Cannot use Windows mail with PE 12 only shows express or adobe mail

Any suggestions?

windows mail  version 6.0 on Vista.  PE 12 gives only Express and Adobe as options. 
Thank you
mike

Similar Messages

  • Using windows vista with two users and I can only open books with adobe digital editions on one account?

    using windows vista with two users and I can only open books with adobe digital edition

    You must authorize the second computer with the same Adobe ID.
    There are sometimes issues with this registration: if you have them ....
    Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
    Uninstalling and reinstalling does not help.
    Unfortunately, it often then gives misleading error messages about what is wrong.
    A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
    This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
    Restart ADE, and then reauthorize with your (old) Adobe ID.

  • TS4463 I am using Windows Vista with Outlook 2007 and iCloud.  Everything has been great until this morning.  I'm suddenly getting the message "Set of folders cannot be opened.  The information store could not be opened.

    I am using Windows Vista with Outlook 2007 and iCloud.  Everything has been great until this morning.  I'm suddenly getting the message "Set of folders cannot be opened.  The information store could not be opened.  I tried running the repair utlity to repair the iCloud however I am still getting this error message.

    I tried rebooting.  It didn't change anything.

  • Sateillite A200-1A9: Issue with sending/receiving E-mail using Windows Mail

    Using Windows mail I have to close/open the programme to be able to send mails, they get stuck in the Outbox. By closing and reopening the programme the mail gets sent. Also the Blue figure 1 in brackets showning 1 unread mail in the Outbox is there all the time although there is no mails read or unread in the Outbox
    Not a server problem as all mails are going/receiving fine on my desktop.
    Pressing send and receive button does not help. although some of the time it will receive mails when pressing send/receive but will not send them
    I do have Norton Internet security 2007 and am getting fed up with the continuing problems that this seems to cause over the period 2004-7.
    Is there an issue with the Windows mail programme running with Vista that is known

    I think I have found a solution
    Please check this:
    Windows Mail will not Send or Receive mails
    http://support.toshiba-tro.de/kb0/TSB7701X30005R01.htm
    It seems that the update of Software Desktop SMS to the newest version will help to sort out this problem.

  • How to use Windows Mail with Firefox

    I want to use Windows Mail as my default e-mail program when using Firefox to browse the internet and initiate e-mail messages. How can I get Firefox to use Windows Mail? Right now, it is using Thunderbird, which I do not even have installed on my PC, and it is using the web e-mail Address Book and Sent folder on my ISP's web site, rather than being able to reference the Address Book and Sent folder on my PC.
    Thank you!

    See this: <br />
    http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

  • Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql Serve

    Hi
    Windows serv 2012 cluster on sql 2012 cluster with 2 instance. on works fine , Second instanc ewhen i try to creat DB a get this message. 
    Cannot use file  for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql
    Server does not have a dependency on it.
    CREATE DATABASE failed. Some file names listed could not be created. Check related errors. (Microsoft SQL Server, Error: 5184)
    Any help please
    kam
    KAMEL

    Hi Saurabh
    Exactly I have SQL SERVER 2012
    Failover Clustering   in windows server 2012 with two nodes with
    two instances and exactly I run them in the same server and each instance with
    three drives Backup, Data and log.   
    KAMEL

  • Using Windows Mail and BT Yahoo

    I use Windows Mail with an email address ending in @btinternet.com.
    I also have a BT Yahoo webmail account using the same email address.
    As I use Windows Mail most of all I've tended to keep the BT Yahoo Mail account as a "back up".
    Recently however I have noticed a few emails reach my BT Yahoo Webmail but do not appear in my Windows Mail inbox.
    I was embarrassed recently when an important message fell into this category and I missed it because I only log in to the webmail a couple of times a week.
    Does anyone else have this problem, or know why it happens
    In every case the messages have been from individuals, not from businesses.
    And in the case of one particular individual, a friend in the USA, all his recent messages have gone to the webmail account only and not reached the Windows Mail account.
    Thanks in advance for your kind help/advice/support

