Cannot use Trim command in CS4

I am trying to use the Trim command in CS4 (I am using Vista 64-bit).   While I've used Photoshop for several years, I use it intermittently and am a complete novice.  I am trying to create an irregularly-shaped image (a map), and am trying to cut off the white areas around the map so that I can insert it into an Indesign document.   When I click Image-Trim, and click Bottom Right Pixel Color (which is a white area of the image), I then click the bottom right corner and NOTHING HAPPENS.   Sometimes, I get a message that I cannot do this because the "layer is locked," but there are no layers except the single background layer, and I have no clue about how to "unlock" this. 
Earlier, I had clicked Image-Trim and the crop-like boundaries appeared around the white areas, but I was not certain what to do after that.   I pressed Enter, but nothing happened.   I closed the image and placed it into Indesign, but the white areas still appear.
Is there a step by step description of how to do this?  It's obviously not doing what the Adobe Photoshop Help instructions say to do, which ends with "Select one or more areas of the image to trim away: Top, Bottom, Left, or Right" but doesn't say what to do after you've selected the area!!).
Thanks in advance!

To unlock the background layer, to make it a 'real layer', just double-click it in the layers palette.
Once you have done that, you can erase any part of the image to become transparent, then you place the PSD file into InDesign.

Similar Messages

  • Cannot use the command "warm-reload" on IOS 12.4T

    Hi,
    I would like to use the command "warm-reload" like the following documentations on the router 2611XM with IOS 12.4T.
    http://www.cisco.com/en/US/docs/ios/fundamentals/configuration/guide/warm_reload_ps6441_TSD_Products_Configuration_Guide_Chapter.html
    I thought it available, but actually at the consol which connected with the router, it did not exist.
    How can I use this command on the IOS 12.4T?
    Regards,
    Okumura

    Hi, Ganesh.H
    Thank you for your reply.
    My consol shows below.
    Router#show version
    Cisco IOS Software, C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.4(15)T7, RELEASE SOFTWARE (fc3)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2008 by Cisco Systems, Inc.
    Compiled Wed 13-Aug-08 16:09 by prod_rel_team
    ROM: ROMMON Emulation Microcode
    ROM: C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.4(15)T7, RELEASE SOFTWARE (fc3)
    Router uptime is 2 minutes
    System returned to ROM by unknown reload cause - suspect boot_data[BOOT_COUNT] 0x0, BOOT_COUNT 0, BOOTDATA 19
    System image file is "tftp://255.255.255.255/unknown"
    Router#conf t
    Enter configuration commands, one per line.  End with CNTL/Z.
    Router(config)#warm-reboot
                    ^
    % Invalid input detected at '^' marker.
    Router(config)#
    Regards,
    Okumura
    Hi Okumura,
    Yes you are right and i have also seen in the command lookup tool it also shows avalibale from 12.4 and T series,But when i am trying to fetch your ios i am unable to find the particular in feature navigator for particular ios to support this feature.
    C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.4(15)T7, RELEASE SOFTWARE (fc3)
    Ganesh.H

  • I cannot use this command. Why?

    [root@localhost ~]# man iostat
    No manual entry for iostat.
    [root@localhost ~]# iostat
    bash: iostat:command not found.
    [root@localhost ~]# xedit
    bash: xedit:command not find.
    Why can I not use these commands?
    How can I use these commands?

