Cannot use wifi with my kindle touch
How can I connect my Kindle touch with my airport extreme? Although I am entering my correct password, it does not accept it.
Kindle works just fine on my AirPort Extreme.
You do not have an apostrophe or other type of thing like this in the name of your wireless network, do you?
Is the name of your wireless network a single word or phrase comprised of letters and/or numbers with no spaces?
Similar Messages
-
Do I have to pay money, when using WiFi with my IPod Touch at home?
When using WiFi at home witch my IPodTouch, will it cost money?
I have an internet flat rate.NO
-
i cannot sync music with my ipod touch 4th gen.when i click on sync,nothing happens and the audio capacity bar on itunes disappears.i'm using microsoft windows 8 consumer preview
You can only sync with one computer. I would backup to one computer and then restore from backup.
iOS: Back up and restore your iOS device with iCloud or iTunes -
Can I use my wireless house WiFi with a Kindle Fire or do I need to buy an internet service for it
Can I use my house WiFi with a Kindle Fire or do I need to buy a WiFi package like a cell phone has for a Kindle Fire
wifi allows you to connect to a router. You still need an internet provider to source your content.
-
Iphone6 plus automatically turn off (frequently)and cannot use WIFI
Just bought Iphone6 Plus 16GB Gold on 15 Dec 2014 from The Australian official Apple website.
In this week, my phone turn it off automatically (very frequent, it seems like if i not use my phone, it will shut down)
and cannot normally turn on the phone, i can only turn it on through HOME BUTTON + TURN ON/OFF BUTTON.
And after i turn on the phone, the WIFI button become GREY COLOR, which means i cannot use WIFI, cannot turn on/off.
And i try to restore setting from the phone and also from iTunes through computer, it doesn't help.
Does anybody know what happen to my phone?hi,
so can I ask how do you solve this problem?
在 2015年1月10日,08:39,Apple Support Communities Updates <[email protected]> 写道:
You received a reply
coolbeanz has replied to your question. You can view the full discussion in Apple Support Communities.
Iphone6 plus automatically turn off (frequently)and cannot use WIFI
I have this same problem, but with an iPhone 6, 16GB Gold
Correct Answer Helpful Answer
Use the buttons above to tell coolbeanz and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to coolbeanz, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support -
When using wifi with iphone 4 does it use up your data allowance? Also when using wifi with iphone 4 does your phone automatically detect the wifi present and uses the wifi or o you have to physically turn on the wifi inorder not to use up data allowance?
Wifi does NOT use plan minutes or amounts - it is wholly independent of your data plan.
Wifi cannot connect if turned off, so yes, it must be on to connect. And, you may have to log on to a network if you have never done so before (it can remember networks once connected the first time, and then will automatically reconnect when next in range). -
I just bought a iphone 5 32GB White from Apple store. However, the first time i turn on my iphone, it cannot use WIFI to connect. Meanwhile, another device still can connect WIFI normally (example: computer, my another iphone 5 16GB)
Please help me
I tried many way to use WIFI on my iphone 5 with IOS 6.0.1. But cannot
_Turn off and on WIFI
_Reset Network Settings
_Update to IOS 6.0.2
Blah blah blah
P/s: because this is the first time my iphone turn on for active, so it has'nt connected with any Networks before. -
I cannot use tunes with windows 7. A 32 bit xp version was loaded from my prior computer. It will not uninstall. The 64 bit version will noit install.
I cannot use tunes with windows 7. A 32 bit xp version was loaded from my prior computer. It will not uninstall. The 64 bit version will noit install.
-
Is it normal that Apple TV 1st generation cannot use AirTunes with Apple TV 2nd generation or Airport express 2nd generation? I want to play music synced in my ATV 1st gen. to a nymber of speakers in the house. In the list of speakers I can see Apple TV itself and my two Airport Expresses 1st generation but not my Apple TV 2nd generation or my Airport express 2nd generation. For the ATV 2nd gen. I found a solution: when I enable the Airplay setting of XBMC which is installed on my ATV 2nd generation, then AirTunes in ATV 1st gen. sees the speaker "XBMS (Apple-TV)". Itunes can in my Macbook pro can use Airplay with all my speakers, i.e. ATV 1st gen., ATV 2nd gen., Airport Express 1st gen., Airport Express 2nd gen.
Last time I checked ATV1 could not use Airtunes to send audio to an AppleTV 2 or 3 - highly annoying as you think they would have kept backwards compatibiility for audio, but it seems Airplay is more than a superset of Airtunes.
AC -
I cannot use my ipad2 because the touch screen doesn't work at all. First I cannot unlock it or do anything in the screen!!!! Why?
