Cannot use the card reader on my Equium A100

I've put my SD HC card into the reader, and ensured it's clicked in properly.
But nothing is happening. I recently reformatted my hard drive.
Can you please tell me which driver I need?
I've seen these on the toshiba downloads page and think they might be of help?
SD memory format, SD secure module, and also SD utilities.
I hope someone can help me, as I really need to get the info of this card!
Thanks.

Hi
I assume you use Win XP.
The Flash Media Driver from Texas Instruments is the driver for card reader controller.
Download it and install it!
PS: not all cards are supported and compatible so if an card will not work in the card reader then sometimes this doesnt mean that an card reader driver has not been installed
Anyway, in device manager the card reader should be recognized properly!

Similar Messages

I have 2 concerns, first my Canon 5d Mark II is not showing up when I try to download pictures. I have to use the card reader to do so. Then there is no file handling window available anywhere. Please help. Jim R.

I have 2 concerns, first my Canon 5D MarkII is not showing up in the input source when I download to lightroom. I have to use the card reader to do so. Then there is no File Handling Section listed anywhere. Please Help. Thanks Jim R.

You should find the forum for whatever prdouct your posting concerns and ask for help there.
Here is a link to a page that has links to all Adobe forums...
Forum links page:
https://forums.adobe.com/welcome

Satellite P300-18M - Is using the card reader for Vista Ready Boost OK?

Hi there,
I have a P300-18M, and, due to getting a new phone, have an 8GB Micro SD Card spare.
I have put this in the card reader, and I am currently using it for Ready Boost, even though I have 3GB of RAM, there is definately a performance boost...
However, does anyone know if this could endanger the card reader? (ie damage it in any way) from being used all the time?
Thanks
Jack

Hmm. I wonder about the 8GB Micro SD Card.
As far as I know and according to some details in the internet, the Satellite P300 supports the microSD (with adapter) card 512MB - 4GB.
Usually the notebooks card reader should not recognize bigger microSD cards than 4GB.
Nevertheless I doubt it could affect the card reader functionality in worst case the 8GB microSD card will not be recognized by card reader
Cheers

Cannot use thunderbolt card reader

I purchases the authentic authorized and over priced official Apple thunderbolt sd card reader. I am using it on IPad Air running IOS 8.1
I plug it in and get Cannot use Device Message USB Storage Devise Not supported
The sd card is FAT formated and has a DCIM directory which I read was required to make the card readable
(Although the same cards were readable on a IPAD 2 with the older non thunderbolt connector
Do I have to also but the SD card from apple to make it work??

hi. you'ne not talking about thunderbolt (Macs) but lighting connector (i know, it gets quite confusing)
"Do I have to also but the SD card from apple to make it work??" : Apple doesn't make SD cards, so no.
Contact Apple Support, these SD readers often have problems

I cannot use the Fingerprint reader to unlock my screen!

I just updated my S5 software from SM-G900V NCG to NE9 and now my screen will unlock only with PIN or Password. Before the update I could use my fingerprint. When I try to select Fingerprint that option is grayed out and informs me "Turned off by administrator, encryption policy or credential storage." How do I get the Fingerprint option back?

This was also a problem I had post update but I got it back. First do a complete recheck of your fingerprint settings? If you’re still grayed out next power down phone & remove the battery, SD card and SIM (handle SIM with care (don’t touch gold foil) for about two minutes. Re-install SIM, card & battery then power on phone. This should clear up files and return the print reader setting. If however it’s not working do the next step:
Go to settings then backup and reset, tap Reset settings and then tap reset settings at the bottom of the screen. You will not have a loss of your accounts or any apps but you will affect some of your personal preferences settings. You can reset then as before after the restart. It will remove the bad files in your system and this restored my print reader. Give the above a try...first.

Cannot use the recovery disc with my Satellite A100

I have Satellite Pro A100 Series, when I boot it up it tells me "Windows could not starte because the following file is missing or corrupt" \WINDOWS\SYSTEM32\CONFIG\SYSTEM
I have tried to reboot with the recovery disc in and pressed F12 for the boot menu, selected CD/DVD and nothing happens.
Any help or ideas would be great,.

Hi!
This is strange but if you have tested different disks on your notebook it seems that your CD/DVD drive is faulty and must be replaced.
How do you think about this?
If you have Windows Vista on your notebook you can use the HDD recovery function. Go in the advanced boot menu, select repair my computer and follow the screen instructions.
Anyway, I think you must replace the CD/DVD drive to solve the issue.
Bye

Equium A200-15i: I cannot use the touch pad - no response

I cannot use the touch pad in my equium A200-15i.
When I touch the pad, there is no response at all.
Please help me to solve it.
I have tried to uninstalled the program and reinstalled it, but problem still exists.

Hi
Did you check if the touchpad is enabled correctly???
Using the key combination FN+F9 you can disable and enable the touchpad functionality!
Please check this function if you have not disabled the touchpad accidentally!
Last but not least I would recommend checking the touchpad settings in the control panel mouse -> Advanced -> Advanced feature settings.
There you will find different options which can be configured to use all the available touchpad features.
Best regards

Is it possible to boot from the card reader?

