Cannot use VS100 as DAW controler properly
Cakewalk sonar VS100 functions great as audio/Midi interface but cannot use all/most of the functions in the controler itself
Only the master and input volumes and the play/stop area work
Any help please with the configuration?
Google says that the VS100 needs a plugin for Logic in order ot work properly.
Get it here: http://www.roland.com/support/article/?q=downloads&p=VS-100&id=45116049
Similar Messages
-
Cannot use any buttons or controls when runnning program
When i run my program i cannot use any buttons (e.g. while loop stop,pause, ...) or any numeric controls.
Also i cannost scroll or use tab controls. But the program itself is running normally.. i can see normal results as before.
Problem is it used to work just well before. So i have no idea what happended or if i did something wrong ... but its not working anymore.
Any idea what might be the problem here?Petricek wrote:
When i run my program i cannot use any buttons (e.g. while loop stop,pause, ...) or any numeric controls.
Also i cannost scroll or use tab controls. But the program itself is running normally.. i can see normal results as before.
Problem is it used to work just well before. So i have no idea what happended or if i did something wrong ... but its not working anymore.
Any idea what might be the problem here?
I guess the doohickey is no longer connected to the whatchamacallit.
Your time would probably be better spent playing detective and trying to figure out what happened to make it get to that state. Does this VI read any sensors or equipment? Maybe the equipment is turned off, causing the VI to become non-responsive until the timeout (and you were just never patient enough for it to reach the timeout before aborting?) It's probably not a LabVIEW issue, but to be safe, check the dates on the files to make sure no one was futzing with it.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all. -
Cannot use AV settings in Quicktime Pro
Hi the AV controls are greyed-out. I can use the editing features, but cannot use the brightness etc controls that are so handy. In control panel, I open the quicktime icon, it shows the key entered with no error mesages. One of my PC's works, the one I am trying to replace it with, does not. Anybody?
The A/V Controls window is not available to all computers (Mac or PC).
They depend on the graphics card installed on them. -
I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?
Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen. -
Hello,
I have an AT&T iPhone 5 purchased from an AT&T store - it is a normal phone, no changes, no jailbreaking. I tried using my phone and my girlfriend’s iPhone 5 with the USB auxiliary cable in my 2012 Hyundai Accent. No matter what connector I use (headphone, USB, auxiliary) it doesn't charge or allow me to use the Hyundai’s controls to change music. Music will play through the Bluetooth system, but I cannot control the music unless I physically touch my iPhone. My iPhone 4 has a USB auxiliary cable and works perfectly; it charges and I have full control of my music without having to touch my phone. Nothing works even if I use the adapter that connects the iPhone 4 charger end to the iPhone 5. The picture below shows the iPhone 4 USB cable but it needs to have the (blue) iPhone 5 adapter.
Here’s the best part of this whole situation. I was told by Hyundai Customer Care that there is a specific USB cable available for my iPhone and that I need to contact a dealer. However, two Hyundai dealerships have told me that they do not have a cable, that Apple has not made a cable for the iPhone 5, and that I need to contact Apple directly or order it from an Apple store. It gets better. I contacted an Apple Store and they told me to contact Hyundai. I explained what I wrote above and they put on a call with Apple Customer Care. After 37 minutes on the phone with Apple, they still couldn't give me a satisfactory answer on how to get this cable or if they even had a cable (Case ID 505467409).
So here is the magical question: Is there a working adapter for the iPhone 5 that connect to a 2012 Hyundai Accent? It needs to play music, charge the phone, and work with the car’s controls. Thanks!
-samThe problem is that you're using an uncertified lightning to 30-pin connector (the blue cable). If you purchase the 30-pin to lightning cable (either online, at an Apple store or an authorized dealer) it should work fine.
I have a 2011 Tuscon and tried the lightning to USB cable that came with the phone - no dice. Talked to my local Hyundai dealer and they don't have an eta on the Hyundai lightning cables (I'm sure it's in the works).
