"Cannot use the connection type ...."
Nokia 6233
Windows XP SP2
LaunchApplication.exe v 6.82.70.1
Bluetooth "i.Tech BlueCON U"
O2 Bluetooth Dongle Drivers
Using Bluetooth OK to download photos to PC, but no other function so far.
Trying Nokia PC Suite to perform various functions - failure in all cases, common message is "Cannot use the connection type. Check that the needed hardware, software and drivers are available".
No clues anywhere as to what is needed.
Bluetooth clearly works. Nokia PC Suite can't use it.
Totally stuck - wish to use PC connection to synchronise address books.
Help, please.
Hi,
I think that PC Suite is not support your Bluetooth driver. Here you can find what drivers are supported:
/discussions/board/message?board.id=connectivity&message.id=114
Anyway, if Microsoft's BT driver support your BT HW, you can try to that stack also...
So, if you want to try to use MS BT driver:
1. Go to Control Panel, System, Hardware and Device Manager.
2. Open Bluetooth Devices, select that device, click Action, Uninstall and OK.
3. Click Action and Scan for hardware changes.
(windows should automatic install MS BT driver)
Similar Messages
-
Nokia Connection Manager - Cannot use the connecti...
Can someone PLEASE try and help me
I have the following details:
Phone: Nokia C5;
Operating system: Microsoft Windows XP Service Pack 2
Nokia PC Suite: Version 7.1.60.0
I cannot use bluetooth & USB connection. When I try to select it in the Connection Manager I get an error message " Cannot use the connection type. Check that all the needed hardware, software and drivers are available. (Code: OpenMedia) ". I have tried to reinstall nokia pc suite but no result. The connection worked before. The PC Suite of my computer was upgraded and now the bluetooth & usb are not working any more.
Please Help Me
Attachments:
Nokia_Connection_4679E9820AC32C34D11CBCDBA8237BA5_5.jpg 20 KBCould you please try this?
I am not sure whether this will solve your problem but you could try this once.
1. Disconnect your phone from PC if connected.
2 .Open Control Panel and go to ‘Programs and Features’
3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
4. Click on the ‘Change’ button on top toolbar.
5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
6. Restart the computer if prompted.
7. Now connect your phone to the PC. Driver installation should complete and PC/Ovi suite (hopefully) should detect your mobile properly now.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You -
Cannot select the connection type on the Nokia PC ...
Operating System: MS Windows 7 (x64) Home Basic Service Pack 1
Mobile Phone: Nokia 5130 Xpress Music Edition (V.10.10) and Nokia E66
Connection type: USB Cable (CA-101) with Nokia PC Suite 7.1
Problem: I cannot select the connection type on the Nokia PC Suite after running the programme and connecting them
Description: It was connected only one device, and it found that I cannot select the type of connection; however, I can run well on the Mass Storage of the both devices. Now, I guess that the problem is capability of MS Windows in Home Basic Edition because Ovi Suite cannot work on the version (Nokia's website shows on the systematic requirement)
Thank you
Solved!
Go to Solution.Operating System: MS Windows 7 (x64) Home Premium
Mobile Phone: Nokia 5230
Connection type: USB Cable with Nokia PC Suite 7.1.60
Problem with the Nokia Connectivity Manager - no connections are listed and the reinstall error goes away after running repair for the Nokia Connectivity Cable Driver. Have tried the
PC Suite Cleaner
CC Cleaner
many PC Suite reinstallations after disabling anti-virus
On some installations, I would get an error "Service cannot be started" but when I cancel and restart the installation it goes straight through - I always end up with a blank window in the Connection Manager. Looked for some other issues found in older forums addressing older versions, nothing has worked yet. More help, please. -
Nokia connection manager: cannot use the connectio...
I'm using Nokia PC Suite 6.80.22 on a Fujitsu laptop (Windows Vista). This is the technical stack:
Operating system:
Microsoft Windows Vista
Build 6000
No service pack installed
Language: English (United States)
Language for non-Unicode programs: English (United States)
Locale: English (United States)
Input language: English (United States)
Nokia PC Suite:
Version 6.80.22
Language: English
Connectivity Cable Drivers:
Version 6.80.5.1
Bluetooth stacks:
Microsoft Bluetooth stack
Version 6.0.6000.16386
Toshiba Bluetooth stack
Version v5.00.07
I have problems while trying to connect to my phone via Bluetooth. It shows the following error: Cannot use the connection type.
