Cannot use this phone reload 64 bit version loop

Hi _ Every time i connect my phone (i-phone4) to the laptop to connect with i-tunes
i get a message saying that i cannot use this phone as the correct software is not ;oaded and
i should uninstall and then install the 64 bit version
I do that and get the same message again ad infinitum _ can anyone help?

NI VISA is a software abstraction layer for different physical interfaces (e.g. RS232).
I understood that your application is working with this in order to select and communicate with COM interfaces.
MAX (Measurement & Automation Explorer) is the tool to configure and test NI drivers, in this case VISA.
So if no COM shows up in MAX, you have a malfunction (or missing) installation of VISA.
Norbert 
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Similar Messages

  • "You cannot use this version of the application Mail with this version...

    I recently needed to replace my hard drive and now when I try to open the Mail application I get the following message: "You cannot use this version of the application Mail with this version of Mac OS X."
    Any help is appreciated.

    ANSWERING MY OWN POST:
    I have tried reinstalling Mail from my Snow Leopard upgrade disk directly and tried it using Pacifist. Neither worked because both simply reinstalled version 4.0. Fortunately, I have a MacBook Pro and it has version 4.1. I copied this directly, which was not ideal (it was quite confused about my mailboxes), but it worked.
    The problem is that +Software Update+ did not detect the old version of Mail and Apple does not provide a direct way (that I could find) of downloading the latest version. Each time I downloaded Mail from Apple, it was version 4.0.

  • HT5925 I am trying to send data from my computer to my ipad, how do i do this if icloud says I cannot use it as I have multiple versions of outlook

    I am trying to send data from my computer to my ipad, how do i do this if icloud says I cannot use it as I have multiple versions of outlook

    Have you had more than one version of Outlook?

  • I connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone.

    i connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone. what should i do.?

    First, you do not have a 3G if you could upgrade it to 6.1.3, because 4.2.1 is the last version that will work on the 3G. So you either have a 3GS or you somehow hacked the phone to install an incompatible version. You can check the model you have by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
    Assuming you have a 3GS the most likely reason for your problem is you have a gray market phone that was hacked or jailbroken to unlock it. When you upgraded it you removed the hack, so the phone is now locked to its original carrier.

  • In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks

    In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks
    And please help me can type Laos font in it like andrio phone.

    Hi Cozumel,
    Thanks for posting. I'm sorry you're having problems with your bills. I can take a look at this for you. Drop me an email with your account details and a link to this thread for reference. You'll find the address in my profile.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • I cannot use this version of the application Adobe Air Installer with this version of Mac OS X.

    I have Mac OS 10.5.8 and every time I try to install Air Adobe 3 I get the message
    "You cannot use this version of the application Adobe Air Installer with this version of Mac OS X." 
    Could anyone help me? 
    Jai

    Hi,
    Adobe won't be developing for 10.5.8 new features (including new runtime) only security relates updates for existing runtimes (Flash 10.3.*/Air 2.7.*). Flash 11/Air 3.0 are only supported on 10.6.8.*/10.7.*, see:
    http://kb2.adobe.com/cps/916/cpsid_91694.html#main_system_requirements
    There is recent,  lengthy thread on forums with Adobe's employees statements on that subject (support/development for 10.5.* and newer) but I cannot find it quickly as basically forum search is broken/hard to do,
    regards,
    Peter

  • Cannot use this version of the application with this version of MAC OSX

    When I try to download the new beta, I get a message that says: cannot use this version of the application with this version of MAC OSX
    I'm new to Macs, but I installed all the software updates and that still didn't help. I dont have to buy a new operating system do I?

    Muse requires Mac OS X 10.6 or later.
    http://muse.adobe.com/tech-specs.html

  • You Cannot Use This Version of iMovie With This Version of Mac OS X

    +*Cannot Use This Version of iMovie With This Version of Mac OS X*+
    Yes, I can. iMovie just doesn't want to cooperate. I checked the requirements, it says:
    an Intel-based Mac, a Power Mac G5 with dual 2.0 GHz or faster processors, or an iMac G5 at 1.9 GHz or faster.
    Well, I meet the requirements, I have an iMac G5 with 2.0 GHz, also with Leopard.
    Why can't I use iMovie.
    Message was edited by: Qwedgeonline

    Oh, NVM I had to download the newest update!

  • You cannot use this version of the application iCa with this version of Mac OS x

    Bought a macbook pro from a friend- running 10.5.8. Could not find iCal in the Apps folder. Researched on line and it sounded like I needed to reinstall it from the disk. I did from the original os x disk and when I tried to open it, received the following message:
    you cannot use this version of the application iCa with this version of Mac OS x
    I have two disk for version 10.2. Neither disk offers "optional installs" but the second has "AdditionalApplications.pkg" but doen not install iCal at all. Any help would be greatly appreciated.

