Cannot use Wi-Fi on my Satellite Pro L500D

Hi,
I have Toshiba Satellite Pro L500D-137 part NO PSLT7E-001004GR AND I CAN'T USE WIFI.
W7 Home Premium. Can you help me?
http://forums.toshiba.com/tshb/attachments/tshb/brd_network/14880/1/Device%20Manager.jpg
http://forums.toshiba.com/tshb/attachments/tshb/brd_network/14880/2/Laptop%20back.jpg
Better ,or toshiba cant show pictures ?

Hi
According notebook specification your notebk has Realtek 802.11bgn RTL8191SE WLAN card inside and it is confusing that this WLAN card is not listed under network adapters in device manager.
I presume you have german machine. Have you installed own OS on English using Microsoft installation disc.
Have you installed WLAN card driver?
Please do it. Latest driver you can find on Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/

Similar Messages

Cannot use WLAN connection with my Satellite Pro A100

Toshiba Satellite Pro A100-830
Netgear DG834G
Can not use wireless connection. While using "Config Free" to find wireless device the popup 'this connection is controlled by other software'. I do not know what it means and which software controls the connection. I have other laptop which is duly connected by wireless connection. I am ok with wired connection.
I do not know much about technicalities and thus seek help if any reader can.
Thanks
Kris

>Can not use wireless connection. While using "Config Free" to find wireless device the popup 'this connection is controlled by other software'
You should not use the ConfigFree for the Wlan configuration but either the own Vista configuration options or the WLan configuration tool like Intel ProSet Utility or Atheros Clint Utility. It depends on the WLan card what utility can be used.
Intel card -> Intel ProSet Utility; Atheros WLan card -> Atheros Clint Utility
I assume the message +this connection is controlled by other software+ appears because one of the options mentioned above controls the WLan.

Cannot use Standby option on my Satellite Pro P200

Hi
I have installed XP SP2 on my P200, but it can not go into standby, it says something about RAM parity check or something?
What can be wrong?
Standby in Vista works fine.
*Hardware malfunction*
*Call your hardware vendor for support*
*nmi: parity check / memory parity error*
*The system has halted*

An NMI error can be caused by a number of things.
Bad memory, did you install any memory modules recently?
Faulty hardware
Bad driver
Read this Microsoft KB for a solution:
http://support.microsoft.com/kb/315223
If the RAM passes, I would run recovery to rule out a software problem. If it still happens after that, take it to a repair center.

Cannot find all XP drivers for Satellite Pro P200-15W

Hello everybody.
I've just installed XP Professional and now i'm having problems with some drivers. The Notebook is a Satellite Pro P200 15W, and the drivers are:
Graphic Card (The product specification says it is an Ati Mobility Radeon HD2600, and i haven't found the driver)
Wireless Card (The two drivers in toshiba's download page do not work)
Audio Device on High Definition Audio Bus (I've installed the audio driver, but after this, appears this "new" device)
Also, it appears an unknown device and i have no idea about what it can be
I've been looking in a lot of pages and forums, and everithing i've tried has failed.
Can anybody help me?
Regards, and thank you

I've just installed all the drivers excepting 2. These drivers are:
1.- Autdio Device on High Definition Bus
2.- PCI Memory Controller
I have not found any driver for these devices.
Also, i have som problems with Toshiba Hotkey Utility and FN Key, cause hotkey utility is installed but dont works, and the FN Key only controls keys Esc, F1, F2, F3 and F4, but not F5 (Monitor device selction), F6 and F7 (Brightness control), F8 (Wireless on-off) and F9 (Touchpad On-Off)
Finally, i have a problem with toshiba Power saver. Being Administrator, when i try to open it from Control Panel it says that i have no rights to use toshiba power saver.
Anibody knows how to solve these problems?

Cannot use VGA output on my Satellite A100

I have Satellite A100 laptop and when I use the VGA output my monitor informs their is NO signal. I have checked my monitor and it does work.
What I would like to know since their is no signal output from my VGA does this also mean that the *S-Video* will not have any signal either?
I dont have a S-Video >> VGA adapter as present trying to save the cost of buying one if it does not work...

I really don't know what are you doing wrong?
Is your notebook connected with VGA cable or with some adapter to the VGA port on your notebook?
When monitor is connected please use FN+F5 key combination to switch between LCD display and connected monitor.
Does this work?