In the PC Suite I go to Manage Conections and I see two bluetooth interfaces:
- Bluetooth(Microsoft) THIS IS ENABLED
- Bluetooth(Toshiba)
When I try to disable the Microsoft driver and enable the Toshiba driver it show the error: CANOT USE THE CONNECTION TYPE (CODE: OPENMEDIA)
Any ideas will be highly appretiated!I have exactly the same problem only my operating system is a bit different. I surfed through the net with no luck
This is my system's details:
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English (United States)
Language for non-Unicode programs: English (United States)
Locale: English (United Kingdom)
Input language: English (United Kingdom)
Nokia PC Suite:
Version 6.81.13.0
Language: English
Connectivity Cable Drivers:
Version 6.81.1.2
Microsoft Outlook:
Version 10.0
Build 2616
Bluetooth stack:
Microsoft Bluetooth stack
Version 5.1.2600.2180
Furthermore, my infrared connection and USB modem doesn't seem to be working. I have installed and re-installed the Nokia PC suite throughly. I dont know if my computer has something disabled or whether it's my phone (N95)
Any suggestion would be grately appreciated,
Do let me know if you found the solution to this prob.
Cheers,
Helpless -
The following error occurs.
Welcome to the Exchange Management Shell!
Full list of cmdlets: Get-Command
Only Exchange cmdlets: Get-ExCommand
Cmdlets that match a specific string: Help *<string>*
Get general help: Help
Get help for a cmdlet: Help <cmdlet name> or <cmdlet name> -?
Show quick reference guide: QuickRef
Exchange team blog: Get-ExBlog
Show full output for a command: <command> | Format-List
Tip of the day #0:
Did you know that the Identity parameter is a "positional parameter"? That means you can use:
Get-Mailbox "user" instead of: Get-Mailbox -Identity "user"
It's a neat usability shortcut!
VERBOSE: Connecting to mail1.dorothy.local.
New-PSSession : [mail1.dorothy.local] Connecting to remote server mail1.dorothy.local failed with the following error
message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from
the destination computer. The content type is absent or invalid. For more information, see the
about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : -2144108297,PSSessionOpenFailed
Exception calling "GetComputerSite" with "0" argument(s): "The Specified directory object cannot be found."
At C:\Program Files\Microsoft\Exchange Server\V15\bin\ConnectFunctions.ps1:164 char:2
+ $localSite=[System.DirectoryServices.ActiveDirectory.ActiveDirectorySite]::GetC ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : ActiveDirectoryObjectNotFoundException
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.: mail1.dorothy.local
VERBOSE: Connecting to mail1.dorothy.local.
New-PSSession : [mail1.dorothy.local] Connecting to remote server mail1.dorothy.local failed with the following error
message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from
the destination computer. The content type is absent or invalid. For more information, see the
about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : -2144108297,PSSessionOpenFailed
Randy CheekGood Morning,
Log into the server with an account that has appropriate Exchange rights, not a local account.
Note: By default - Domain Admins don't have Exchange rights.
Dame Luthas, ITILv3, MCSE Messaging 2013, MCSA, MCITP
My Technical Blog: http://thelifestrategist.wordpress.com
Discipline is the Difference between Goals and Accomplishments
If this post is useful, please hit the green arrow on the left & if this is the answer hit "mark as answer" -
The application requester cannot establish the connection.(Address in use:
Hello All,
I am using AS/400 type 4 Driver to connect and i am getting this error for every 1 hr if i restart the server again it will run till 1 hr and this error will come so pls help me
java.sql.SQLException: The application requester cannot establish the connection.(connect (code=10055))
[6/10/03 11:39:37:109 GMT+05:30] 3bf0d9b9 SystemErr R at com.ibm.as400.access.JDError.throwSQLException(JDError.java(Compiled Code))
[6/10/03 11:39:37:109 GMT+05:30] 3bf0d9b9 SystemErr R at com.ibm.as400.access.AS400JDBCConnection.setProperties(AS400JDBCConnection.java(Inlined Compiled Code))
[6/10/03 11:39:37:109 GMT+05:30] 3bf0d9b9 SystemErr R at com.ibm.as400.access.AS400JDBCDriver.prepareConnection(AS400JDBCDriver.java(Compiled Code))
[6/10/03 11:39:37:109 GMT+05:30] 3bf0d9b9 SystemErr R at com.ibm.as400.access.AS400JDBCDriver.initializeConnection(AS400JDBCDriver.java(Compiled Code))
[6/10/03 11:39:37:109 GMT+05:30] 3bf0d9b9 SystemErr R at com.ibm.as400.access.AS400JDBCDriver.connect(AS400JDBCDriver.java(Compiled Code))
[6/10/03 11:39:37:109 GMT+05:30] 3bf0d9b9 SystemErr R at java.sql.DriverManager.getConnection(DriverManager.java(Compiled Code))
[6/10/03 11:39:37:109 GMT+05:30] 3bf0d9b9 SystemErr R at java.sql.DriverManager.getConnection(DriverManager.java:194)I don't know much about connecting to an AS/400 but what it looks like is that you have a connection already established to the machine and are trying to connect another one on top of it. I would check to see if you have a process that is not properly closing its connection to that machine.
-
I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
I cannot use the bottom part of my touch screen. It would not respond to any of the touches I make. Is the screen broken or have I stuffed up my settings? I want to be able to type on my iPhone
Basics from the manual are restart, reset, restore from backup, restore as new. If you've been through ALL these steps and you still have the problem, you'll need to bring the phone to Apple.