    Hi,
    "command not found" means that you didn't install the packages for this command. Please search the installation CD and install packages sysstat and xorg-x11 using command "rpm -ivh <packagename>-version.rpm"

  • Cannot use &SAP_EDIT command on SE16N on some tables

    Hi,
    this is probably something easy to explain for all the experts out there:
    I was asked by one of our developers the reason why he couldn't use the &SAP_EDIT command on some Z* tables.
    When I tried it for myself, I could see that in fact the command couldn't be used with the table he asked me about but I could use it with some other Z* tables. He then told me he could do it until last monday but not now...
    When comparing one table where I could use the &SAP_EDIT command with another where it wasn't possible, I couldn't find any differences on the table configurations.
    Now, I have a couple of questions about this:
    1. Where is this configured? What property should be changed so I can use the &SAP_EDIT command?
    2. Is there a way to find out who (or what) changed the system's behavior when using the &SAP_EDIT command on this table?
    Thanks,
    Antonio

    Hi Raymond,
    The note 1446530 in its version 5 doesn't solve the problem. There is an error in include LSE16NF10, form routine FILL_SAP_EDIT-
    *..this function is only allowed for special purposes
       if ld_on &lt;&gt; true.
          exit.
       endif.
    The data declaration of the variable ld_on is-
    data: ld_on(1)  value ' '.
    And definition of true is-
    constants: true(1)  value 'X'.
    It's obvious that such if check would always be true and hence, the subsequent code won't be executed. Effectively, the note does nothing.
    Instead, use t-code UASE16N and type in &SAP_EDIT, if data editing is needed. It works without the note.
    Nevertheless, it is enjoyable to read the language of note 1420281.
    -Abhijeet.

  • Cannot use &SAP_EDIT command on SE16N and UASE16N

    Hi,
    When I try to user transaction UASE16N, it says "Progam is obsolete. Use transaction SE16 instead".
    Also, i can`t use se16n.
    (Support Package "SAP_APPL 600" Level is 18)
    I can not implement the SAP Note 1446530, because it has a sysntax error.
    Any new note to be applied to solve this issue??
    Best Regards.

    I can't implement SAP Notes 1473881.
    Because, i have already imported Support Package "SAPK-60018INFINBASIS".
    So, SAP Notes 1473881 is invalid .
    thanks..

  • Cannot use quota command on NFS shares

    When I am logged into a host other than where the my users directories reside, the quota -v command does not display any information.
    Does the file systems need to be mounted differently? I know the mounts are definitely including the rq mount option.
    Thanks for the help,
    -Todd

    look into rquotad/rquota. it may be disabled (svcs nfs/rquota) or commented out in /etc/inetd.conf

  • Trim Command CS4

    My trim command will not work in CS4, both 64 bit and 32 bit. I use the measure (ruler) tool to straighten the horizon which leaves a white border. I'm unable to trim off the white excess. I do choose an appropriate white corner. Any ideas?
    Thank you.

    Trimming  selecting white from a corner should leave the smallest image with no white pixels anywhere on the image border rectangle.  If you are using the measure tool to straighten image it is likely that non-white corner points of the image touch the bounding box (left, right, top, bottom of the image rectangle boundaries), so it is not possible to trim to a smaller rectangle without cropping some non-white image pixels.  You would in this instance see white wedges at the sides, not white all the way around the straightened image.
    A way to test this:  After using the ruler tool to straighten your image, go to Image > Canvas Size and increase the canvas size by some amount. and select Canvas extension color  to be white.  Now try trim from a corner and see what happens.

  • 4507R+E with "k9" type IOS cannot use "crypto key generate rsa" command

    Hi all,
    We just upgraded the IOS on our SUP7L-E supervisor in a 4507R+E from a non-k9 (crypto) image to a k9 (crypto) image so we could use SSH to manage it. The specific image we are using is: cat4500e-universalk9.SPA.03.04.04.SG.151-2.SG4.bin. We also have a pair of 2960CG-8TS-L's that are running on: c2960c405ex-universalk9-mz.152-2.E.bin. We have given the devices new hostnames and specified a domain according to instructions.
    Our problem seems to be that we cannot use the "crypto key generate rsa" command to generate the keys we need to use SSH. We use this command all the time on our other 2960 and 4510 switches with no problems. We can issue other "crypto" commands but just cant generate the keys. Has anyone else experienced/fixed this problem? <!--break-->

    Switch#crypto key generate rsa modulus ?
    <360-4096> size of the key modulus [360-4096]
    I am running IOS version 3.5.3E and I can regenerate the key using the command "crypto key generate rsa modulus" command.

