Cannot use Toshiba Utilities after removing some dll files

After the use of malwarebyte's anti malware, i have somme dll lost (for ex : mscoreei.dll) and I can not use correctly toshiba utilities.
I have trired to reinstall some utilities I have found on the website, but it does not work better. I have reinstall Framework.net, with no more success.
Where can I fin this Dll or, better the collection of Utilities, to repair my computeur.
Rene

Generally speaking I agree with Paolo. It seems to be that everything is screwed up.
Best thing you can do now is to make clean OS installation and start to use notebook with factory settings again.
Optimize preinstalled OS, install Windows updates and you will have clean and perfectly configured OS.

Similar Messages

Qosmio X300 - This system cannot use Toshiba Accessibility

I've succeeded to install all Qosmio X300 drivers on Windows 7 64-bit. Everything's working fine exept this one: "Toshiba Accessibility". When I click on an "Access" key I receive this error message:
"This system cannot use Toshiba Accessibility"
Why do I receive this and what is this function?

Yes, I have installed Toshiba Value Added Package and reinstalled it different times. Furthermore if this Pachage wouldn't be installed, there would no be any "FN Access" key to click on!
Just when I click this button I receive this strange message! I'm running Windows 7 64-bit. Even FN key itself stopped working. Won't show it's FN functions on display.
Even after reinstallation of Value Added Package I receive the error message and FN doesn't work!
Did someone encounter this kind of problem? I don't know what's going on, how to solve this?

Cannot use PhotoShop CS6 after trial expired, even after purchasing Creative Cloud Student Edition

Hi.
I had PhotoShop CS6 trial, which expired.
I have purchased Creative Cloud student edition, I receive a message that my PhotoShop trial has expired.
I am prompted to purchase the product to extend it, or type in the product's serial number
(I never received a serial number.)
I paid for Creative Cloud and have an order number, I should not be having this issue.
I have uninstalled and reinstalled PhotoShop CS6 multiple times, I also use DreamWeaver and am fearful that I will encounter the same issue. How can I use the Photoshop CS6 after I have paid for it?
Curonda in Milwaukee, WI.

Hi.
The trial expired 2 weeks ago - Monday.
I purchased the Cloud Yesterday, also 2 weeks ago Monday 10/15/2012.
I purchased it twice thinking 1 purchase did not complete.
I still will need to request a refund for 1, I've been too busy between, work, school, and kid. I'm at work now.
Miss Curonda
...Remember, happiness is not a mood its a decision.
Date: Thu, 25 Oct 2012 05:59:51 -0600
From: [email protected]
To: [email protected]
Subject: Cannot use PhotoShop CS6 after trial expired, even after purchasing Creative Cloud Student Edition
Re: Cannot use PhotoShop CS6 after trial expired, even after purchasing Creative Cloud Student Edition created by Nikhil Bisne in Trial Download & Install FAQ - View the full discussion
Curonda,
Can you let us know the date when your trial expired and when you bought the Creative Cloud Subscription?
Thanks
Nikhil
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4799512#4799512
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4799512#4799512
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4799512#4799512. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Trial Download & Install FAQ by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Cannot use photoshop cs6 after trial expired, even after purchasing creative cloud

cannot use photoshop cs6 after trial expired, even after purchasing creative cloud

Hi Rshmaine,
please follow the steps provided on the link mentioned below and let us know if that resolved the issue or not .
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Kartikay Sharma

When using iPhoto can I remove some of the default options such as faces or flagged etc. There are more bits than I need for my basic use.

When using iPhoto can I remove some of the default options such as faces or flagged etc. from the left bar. There are more bits than I need for my basic use.

Hello Susan,
Not sure if I have fully understood your question but have you tried ...
iPhoto > iPhoto help > browse help > view and organise. Perhaps this touches on some of your needs.
Usually, best results for questions come from posting to the forum directly related to the question, in this case iPhoto. That tends to find the gurus
Would you like me to ask the hosts to relocate your question?

