      2  from dba_rollback_segs;
    SEGMENT_NAME                   TABLESPACE_NAME                INITIAL_EXTENT
    STATUS
    SYSTEM                         SYSTEM                                 102400
    ONLINE
    _SYSSMU1$                      UNDO                                   131072
    OFFLINE
    _SYSSMU2$                      UNDO                                   131072
    OFFLINE
    SEGMENT_NAME                   TABLESPACE_NAME                INITIAL_EXTENT
    STATUS
    _SYSSMU3$                      UNDO                                   131072
    OFFLINE
    _SYSSMU4$                      UNDO                                   131072
    OFFLINE
    _SYSSMU5$                      UNDO                                   131072
    OFFLINE
    SEGMENT_NAME                   TABLESPACE_NAME                INITIAL_EXTENT
    STATUS
    _SYSSMU6$                      UNDO                                   131072
    OFFLINE
    _SYSSMU7$                      UNDO                                   131072
    OFFLINE
    _SYSSMU8$                      UNDO                                   131072
    OFFLINE
    SEGMENT_NAME                   TABLESPACE_NAME                INITIAL_EXTENT
    STATUS
    _SYSSMU9$                      UNDO                                   131072
    OFFLINE
    _SYSSMU10$                     UNDO                                   131072
    OFFLINE
    _SYSSMU11$                     UNDO_02                                131072
    OFFLINE
    SEGMENT_NAME                   TABLESPACE_NAME                INITIAL_EXTENT
    STATUS
    _SYSSMU12$                     UNDO_02                                131072
    OFFLINE
    _SYSSMU13$                     UNDO_02                                131072
    OFFLINE
    _SYSSMU14$                     UNDO_02                                131072
    OFFLINE
    SEGMENT_NAME                   TABLESPACE_NAME                INITIAL_EXTENT
    STATUS
    _SYSSMU15$                     UNDO_02                                131072
    OFFLINE
    _SYSSMU16$                     UNDO_02                                131072
    OFFLINE
    _SYSSMU17$                     UNDO_02                                131072
    OFFLINE
    SEGMENT_NAME                   TABLESPACE_NAME                INITIAL_EXTENT
    STATUS
    _SYSSMU18$                     UNDO_02                                131072
    OFFLINE
    _SYSSMU19$                     UNDO_02                                131072
    OFFLINE
    _SYSSMU20$                     UNDO_02                                131072
    OFFLINE
    SEGMENT_NAME                   TABLESPACE_NAME                INITIAL_EXTENT
    STATUS
    _SYSSMU21$                     UNDO_02                                131072
    OFFLINE
    22 rows selected.How should I be bringing them online?
    I tried this but didn't work for me.
    SQL> alter rollback segment _SYSSMU1$ online;
    alter rollback segment _SYSSMU1$ online
    ERROR at line 1:
    ORA-00911: invalid character
    SQL> alter rollback segment '_SYSSMU1$' online;
    alter rollback segment '_SYSSMU1$' online
    ERROR at line 1:
    ORA-02245: invalid ROLLBACK SEGMENT name
    SQL> alter rollback segment _SYSSMU21$ online;
    alter rollback segment _SYSSMU21$ online
    ERROR at line 1:
    ORA-00911: invalid character
    SQL> alter rollback segment SYSSMU21$ online;
    alter rollback segment SYSSMU21$ online
    ERROR at line 1:
    ORA-01534: rollback segment 'SYSSMU21$' doesn't exist
    SQL> alter rollback segment '_SYSSMU21$' online;
    alter rollback segment '_SYSSMU21$' online
    ERROR at line 1:
    ORA-02245: invalid ROLLBACK SEGMENT name
    SQL> alter rollback segment "_SYSSMU21$" online;
    alter rollback segment "_SYSSMU21$" online
    ERROR at line 1:
    ORA-30017: segment '_SYSSMU21$' is not supported in MANUAL Undo Management mode
    SQL> ALTER SYSTEM SET UNDO_MANAGEMENT=AUTO SCOPE=SPFILE;
    System altered.Should I be bringing every segment online separately? Please guide me.
    Nith
    Edited by: user645399 on Feb 23, 2011 2:52 PM