Lightning to 30-Pin Adapter (0.2M)
Part Number: MD824ZM/A
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=48
$29 in the US store, $45 in Canada (yes, even though our dollar has been par for years) -
I cannot use a website I need to use, with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please advise. Also, my control panel locks up since Windows Explorer has pbms. Which is why I am using Firefox instead. Thanks for any help!
''I figured it was going to be FAFSA causing your problem.''
Install Portable Firefox 3.6.x to your hard drive for that one website. It won't affect your current Firefox installation at all. <br />
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 -
I could use Ipod Classic (30g) controls with connection to Highlander (adapter plug into JBL single CD player), but cannot with new 160g Ipod Classic. What gives?
Charge it up fully. Toggle the hold switch. Try getting into diagnostics mode again. See Corrupt iPod classic.
tt2 -
Nokia Connection Manager - Cannot use the connecti...
Can someone PLEASE try and help me
I have the following details:
Phone: Nokia C5;
Operating system: Microsoft Windows XP Service Pack 2
Nokia PC Suite: Version 7.1.60.0
I cannot use bluetooth & USB connection. When I try to select it in the Connection Manager I get an error message " Cannot use the connection type. Check that all the needed hardware, software and drivers are available. (Code: OpenMedia) ". I have tried to reinstall nokia pc suite but no result. The connection worked before. The PC Suite of my computer was upgraded and now the bluetooth & usb are not working any more.
Please Help Me
Attachments:
Nokia_Connection_4679E9820AC32C34D11CBCDBA8237BA5_5.jpg 20 KBCould you please try this?
I am not sure whether this will solve your problem but you could try this once.
1. Disconnect your phone from PC if connected.
2 .Open Control Panel and go to ‘Programs and Features’
3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
4. Click on the ‘Change’ button on top toolbar.
5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
6. Restart the computer if prompted.
7. Now connect your phone to the PC. Driver installation should complete and PC/Ovi suite (hopefully) should detect your mobile properly now.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You -
"YOU CANNOT USE THIS APPLICATION SAFARI WITH THIS VERSION OF MAC OS X"
hi, just downloaded the update for mac 10.5.1 - all went well - then tried to open Safari and received this message "YOU CANNOT USE THIS APPLICATION SAFARI WITH THIS VERSION OF MAC OS X" - I have tried downloading Safari again through netscape but that does not seem to work either - ANY IDEAS???? Thanks
It sounds likely that you have more than one copy of Safari on your hard drive. The one in your Applications folder is the one you should have. The one you're trying to launch is an older version that somehow got moved somewhere else, so that the new version got installed in your Applications folder (where it should be) while the old version is running (or trying to run) from another location.
First, double-click on the Safari application file that you have in your Applications folder. Does it run properly, without error messages? If so, everything is fine. You just need to get rid of the old version of Safari and set it up so you can easily launch the new version that is in your Applications folder.
Are you clicking on the Safari icon in your Dock when you see the error message? If so, do this: Control-click on the Safari icon in your Dock and select "Show in Finder" from the contextual menu. A Finder window should open showing the location of that copy of Safari. If that Finder window is any location other than the Applications folder, delete the Safari file that is in that folder. Then drag the Safari icon out of your Dock. Navigate to your Applications folder and drag the Safari file from the Applications folder to your Dock.
You should be all set, but click on the new Safari icon in your Dock to make sure it is the correct version and runs without problems.
Message was edited by: Rachel R -
Early 2009 MacBook Air. On startup no keyboard or mouse me to login. Neither is the USB working so I cannot use an external mouse or keyboard either. If I keep restarting the machine suddenly sometime I get mouse and keyboard control and I am able to login and work. After sometime though mouse and keyboard Control is lost again and the machine hangs.
Lately another problem has cropped up. Now the machine starts up and seems to work for longer time but I have no 0 key and USB everything else is fine.
What could be the issue1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own". -
why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloading lightroom cc (previously using lightroom 5)...am i backing up properly or not???
Open Pictures folder and move the files named lrcat-journal and lrcat.lock to Desktop.