Cannot use face time after upgrating to ios 6 .password is not recognisible.pls help urgently

I cannot use face time after updating to IOS 6'password is not recognisible here nor to imessage pls help urgently

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

Cannot use the Send to Soundtrack Pro Audio File Command

I cannot use the Send to Soundtrack Pro Audio File Command, only the Multitrack and it's starting to really get on my nerves. It is unhiglighted. If I unlink the clip and select only half of the audio, the option re-appears. I have no idea what is wrong.

As an audio file, you can only send one clip at a time. This is a feature, not a bug. See the book for more information.
Russ

Cannot use internal microphone after upgrading Win 10 Home 64bit

After upgrading from Windows 7 Home Premium 64 bit to Windows 10 Home 64 bit on my laptop HP 1000 Notebook PC, Windows cannot hear the internal microphone, I think the mic signal is too small. I cannot use Cortana, Skype chat or Hangout. Windows says that the recording driver is still available and connected but there's no recording signal. I already uninstall and reinstall driver from Realtek and HP website but no effect. Also I used Windows Troubleshooting and HP Support Assistant but it is still not normal.Some one can help me to solve this problem. I really want to use all the function of Cortana.

Thank you very much for your attention! I checked the BIOS, my Production number: C9M71PA#UUF, HP 1000 Notebook. Also, when I tested with 1 external microphone (run normally with other computer), my latop can recognized the sound and I can use the Cortana, but I have to maximize the the Microphone Boost.I guess that windows driver lower the voice sound too much; because when I followed the instruction get started calibrating the microphone in the thread dv7t-7200: Microphone not compatible with Windows 10, it had improvement but not too much. Please help me to deal with this problem. Thank you again.

Cannot use Flash player after 10.2, have to keep reverting back to that version or earlier.

I am frustrated. I cannot use any flash versions later than Adobe® Flash® Player Installer/Uninstaller 10.2 r159 . If I update to version 11 or later I cannot watch any flash videos. The audio will play but the video freezes and pauses.
I have been trying to find a solution to this issue, versions 10.2 and earlier work fine but ever since the new flash was released and I have tried to update, I run into the same problem and have to revert back to 10.2 or earlier.
I thought maybe it might have been the video card but I had it replaced and same issue and I have two other notebooks with the same exact hardware but different OS and they are able to use Adobe 11 just fine.
The issue is also present when using Linux (Ubuntu).
My configuration.
Operating system:
Microsoft Windows XP Professional
and
Ubuntu
Processor:
Intel T9300 2.5Ghz
Video card:
Nvidia GeForce 8700M GT
Memory:
4GB
I would like if someone could help me with this issue. I am frustrated becasue sites are 'requiring / mandating' that I update to Adobe 11 but if I do so I cannot use part of the site, for example Facebook or Youtube.
Thanks in advance for any feedback....

That seems to have solved the problem.
Question though, why does turning the hardware acceleration off make the videos play better in high definition? I'm kinda baffled.
My video card driver is nv4_disp.dll , version 6.14.0012.6658, date 1/7/2011
I have tried many different Nvidia drivers trying to solve that issue and even had the video card replaced thinking it was the cause, but had the same problem with a new video card so thought I would try here.
Seems to work for me though now with the lastest version of flash but still I am confused why this is so.
Thank you for your help.