Have you tried a reset To see if that fixes it ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
My (iPhone 4S) wifi toggle bar has grey out. I cannot use wifi anymore. What to do?
try the steps provided in the link below:
iOS: Wi-Fi settings grayed out or dim -
Cannot use comparisons with column column references in pool and cluste
Hi Experts,
I am facing an issue in a select statement written in 4.6 version and in that the table is a transparent table but when porting it to ECC6.0, it gives the follwing error:
You cannot use comparisons with column column references in pool and cluster tables:'A~MATNR'. refe
The select statement is as below:
SELECT akschl alifnr amatnr aekorg awerks aesokz
aknumh adatbi a~datab
bmtart bmatkl
b~yybcezndr " Commented as not required(IDE)
cwerks cmmsta c~herkl
INTO CORRESPONDING FIELDS OF TABLE gt_a017
FROM a017 AS a
INNER JOIN mara AS b
ON bmatnr = amatnr
INNER JOIN marc AS c
ON cmatnr = bmatnr
AND cwerks = awerks
INNER JOIN lfa1 AS d
ON dlifnr = alifnr
WHERE a~kappl = 'M' AND
a~lifnr IN s_lifnr AND
a~matnr IN s_matnr AND
a~ekorg IN s_ekorg AND
a~kschl = v_kschl AND
a~kschl = gv_kschl .
Kindly help me out in this as A017 is a pooled table in ECC 6.0 . Thanks in advance!!!
Thanks and Best Regards,
SahilHi Sahil,
Refer below code
SELECT KSCHL LIFNR MATNR EKORG WERKS ESOKZ
KNUMH DATBI DATAB
FROM A017
INTO IT_A017 " internal Table
WHERE KAPPL = 'M' AND
LIFNR IN S_LIFNR AND
MATNR IN S_MATNR AND
EKORG IN S_EKORG AND
* kschl = v_kschl AND
KSCHL = GV_KSCHL .
IF IT_A017[] IS NOT INITIAL.
SELECT MATNR MTART MATKL
FROM MARA
INTO TABLE IT_MARA" internal Table
FOR ALL ENTRIES IN IT_A017
WHERE MATNR = IT_A017-MATNR.
SELECT MATNR WERKS MMSTA HERKL
FROM MARC
INTO TABLE IT_MARC" internal Table
FOR ALL ENTRIES IN IT_A017
WHERE MATNR = IT_A017-MATNR AND
WERKS = IT_A017-WERKS.
SELECT LIFNR
FROM LFA1
INTO IT_LFA1" internal Table
FOR ALL ENTRIES IN IT_A017
WHERE LIFNR = IT_A017-LIFNR.
ENDIF.
After this use READ statement and fill the data in final internal table..
Please search on SCN for more information about how to use FOR ALL ENTRIES..
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya -
I will be staying with friends for a couple of weeks this summer. They have WiFi, and I am using an iMac (an Intel Apple) which has WiFi abilities, currently turned off. I also have an Airport Express. I'm hoping to be able to use my iMac to access the Internet while there. Any suggestions? I've never used the AirPort or WiFi before, other than with my Kindle.
If they have WiFi, you don't need the Airport Express if all you want to do is access the Internet. On the iMac, make sure that the WiFi icon is in the Menu Bar at the top right up near the Time. If you don't have it there, go to the Apple menu at the far left top on the MenuBar. Select System Preferences/Network/Then click on WiFi/Airport and check the box Show WiFi /Airport staus in menu bar. Now the WiFi/Airport icon should be in the Menubar.
When you get to your friends house, go WiFi/Airport in the Menubar and select "Turn Airport On" In the next window look for your friends WiFi Network and select it. You may need to put in a password if your friend has the network password protected. Put in the password and you should be all set. Your iMac should remember the network. Hope that helps. -
E6-00 and Belle update : Cannot use Wifi and LEAP ...
Upgraded the E6-00 yesterday. First issues arise and even after a full reset, it still does not work.
- Wifi connection using LEAP authentication
Network is found, popup to enter username and password, all is good. Except the phone keep trying to connect while I type the password and each time, it re-ask the username. In short I cannot use connect at all as I don't have time to enter both username and password before it loop.... No more wifi connection possible as it use this LEAP authentication. Any way to increase the connection retry timeout ?
- IMAP folder not found
Same config as under Anna, but under Belle, it does not find any folder for IMAP account (and yes, the mail root folder is right), refreshing the folder list, just do nothing.
- MAPS
Say that it's empty and need maps. Give few options:
* use OVI on the PC : OVI doesn't find MAP on the phone
* use wifi to download map : .... if wifi would work, why not
Anybody else got the same issue ? Or found solution ?
L.\
Solved!
Go to Solution.Upgraded the E6-00 yesterday. First issues arise and even after a full reset, it still does not work.