    kjk59 wrote:
    I use Windows Mail with an email address ending in @btinternet.com.
    I also have a BT Yahoo webmail account using the same email address.
    As I use Windows Mail most of all I've tended to keep the BT Yahoo Mail account as a "back up".
    Recently however I have noticed a few emails reach my BT Yahoo Webmail but do not appear in my Windows Mail inbox.
    I was embarrassed recently when an important message fell into this category and I missed it because I only log in to the webmail a couple of times a week.
    Does anyone else have this problem, or know why it happens
    In every case the messages have been from individuals, not from businesses.
    And in the case of one particular individual, a friend in the USA, all his recent messages have gone to the webmail account only and not reached the Windows Mail account.
    Thanks in advance for your kind help/advice/support
    Hi. Welcome to the forums.
    May I ask where these webmail emails appeared ? Were they in the Inbox, or perhaps the Spam folder or another folder you've added ?
    Only emails in the Inbox will arrive at Windows Mail. I assume you've set an advanced option within Windows Mail to "leave messages on server", and hence have all of your emails held in webmail ?
    It is possible that Windows Mail has a slightly corrupted index, which makes a note of the emails it has last received, and therefore not picked up the new ones. This index can be reset, but you could effectively start receiving all of the emails stored on the mail server again - which could take a long time.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • Overheating while using Windows XP with Bootcamp

    Hi,
    I bought a MacBook Pro last September 2009. The MacBook Pro came with Leopard but I installed Snow Leopard a couple of weeks later.
    I need to use some Windows-based programs so I am using Windows XP with Bootcamp. However, I notice a high overheating when using Windows on Bootcamp (especially on the left side of the keyboard). Until now, the system doesn't crash but the overheating is a big problem for typing. This problem does not appear while I work on Snow Leopard.
    Please, I would appreciate any help. I installed "SMCFanControl" but it only works under OS X (where there is not the problem). It doesn't control the fan on Windows under Bootcamp. Also, for this, I installed "SpeedFan" but it doesn't recognize the fans.
    Thanks in advance.

    A little solution that has helped me.
    install both
    Notebook Hardware Control (NHC)
    http://www.pbus-167.com/nhc/nhc.htm#anchor_download
    Notebook Hardware Control has a Max Battery setting when you right click on it's icon in the notification section on the task bar (lower right). Make sure to apply this setting.
    and as suggested by Kappy
    Input Remapper
    http://www.softpedia.com/get/System/OS-Enhancements/Input-Remapper.shtml
    This program allows you to adjust your fan speed without having to restart from Mac OS. Which is nice because with SMC if you close your macbook while running XP it will turn the fans off. Therefore you have to restart in Mac OS to turn the fan speeds back up.
    The combination of the two has kept my cpu in the 65c range while heavy gaming and 45c at idle.
    I have tried a lot of the ridiculous things that have been mentioned in both this thread and others. This solution has been an incredible relief because I certainly didn't want to get up every so often to run to the freezer or play over the air conditioner for several hours. I hope you have as much luck as I did.
    My Mac is a late 2009 Macbook pro and I'm running XP in bootcamp.
    Message was edited by: ensigne

  • HT3986 when i use windows 7 with macbook pro ,the fan work hardly,how do i fix it?

    when i use windows 7 with macbook pro ,the fan work hardly,how do i fix it?

    Use InputRemapper
    This is one or only utility I know, there are I am sure one or two others.
    And the weakest link in running Windows on Mac: lack of thermal/SMC fan control to manage air flow and heat!

  • "You cannot use this application with this version of OS X"

    Hi,
    I'm getting this message when I try to open .AVI files that I uploaded from my digital camera, but I'm posting it here instead of in the Quicktime section because I believe that the cause of the problem is more general. When researching this problem, I looked at the info panel for these .AVI files, and the app listed to open them was "Quicktime Player (default) (7.1.3)". But the actual version of Quicktime that I have installed is version 7.4. If I set the file's "Open With" app to be "Quicktime 7.4", it opens fine, but the "Open With" app reverts back to "Quicktime Player (default) (7.1.3)", making the problem come back. I've also noticed that if I right-click on other apps (a PDF file, for example), and choose "Open With" from the popup menu, that I see other versions of apps that no longer exist on my machine (Safari 2.0.4, for example). I think that files associated with these older app versions may be the cause of many of the "You cannot use this application with this version of OS X" issues that have been reported here. My question is where is this list of "installed" products maintained in OS X, and is there a way that I can edit it to remove those product versions that no longer exist on my system. In my particular instance, I'd like to remove "Quicktime 7.1.3" which should allow me to set the associated app for my .AVI files to be Quicktime 7.4 with no possibility of the association reverting to an earlier version that's not only incompatible with Leopard, but also not installed on my system.
    Thanks,
    Ken