Won't boot from install discs after deleting some system files

I've been looking through the forum and haven't found an answer to my problem - maybe someone can help me out.
I have an aluminum Powerbook G4, 1.67, 1.5 RAM, 10.4.11. I was experiencing the problem with FCE capturing video for about 5 minutes and then freezing, and I read some threads here about how this can be fixed by returning to Quicktime 7.2 and installing it with Pacifist. I did this, but first tried to delete my previous Quicktime version files, and obviously I deleted some system files in the process. That's how my new problem started.
Programs now that do not open - Preview, iTunes, iMovie, FCE, Yahoo, Mail, and Microsoft Messenger. I no longer have my date/time/battery level/airport/bluetooth indicators in my toolbar. The Spotlight icon flashes, but will not open. Also, when opening the System Preferences pane, it opens just for a second or two and then crashes and closes. Safari, airport, and Word all work, though, and I still can access internet.
I tried to re-install OS 10.4 from my black install disc. The computer reads the disc, but after I click the installer icon and then "restart," the computer fails to completely reboot. The disc spins in the drive, I get the Apple, the indicator, and then the screen goes to blue and the disc soon stops spinning. Nothing happens after that. I've tried rebooting by holding down the C key but the same happens. When I hold down the option key, I get to the point where I can choose to boot from the install disc, and then the same thing happens - the blue screen and nothing more. Booting with the shift key held down doesn't work either.
I did just have a repair by Apple - my adaptor plug sparked when inserting it into the outlet, and I had to have the logic board replaced. But the computer seemed to be working fine when I got it back, except for the FCE issue first mentioned. Looks like my good intentions have done me in.
The install disc is about three years old, and is in good condition. It's been in the garage, so could heat or cold affect the readability of the disc?
Does anyone have any suggestions on how I can boot from my install disc and get a fresh install of my OS?

Hi bboross,
Tough without a Tiger Disk, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(space between fsck and -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: ** The volume (nameofvolume) appears to be OK  If fsck found issues and has altered, repaired, or fixed anything, it will display this message: *** FILE SYSTEM WAS MODIFIED ***   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.

Using call library function on a dll file created in an old version of labview

So I'm trying to update an old labview program to work in labview 2012. Everything converted over just fine but labview will always crashoverwrote some while using a library function in a DLL that was compiled using labview 8.5. Labview exits, stating that it vital memory area. It passes an array of data to the library call and an empty array for output. I thought I could get around this problem by changing my code to initialize the array being passed in so that it would be large enough to hold all the expected output. Now instead of overwritting areas of memory it shouldn't, I get a pop up message that says:
fatal internal error
memorymanager.cpp line 406
8.5.1.f5
So it appears because I don't have the ability to recompile the DLL file it runs off of the 8.5 runtime instead of the more recent one. Is there any thing I can do about this?

rjpierce wrote:
So I've been trying to figure out a way around this on my own while waiting on a response. From what I'm reading, a dll created in one version of the labview runtime can't be used by a different labview runtime. Am I correct in this? I feel like I must be mistaken since that's basically the opposite of how a dll should work. If nothing else works I have access to the original code for the DLL but it requires the control and simulation toolkit. I would like to avoid having to recompile the DLL since it was put in to a DLL to avoid the need for the toolkit to begin with.
Your problem most likely is that you try to pass native datatypes to the DLL function? That only can work if the caller and callee use the same LabVIEW runtime engine. Otherwise the memory block created in the memory manager of the caller will be accessed by the memory manager in the callee and bad things happen. Instead you should define the DLL function to use standard C datatypes (Pointer to C array) and also make sure to allocate the according buffer in the caller for all output array parameters.
An even more elegant way would be to completely abandon the DLL approach and call the according functions directly in LabVIEW. Then you won't have the problems about mismatched runtime engines. Passing C array pointers to a DLL is less performant than passing native datatypes, but if you use native datatypes you have to make sure the DLL is compiled in the same LabVIEW version as the one you call it from.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Removing some pages/files/archived blog entries with in a website

I noticed on my iDisk there are pages/files/old blog entries that I had removed from my iWeb (on my computer, saved and then published to .Mac). I am getting close to running out of room on my .Mac/iDisk account that is why I saw that there were old pages still on the iDisk/.Mac that I thought I had removed. How do I completely remove these pages/files/old blog entries I no longer need or want?