-
i connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone. what should i do.?
First, you do not have a 3G if you could upgrade it to 6.1.3, because 4.2.1 is the last version that will work on the 3G. So you either have a 3GS or you somehow hacked the phone to install an incompatible version. You can check the model you have by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
Assuming you have a 3GS the most likely reason for your problem is you have a gray market phone that was hacked or jailbroken to unlock it. When you upgraded it you removed the hack, so the phone is now locked to its original carrier. -
I have CS 6 which requests I sign in to access my serial numbers, which I have already, and it fails to connect so that I cannot use the programs. How do I get past this, is there a direct line to customer support in the UK?
ThanksSign in, activation, or connection errors | CS5.5 and later
Mylenium -
When I connect SDHC card using iPad camera connection kit I am getting error message 'cannot read the connected storage media'
I know you have to have your pictures in a folder called DCIM on the card.
-
I cannot use the type tool in Photoshop CC it goes black. Why?
I cannot use the type tool in Photoshop CC it goes black. Why?
What goes black?
What OS version are you using?
And have you updated your video card drivers from the GPU maker's website? (bugs in video drivers being the most common cause of display issues) -
Cannot create a server using the selected type
Hi,
I'm trying to integrate tomcat 6.0 with Eclipse. But when I try to add Tomcatv6.0 Server,
it is sowing an error message " Cannot create a server using the selected type ".
Can anyone tell me why?
Thanks in advanceIn order to solve the problem you need to
* close eclipse
* go to ~/workspace/.metadata/.plugins/org.eclipse.core.runtime/.settings
* remove the files org.eclipse.wst.server.core.prefs and org.eclipse.jst.server.tomcat.core.prefs
* solve the problem with the permissions of the policy files or the personal instance of tomcat6
* start eclipse
In order to be able to use the tomcat6 server the proper solution is to have a personal instance of the tomcat6 server as described in the section "Advanced Configuration - Multiple Tomcat Instances" of the file RUNNING.txt (and the problems that have been reported about this ;-) )
My configuration: Debian/Sid, Eclipse 3.4.1. Ganymede
george -
i need help with the email on my mac. it says i cannot use the sever. any help would be awesome thank you
If you are trying to connect to your ISP e-mail account. The ISP will help you setup and connect to your e-mail account. So, you might want to give them a call.
Usually, when you are told that you can't use the server it means that there might be an error (either a wrong name/ address / password/ connection type/ etc.) so check your settings again...
Else you could try the following:
http://support.apple.com/kb/HT1277
http://www.switchingtomac.com/tutorials/how-to-check-your-hotmail-using-mailapp/ -
'You Are Not Using The Correct Type of Phone Cord' Error
Having a issue with my fax on my HP Officejet Pro 8500 wireless. Tried to send a fax, it received a send error. I ran fax test and it came back with "You are not using the correct type of phone cord". Nothing has changed since I last fax'd but I check the lines and connection, everything appears ok. Phone jack is connected to 1-line and Officejet '2-ext' is connected to the phone. I use a dedicated phone # and the Officejet is set to auto answer. I can call out and receive calls on the phone connect to the Officejet. My assumption is that since I can use the phone without issue there is nothing wrong with the phone line. Any ideas?
This question was solved.
View Solution.I was having the same problem. I'm using a the 2 wire phone cord provided with the printer and still getting this error. Turns out that it related to have a phone extension plugged into the printer. If I unplug the telephone form the extension jack on the back of the printer, then the fax test passes. I was even using a 2 wire cord on the phone extension but it seems that simply having a telephone plugged into the extension jack will cause this error.
Run the test without a telephone plugged into the printer's extension jack and you should be fine.
Worked for me!
Maybe you are looking for
-
Any way to avoid 'save as' dialog/pop-up when trying to save some file using flex?
I am trying to create an image file with flex and want to save it only in�� a perticular directory ie., user should not be given any option to choose the location.Air application uses resolvePath where we can specify the path but donno how this can b
-
Error during Document Check IN and Conversion to PDF from IBR
Hi All I am getting the following error when i trying to check in a document of 21 Mb Refinery Logs : The post converted queue for agent 'idc' states that Content ID 'SPECAPI5' converted but the converted primary webviewable file was not found. Excep
-
I need a more efficient method of transfering data from RT in a FP2010 to the host.
I am currently using LV6.1. My host program is currently using Datasocket to read and write data to and from a Field Point 2010 system. My controls and indicators are defined as datasockets. In FP I have an RT loop talking to a communication loop usi
-
CD will not eject. Seems stuck?
CD player has a CD injected in computer. We can not get the CD to eject. We have tried the "help" suggestions.
-
as of now, when I turn on my macbook pro, the screen remains black (as if it is of) and the release button light, lights up repeatedly. I tried to start it from the 10.6 snow leopard disc to no avail any other suggestions? it is covered by my apple p