- Wifi connection using LEAP authentication
Network is found, popup to enter username and password, all is good. Except the phone keep trying to connect while I type the password and each time, it re-ask the username. In short I cannot use connect at all as I don't have time to enter both username and password before it loop.... No more wifi connection possible as it use this LEAP authentication. Any way to increase the connection retry timeout ?
Ok try to delete your apn, reset the device and resintall the OS. Don't restore any backup ans configure the WLAN apn: settings> connectivity> settings>destinations. Into the WLAN settings go to WI-fi security settings> in the fifrst field select EAP> in the second field EAP plugin settings > select EAP-LEAP.
This way the apn will work again
- IMAP folder not found
Same config as under Anna, but under Belle, it does not find any folder for IMAP account (and yes, the mail root folder is right), refreshing the folder list, just do nothing.
Please delete your mailboxes and configure them as you want. To create a IMAP access mailbox , for example Nokia Mail (outside of Messaging server) select Other. Put you credentials and choose Standard. You will see into Settings> your mailbox > sync content > Folder subscriptions> choose which folder to sync and it's done
- MAPS
Say that it's empty and need maps. Give few options:
* use OVI on the PC : OVI doesn't find MAP on the phone
* use wifi to download map : .... if wifi would work, why not
Anybody else got the same issue ? Or found solution ?
Please delete on mass memory the folder Cities and the file Qf, then open Maps and close the application. Verify that the folder Cities and the file Qf are again in E. Connect your device to Nokia Suite and redownload the cartography. -
Cannot change location with my iPod Touch - always Brussels!
I live in Belgium and set my iPod Touch for Brussels time zone. Great, but yesterday I arrived in JAPAN and even though I try to set the general "Date and Time" for Tokyo, the clocks all show the time for Bruxelles-- that is when I look at international time clocks, it shows the time I've set for TOKYO as the time for Bruxelles (Brussels) -- so when I set the time for 3pm in Tokyo then look at the international clock it says TOKYO is 8 hours later, 11:00 pm -- i.e. iPod Touch thinks I'm still in Brussels--
---when I go back to General settings time and date, yup, it is back to Brussels--
I even did a reset (not total, just basic settings) and NO CHANGE I can't get the iTouch to set the current date and time for TOKYO.
Why not? Is the January program download causing a problem? I wouldn't think so, but...
(I have been using the new programs since the day they were offered)
Any comments appreciated-- I travel lots and love the international clocks-- but I need them to be correct! Can't be a Brussels only iTouch!
Thanks, Steve Tuesday 12 February 2008 (Tokyo)!I live in Belgium and set my iPod Touch for Brussels time zone. Great, but yesterday I arrived in JAPAN and even though I try to set the general "Date and Time" for Tokyo, the clocks all show the time for Bruxelles-- that is when I look at international time clocks, it shows the time I've set for TOKYO as the time for Bruxelles (Brussels) -- so when I set the time for 3pm in Tokyo then look at the international clock it says TOKYO is 8 hours later, 11:00 pm -- i.e. iPod Touch thinks I'm still in Brussels--
when I go back to General settings time and date, yup, *it is back to Brussels*
I even did a reset (not total, just basic settings) and NO CHANGE I can't get the iTouch to set the current date and time for TOKYO.
Why not? Is the January program download causing a problem? I wouldn't think so, but...
(I have been using the new programs since the day they were offered)
Any comments appreciated-- I travel lots and love the international clocks-- but I need them to be correct! Can't be a Brussels only iTouch!
OK I solved this by using iTunes with my Mac to update the iTouch-- but what if I don't have my MAC on a trip? How to update the iPod and get the new destination to STICK?
Regards,
Steve
Tuesday 12 February 2008
Maybe you are looking for
-
Hi all. I am convinced someone in my neighborhood has compromised my current WEP encryption for my D-Link AirPlus Extreme G wireless network. I'd like to switch to WPA, and I know how to do it. The problem is that whenever I try to access 192.168.1.1
-
Some kde aps not found after update
I just did a massive (1gb) update last night (I know update more often!!) Most things seem to be fine, except several kde aps aren't found. Konqueror, dolphin and kopete are the ones that don't work so far. I searched the forums but didn't find anyth
-
ALV Lay out Font size to be increased by 1
Hi all pls help me out . how to increase the font size in ALV Layout after displaying.<b></b> i hope there should be a solution...
-
ever scince i bouth it i did not see the guy that sould it to me i used it for i while but the next day that apierd can anyone help me
-
hi all, i have created a layout for dispaly of PO number with order details in iw38 , but PO nos is not getting displayed nd some of my orders have POs also , plz tel wht mite be the reason? regrds pushpa