    Thanks. That brings up a whole new question- can I run 10.6 on my macbook? The specs are below:
    Model Name:
    MacBook Pro 15"
      Model Identifier:
    MacBookPro1,1
      Processor Name:
    Intel Core Duo
      Processor Speed:
    2 GHz
      Number Of Processors:
    1
      Total Number Of Cores:
    2
      L2 Cache:
    2 MB
      Memory:
    2 GB
    Was told at Apple Store that it would run terribly slow.

  • "You cannot use this version of the application Mail..."

    "You cannot use this version of the application Mail with this version of Mac OS X"
    I recently updated to 10.5.8 because my iTunes needed the new Safari and that needed 10.5.8
    After doing this, my mail no longer works and gives me the message above. What I don't understand is why is there an update that is required for one this but doesn't allow you to run another? Am I missing a Mail update to allow it to run on 10.5.8???
    I've already went through apple care and they walked me through running an Archival Install to get my computer back to its original settings, but that means I can't use Safari 4 and iTunes 9...
    Is there a way to have it all, Mail, 10.5.8, Safari 4 and iTunes 9? Please help, my mail is the only way I can check my work e-mail and it's not something I can just go without. Thank you

    Dummerkopf wrote:
    "You cannot use this version of the application Mail with this version of Mac OS X"
    I recently updated to 10.5.8 because my iTunes needed the new Safari and that needed 10.5.8
    After doing this, my mail no longer works and gives me the message above. What I don't understand is why is there an update that is required for one this but doesn't allow you to run another? Am I missing a Mail update to allow it to run on 10.5.8???
    I've already went through apple care and they walked me through running an Archival Install to get my computer back to its original settings, but that means I can't use Safari 4 and iTunes 9...
    Is there a way to have it all, Mail, 10.5.8, Safari 4 and iTunes 9? Please help, my mail is the only way I can check my work e-mail and it's not something I can just go without. Thank you
    See this thread from someone with a similar problem:
    http://discussions.apple.com/message.jspa?messageID=10327281
    Since you've restored your computer you won't be able to check the version number of your Mail application, but the question about moving Mail may still apply.

  • Safari version 5.0 message"Cannot use this version w/this version of Mac"?

    Just installed Mac OSX 10.5.8 update combo, restarted my computer and now when I try to open Safari I am getting the message "You cannot use this version of the application Safari with this version of Mac OSX." What gives? And I must say I am NOT very computer savy so please be specific if you know what I need to do Thanks

    Carolyn, thanks for being there, I have just kind of been messing around looking into different things, that's my way of learing all this computer stuff, and then actually realized that I had been trying to open an old version of my Safari and not my updated 5.0.
    I'm sure I will need you in the future so don't go any where LOL Thanks Deb

  • "YOU CANNOT USE THIS APPLICATION SAFARI WITH THIS VERSION OF MAC OS X"

    hi, just downloaded the update for mac 10.5.1 - all went well - then tried to open Safari and received this message "YOU CANNOT USE THIS APPLICATION SAFARI WITH THIS VERSION OF MAC OS X" - I have tried downloading Safari again through netscape but that does not seem to work either - ANY IDEAS???? Thanks

    It sounds likely that you have more than one copy of Safari on your hard drive. The one in your Applications folder is the one you should have. The one you're trying to launch is an older version that somehow got moved somewhere else, so that the new version got installed in your Applications folder (where it should be) while the old version is running (or trying to run) from another location.
    First, double-click on the Safari application file that you have in your Applications folder. Does it run properly, without error messages? If so, everything is fine. You just need to get rid of the old version of Safari and set it up so you can easily launch the new version that is in your Applications folder.
    Are you clicking on the Safari icon in your Dock when you see the error message? If so, do this: Control-click on the Safari icon in your Dock and select "Show in Finder" from the contextual menu. A Finder window should open showing the location of that copy of Safari. If that Finder window is any location other than the Applications folder, delete the Safari file that is in that folder. Then drag the Safari icon out of your Dock. Navigate to your Applications folder and drag the Safari file from the Applications folder to your Dock.
    You should be all set, but click on the new Safari icon in your Dock to make sure it is the correct version and runs without problems.
    Message was edited by: Rachel R

  • "You cannot use this application with this version of OS X"