Cannot use BOTH HP 8600 wireless printer pro in office and home

I bought the same unit so I could interchange cartridges and parts as well as the ease of software, the home printer works fine wireless, but does not work at the office. The only way that it can be used is to plug in the ethernet cable and that defeats the reason that I bought it. Many are plugged in since this has an office with Mac and such that all feed into.

Hi UCRToledo,
Welcome to the HP support forums. I understand that the Officejet Pro 8600 you have in your office will not maintain a wireless connection.
I have included a trouble shooting document for when the printer doesn't maintain a wireless connection. It has a section dedicated to many common causes of why the printer would be unable to maintain a wireless connection. I have also included a link to your user guide. There is a section dedicated to wireless problems starting on page 138.
Printer Does Not Maintain Wireless Connection
Officejet Pro 8600 Series User Guide
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Cannot use Intel widi with my Satellite L50-A-11T

Hi,
I have a Satellite L50-A-11T and i've tried to use Intel widi with Windows 8.1 and doesn't work, it says that the system is not compatible.
With Windows 8 it was ok and worked fine, but in the instruccions for upgrading it said to remove Intel widi.
Why is that?
Thanks in advance.

You misunderstood this info.
Intel WiDi isnt supported in Win 8.1 on Toshiba notebooks BUT instead of Intel WiDi you can use Miracast.
But Intel WiDi is not Miracast.
Intel WiDi was developed by Intel.
Miracast is an standard supported by developed by WiFi Allianz and Intel is a part of this Allianz
Windows 8.1 as well as Android 4.2 support the Miracast standard.
But this does not mean that you can use it always you need the compatible hardware parts.
In case your TV would not support Miracast standard, you will not be able to use it

Cannot use HDMI port on my Satellite P855-108

Hi all,
I have a problem with my Toshiba Satellite P855-108.
When I connect the computer to a external monitor, this works perfectly with VGA but this does not work with HDMI (see error message here: [http://s4.postimg.org/5mzl8adnx/Erreur.jpg]).
I tested on 1 computer screen and 3 TV (with the certainty that the HDMI cable is ok).
One of these TV is a Toshiba TV with REGZA-Link.
Normally, the drivers are updated.
Thanks a lot for your help

Thank you for your feedback.
Hey ! I don't know how that is possible but *I just tried again now to answer your question and it works on my screen here !*
I will try on my TV this evening and I come back to you...
Maybe an automatic Windows update solved the problem...
Keep fingers crossed for the same result with my TV ;).

Cannot use created recovery discs for Satellite A350-134

Emm I really hope you can help me.
The Notebook said that you have to create the Recovery Disk by yourself and thats what I did ( on 2 Cds)
So i wanted to reinstall my Notebook and put in the first cd and booted from CD. So i came into the Menu.
Then after a while it asked me to put in the second CD and I did it. Then it said there was a error copying the last 2 files needed.
So now i cant create the Recovery Disk again because I already started the reinstalling. now i have a few questions
What can i do generally ? Because I really dont want to buy for 35 euros a new Recovery Disk :S
I thank everyone who helps me :D

If you want to have factory settings you must install recovery image from recovery disc.
If your discs dont work you must use original Toshiba recovery disc.
My opinion is that you should install Win7 32bit on this machine. I do it on friends A350 and it runs perfectly.

Cannot use touchpad on my new Satellite L500

brand new L500, downloaded a few programmes, all of a sudden, cant use the touchpad at all
i can use external mouse no prob
Thanks

Hi,
As said as***, check if it is enabled (FN+F9). if doesn't solve your issue, maybe you need to reinstall (touchpad drivers)

Cannot use Forms in Acrobat 9.3 Pro

It was working fine, then I had someone else working on the forms for a large PDF, they were almost finished, and then said they couldn't add fields anymore.
So they closed and saved it, then i started looking on my end and sure enough, we can no longer add fields in this PDF.
We also have a Spanish and German version of the PDF. But PDF's are working great and i can add and remove fields. So I know it's some setting in this PDF that's not letting me add fields anymore.
I try to select a Check box or anything else, i place it where i want it to go, and click on it, and then the box goes away. And after that i can click on what i want to add, but it's just cross hairs from there. If i close Acorbate and reopen it i get the box again (Check box, text, anything) and the moment you put it where you want it on the document it goes away and i see cross hair again.
Thanks for any help in advance!

Ah Citrix.
I know there are many issues running Acrobat in Citrix but am not familiar enough with it to help you out. Hopefully someone will be along to give you a hand soon.