  • Cannot use the Send to Soundtrack Pro Audio File Command

    I cannot use the Send to Soundtrack Pro Audio File Command, only the Multitrack and it's starting to really get on my nerves. It is unhiglighted. If I unlink the clip and select only half of the audio, the option re-appears. I have no idea what is wrong.

    As an audio file, you can only send one clip at a time. This is a feature, not a bug. See the book for more information.
    Russ

  • The selected objects cannot be joined as they are invalid objects,( Compound paths, closed paths, Text Objects, Graphs, Live Paint group). You can use Join command to connect two or more paths, paths in groups; ot to close an open path.

    Hi I was trying to join two Ractangle Tool objects but getting this type of Error in illustrator cs6 :-
    The selected objects cannot be joined as they are invalid objects,( Compound paths, closed paths, Text Objects, Graphs, Live Paint group).
    You can use Join command to connect two or more paths, paths in groups; ot to close an open path.
    Please assist me asap.

    Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
    This sound like a firewall issue. I would start by disabling the firewall and seeing if you can connect. If this works then you know where the problem is,
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Cannot duplicate using option + command + arrow keys.

    Hi,
    I have a new iMac running on 10.6.3.
    I just switched from Illustrator 10 to Illustrator CS3, and I'm a bit exasperated. One of the things that is drving me nuts is that I can't duplicate objects using option + command + arrow keys anymore.
    Why?
    Thanks!
    Chris.

    krisserz,
    Actually, yes, a lot of things are similar on MACs, but for example, on this page: http://www.bugge.com/Family-and-friends/Illy/illy.html it says to find the folder Adobe Illustrator [X] Settings and there is none on my computer.
    The Move the folder hint says:
    Up to version 10, the name of the folder is Adobe Illustrator [X],
    From version CS on, the name of the folder is Adobe Illustrator [X] Settings.
    [X] is the version number; up to 10, it is just a number, and above that the Creative Suite version number, CS, CS2, CS3, CS4, and so on, is used (the corresponding standalone versions still have simple numbers, CS is called 11, CS2 is called 12, CS3 is called 13, and CS4 is called 14, but the version numbers with CS are used in the folder name).
    So in your case it would be Adobe Illustrator CS3 Settings.
    It may be worth going through all the Other options and try whichever may be relevant (Entorurage is mentioned under 7, along with quite a few others).
    One of the less nice options is to reinstall, in which case the Clean Script should be used. http://www.adobe.com/support/contact/cs3clean.html

  • Adding Server to cluster will make server halt (weblogic) & cannot shutdown the server by using script command

              Hi,
              When I Adding a server from the server list to the cluster , and
              click 'apply' , the weblogic server will be halted. Why could it
              happen and How can I solve this problem?
              Furthermore,I try to shutdown the server by using the command script
              - java weblogic.Admin -url http://localhost:port SHUTDOWN -username
              username -password password ( e.g. java weblogic.Admin -url http://999.99.99.99:7001
              SHUTDOWN -username system -password weblogic ), there is an error
              message "Exception in thread 'main' java.land.NoclassDefFoundError:
              weblogic/Admin" . Why?
              Chris
              

              Your CLASSPATH must include $WL_HOME/classes to startup as:
              java weblogic.Admin t3://localhost:<port> SHUTDOWN <USERNAME> <PASSWORD>
              Note here protocol is t3. Brian
              "Joe E. Schwarz" <[email protected]> wrote:
              >
              >Chris,
              >You gave probably forgotten to set your CLASSPATH to,
              >for example
              >on NT, C:\bea\wlserver6.0\lib\weblogic.jar.
              >Joe
              >
              >"Chris" <[email protected]> wrote:
              >>
              >>Hi,
              >>When I Adding a server from the server list to the cluster
              >>, and
              >>click 'apply' , the weblogic server will be halted. Why
              >>could it
              >>happen and How can I solve this problem?
              >>Furthermore,I try to shutdown the server by using the
              >>command script
              >>- java weblogic.Admin -url http://localhost:port SHUTDOWN
              >>-username
              >>username -password password ( e.g. java weblogic.Admin
              >>-url http://999.99.99.99:7001
              >>SHUTDOWN -username system -password weblogic ), there
              >>is an error
              >>message "Exception in thread 'main' java.land.NoclassDefFoundError:
              >>weblogic/Admin" . Why?
              >>
              >>
              >>Chris
              >
              