    SQL> select segment_name, tablespace_name, initial_extent,status
      2  from dba_rollback_segs;
    SEGMENT_NAME                   TABLESPACE_NAME                INITIAL_EXTENT
    STATUS
    SYSTEM                         SYSTEM                                 102400
    ONLINE
    _SYSSMU1$                      UNDO                                   131072
    ONLINE
    _SYSSMU2$                      UNDO                                   131072
    ONLINE
    SEGMENT_NAME                   TABLESPACE_NAME                INITIAL_EXTENT
    STATUS
    _SYSSMU3$                      UNDO                                   131072
    ONLINE
    _SYSSMU4$                      UNDO                                   131072
    ONLINE
    _SYSSMU5$                      UNDO                                   131072
    ONLINE
    SEGMENT_NAME                   TABLESPACE_NAME                INITIAL_EXTENT
    STATUS
    _SYSSMU6$                      UNDO                                   131072
    ONLINE
    _SYSSMU7$                      UNDO                                   131072
    ONLINE
    _SYSSMU8$                      UNDO                                   131072
    ONLINE
    SEGMENT_NAME                   TABLESPACE_NAME                INITIAL_EXTENT
    STATUS
    _SYSSMU9$                      UNDO                                   131072
    ONLINE
    _SYSSMU10$                     UNDO                                   131072
    ONLINE
    _SYSSMU11$                     UNDO_02                                131072
    OFFLINE
    SEGMENT_NAME                   TABLESPACE_NAME                INITIAL_EXTENT
    STATUS
    _SYSSMU12$                     UNDO_02                                131072
    OFFLINE
    _SYSSMU13$                     UNDO_02                                131072
    OFFLINE
    _SYSSMU14$                     UNDO_02                                131072
    OFFLINE
    SEGMENT_NAME                   TABLESPACE_NAME                INITIAL_EXTENT
    STATUS
    _SYSSMU15$                     UNDO_02                                131072
    OFFLINE
    _SYSSMU16$                     UNDO_02                                131072
    OFFLINE
    _SYSSMU17$                     UNDO_02                                131072
    OFFLINE
    SEGMENT_NAME                   TABLESPACE_NAME                INITIAL_EXTENT
    STATUS
    _SYSSMU18$                     UNDO_02                                131072
    OFFLINE
    _SYSSMU19$                     UNDO_02                                131072
    OFFLINE
    _SYSSMU20$                     UNDO_02                                131072
    OFFLINE
    SEGMENT_NAME                   TABLESPACE_NAME                INITIAL_EXTENT
    STATUS
    _SYSSMU21$                     UNDO_02                                131072
    OFFLINEStill undo_02's segments are offline.

  • Error:cannot use system rollback segment for non-system tablespace

    Hi,
    I have created a oracle database 10.2.0 on fedora 9 system. I have created a user and assigned the default tablespace SATYA and given the permissions. But when I create a table in the user I am getting the following error.
    Can anyone help me in rectifying this error.
    ORA-01552: cannot use system rollback segment for non-system tablespace 'SATYA'
    thankyou
    satya

    Undo management is either AUTO or Manual, no local
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/undo.htm#sthref1469
    Since you are using 10g, you are recommended to use Auto undo management
    If you still plan to use manual undo management, make sure you have other non-system rollback segment in place.

  • ORA-01552: cannot use system rollback segment for non-system tablespace

    i try to create a table in new schema test1 and got the following error. please help.
    SQL> create table employer1 as select * from a.employer;
    create table employer1 as select * from a.employer
    ERROR at line 1:
    ORA-01552: cannot use system rollback segment for non-system tablespace 'TEST1'

    Hi,
    This is an example:
    SQL>
    CREATE UNDO TABLESPACE "UNDOTMP"
    DATAFILE 'UNDOTMP.DBF01' SIZE 100M REUSE
    AUTOEXTEND ON NEXT 51200K MAXSIZE 15000M
    ALTER SYSTEM SET undo_tablespace=UNDOTMP SCOPE=BOTH;
    Regards
    David Duenas
    Edited by: David Duenas on Jul 4, 2009 7:33 PM

  • Cannot use system rollback segment for non-system tablespace

    I am getting the below error suddently
    ORA-01552: cannot use system rollback segment for non-system tablespace 'USERS'

    SQL> show parameter undo
    Version : Oracle 10g
    NAME TYPE VALUE
    undo_management string AUTO
    undo_retention integer 10800
    undo_tablespace string UNDO
    SQL>
    SQL> select distinct tablespace_name, status from dba_rollback_segs
    2 ;
    TABLESPACE_NAME STATUS
    SYSTEM ONLINE
    UNDO OFFLINE
    UNDO ONLINE

  • 7.3.4 to 8.1.7  ODMA ERROR : ORA-01552: CANNOT USE SYSTEM ROLLBACK

    Trying to upgrade an old 7.3.4 database running on Aix to 8.1.7 so I can get a compatible export file to allow me to take it to 10gR2.
    I have done some work to get the init.ora file configured with the proper values but the odma fails with the following error:
    drop table dual;
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01552: cannot use system rollback segment for non-system tablespace 'xxx'
    I have other rollback segments defined by my init.ora file and during a normal database startup they are online.
    When I run the 'odma' process it takes the database down and when it brings it up it only has the SYSTEM rollback segment online.
    I know this is an old configuration but anyone have any suggestions?
    I do have "audit_trail = none" in my init file.
    Update:
    Looks like to just do an exp/imp I don't need to worry about going through odma so I am just going to close this post.
    Edited by: user6445925 on 11-Apr-2013 15:23

    Looks like to just do an exp/imp I don't need to worry about going through odma so I am just going to close this post.

  • CS6 Photoshop: One newly-created PSD filewon't print because the print dialog box won't appear altho the file properties appear to be the same as other files that do print.