Cannot use TV Out port on Satellite P300D-14E

Hallo,
I have got an P300D-14E running on a Win7 32bit system. I have installed also the latest graphics driver from your homepage.
It is completeley unpossible for me to get the s-video TV Out running. I don't think that there is anything wrong with the hardware either, because there is a picture shown on my TV while booting. After the welcome screen apeared it turns black. I tryed out every possibility in the drivers options. Also I tryed out the options in Windows 7. The Television is recognized and the symbol of it is shown either in the ATI and else in the windows options.
Of course I tried the F5 Bottom, too.
Do you have any experiances like I have with windows 7?
Thanks
Peter

Yes, the Notebook was delivered with Vista but windows 7 is full featured by toshiba. There was even a possibility for the owners of a later Model of the P300 to upgrade to win7 for a very low amout of money. I bought a ultimate Licence myself.
To my Problem. Yes, there are the little pictures while pressing the FN Bottom. They change depending to the connected devices. In case of a connected TV there is a possibility to switch to a single TV or a TV/Monitor mode. If I do so, nothing happens (to the TV)
If the TV would not start while booting, I simply would think that something is wrong with the connector and/or with the graphic adapter.
I would really be interested to know, whether other users have made the same expeariance only with windows7, and if it works with Vista.

Satellite Pro M70: Need original discs and Configfree says switch is off

1. I cannot find any original discs for my Sat.Pro M70 - any suggestions.
2. Configfree is installed and running but it keeps advising me that my wireless switch is turned off. It is clearly on.
Any suggestions please

Tobi is right. Original recovery CDs you can order by service partner in your country. If you need addresses you can find them under http://eu.computers.toshiba-europe.com ?Support & Downloads ?Find an Authorized service provider.
Issue with ConfigFree is very strange. Do you use right ConfigFree version for Satellite Pro M70?

What is the difference between Satellite Pro 4200 and 4300 series?

As mentioned in another thread, I have a SP4220XCDT that died on me.
I bought a mobo from ebay which was from a 4290, and today it arrived, but the problem was that it has a seemingly fixed CPU, which stands out much less from the board than the one on the 4220 board, and therefore does not connect with the cooling mechanism from my 4220.
At least something comes on when I start up now, but unfortunately it doesn't get past the Toshiba screen which tells you to press F2 for boot sequence.
Having also spent money on memory and a new cpu, I don't want to let this one go, and have seen a motherboard available suitable for a 4320/40/60 - anyone know if this will fit in with the rest of my 4220? It doesn't have a cpu so presumably will have the same mechanism as the 4220 mainboard.
I'm assuming that these might be compatible since I have managed to find a pdf of a service manual which covers both the 4200 and 4300, although unfortunately the first page is missing so I dont' know if that highlights any differences.
It's frustrating that there are no pdfs available for these older models, at least with specs on them, and it's very hard to find any info.
As usual, thanks for any help!

Hi
As far as I know both series uses the Intel Mobile Pentium III microprocessor with MMX?Technology.
I found out these details:
Satellite 4260 Series: Mobile Pentium III 450MHz
Satellite 4270 Series: Mobile Intel Celeron 500MHz
Satellite 4280 Series: Mobile Pentium III 500MHz
Satellite 4320 Series: Mobile Pentium III 600MHz featuring Intel SpeedStep Technology
Satellite 4340 Series: Mobile Pentium III 650MHz featuring Intel SpeedStep Technology
The notebooks measures should be also the same. So in my opinion it should be possible to use the same motherboard in Satellite Pro 4200 and 4300.

Cannot use WLAN card after upgrade to WXP SP3 on Satellite Pro 4600

Hello,
This is my configuration
Computer: Satellite Pro 4600 model ps460e 02hyt fr
Operating system: Windows XP SP3
Wireless lan mini pci card: pa3070u - 1mpc mpci3a-20
My problem:
The operating system has been upgraded from win 98se to windows XP SP3.
The wireless lan mini pci card do not works I attempt to download the good drivers but I have a big problem all the downloads drivers does not work. I dont know the name of these physical board.
Where can I find a solution for update these driver? Is it possible that the wireless lan mini pci card does not work with windows XP SP3?
Please I wait for your help
Thanks
[email protected]

I can imagine it will works with SP2 well. Can you test it please and post the result?

Cannot use Wi-Fi on my Satellite Pro L500D

Similar Messages

Maybe you are looking for