  • Cannot read instrument errors for Ando AQ6317B using GPIB commands.

    Maybe related to reading the status byte using GPIB commands for the AQ6317B OSA: how can I read the instrument errors, if one or more occur? Several instruments return their instrument errors in the format <errorCode>, <"error message"> as a response to the command "YST:ERR?" or similar. Not the AQ6317B optical spectrum analyzer.
    Can anyone help me with this one?
    Thanks in advance,
    Cristian

    Yes, I did this using NI MAX also and using NI IO Trace (former NISpy). Many instruments accept "SYST:ERR?" as a query to return any INSTRUMENT ERROR (hardware or firmware).
    Well, I guess my ANDO does not. it responds with an empty string, or whatever it has in its buffer from the previous query.
    In any case, be it as it may, I will close this issue (still in limbo for me), and just ignore instrument errors for the time being.
    Thank you for your answers, though.
    Cristian

  • Dreamwever CS5 ERROR server behavior panel cannot determine wheter "command" or "recordset (Query)"

    i get this error whenever i open pages created in CS4. ive tried deleting the cache file... deleting the entire configuration folder and letting DW re build it.. nothing... error still there. how can i turn it off? i also cant seem to find the "edit server behaviors" button.. double click? well DW freaks out with that aswell... yes i know i have some insanely hand edited code.. basically use DW as notepad replacement.. with extra features like having the option of "add recordset" then going and editing it to my liking.
    the error
    [quote]
    The server behavior panel cannot determine whether "command" or "recordset (Query)" is applied to your page. Please select edit Server Behaviors and change one of the two behaviors to ensure that each is uniquely identifiable.
    [/quote]
    this is a total show stopper for me.. im going to have to go back to a previous version cant click "ok" every time i open a page.. and every time i follow a include file.
    development ASP
    Dreamweaver CS5
    Question.. how to disable the error message from popping up? i'll take my chances with hand editing the recordset / command by hand if i need it changed.

    this is bleh... having to resort back to CS4..
    is there any way to legaly go back to cs4 dreamweaver but still use the other cs5 applications?

  • Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.

    Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.
    First my organize has Exchange on 2 site like
    site A (internet facing) : 2CAS 2 MB all are Services pack1
    site B (DR Site , no user active on this site) : 2CAS 2MB all are Services pack 1
    so today I upgrade Exchange 2013 from SP1 to CU5 start on "site B" and I found this issue and the details is....
    When I open EMS on any CU5 for query something (like get-mailboxdatabasecopystatus) the response return very slow and some query will not return at all (like get-owavirtualdirectory).
    But If I using EMS on SP1. Everything is ok then I try to use EMS on SP1 connect to CU5 and try to query something. the result is
    some query command cannot return for any result that are server on siteB (just some query command)
    Problem
    EMS on CU5 return very slow result.
    EMS on SP1 still ok.
    Does anyone face this problem before for CU5??? Please help me figure this out. Thank you
    reply from Social.technet

    Hi,
    Have you used the above cmdlets to check your Exchange server health?
    "all other command that I ran on EMS didn't logged on event viewer.", my environment is the same with you. I use Exchange 2013, only errors will be displayed in MSExchange Management. Actually, it is not related to slow EMS response.
    Hope it helps.
    Best regards,
    Amy Wang
    TechNet Community Support

Maybe you are looking for