Hi Peter...
Not sure what is going on here... but I do notice a mistake in the RSS.xml feed URL. When you publish to folder in iWeb, be sure to enter in the domain name of our site. Now in your case, you are uploading to a subdirectory "iwebrats", so you need to include that as well. So in the URL field box in the Publish to Folder window, you should be entering: http://www.petermaher.com/iwebrats/ This will ensure that iWeb generates a valid RSS/podcast feed URL for your site.
Now on to your blog errors....it's behaving like you didn't upload the blog entry at all. When you do a publish to folder, iWeb will lay down two things inside this folder.... an index.html page and a folder (named after your site and containing a bunch of files associated with it). These are the two things that you should be uploading to your "iwebrats" subdirectory. You need to upload both items WITHOUT the enclosing folder. So when you look at your "iwebrats" subdirectory in your FTP program, you should see the index.html program and your sitefolder. Don't take anything out of the sitefolder...just upload it as is. Upload the two items as is, keeping the index.html file outside the site folder.
Go back and double check your uploading. Maybe re-FTP things. I think you will see that your site will work.

I have uninstalled and reinstalled the new iTunes but it still will not work. I keep getting the error mesage relating to MSVCR80.dll, the installation error 7 (windows error 126). I have tried moving and removing the dll files including the QTMovie dll

I have tried uninstalling and reinstalling iTunes 15 times regarding the latest release and still get the MSVCR80.dll and Error 7 (Windows error 126) messages.
I have tried moving the dll filesincluding the QTMovie dll file to now avail. Can anyone please help, as I am sure you all, like me, have thousnads of dollars and songs invested in this system and need a fix fast. Can anyone please help???

Dear avid iTunes users - I have cracked it!!!
The response from Apple/iTunes was extremely poor and did not solve the problem.
I have a look in msconfig and observed which applications/services were running - one of which was the 'Apple Application Support'
So ... I had a look at what was in this folder and found the APS Daemon.exe file causing all the trouble.
So ... I simply deleted the Apple folder found in C:\program files\common files\.
I did a restart and did not get the MSCVCR80.dll or Error 7 (windows 126) error messages.
I reinstalled the current version of iTunes (for the 16th time!)
Hey presto!!!
IT WORKED :-O Woooohooo!!!
So ... to all those smarty-pants boffin-brianiacs out there (apple/iTunes): this is how you do it!!!!!!!!!!
YOU DO NOT NEED TO UNINSTALL ALL THE APPLE/QUICKTIME OR RELATED PROGRAMS - JUST DELETE THE APPLE FOLDER IN THE C:\PROGRAM FILES DIRECTORY.
Nuff said.

N97 cannot use as modem after firmware upgrade

Hi, sorry if this is a repeat post but driven to distraction.
I use my N97 as a modem to connect to the internet from my laptop when I'm away from home. Since upgrading the firmware I cannot connect through 1 touch access or direct through dial up.
When attempting to connect through 1 touch I get as far as connecting device and then I get the message "Failed to connect device".
I have removed the modem through internet properties and reinstalled PC Suite (after using PC suite cleaner). I am running windows 7 but was connecting through 7 before the firmware upgrade.
Now I'm at a loss. Anyone got any ideas?

Saw another post here that said they make a completely new network with a different name and it worked. I decided to give it a try and it actually did work!!! Don't have any clue why but I don't really care since my network is running again.

Cannot use Office 04 after Lion

Hi All,
After I installed Lion last night, I could not use my Microsoft Office 2004 anymore. A message saying PowerPC no more supported. OMG, cannot open all my documents and excel files unless I transfer them to my PC. . Anyone has any suggestion what I should do ? Does anyone know if there will be an update by Apple to address this besides I need to upgrade my Office to latest version ? Thanks.

It may be a hidden Library folder issue. Close all open apps, Open the terminal app and type this:
chflags nohidden ~/Library
then press enter.
This will make your Library folder visible and may help.

Cannot use Toshiba Utilities after removing some dll files

Similar Messages

Maybe you are looking for