    Hi,
    I'm getting this message when I try to open .AVI files that I uploaded from my digital camera, but I'm posting it here instead of in the Quicktime section because I believe that the cause of the problem is more general. When researching this problem, I looked at the info panel for these .AVI files, and the app listed to open them was "Quicktime Player (default) (7.1.3)". But the actual version of Quicktime that I have installed is version 7.4. If I set the file's "Open With" app to be "Quicktime 7.4", it opens fine, but the "Open With" app reverts back to "Quicktime Player (default) (7.1.3)", making the problem come back. I've also noticed that if I right-click on other apps (a PDF file, for example), and choose "Open With" from the popup menu, that I see other versions of apps that no longer exist on my machine (Safari 2.0.4, for example). I think that files associated with these older app versions may be the cause of many of the "You cannot use this application with this version of OS X" issues that have been reported here. My question is where is this list of "installed" products maintained in OS X, and is there a way that I can edit it to remove those product versions that no longer exist on my system. In my particular instance, I'd like to remove "Quicktime 7.1.3" which should allow me to set the associated app for my .AVI files to be Quicktime 7.4 with no possibility of the association reverting to an earlier version that's not only incompatible with Leopard, but also not installed on my system.
    Thanks,
    Ken

    When you associate a file with an application, are you then clicking the "Change All" button? You can rebuild the LaunchServices database. Evidently the location of the command and the database have changed slightly in Leopard from what they were in Tiger. See this thread for the updated instructions:
    http://discussions.apple.com/thread.jspa?messageID=5730491
    Also, make sure you don't have the old applications archived somewhere. I've been astonished in the past at just how enterprising the system can be in finding some program squirreled away in an obscure backup folder and listing it as an option to open something.
    Francine
    Francine
    Schwieder

  • You cannot use this version of the application Mail with this version OSX

    I just installed 10.5.8 (9L30) via Software Update and now my Mail doesn't work. Instead, I get a dialog box that says "You cannot use this version of the application Mail with this version of Mac OS X." When I run it out of Terminal from /Applications/Mail.app/Contents/MacOS/Mail it runs fine, even though it is Version 3.5 (which is what shows up when I do Get Info on the Mail application in the Applications folder). This is really poor, Apple. This is basic stuff -when you upgrade the OS you have to make sure all the Apps work. How are you going to fix this?

    Thomas A Reed wrote:
    Apple obviously are stupid enough to release an update that broke mail..
    Then how do you explain all the people saying they've had no problems with the update? (Oh, and "Apple are"???)
    Not everyone had the problem. Good for them. More than one person had the problem - and perhaps even more will experience it. That means there is a hole in the update process - i.e. something does not work properly in all situations. Apple is not God - they stuff up sometimes, innit? Stop defending them.
    No matter whether you use a Mac or Windows machine, you need to do some basic maintenance from time to time to keep things working smoothly. Macs, overall, tend to need less, but you still need to check the hard drive from time to time, and you definitely never want to install an OS update if there's a chance you've got hard drive problems.
    So if that's the case, why design an "automatic" Software Update utility that does not do a check of HD integrity if it is so vital to do such a check before installing an OS upgrade? Does that make any sense? Where do Apple recommend such a check prior to installing an OS upgrade? It's not immediately obvious do the average user. Apple have gone out of their way to make claims like "you never have to defrag a Mac". They don't mention anything about HD checks. If it's so fundamental, why not? Is it unreasonable to think that a company that prides itself on good design would think of this?
    Thank you for the link for the consolidated update. That fixed it - except that it should have worked first go from the auto updater.

  • You cannot use this version of the application Mail with this version of Ma

    My hardrive died so I got it replaced and since I bought my macbook on ebay I have no Installation discs so got a friend to install leopard - everything so far seems ok but when I click Mail this comes up -'You cannot use this version of the application Mail with this version of Mac OS X.'. Any ideas? Ive ran software update and its all up to scratch..

    Greetings,
    You seem to have a conflict somewhere, and it looks like you have a prior version of Mail that doesn't work with Leopard, along with the Leopard version of Mail. What version was on the Mac when you bought it, and where did the version of Leopard come from, exactly (was it a retail boxed version, or a version that shipped with another model of laptop)? Be very specific, as it does make a difference.

Maybe you are looking for

  • How can I just modify (from "Windows" version to "Mac") my purchased software?

    I've already purchased the Adobe Premiere Elements 13 in the wrong version: I need it for Mac and I've ordered the Windows version. How can I modify it? Thank you in advance, Jose Luís

  • Custom authentication issue

    Good Afternoon, I am trying to add some code to a custom authentication routine to allow for tracking in the APEX supplied logs. Currently the authentication code processes the Login attempt and either allows access or returns the user back to the lo

  • How to arrange songs on ipod shuffle the way I want them to be played

    I just got an Ipod shuffle in India.....2 GB....I want the songs to be played in a particular order only the way I can do on MP3 players....How do I arrange songs the way I want them to be played serially?

  • Motion Blur

    I have created a dvd (to be played on a TV) as I was viewing it a few of the clips had motion blur. What cause this? How do I fix this problem? Does it stem all the way back to how I imported it into Final cut express or exported it?

  • Workshop, ant, and ejb project

    I exported an ant build file from the workshop for an ejb project. I ran the build from the command line. I got the following exception: java.lang.NoClassDefFoundError: com/bea/ide/Application at com.bea.wls.build.DeleteModuleTask.execute(DeleteModul