With some linux versions out there, you can use liveCD to create a USB linux boot drive to 'dual' boot into linux without touching the internal harddrive.
The cardreader would be perfect for this as I have some 4 and 8 Gb SC cards, but using F12 at startup, there is never an option to use the card reader device to boot. Looked in the BIOS, but could not see an option to enable this.
Does anyone know of a way around this?
Thanks.
Waste.

No one responded to your post, strange. When I want to test , lets say, a Compact Flash that has WIndows 98 bootup files on it, and a usb config.sys driver, as the CF slot is from a 7 in 1 FDD and card reader, and I first disable any hard drive in my computer from boot order, etc, so that the bios will be forced to simply search. If there is the possibility of your system to boot up here, it will find the OS and use it. It will tell you if it can or not at this point. Every bios is different in what it will or will not use in the boot order or allow for a bootup device. And I have also read about same thing as you read in re to Live CD. Sorry I have not learned that method as yet. I could never get anything but older OS to boot up off USB thumbdrives, and the like, and hacking the new OS usb load up process is not someting I care to master. If you find a way to do what you desire, please let others know how it went.

Used my card reader to import images, now see "incompatible JPEG" on images in camera

I have a Canon Power Shot A720 and used the card reader to import photos into the organizer. Now when I go back to erase some images from the camera I see many, but not all, of my 'once' images blacked out with a grey/white box in the center & a yellow question mark. Under the box it says "incompatible JPEG". What does that mean? It's never happened to me before, but I usually import my images directly from the camera.

Hi,
I'm not sure I understand your question since it's been a while since I had
trouble. When I had the trouble I was downloading from my camera and
storing them in the Organizer. My problem came when I edited those images
and RENAMED them. I guess the organizer didn't recognize the renamed
photos? Those were the images which had the yellow check mark. I now use a
card reader only, and I store them in 'Pictures' instead of the PSE
organizer. I haven't had any more problems. I think the Organizer, when
used properly, would be the best choice.....I just couldn't figure it out!
Frankly, I just didn't understand the Organizer and was used to my own
method for storage. I think that's what messed me up. I had help from a
computer technician to retrieve those images, and I haven't had any problems
since.
As for deleting images, I only delete images from my camera by using the
delete on my camera. I never, never delete from my card/camera by using the
prompt from my computer, like "do you want to delete these images from your
camera?"
Good luck!
Donna
I don't if I helped you at all. You're welcome to write back or hope for a
really good explanation on the forum boards.

HT201209 I have scratched off my Itunes code and now cannot read 2 of the digits. Is there a way to get it using the Card#?

I have scratched off my Itunes code and now cannot read 2 of the digits. Is there a way to get it using the Card#?

If this page doesn't help then you will need to try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

I connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone.

i connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone. what should i do.?

First, you do not have a 3G if you could upgrade it to 6.1.3, because 4.2.1 is the last version that will work on the 3G. So you either have a 3GS or you somehow hacked the phone to install an incompatible version. You can check the model you have by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
Assuming you have a 3GS the most likely reason for your problem is you have a gray market phone that was hacked or jailbroken to unlock it. When you upgraded it you removed the hack, so the phone is now locked to its original carrier.

After 10.7.2.update cannot see SD card reader in usb drive. Used to appear on desktop and start iPhoto but now nothing happens. It is recognised by system profiler (usb hub), but cannot find it anywhere.

After 10.7.2. update cannot see SD card reader in usb drive. Used to appear on desktop and start iPhoto but now nothing happens. It is recognised by system profiler (usb hub), but cannot find it anywhere. Any ideas?

Zap the PRAM and Reset the SMC, then try again.

HT201209 I received a $25 dollar iTunes gift card from a friend of mine as a gift. She had already used the card. I have entered the card number several times but cannot get the card amount to transfer to my account. Is there a way that this can transf

I received a $25 dollar iTunes gift card from a friend of mine as a gift. She had used some of the card before she gave me which
did not bother me. However, I cannot transfer the funds from the card to my iTunes account. Is it possible that I cannot use this card,
or is there a way I still can use the funds on the card.
Thank You,
Geo

When an iTunes card is redeemed, the entire value of the card is placed on the iTunes account. It is a one time use thing. So, there is not a remaining balance on the card.

I have Photoshop Eleent 12 and use a Windows PC. I hae been using a Canon EOS 50D for several years, which uses a Compact Flash Card. I have always downloaded pictures by using a card reader wich I connect to my computer. I Go to the Organizer, click on

I have Photoshop Eleent 12 and use a Windows PC. I hae been using a Canon EOS 50D for several years, which uses a Compact Flash Card. I have always downloaded pictures by using a card reader wich I connect to my computer. I Go to the Organizer, click on "Import" and select "From camera or card reader". Once on the Photo Downloader, I select the pictures, chose the folder and click on "Get Media" and all the photos get downloaded. Today I folled the same procedure as always, but ZI'm gettig an error message that reads"Import Failed" followed by another message that reads "Nothing was imported. The file(s) or folder(s) selected to import did not contain any supported file types, or the files are already in this Catalog." I'm puzzled by this message and don't know what to do o get my photos. Any suggestions?

The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

Cannot use the card reader on my Equium A100

Similar Messages

Maybe you are looking for