    CS6 Photoshop: One newly-created PSD file won't print because the print dialog box won't appear after selecting File > Print.  Then "Print" becomes grayed out. The file properties such as permissions, are the same as other PSD files that do print.  This file also cannot be converted to Adobe PDF, which is not offered as choice under "Save as", whereas other can be.  I've exited, reopened Photoshop, restarted computer, checked out other CS6 PSD files which do print, nothing changes.  The 52 MB file has been flattened. OS is Windows 7.  Thanks for any suggestions.

    Sounds like the printer driver is having some problems.
    Try holding the space bar down when you select Print (which makes the print dialog NOT load previously used settings).

  • Illustrator cc2014 open dialog box won't work yosemite

    I have a Macbook Pro Retina 2014 with a fresh install of Yosemite and Creative Cloud, after a while, when I used the open dialog box for 4 or 5 times to open documents, that dialog box won't work anymore, I have to quit and reopen the Illustrator application, the shortcut won't work either. Is anybody got that problem before?
    When I was on Mountain Lion, I never got this problem, I presume it's related to Yosemite.

    Gelouis,
    I believe it is a bug in CC2014, appearing when you have the Illustrator open/place dialogue set to column view and sort by date or sort by kind. You may change it to view by name or list view.
    https://forums.adobe.com/message/7145022#7145022
    https://forums.adobe.com/thread/1723170
    https://forums.adobe.com/message/7183002#7183002
    Or you may get it right by changing the sort to something else.

  • Print Dialog Box won't Open

    My husband has an Intel Mac Mini that has issues. He can't open the print dialog box from any application--Mail, Firefox, Quickbooks, Word, etc. He can't print anything at all because the dialog box won't open when selecting <file> and <print> or clicking the print icon if there is one in that application. I deleted the printers and reinstalled the drivers...nothing. I upgraded from OS 10.7 to 10.8...again nothing. I zapped the pram...still nothing. I've been using Macs for 15 years and this issue has got me stumped. Any suggestions?

    I was unable to find the SavedData file.  I am running Windows 7 and there seems to be two files there /Roaming/Adobe/InDesign and /Roaming/Adobe/AdobeInDesing5.5 and neither one has a clear file name "InDesign SavedData" for me to remove.  I think I found the "InDesign Debaults" under the /Roaming/Adobe/InDesign/version7.5/en_US/InDesignDefaults.  Is that one it?

  • I cannot use iCloud on Windows 7, as it won't recognize my apple ID when i try to sign in to icloud it i get error saying "you can't sign in because of a server error (please help some one)

    I cannot use iCloud on Windows 7, as it won't recognize my apple ID when i try to sign in to icloud it i get error saying "you can't sign in because of a server error (please help some one)

    Although your message isn't mentioned in the symptoms, let's try the following document with that one:
    Apple software on Windows: May see performance issues and blank iTunes Store

  • Select Imamge source dialog box won't show up, how to repair it?

    My CS4 is doing very strange now, a lot of function is missing, the Select Image Source dialog box won't show up, the blue bar on top of menu bar won't show. Seems a lot of functions are disabled, is there a way to bring it back to normal?

    If the Select Image Source dialog box doesn't appear, it sounds as though you have accidentally changed Dreamweaver Preferences.
    Open the Preferences panel from the Edit menu (Windows) or the Dreamweaver menu (Mac).
    Select the General category from the list on the left.
    Make sure the "Show dialog when inserting objects" check box is selected.
    If the blue bar on the top of a Spry menu doesn't display, in the View menu select the Visual Aids submenu, and make sure there is a check mark alongside Invisible Elements (clicking it toggles the option on and off).
    If other settings have gone wrong, it's a good idea to delete your personal configuration folder. There are instructions on how to find it in the link supplied by Jon in the previous post.

Maybe you are looking for

  • Cenavt on Hold Account - Capital Goods 50% Credit

    Hi Gurus, As per PO , Basic Duty is 800.00 + 2% Cess - 16.00 + 1% Secc - 8.00, but when I Post the Excise Duty, 50% Duty is correctly posted in respective G/L Account as 40084 , but the balance 50% credit in Cenvat on Hold A/c is showing value as onl

  • ARM Luminary TCP debug double precision numbers

    Hi, I'm working with Labview and a LM3S8962 Luminary evaluation board. I'm debugging with TCP port and when I use double precision float variables I see some like random numbers on my front panel indicators or on my probe points (i.e. 1.5664325e34...

  • I have downloaded a CD using itunes but how do i get it to play on sonos?

    I have downloaded a CD onto my IMac using ITunes but cannot get it to play on SONOS - any ideas how?

  • Menu exit for VA01/02/03

    How to find the menu exit for VA01/02/03 transactions? Thanks Tharani

  • Change email language

    I am working about customizing Oracle Collaboration Suite . I want to change email language in 2 dedicate mode : portlet & application , I have searched resource bundles for changing language and I have found two types of file, 1. 11 steps to install