Make sure that , they are not inside Pictures folder any more and try to open backup from Lighrtroom and check..
Any LRcat file with .lock extension , move it to Desktop. -
I am so disgusted with the new Iphone 5 and the speaker quality. I was using the speaker phone a few days ago, and it started to sound like I had poor signal and poor reception. I later discovered, it was the speaker itself. It has apparently burst.
I then got a notice of a software update specifically for the speaker phone - on Saturday, May 11, 2013. I downloaded the update, and it is still terrible. I cannot use the speaker phone nor use the speakers in any capacity.
To have paid this much for such a wonderfully technical piece of equipment - to find it cannot perform the simplest task of delivering quality speaker tones. It is inaudible.
I am not going to purchase another Iphone. Sadly, I have been an avid IPhone user since they first came out, and have always purchased the newest version. The Iphone 5 will be my last IPhone.
My daughter has the Galaxy 4S, and I am very impressed.
Sorry Apple, you have dropped the ball. A phone this advanced should be able to have the simplest of features work properly... any cell phone has good speaker phone capabilities...except for the Iphone 5.
Signed, a very disappointed Iphone 5 customer.This is a user to user help forum only so doubtful if anyone here is going to lose any sleep.
If you think android devices never have a hardware problem or failure, you are delusional.
Be sure to purchase an run antivirus on those android devices since you will need it. Android is the mobile equivalent of Windows in regards to security or severe lack thereof. -
When I tried to download the new version of firefox I get an error message that says "your computer must be restarted to complete an earlier upgrade" when I restart it says the same thing. I cannot use firefox at all at the moment. When I try to uninstall in the control panel, the same message pops up.
If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
Cannot use any programs in Win 8.1
Hey Guys.
I own an Asus Vivobook S200E and recently i have not been able to use it properly.
Due to permissions i cannot install, uninstall, or run mostly all .exe files even though i am the main admin of the machine. I can still use all windows programs, firefox, and my anti-virus software (COMODO) but apart form that i cannot use anything else.
Java apps still work so it is nothing to do with java. i have run a malware and virus scan and they have come up with nothing. I really need to have admin back can anyone else help?!?Hi,
This issue can also be caused by corrupted user profile, I recommend you enable built-in administrator account and logon with it to check he results:
How to enable or disable built-in elevated administrator account
http://www.eightforums.com/tutorials/9650-built-administrator-account-enable-disable-windows-8-a.html
If the issue doesn't persist under built-in admin account, I suggest you create a new admin account to replace current one.
Kate Li
TechNet Community Support -
I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)
Maybe you are looking for
-
How do I use a USB WiFi dongle with a MacBook?
I recently acquired a USB wifi dongle and downloaded the appropriate driver. When plugged into my MacBook it will connect to my Graphite Airport base station. I can even use Airport Admin Utility to change setting in the Graphite ABS with this USB do
-
Best Practice for Master Data Reporting
Dear SAP-Experts, We face a challenge at the moment and we are still trying to find the right approach to it: Business requirement is to analyze SAP Material-related Master Data with the BEx Analyzer (Master Data Reporting) Questions they want to ans
-
How to use webservices in blackberry 8800 device using jde4.2.1
Hi All, I develop mobile webservice applications in Java ME. Nowadays i am working on porting of an Application named "Newstouch". I am having problem in running it on JDE version 4.2.1. I successfully installed the JDE 4.2.1 with JDK 1.5. When I bui
-
so i downloaded the song "kiss kiss" by chris brown into my playlist and into my library on itunes. it shows up in my iPod but when i go to "Artists" it doesn't show the song. it shows it in all of the other sections though (songs, english song playl
-
Main monitor flashes blue over and over with 2nd monitor connected
My old 23" cinema display died, and I have a new 24" DGM 1920 x 1200 display with DVI input. I have a Thunderbolt to DVI male cable which connects from the iMac to the DGM display. It was working fine earlier, but when I woke up from sleep, the login