    When you associate a file with an application, are you then clicking the "Change All" button? You can rebuild the LaunchServices database. Evidently the location of the command and the database have changed slightly in Leopard from what they were in Tiger. See this thread for the updated instructions:
    http://discussions.apple.com/thread.jspa?messageID=5730491
    Also, make sure you don't have the old applications archived somewhere. I've been astonished in the past at just how enterprising the system can be in finding some program squirreled away in an obscure backup folder and listing it as an option to open something.
    Francine
    Francine
    Schwieder

  • I've deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message that 'Adobe Reader is blocked because it is out of date'. Using Windows XP with the latest updates (SP3).

    I've deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message that 'Adobe Reader is blocked because it is out of date'. Using Windows XP with the latest updates (SP3).

    Screenshots attached to email replies will not make it back to the forum; you need to login to the forum and post it in your topic using the camera icon in the editor.
    Google Chrome is a problem:
    if you use Chrome's own PDF viewer, the results are unpredictable.
    if you use the Adobe Reader plugin with Chrome, it may reject (block) it if it is not the latest version.  Reader 11.0.08 is the latest version for Windows XP, but Chrome may insist on the current version 11.0.10.
    My suggestion; use a different browser!

  • HT204291 Help! I cannot see the Airplay symbol on any of my devices anymore!  I have tried following all guides and troubleshooting, but to no avail. Just cannot use the AppleTV with any of my devices.

    Help! I cannot see the Airplay symbol on any of my devices anymore!  I have tried following all guides and troubleshooting, but to no avail. Just cannot use the AppleTV with any of my devices.

    Thanks for the link. It didn't work at first on any of the devices but then I decided to enter a manual DNS instead of an automatic configuration. Then followed the steps again from your link and it worked.
    It is not stable though as I need to reset the device for it to see the airplay. But when it is connected it stays connected for 30 minutes approx.
    Any other suggestions to keep it stable would be fantastic but at least in the meantime I have a workaround.
    Thanks

  • Problems in using Windows Explorer with VPC Virtual PC?

    Has anybody experienced problems in using Windows Explorer with VPC Virtual PC?
    Lacking any "forbidden" or "appropriate usage" guidelines, I regularly use Windows Explorer (Windows 2000) to transfer file from the desktop. I have occasionally sensed that this might be wrong. Today I inadvertently clicked the MAC harddrive instead of the Desktop (within Windows Explorer) and caused all manner of mischief.
    Any other views please?

    Let me correct this:
    I regularly use Windows Explorer (Windows 2000) to transfer files from the "Mac" desktop
    Any ideas please Virtual PC VPC users?

  • Hi. I use windows Xp with service pack 3. I have the latest itunes 11.1 installed in it. I am able to add music or apps to my library but not just videos. Please help.

    Hi. I use windows Xp with service pack 3. I have the latest itunes 11.1 installed in it. I own ipad mini. I am able to add music or apps to my library but not just videos. I have already tried removing & reinstalling it. I also have tried with various formats like MPEG, MOV, MP4. Please help.

    I already have what you ( ClayandLonnie ) have suggested with the preferences>Shareing Preferences set to share all.
    I have tried turing it off, and then back on.
    I have tried just sharing specific items and this still did not work.
    I am going to try stepping back down to 11.04.4 as previously suggested by TheDarkCanuck when I get home tomorrow. (maybe saturday).  I am just leary about having to recreate all my libraries and how long that might take.  I have over 1.5 TB of Music and Video, that is why I would like to get it working in the current version.
    Just because I don't have a Mac, it seems that this is not being taken as a real problem for the windows 7 users (maybe it is specific to 64bit).  I may try the 32bit version to see if that fixes it first.  Unless someone else has, and want to chime in.

  • I cannot use downloaded ringtons with my Contacts.Ringtones downloaded by programme  Ringtones

      I cannot use downloaded  ringtons with my Contacts.Ringtones downloaded by programme  Ringtones

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Also see:
    Reinstall OS X Without Erasing the Drive
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

Maybe you are looking for